diff options
Diffstat (limited to 'circuitpython/py/circuitpy_mpconfig.h')
| -rw-r--r-- | circuitpython/py/circuitpy_mpconfig.h | 578 |
1 files changed, 578 insertions, 0 deletions
diff --git a/circuitpython/py/circuitpy_mpconfig.h b/circuitpython/py/circuitpy_mpconfig.h new file mode 100644 index 0000000..1c44305 --- /dev/null +++ b/circuitpython/py/circuitpy_mpconfig.h @@ -0,0 +1,578 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Dan Halbert for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +// This file contains settings that are common across CircuitPython ports, to make +// sure that the same feature set and settings are used, such as in atmel-samd +// and nrf. + +#ifndef __INCLUDED_MPCONFIG_CIRCUITPY_H +#define __INCLUDED_MPCONFIG_CIRCUITPY_H + +#include <stdint.h> +#include <stdatomic.h> + +// This is CircuitPython. +#define CIRCUITPY 1 + +// REPR_C encodes qstrs, 31-bit ints, and 30-bit floats in a single 32-bit word. +#ifndef MICROPY_OBJ_REPR +#define MICROPY_OBJ_REPR (MICROPY_OBJ_REPR_C) +#endif + +// options to control how MicroPython is built +// TODO(tannewt): Reduce this number if we want the REPL to function under 512 +// free bytes. +// #define MICROPY_ALLOC_PARSE_RULE_INIT (64) + +// These critical-section macros are used only a few places in MicroPython, but +// we need to provide actual implementations. +extern void common_hal_mcu_disable_interrupts(void); +extern void common_hal_mcu_enable_interrupts(void); +#define MICROPY_BEGIN_ATOMIC_SECTION() (common_hal_mcu_disable_interrupts(), 0) +#define MICROPY_END_ATOMIC_SECTION(state) ((void)state, common_hal_mcu_enable_interrupts()) + +// Sorted alphabetically for easy finding. +// +// default is 128; consider raising to reduce fragmentation. +#define MICROPY_ALLOC_PARSE_CHUNK_INIT (16) +// default is 512. +#define MICROPY_ALLOC_PATH_MAX (256) +#define MICROPY_CAN_OVERRIDE_BUILTINS (1) +#define MICROPY_COMP_CONST (1) +#define MICROPY_COMP_DOUBLE_TUPLE_ASSIGN (1) +#define MICROPY_COMP_MODULE_CONST (1) +#define MICROPY_COMP_TRIPLE_TUPLE_ASSIGN (0) +#define MICROPY_DEBUG_PRINTERS (0) +#define MICROPY_EMIT_INLINE_THUMB (CIRCUITPY_ENABLE_MPY_NATIVE) +#define MICROPY_EMIT_THUMB (CIRCUITPY_ENABLE_MPY_NATIVE) +#define MICROPY_EMIT_X64 (0) +#define MICROPY_ENABLE_DOC_STRING (0) +#define MICROPY_ENABLE_FINALISER (1) +#define MICROPY_ENABLE_GC (1) +#define MICROPY_ENABLE_SOURCE_LINE (1) +#define MICROPY_EPOCH_IS_1970 (1) +#define MICROPY_ERROR_REPORTING (MICROPY_ERROR_REPORTING_NORMAL) +#define MICROPY_FLOAT_HIGH_QUALITY_HASH (0) +#define MICROPY_FLOAT_IMPL (MICROPY_FLOAT_IMPL_FLOAT) +#define MICROPY_GC_ALLOC_THRESHOLD (0) +#define MICROPY_HELPER_LEXER_UNIX (0) +#define MICROPY_HELPER_REPL (1) +#define MICROPY_KBD_EXCEPTION (1) +#define MICROPY_MEM_STATS (0) +#define MICROPY_MODULE_BUILTIN_INIT (1) +#define MICROPY_NONSTANDARD_TYPECODES (0) +#define MICROPY_OPT_COMPUTED_GOTO (1) +#define MICROPY_OPT_COMPUTED_GOTO_SAVE_SPACE (CIRCUITPY_COMPUTED_GOTO_SAVE_SPACE) +#define MICROPY_OPT_LOAD_ATTR_FAST_PATH (CIRCUITPY_OPT_LOAD_ATTR_FAST_PATH) +#define MICROPY_OPT_MAP_LOOKUP_CACHE (CIRCUITPY_OPT_MAP_LOOKUP_CACHE) +#define MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE (CIRCUITPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE) +#define MICROPY_PERSISTENT_CODE_LOAD (1) + +#define MICROPY_PY_ARRAY (1) +#define MICROPY_PY_ARRAY_SLICE_ASSIGN (1) +#define MICROPY_PY_ATTRTUPLE (1) + +#define MICROPY_PY_BUILTINS_BYTEARRAY (1) +#define MICROPY_PY_BUILTINS_ENUMERATE (1) +#define MICROPY_PY_BUILTINS_FILTER (1) +#define MICROPY_PY_BUILTINS_HELP (1) +#define MICROPY_PY_BUILTINS_HELP_MODULES (1) +#define MICROPY_PY_BUILTINS_INPUT (1) +#define MICROPY_PY_BUILTINS_MEMORYVIEW (1) +#define MICROPY_PY_BUILTINS_MIN_MAX (1) +#define MICROPY_PY_BUILTINS_PROPERTY (1) +#define MICROPY_PY_BUILTINS_REVERSED (1) +#define MICROPY_PY_BUILTINS_ROUND_INT (1) +#define MICROPY_PY_BUILTINS_SET (1) +#define MICROPY_PY_BUILTINS_SLICE (1) +#define MICROPY_PY_BUILTINS_SLICE_ATTRS (1) +#define MICROPY_PY_BUILTINS_SLICE_INDICES (1) +#define MICROPY_PY_BUILTINS_STR_UNICODE (1) + +#define MICROPY_PY_CMATH (0) +#define MICROPY_PY_COLLECTIONS (1) +#define MICROPY_PY_DESCRIPTORS (1) +#define MICROPY_PY_IO_FILEIO (1) +#define MICROPY_PY_GC (1) +// Supplanted by shared-bindings/math +#define MICROPY_PY_MATH (0) +#define MICROPY_PY_MICROPYTHON_MEM_INFO (0) +// Supplanted by shared-bindings/struct +#define MICROPY_PY_STRUCT (0) +#define MICROPY_PY_SYS (1) +#define MICROPY_PY_SYS_MAXSIZE (1) +#define MICROPY_PY_SYS_STDFILES (1) +// Supplanted by shared-bindings/random +#define MICROPY_PY_URANDOM (0) +#define MICROPY_PY_URANDOM_EXTRA_FUNCS (0) +#define MICROPY_PY___FILE__ (1) + +#define MICROPY_QSTR_BYTES_IN_HASH (1) +#define MICROPY_REPL_AUTO_INDENT (1) +#define MICROPY_REPL_EVENT_DRIVEN (0) +#define MICROPY_ENABLE_PYSTACK (1) +#define MICROPY_STACK_CHECK (1) +#define MICROPY_STREAMS_NON_BLOCK (1) +#ifndef MICROPY_USE_INTERNAL_PRINTF +#define MICROPY_USE_INTERNAL_PRINTF (1) +#endif + +// fatfs configuration used in ffconf.h +// +// 1 = SFN/ANSI 437=LFN/U.S.(OEM) +#define MICROPY_FATFS_ENABLE_LFN (1) +// Code page is ignored because unicode is enabled. +// Don't use parens on the value below because it gets combined with a prefix in +// the preprocessor. +#define MICROPY_FATFS_LFN_CODE_PAGE 437 +#define MICROPY_FATFS_USE_LABEL (1) +#define MICROPY_FATFS_RPATH (2) +#define MICROPY_FATFS_MULTI_PARTITION (1) +#define MICROPY_FATFS_LFN_UNICODE 2 // UTF-8 + +// Only enable this if you really need it. It allocates a byte cache of this size. +// #define MICROPY_FATFS_MAX_SS (4096) + +#define FILESYSTEM_BLOCK_SIZE (512) + +#define MICROPY_VFS (1) +#define MICROPY_VFS_FAT (MICROPY_VFS) +#define MICROPY_READER_VFS (MICROPY_VFS) + +// type definitions for the specific machine + +#define BYTES_PER_WORD (4) + +#define MICROPY_MAKE_POINTER_CALLABLE(p) ((void *)((mp_uint_t)(p) | 1)) + +// Track stack usage. Expose results via ustack module. +#define MICROPY_MAX_STACK_USAGE (0) + +#define UINT_FMT "%u" +#define INT_FMT "%d" +#ifdef __LP64__ +typedef long mp_int_t; // must be pointer size +typedef unsigned long mp_uint_t; // must be pointer size +#else +// These are definitions for machines where sizeof(int) == sizeof(void*), +// regardless of actual size. +typedef int mp_int_t; // must be pointer size +typedef unsigned int mp_uint_t; // must be pointer size +#endif +#if __GNUC__ >= 10 // on recent gcc versions we can check that this is so +_Static_assert(sizeof(mp_int_t) == sizeof(void *)); +_Static_assert(sizeof(mp_uint_t) == sizeof(void *)); +#endif +typedef long mp_off_t; + +#define MP_PLAT_PRINT_STRN(str, len) mp_hal_stdout_tx_strn_cooked(str, len) + +#define mp_type_fileio mp_type_vfs_fat_fileio +#define mp_type_textio mp_type_vfs_fat_textio + +#define mp_import_stat mp_vfs_import_stat +#define mp_builtin_open_obj mp_vfs_open_obj + + +// extra built in names to add to the global namespace +#define MICROPY_PORT_BUILTINS \ + { MP_OBJ_NEW_QSTR(MP_QSTR_help), (mp_obj_t)&mp_builtin_help_obj }, \ + { MP_OBJ_NEW_QSTR(MP_QSTR_input), (mp_obj_t)&mp_builtin_input_obj }, \ + { MP_OBJ_NEW_QSTR(MP_QSTR_open), (mp_obj_t)&mp_builtin_open_obj }, + +////////////////////////////////////////////////////////////////////////////////////////////////// +// board-specific definitions, which control and may override definitions below. +#include "mpconfigboard.h" + +// Turning off FULL_BUILD removes some functionality to reduce flash size on tiny SAMD21s +#define MICROPY_BUILTIN_METHOD_CHECK_SELF_ARG (CIRCUITPY_FULL_BUILD) +#ifndef MICROPY_CPYTHON_COMPAT +#define MICROPY_CPYTHON_COMPAT (CIRCUITPY_FULL_BUILD) +#endif +#define MICROPY_PY_BUILTINS_POW3 (CIRCUITPY_BUILTINS_POW3) +#define MICROPY_PY_FSTRINGS (1) +#define MICROPY_MODULE_WEAK_LINKS (0) +#define MICROPY_PY_ALL_SPECIAL_METHODS (CIRCUITPY_FULL_BUILD) +#ifndef MICROPY_PY_BUILTINS_COMPLEX +#define MICROPY_PY_BUILTINS_COMPLEX (CIRCUITPY_FULL_BUILD) +#endif +#define MICROPY_PY_BUILTINS_FROZENSET (CIRCUITPY_FULL_BUILD) +#define MICROPY_PY_BUILTINS_STR_CENTER (CIRCUITPY_FULL_BUILD) +#define MICROPY_PY_BUILTINS_STR_PARTITION (CIRCUITPY_FULL_BUILD) +#define MICROPY_PY_BUILTINS_STR_SPLITLINES (CIRCUITPY_FULL_BUILD) +#ifndef MICROPY_PY_COLLECTIONS_ORDEREDDICT +#define MICROPY_PY_COLLECTIONS_ORDEREDDICT (CIRCUITPY_FULL_BUILD) +#endif +#define MICROPY_PY_URE_MATCH_GROUPS (CIRCUITPY_RE) +#define MICROPY_PY_URE_MATCH_SPAN_START_END (CIRCUITPY_RE) +#define MICROPY_PY_URE_SUB (CIRCUITPY_RE) + +#define CIRCUITPY_MICROPYTHON_ADVANCED (CIRCUITPY_FULL_BUILD) + +#ifndef MICROPY_FATFS_EXFAT +#define MICROPY_FATFS_EXFAT (CIRCUITPY_FULL_BUILD) +#endif + +// LONGINT_IMPL_xxx are defined in the Makefile. +// +#ifdef LONGINT_IMPL_NONE +#define MICROPY_LONGINT_IMPL (MICROPY_LONGINT_IMPL_NONE) +#endif + +#ifdef LONGINT_IMPL_MPZ +#define MICROPY_LONGINT_IMPL (MICROPY_LONGINT_IMPL_MPZ) +#define MP_SSIZE_MAX (0x7fffffff) +#endif + +#ifdef LONGINT_IMPL_LONGLONG +#define MICROPY_LONGINT_IMPL (MICROPY_LONGINT_IMPL_LONGLONG) +#define MP_SSIZE_MAX (0x7fffffff) +#endif + +#ifndef MICROPY_PY_REVERSE_SPECIAL_METHODS +#define MICROPY_PY_REVERSE_SPECIAL_METHODS (CIRCUITPY_ULAB || CIRCUITPY_FULL_BUILD) +#endif + +#if INTERNAL_FLASH_FILESYSTEM == 0 && QSPI_FLASH_FILESYSTEM == 0 && SPI_FLASH_FILESYSTEM == 0 && !DISABLE_FILESYSTEM +#error No *_FLASH_FILESYSTEM set! +#endif + +// Default board buses. + +#ifndef CIRCUITPY_BOARD_I2C +#if defined(DEFAULT_I2C_BUS_SCL) && defined(DEFAULT_I2C_BUS_SDA) +#define CIRCUITPY_BOARD_I2C (1) +#define CIRCUITPY_BOARD_I2C_PIN {{.scl = DEFAULT_I2C_BUS_SCL, .sda = DEFAULT_I2C_BUS_SDA}} +#else +#define CIRCUITPY_BOARD_I2C (0) +#endif +#endif + +#ifndef CIRCUITPY_BOARD_SPI +#if defined(DEFAULT_SPI_BUS_SCK) && defined(DEFAULT_SPI_BUS_MOSI) && defined(DEFAULT_SPI_BUS_MISO) +#define CIRCUITPY_BOARD_SPI (1) +#define CIRCUITPY_BOARD_SPI_PIN {{.clock = DEFAULT_SPI_BUS_SCK, .mosi = DEFAULT_SPI_BUS_MOSI, .miso = DEFAULT_SPI_BUS_MISO}} +#else +#define CIRCUITPY_BOARD_SPI (0) +#endif +#endif + +#ifndef CIRCUITPY_BOARD_UART +#if defined(DEFAULT_UART_BUS_TX) && defined(DEFAULT_UART_BUS_RX) +#define CIRCUITPY_BOARD_UART (1) +#define CIRCUITPY_BOARD_UART_PIN {{.tx = DEFAULT_UART_BUS_TX, .rx = DEFAULT_UART_BUS_RX}} +#define BOARD_UART_ROOT_POINTER mp_obj_t board_uart_bus; +#else +#define CIRCUITPY_BOARD_UART (0) +#define BOARD_UART_ROOT_POINTER +#endif +#else +#define BOARD_UART_ROOT_POINTER mp_obj_t board_uart_bus; +#endif + +// These CIRCUITPY_xxx values should all be defined in the *.mk files as being on or off. +// So if any are not defined in *.mk, they'll throw an error here. + +#if CIRCUITPY_DISPLAYIO +#ifndef CIRCUITPY_DISPLAY_LIMIT +#define CIRCUITPY_DISPLAY_LIMIT (1) +#endif + +// Framebuffer area size in bytes. Rounded down to power of four for alignment. +#ifndef CIRCUITPY_DISPLAY_AREA_BUFFER_SIZE +#define CIRCUITPY_DISPLAY_AREA_BUFFER_SIZE (128) +#endif + +#else +#define CIRCUITPY_DISPLAY_LIMIT (0) +#define CIRCUITPY_DISPLAY_AREA_BUFFER_SIZE (0) +#endif + +#if CIRCUITPY_GAMEPADSHIFT +// Scan gamepad every 32ms +#define CIRCUITPY_GAMEPAD_TICKS 0x1f +#define GAMEPAD_ROOT_POINTERS mp_obj_t gamepad_singleton; +#else +#define GAMEPAD_ROOT_POINTERS +#endif + +#if CIRCUITPY_KEYPAD +#define KEYPAD_ROOT_POINTERS mp_obj_t keypad_scanners_linked_list; +#else +#define KEYPAD_ROOT_POINTERS +#endif + +#if CIRCUITPY_MEMORYMONITOR +#define MEMORYMONITOR_ROOT_POINTERS mp_obj_t active_allocationsizes; \ + mp_obj_t active_allocationalarms; +#else +#define MEMORYMONITOR_ROOT_POINTERS +#endif + +// This is not a top-level module; it's microcontroller.nvm. +#if CIRCUITPY_NVM +extern const struct _mp_obj_module_t nvm_module; +#endif + +// Following modules are implemented in either extmod or py directory. + +#define MICROPY_PY_UBINASCII CIRCUITPY_BINASCII + +#define MICROPY_PY_UERRNO CIRCUITPY_ERRNO +// Uses about 80 bytes. +#define MICROPY_PY_UERRNO_ERRORCODE CIRCUITPY_ERRNO + +#define MICROPY_PY_URE CIRCUITPY_RE + +#if CIRCUITPY_JSON +#define MICROPY_PY_UJSON (1) +#define MICROPY_PY_IO (1) +#else +#ifndef MICROPY_PY_IO +// We don't need MICROPY_PY_IO unless someone else wants it. +#define MICROPY_PY_IO (0) +#endif +#endif + +#ifndef ULAB_SUPPORTS_COMPLEX +#define ULAB_SUPPORTS_COMPLEX (0) +#endif + +#if CIRCUITPY_ULAB +// ulab requires reverse special methods +#if defined(MICROPY_PY_REVERSE_SPECIAL_METHODS) && !MICROPY_PY_REVERSE_SPECIAL_METHODS +#error "ulab requires MICROPY_PY_REVERSE_SPECIAL_METHODS" +#endif +#endif + +#if CIRCUITPY_WIFI +#define WIFI_MONITOR_ROOT_POINTERS mp_obj_t wifi_monitor_singleton; +#else +#define WIFI_MONITOR_ROOT_POINTERS +#endif + +// Define certain native modules with weak links so they can be replaced with Python +// implementations. This list may grow over time. + +#define MICROPY_PORT_BUILTIN_MODULE_WEAK_LINKS + +// Native modules that are weak links can be accessed directly +// by prepending their name with an underscore. This list should correspond to +// MICROPY_PORT_BUILTIN_MODULE_WEAK_LINKS, assuming you want the native modules +// to be accessible when overriden. + +#define MICROPY_PORT_BUILTIN_MODULE_ALT_NAMES + +// This is an inclusive list that should correspond to the CIRCUITPY_XXX list above, +// including dependencies. +// Some of these definitions will be blank depending on what is turned on and off. +// Some are omitted because they're in MICROPY_PORT_BUILTIN_MODULE_WEAK_LINKS above. + +#define MICROPY_PORT_BUILTIN_MODULES_STRONG_LINKS + +// If weak links are enabled, just include strong links in the main list of modules, +// and also include the underscore alternate names. +#if MICROPY_MODULE_WEAK_LINKS +#define MICROPY_PORT_BUILTIN_MODULES \ + MICROPY_PORT_BUILTIN_MODULES_STRONG_LINKS \ + MICROPY_PORT_BUILTIN_MODULE_ALT_NAMES +#else +// If weak links are disabled, included both strong and potentially weak lines +#define MICROPY_PORT_BUILTIN_MODULES \ + MICROPY_PORT_BUILTIN_MODULES_STRONG_LINKS \ + MICROPY_PORT_BUILTIN_MODULE_WEAK_LINKS +#endif + +// We need to provide a declaration/definition of alloca() +#include <alloca.h> + +#define MP_STATE_PORT MP_STATE_VM + +#include "supervisor/flash_root_pointers.h" + +// From supervisor/memory.c +struct _supervisor_allocation_node; + +#define CIRCUITPY_COMMON_ROOT_POINTERS \ + FLASH_ROOT_POINTERS \ + KEYPAD_ROOT_POINTERS \ + GAMEPAD_ROOT_POINTERS \ + BOARD_UART_ROOT_POINTER \ + WIFI_MONITOR_ROOT_POINTERS \ + MEMORYMONITOR_ROOT_POINTERS \ + vstr_t *repl_line; \ + mp_obj_t pew_singleton; \ + mp_obj_t rtc_time_source; \ + const char *readline_hist[8]; \ + struct _supervisor_allocation_node *first_embedded_allocation; \ + +void supervisor_run_background_tasks_if_tick(void); +#define RUN_BACKGROUND_TASKS (supervisor_run_background_tasks_if_tick()) + +#define MICROPY_VM_HOOK_LOOP RUN_BACKGROUND_TASKS; +#define MICROPY_VM_HOOK_RETURN RUN_BACKGROUND_TASKS; + +// CIRCUITPY_AUTORELOAD_DELAY_MS = 0 will completely disable autoreload. +#ifndef CIRCUITPY_AUTORELOAD_DELAY_MS +#define CIRCUITPY_AUTORELOAD_DELAY_MS 750 +#endif + +#ifndef CIRCUITPY_FILESYSTEM_FLUSH_INTERVAL_MS +#define CIRCUITPY_FILESYSTEM_FLUSH_INTERVAL_MS 1000 +#endif + +#ifndef CIRCUITPY_PYSTACK_SIZE +#define CIRCUITPY_PYSTACK_SIZE 1536 +#endif + +// Wait this long before sleeping immediately after startup, to see if we are connected via USB or BLE. +#ifndef CIRCUITPY_WORKFLOW_CONNECTION_SLEEP_DELAY +#define CIRCUITPY_WORKFLOW_CONNECTION_SLEEP_DELAY 5 +#endif + +#ifndef CIRCUITPY_PROCESSOR_COUNT +#define CIRCUITPY_PROCESSOR_COUNT (1) +#endif + +#ifndef CIRCUITPY_STATUS_LED_POWER_INVERTED +#define CIRCUITPY_STATUS_LED_POWER_INVERTED (0) +#endif + +#define CIRCUITPY_BOOT_OUTPUT_FILE "/boot_out.txt" + +#ifndef CIRCUITPY_BOOT_COUNTER +#define CIRCUITPY_BOOT_COUNTER 0 +#endif + +#if !defined(CIRCUITPY_INTERNAL_NVM_SIZE) && CIRCUITPY_BOOT_COUNTER != 0 +#error "boot counter requires CIRCUITPY_NVM enabled" +#endif + +#define CIRCUITPY_VERBOSE_BLE 0 + +// This trades ~1k flash space (1) for that much in RAM plus the cost to compute +// the values once on init (0). Only turn it off, when you really need the flash +// space and are willing to trade the RAM. +#ifndef CIRCUITPY_PRECOMPUTE_QSTR_ATTR +#define CIRCUITPY_PRECOMPUTE_QSTR_ATTR (1) +#endif + +// Display the Blinka logo in the REPL on displayio displays. +#ifndef CIRCUITPY_REPL_LOGO +#define CIRCUITPY_REPL_LOGO (1) +#endif + +// USB settings + +// Debug level for TinyUSB. Only outputs over debug UART so it doesn't cause +// additional USB logging. +#ifndef CIRCUITPY_DEBUG_TINYUSB +#define CIRCUITPY_DEBUG_TINYUSB 0 +#endif + +#ifndef CIRCUITPY_USB_DEVICE_INSTANCE +#define CIRCUITPY_USB_DEVICE_INSTANCE 0 +#endif + +#ifndef CIRCUITPY_USB_HOST_INSTANCE +#define CIRCUITPY_USB_HOST_INSTANCE -1 +#endif + +// If the port requires certain USB endpoint numbers, define these in mpconfigport.h. + +#ifndef USB_CDC_EP_NUM_NOTIFICATION +#define USB_CDC_EP_NUM_NOTIFICATION (0) +#endif + +#ifndef USB_CDC_EP_NUM_DATA_OUT +#define USB_CDC_EP_NUM_DATA_OUT (0) +#endif + +#ifndef USB_CDC_EP_NUM_DATA_IN +#define USB_CDC_EP_NUM_DATA_IN (0) +#endif + +#ifndef USB_CDC2_EP_NUM_NOTIFICATION +#define USB_CDC2_EP_NUM_NOTIFICATION (0) +#endif + +#ifndef USB_CDC2_EP_NUM_DATA_OUT +#define USB_CDC2_EP_NUM_DATA_OUT (0) +#endif + +#ifndef USB_CDC2_EP_NUM_DATA_IN +#define USB_CDC2_EP_NUM_DATA_IN (0) +#endif + +#ifndef USB_MSC_EP_NUM_OUT +#define USB_MSC_EP_NUM_OUT (0) +#endif + +#ifndef USB_MSC_EP_NUM_IN +#define USB_MSC_EP_NUM_IN (0) +#endif + +#ifndef USB_HID_EP_NUM_OUT +#define USB_HID_EP_NUM_OUT (0) +#endif + +#ifndef USB_HID_EP_NUM_IN +#define USB_HID_EP_NUM_IN (0) +#endif + +// The most complicated device currently known of is the head and eye tracker, which requires 5 +// report ids. +// https://usb.org/sites/default/files/hutrr74_-_usage_page_for_head_and_eye_trackers_0.pdf +// The default descriptors only use 1, so that is the minimum. +#ifndef CIRCUITPY_USB_HID_MAX_REPORT_IDS_PER_DESCRIPTOR +#define CIRCUITPY_USB_HID_MAX_REPORT_IDS_PER_DESCRIPTOR (6) +#elif CIRCUITPY_USB_HID_MAX_REPORT_IDS_PER_DESCRIPTOR < 1 +#error "CIRCUITPY_USB_HID_MAX_REPORT_IDS_PER_DESCRIPTOR must be at least 1" +#endif + +#ifndef USB_MIDI_EP_NUM_OUT +#define USB_MIDI_EP_NUM_OUT (0) +#endif + +#ifndef USB_MIDI_EP_NUM_IN +#define USB_MIDI_EP_NUM_IN (0) +#endif + +#ifndef MICROPY_WRAP_MP_MAP_LOOKUP +#define MICROPY_WRAP_MP_MAP_LOOKUP PLACE_IN_ITCM +#endif + +#ifndef MICROPY_WRAP_MP_BINARY_OP +#define MICROPY_WRAP_MP_BINARY_OP PLACE_IN_ITCM +#endif + +#ifndef MICROPY_WRAP_MP_EXECUTE_BYTECODE +#define MICROPY_WRAP_MP_EXECUTE_BYTECODE PLACE_IN_ITCM +#endif + +#define MICROPY_PY_OPTIMIZE_PROPERTY_FLASH_SIZE (CIRCUITPY_OPTIMIZE_PROPERTY_FLASH_SIZE) + +#endif // __INCLUDED_MPCONFIG_CIRCUITPY_H |