add circuitpython code

3 files changed, 302 insertions, 0 deletions

diff --git a/circuitpython/lib/tinyusb/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h b/circuitpython/lib/tinyusb/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h
new file mode 100644
index 0000000..f42c7d6
--- /dev/null
+++ b/circuitpython/lib/tinyusb/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h
@@ -0,0 +1,122 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022, Jerzy Kasenberg
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED
+#define LED_PORT              GPIOB
+#define LED_PIN               GPIO_PIN_5
+#define LED_STATE_ON          1
+
+// Button
+#define BUTTON_PORT           GPIOC
+#define BUTTON_PIN            GPIO_PIN_4
+#define BUTTON_STATE_ACTIVE   0
+
+// UART Enable for STLink VCOM
+#define UART_DEV              USART1
+#define UART_CLK_EN           __HAL_RCC_USART1_CLK_ENABLE
+#define UART_GPIO_PORT        GPIOB
+#define UART_GPIO_AF          GPIO_AF7_USART1
+#define UART_TX_PIN           GPIO_PIN_6
+#define UART_RX_PIN           GPIO_PIN_7
+
+
+//--------------------------------------------------------------------+
+// RCC Clock
+//--------------------------------------------------------------------+
+static inline void board_clock_init(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+
+  // Initializes the CPU, AHB and APB busses clocks
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState       = RCC_HSE_ON;
+  RCC_OscInitStruct.HSI48State     = RCC_HSI48_ON;
+  RCC_OscInitStruct.PLL.PLLState   = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource  = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM       = RCC_PLLM_DIV4;
+  RCC_OscInitStruct.PLL.PLLN       = 24;
+  RCC_OscInitStruct.PLL.PLLP       = RCC_PLLP_DIV4;
+  RCC_OscInitStruct.PLL.PLLQ       = RCC_PLLQ_DIV4;
+  RCC_OscInitStruct.PLL.PLLR       = RCC_PLLR_DIV3;
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  // Initializes the CPU, AHB and APB busses clocks
+  RCC_ClkInitStruct.ClockType      = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource   = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider  = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3);
+
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
+  PeriphClkInit.UsbClockSelection    = RCC_USBCLKSOURCE_HSI48;
+  HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) ;
+
+#if 0 // TODO need to check if USB clock is enabled
+  /* Enable HSI48 */
+  memset(&RCC_OscInitStruct, 0, sizeof(RCC_OscInitStruct));
+
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48;
+  RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  /*Enable CRS Clock*/
+  RCC_CRSInitTypeDef RCC_CRSInitStruct= {0};
+  __HAL_RCC_CRS_CLK_ENABLE();
+
+  /* Default Synchro Signal division factor (not divided) */
+  RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1;
+
+  /* Set the SYNCSRC[1:0] bits according to CRS_Source value */
+  RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB;
+
+  /* HSI48 is synchronized with USB SOF at 1KHz rate */
+  RCC_CRSInitStruct.ReloadValue =  __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000, 1000);
+  RCC_CRSInitStruct.ErrorLimitValue = RCC_CRS_ERRORLIMIT_DEFAULT;
+
+  /* Set the TRIM[5:0] to the default value */
+  RCC_CRSInitStruct.HSI48CalibrationValue = RCC_CRS_HSI48CALIBRATION_DEFAULT;
+
+  /* Start automatic synchronization */
+  HAL_RCCEx_CRSConfig(&RCC_CRSInitStruct);
+#endif
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */
diff --git a/circuitpython/lib/tinyusb/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.mk b/circuitpython/lib/tinyusb/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.mk
new file mode 100644
index 0000000..d6adc6b
--- /dev/null
+++ b/circuitpython/lib/tinyusb/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.mk
@@ -0,0 +1,9 @@
+CFLAGS += \
+	-DSTM32WB55xx
+
+LD_FILE = $(BOARD_PATH)/stm32wb55xx_flash_cm4.ld
+
+SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32wb55xx_cm4.s
+
+# For flash-jlink target
+JLINK_DEVICE = STM32WB55RG
diff --git a/circuitpython/lib/tinyusb/hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld b/circuitpython/lib/tinyusb/hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld
new file mode 100644
index 0000000..660f301
--- /dev/null
+++ b/circuitpython/lib/tinyusb/hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld
@@ -0,0 +1,171 @@
+/**
+*****************************************************************************
+**
+**  File        : stm32wb55xx_flash_cm4.ld
+**
+**  Abstract    : System Workbench Minimal System calls file
+**
+** 		          For more information about which c-functions
+**                need which of these lowlevel functions
+**                please consult the Newlib libc-manual
+**
+**  Environment : System Workbench for MCU
+**
+**  Distribution: The file is distributed “as is,” without any warranty
+**                of any kind.
+**
+*****************************************************************************
+** @attention
+**
+** Copyright (c) 2019 STMicroelectronics.
+** All rights reserved.
+**
+** This software is licensed under terms that can be found in the LICENSE file
+** in the root directory of this software component.
+** If no LICENSE file comes with this software, it is provided AS-IS.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20030000;    /* end of RAM */
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x400;      /* required amount of heap  */
+_Min_Stack_Size = 0x1000;   /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx)                 : ORIGIN = 0x08000000, LENGTH = 512K
+RAM1 (xrw)                 : ORIGIN = 0x20000008, LENGTH = 0x2FFF8
+RAM_SHARED (xrw)           : ORIGIN = 0x20030000, LENGTH = 10K
+}
+
+/* Define output sections */
+SECTIONS
+{
+  /* The startup code goes first into FLASH */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >FLASH
+
+  /* The program code and other data goes into FLASH */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data goes into FLASH */
+  .rodata :
+  {
+    . = ALIGN(4);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+  .ARM : {
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+  } >FLASH
+
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >FLASH
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >FLASH
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >FLASH
+
+  /* used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections goes into RAM, load LMA copy after code */
+  .data : 
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+  } >RAM1 AT> FLASH
+
+  
+  /* Uninitialized data section */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss section */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM1
+
+  /* User_heap_stack section, used to check that there is enough RAM left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(8);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(8);
+  } >RAM1
+
+  
+
+  /* Remove information from the standard libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0       : { *(.ARM.attributes) }
+   MAPPING_TABLE (NOLOAD) : { *(MAPPING_TABLE) } >RAM_SHARED
+   MB_MEM1 (NOLOAD)       : { *(MB_MEM1) } >RAM_SHARED
+   MB_MEM2 (NOLOAD)       : { _sMB_MEM2 = . ; *(MB_MEM2) ; _eMB_MEM2 = . ; } >RAM_SHARED
+}
+
+