add circuitpython code

5 files changed, 260 insertions, 0 deletions

diff --git a/circuitpython/lib/tinyusb/examples/host/bare_api/CMakeLists.txt b/circuitpython/lib/tinyusb/examples/host/bare_api/CMakeLists.txt
new file mode 100644
index 0000000..bff281a
--- /dev/null
+++ b/circuitpython/lib/tinyusb/examples/host/bare_api/CMakeLists.txt
@@ -0,0 +1,27 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+        )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src
+        )
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_host_example(${PROJECT})
\ No newline at end of file
diff --git a/circuitpython/lib/tinyusb/examples/host/bare_api/Makefile b/circuitpython/lib/tinyusb/examples/host/bare_api/Makefile
new file mode 100644
index 0000000..c59369f
--- /dev/null
+++ b/circuitpython/lib/tinyusb/examples/host/bare_api/Makefile
@@ -0,0 +1,28 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+	src \
+	$(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += \
+	src/main.c
+
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+# TODO: suppress warning caused by host stack
+CFLAGS += -Wno-error=cast-align -Wno-error=null-dereference
+
+# TinyUSB Host Stack source
+SRC_C += \
+	src/class/cdc/cdc_host.c \
+	src/class/hid/hid_host.c \
+	src/class/msc/msc_host.c \
+	src/host/hub.c \
+	src/host/usbh.c \
+	src/host/usbh_control.c \
+	src/portable/ohci/ohci.c \
+	src/portable/nxp/lpc17_40/hcd_lpc17_40.c
+
+include ../../rules.mk
diff --git a/circuitpython/lib/tinyusb/examples/host/bare_api/only.txt b/circuitpython/lib/tinyusb/examples/host/bare_api/only.txt
new file mode 100644
index 0000000..7fe4e3f
--- /dev/null
+++ b/circuitpython/lib/tinyusb/examples/host/bare_api/only.txt
@@ -0,0 +1,9 @@
+mcu:LPC175X_6X
+mcu:LPC177X_8X
+mcu:LPC18XX
+mcu:LPC40XX
+mcu:LPC43XX
+mcu:MIMXRT10XX
+mcu:RP2040
+mcu:MSP432E4
+mcu:RX65X
diff --git a/circuitpython/lib/tinyusb/examples/host/bare_api/src/main.c b/circuitpython/lib/tinyusb/examples/host/bare_api/src/main.c
new file mode 100644
index 0000000..b6b1527
--- /dev/null
+++ b/circuitpython/lib/tinyusb/examples/host/bare_api/src/main.c
@@ -0,0 +1,102 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+/* This example current worked and tested with following controller
+ * - Sony DualShock 4 [CUH-ZCT2x] VID = 0x054c, PID = 0x09cc
+ */
+
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+void led_blinking_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  printf("TinyUSB Host HID Controller Example\r\n");
+  printf("Note: Events only displayed for explictly supported controllers\r\n");
+
+  tusb_init();
+
+  while (1)
+  {
+    // tinyusb host task
+    tuh_task();
+    led_blinking_task();
+  }
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// TinyUSB Callbacks
+//--------------------------------------------------------------------+
+
+void print_device_descriptor(uint8_t dev_addr)
+{
+  (void) dev_addr;
+  printf("Device Descriptor:\r\n");
+}
+
+// Invoked when device is mounted (configured)
+void tuh_mount_cb (uint8_t dev_addr)
+{
+  printf("Device attached, address = %d\r\n", dev_addr);
+  print_device_descriptor(dev_addr);
+}
+
+/// Invoked when device is unmounted (bus reset/unplugged)
+void tuh_umount_cb(uint8_t dev_addr)
+{
+  printf("Device removed, address = %d\r\n", dev_addr);
+}
+
+//--------------------------------------------------------------------+
+// Blinking Task
+//--------------------------------------------------------------------+
+void led_blinking_task(void)
+{
+  const uint32_t interval_ms = 1000;
+  static uint32_t start_ms = 0;
+
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < interval_ms) return; // not enough time
+  start_ms += interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}
diff --git a/circuitpython/lib/tinyusb/examples/host/bare_api/src/tusb_config.h b/circuitpython/lib/tinyusb/examples/host/bare_api/src/tusb_config.h
new file mode 100644
index 0000000..234eca4
--- /dev/null
+++ b/circuitpython/lib/tinyusb/examples/host/bare_api/src/tusb_config.h
@@ -0,0 +1,94 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+  #error CFG_TUSB_MCU must be defined
+#endif
+
+#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+  #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_HOST | OPT_MODE_HIGH_SPEED)
+#else
+  #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_HOST
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS                 OPT_OS_NONE
+#endif
+
+// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
+// #define CFG_TUSB_DEBUG           0
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// CONFIGURATION
+//--------------------------------------------------------------------
+
+// Size of buffer to hold descriptors and other data used for enumeration
+#define CFG_TUH_ENUMERATION_BUFSIZE 256
+
+// only hub class is enabled
+#define CFG_TUH_HUB                 1
+
+// max device support (excluding hub device)
+// 1 hub typically has 4 ports
+#define CFG_TUH_DEVICE_MAX          (CFG_TUH_HUB ? 4 : 1)
+
+#define CFG_TUH_ENDPOINT_MAX       8
+
+//------------- HID -------------//
+
+#define CFG_TUH_HID_EP_BUFSIZE      64
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */