init: repository

18 files changed, 428 insertions, 0 deletions

diff --git a/config/application.rb b/config/application.rb
new file mode 100644
index 0000000..14ebc4e
--- /dev/null
+++ b/config/application.rb
@@ -0,0 +1,42 @@
+require_relative "boot"
+
+require "rails"
+# Pick the frameworks you want:
+require "active_model/railtie"
+# require "active_job/railtie"
+require "active_record/railtie"
+# require "active_storage/engine"
+require "action_controller/railtie"
+# require "action_mailer/railtie"
+# require "action_mailbox/engine"
+# require "action_text/engine"
+require "action_view/railtie"
+# require "action_cable/engine"
+# require "rails/test_unit/railtie"
+
+# Require the gems listed in Gemfile, including any gems
+# you've limited to :test, :development, or :production.
+Bundler.require(*Rails.groups)
+
+module Monzieur
+  class Application < Rails::Application
+    # Initialize configuration defaults for originally generated Rails version.
+    config.load_defaults 8.1
+
+    # Please, add to the `ignore` list any other `lib` subdirectories that do
+    # not contain `.rb` files, or that should not be reloaded or eager loaded.
+    # Common ones are `templates`, `generators`, or `middleware`, for example.
+    config.autoload_lib(ignore: %w[assets tasks])
+
+    # Configuration for the application, engines, and railties goes here.
+    #
+    # These settings can be overridden in specific environments using the files
+    # in config/environments, which are processed later.
+    #
+    # config.time_zone = "Central Time (US & Canada)"
+    # config.eager_load_paths << Rails.root.join("extras")
+
+    # Don't generate system test files.
+    config.generators.system_tests = nil
+  end
+end
diff --git a/config/boot.rb b/config/boot.rb
new file mode 100644
index 0000000..988a5dd
--- /dev/null
+++ b/config/boot.rb
@@ -0,0 +1,4 @@
+ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../Gemfile", __dir__)
+
+require "bundler/setup" # Set up gems listed in the Gemfile.
+require "bootsnap/setup" # Speed up boot time by caching expensive operations.
diff --git a/config/bundler-audit.yml b/config/bundler-audit.yml
new file mode 100644
index 0000000..e74b3af
--- /dev/null
+++ b/config/bundler-audit.yml
@@ -0,0 +1,5 @@
+# Audit all gems listed in the Gemfile for known security problems by running bin/bundler-audit.
+# CVEs that are not relevant to the application can be enumerated on the ignore list below.
+
+ignore:
+  - CVE-THAT-DOES-NOT-APPLY
diff --git a/config/ci.rb b/config/ci.rb
new file mode 100644
index 0000000..8e21e90
--- /dev/null
+++ b/config/ci.rb
@@ -0,0 +1,19 @@
+# Run using bin/ci
+
+CI.run do
+  step "Setup", "bin/setup --skip-server"
+
+  step "Style: Ruby", "bin/rubocop"
+
+  step "Security: Gem audit", "bin/bundler-audit"
+  step "Security: Importmap vulnerability audit", "bin/importmap audit"
+  step "Security: Brakeman code analysis", "bin/brakeman --quiet --no-pager --exit-on-warn --exit-on-error"
+
+  # Optional: set a green GitHub commit status to unblock PR merge.
+  # Requires the `gh` CLI and `gh extension install basecamp/gh-signoff`.
+  # if success?
+  #   step "Signoff: All systems go. Ready for merge and deploy.", "gh signoff"
+  # else
+  #   failure "Signoff: CI failed. Do not merge or deploy.", "Fix the issues and try again."
+  # end
+end
diff --git a/config/credentials.yml.enc b/config/credentials.yml.enc
new file mode 100644
index 0000000..640ff36
--- /dev/null
+++ b/config/credentials.yml.enc
@@ -0,0 +1 @@
+AHkRKrM8ghhV8GPVPnlVCI0FybgH58GNiSEcUoHXWTa79QCQ1JnflMmlelOrMOZFNRXnJ4IEh7Q5mISWTMnIs4tnsC3o7Wr2y4qd/jW4nfIqsoUerijnDvwLdnQWvFpxQmKa9PobAlgvBuG170K219UwzcHerNvnJ6ewqZAIix/okqhEehh0GT+E5Yi6RPxqpm6IuE370tIbRzZPbDCbdidhOnJIVH79AcZclPVbhyP0P5ZBo0oZhIqoEQdy5SKaOjygdzAvToUDwGmgXShzJj+736DpsLlfcGDHJ68SwYd+82jMD0qUcd8hqSQXDwF3IWDUOj+XqhodBDh0ncv4FT5jedLTH6SyHLtfgRTPiZHLACvrvCjdDq2K0eB0crdQtJg6Q61g6kdnzCSnD05Qg13TG6O7UO66HmGjTREf0Su94K3f6Xqr8qHSCQkX2HtlzWjl17V4V7WW71JgkVclMgDK0l6BT77OmKxjzZZUVzPqhM9+kBnLfxvj--6TcIzEEuaUGNsM8q--fe90KBf1fb4ehZ7gfm7FLQ==
\ No newline at end of file
diff --git a/config/database.yml b/config/database.yml
new file mode 100644
index 0000000..8079641
--- /dev/null
+++ b/config/database.yml
@@ -0,0 +1,32 @@
+# SQLite. Versions 3.8.0 and up are supported.
+#   gem install sqlite3
+#
+#   Ensure the SQLite 3 gem is defined in your Gemfile
+#   gem "sqlite3"
+#
+default: &default
+  adapter: sqlite3
+  max_connections: <%= ENV.fetch("RAILS_MAX_THREADS") { 5 } %>
+  timeout: 5000
+
+development:
+  <<: *default
+  database: storage/development.sqlite3
+
+# Warning: The database defined as "test" will be erased and
+# re-generated from your development database when you run "rake".
+# Do not set this db to the same as development or production.
+test:
+  <<: *default
+  database: storage/test.sqlite3
+
+
+# SQLite3 write its data on the local filesystem, as such it requires
+# persistent disks. If you are deploying to a managed service, you should
+# make sure it provides disk persistence, as many don't.
+#
+# Similarly, if you deploy your application as a Docker container, you must
+# ensure the database is located in a persisted volume.
+production:
+  <<: *default
+  # database: path/to/persistent/storage/production.sqlite3
diff --git a/config/environment.rb b/config/environment.rb
new file mode 100644
index 0000000..cac5315
--- /dev/null
+++ b/config/environment.rb
@@ -0,0 +1,5 @@
+# Load the Rails application.
+require_relative "application"
+
+# Initialize the Rails application.
+Rails.application.initialize!
diff --git a/config/environments/development.rb b/config/environments/development.rb
new file mode 100644
index 0000000..dd28453
--- /dev/null
+++ b/config/environments/development.rb
@@ -0,0 +1,60 @@
+require "active_support/core_ext/integer/time"
+
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Make code changes take effect immediately without server restart.
+  config.enable_reloading = true
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports.
+  config.consider_all_requests_local = true
+
+  # Enable server timing.
+  config.server_timing = true
+
+  # Enable/disable Action Controller caching. By default Action Controller caching is disabled.
+  # Run rails dev:cache to toggle Action Controller caching.
+  if Rails.root.join("tmp/caching-dev.txt").exist?
+    config.action_controller.perform_caching = true
+    config.action_controller.enable_fragment_cache_logging = true
+    config.public_file_server.headers = { "cache-control" => "public, max-age=#{2.days.to_i}" }
+  else
+    config.action_controller.perform_caching = false
+  end
+
+  # Change to :null_store to avoid any caching.
+  config.cache_store = :memory_store
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations.
+  config.active_record.migration_error = :page_load
+
+  # Highlight code that triggered database queries in logs.
+  config.active_record.verbose_query_logs = true
+
+  # Append comments with runtime information tags to SQL queries in logs.
+  config.active_record.query_log_tags_enabled = true
+
+  # Highlight code that triggered redirect in logs.
+  config.action_dispatch.verbose_redirect_logs = true
+
+  # Suppress logger output for asset requests.
+  config.assets.quiet = true
+
+  # Raises error for missing translations.
+  # config.i18n.raise_on_missing_translations = true
+
+  # Annotate rendered view with file names.
+  config.action_view.annotate_rendered_view_with_filenames = true
+
+  # Raise error when a before_action's only/except options reference missing actions.
+  config.action_controller.raise_on_missing_callback_actions = true
+
+  # Apply autocorrection by RuboCop to files generated by `bin/rails generate`.
+  # config.generators.apply_rubocop_autocorrect_after_generate!
+end
diff --git a/config/environments/production.rb b/config/environments/production.rb
new file mode 100644
index 0000000..7b0b12b
--- /dev/null
+++ b/config/environments/production.rb
@@ -0,0 +1,67 @@
+require "active_support/core_ext/integer/time"
+
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.enable_reloading = false
+
+  # Eager load code on boot for better performance and memory savings (ignored by Rake tasks).
+  config.eager_load = true
+
+  # Full error reports are disabled.
+  config.consider_all_requests_local = false
+
+  # Turn on fragment caching in view templates.
+  config.action_controller.perform_caching = true
+
+  # Cache assets for far-future expiry since they are all digest stamped.
+  config.public_file_server.headers = { "cache-control" => "public, max-age=#{1.year.to_i}" }
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.asset_host = "http://assets.example.com"
+
+  # Assume all access to the app is happening through a SSL-terminating reverse proxy.
+  config.assume_ssl = true
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  config.force_ssl = true
+
+  # Skip http-to-https redirect for the default health check endpoint.
+  # config.ssl_options = { redirect: { exclude: ->(request) { request.path == "/up" } } }
+
+  # Log to STDOUT with the current request id as a default log tag.
+  config.log_tags = [ :request_id ]
+  config.logger   = ActiveSupport::TaggedLogging.logger(STDOUT)
+
+  # Change to "debug" to log everything (including potentially personally-identifiable information!).
+  config.log_level = ENV.fetch("RAILS_LOG_LEVEL", "info")
+
+  # Prevent health checks from clogging up the logs.
+  config.silence_healthcheck_path = "/up"
+
+  # Don't log any deprecations.
+  config.active_support.report_deprecations = false
+
+  # Replace the default in-process memory cache store with a durable alternative.
+  # config.cache_store = :mem_cache_store
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+
+  # Only use :id for inspections in production.
+  config.active_record.attributes_for_inspect = [ :id ]
+
+  # Enable DNS rebinding protection and other `Host` header attacks.
+  # config.hosts = [
+  #   "example.com",     # Allow requests from example.com
+  #   /.*\.example\.com/ # Allow requests from subdomains like `www.example.com`
+  # ]
+  #
+  # Skip DNS rebinding protection for the default health check endpoint.
+  # config.host_authorization = { exclude: ->(request) { request.path == "/up" } }
+end
diff --git a/config/environments/test.rb b/config/environments/test.rb
new file mode 100644
index 0000000..14bc29e
--- /dev/null
+++ b/config/environments/test.rb
@@ -0,0 +1,42 @@
+# The test environment is used exclusively to run your application's
+# test suite. You never need to work with it otherwise. Remember that
+# your test database is "scratch space" for the test suite and is wiped
+# and recreated between test runs. Don't rely on the data there!
+
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # While tests run files are not watched, reloading is not necessary.
+  config.enable_reloading = false
+
+  # Eager loading loads your entire application. When running a single test locally,
+  # this is usually not necessary, and can slow down your test suite. However, it's
+  # recommended that you enable it in continuous integration systems to ensure eager
+  # loading is working properly before deploying your code.
+  config.eager_load = ENV["CI"].present?
+
+  # Configure public file server for tests with cache-control for performance.
+  config.public_file_server.headers = { "cache-control" => "public, max-age=3600" }
+
+  # Show full error reports.
+  config.consider_all_requests_local = true
+  config.cache_store = :null_store
+
+  # Render exception templates for rescuable exceptions and raise for other exceptions.
+  config.action_dispatch.show_exceptions = :rescuable
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations.
+  # config.i18n.raise_on_missing_translations = true
+
+  # Annotate rendered view with file names.
+  # config.action_view.annotate_rendered_view_with_filenames = true
+
+  # Raise error when a before_action's only/except options reference missing actions.
+  config.action_controller.raise_on_missing_callback_actions = true
+end
diff --git a/config/importmap.rb b/config/importmap.rb
new file mode 100644
index 0000000..909dfc5
--- /dev/null
+++ b/config/importmap.rb
@@ -0,0 +1,7 @@
+# Pin npm packages by running ./bin/importmap
+
+pin "application"
+pin "@hotwired/turbo-rails", to: "turbo.min.js"
+pin "@hotwired/stimulus", to: "stimulus.min.js"
+pin "@hotwired/stimulus-loading", to: "stimulus-loading.js"
+pin_all_from "app/javascript/controllers", under: "controllers"
diff --git a/config/initializers/assets.rb b/config/initializers/assets.rb
new file mode 100644
index 0000000..4873244
--- /dev/null
+++ b/config/initializers/assets.rb
@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = "1.0"
+
+# Add additional assets to the asset load path.
+# Rails.application.config.assets.paths << Emoji.images_path
diff --git a/config/initializers/content_security_policy.rb b/config/initializers/content_security_policy.rb
new file mode 100644
index 0000000..d51d713
--- /dev/null
+++ b/config/initializers/content_security_policy.rb
@@ -0,0 +1,29 @@
+# Be sure to restart your server when you modify this file.
+
+# Define an application-wide content security policy.
+# See the Securing Rails Applications Guide for more information:
+# https://guides.rubyonrails.org/security.html#content-security-policy-header
+
+# Rails.application.configure do
+#   config.content_security_policy do |policy|
+#     policy.default_src :self, :https
+#     policy.font_src    :self, :https, :data
+#     policy.img_src     :self, :https, :data
+#     policy.object_src  :none
+#     policy.script_src  :self, :https
+#     policy.style_src   :self, :https
+#     # Specify URI for violation reports
+#     # policy.report_uri "/csp-violation-report-endpoint"
+#   end
+#
+#   # Generate session nonces for permitted importmap, inline scripts, and inline styles.
+#   config.content_security_policy_nonce_generator = ->(request) { request.session.id.to_s }
+#   config.content_security_policy_nonce_directives = %w(script-src style-src)
+#
+#   # Automatically add `nonce` to `javascript_tag`, `javascript_include_tag`, and `stylesheet_link_tag`
+#   # if the corresponding directives are specified in `content_security_policy_nonce_directives`.
+#   # config.content_security_policy_nonce_auto = true
+#
+#   # Report violations without enforcing the policy.
+#   # config.content_security_policy_report_only = true
+# end
diff --git a/config/initializers/filter_parameter_logging.rb b/config/initializers/filter_parameter_logging.rb
new file mode 100644
index 0000000..c0b717f
--- /dev/null
+++ b/config/initializers/filter_parameter_logging.rb
@@ -0,0 +1,8 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure parameters to be partially matched (e.g. passw matches password) and filtered from the log file.
+# Use this to limit dissemination of sensitive information.
+# See the ActiveSupport::ParameterFilter documentation for supported notations and behaviors.
+Rails.application.config.filter_parameters += [
+  :passw, :email, :secret, :token, :_key, :crypt, :salt, :certificate, :otp, :ssn, :cvv, :cvc
+]
diff --git a/config/initializers/inflections.rb b/config/initializers/inflections.rb
new file mode 100644
index 0000000..3860f65
--- /dev/null
+++ b/config/initializers/inflections.rb
@@ -0,0 +1,16 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.plural /^(ox)$/i, "\\1en"
+#   inflect.singular /^(ox)en/i, "\\1"
+#   inflect.irregular "person", "people"
+#   inflect.uncountable %w( fish sheep )
+# end
+
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.acronym "RESTful"
+# end
diff --git a/config/locales/en.yml b/config/locales/en.yml
new file mode 100644
index 0000000..6c349ae
--- /dev/null
+++ b/config/locales/en.yml
@@ -0,0 +1,31 @@
+# Files in the config/locales directory are used for internationalization and
+# are automatically loaded by Rails. If you want to use locales other than
+# English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t "hello"
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t("hello") %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# To learn more about the API, please read the Rails Internationalization guide
+# at https://guides.rubyonrails.org/i18n.html.
+#
+# Be aware that YAML interprets the following case-insensitive strings as
+# booleans: `true`, `false`, `on`, `off`, `yes`, `no`. Therefore, these strings
+# must be quoted to be interpreted as strings. For example:
+#
+#     en:
+#       "yes": yup
+#       enabled: "ON"
+
+en:
+  hello: "Hello world"
diff --git a/config/puma.rb b/config/puma.rb
new file mode 100644
index 0000000..1c317b4
--- /dev/null
+++ b/config/puma.rb
@@ -0,0 +1,39 @@
+# This configuration file will be evaluated by Puma. The top-level methods that
+# are invoked here are part of Puma's configuration DSL. For more information
+# about methods provided by the DSL, see https://puma.io/puma/Puma/DSL.html.
+#
+# Puma starts a configurable number of processes (workers) and each process
+# serves each request in a thread from an internal thread pool.
+#
+# You can control the number of workers using ENV["WEB_CONCURRENCY"]. You
+# should only set this value when you want to run 2 or more workers. The
+# default is already 1. You can set it to `auto` to automatically start a worker
+# for each available processor.
+#
+# The ideal number of threads per worker depends both on how much time the
+# application spends waiting for IO operations and on how much you wish to
+# prioritize throughput over latency.
+#
+# As a rule of thumb, increasing the number of threads will increase how much
+# traffic a given process can handle (throughput), but due to CRuby's
+# Global VM Lock (GVL) it has diminishing returns and will degrade the
+# response time (latency) of the application.
+#
+# The default is set to 3 threads as it's deemed a decent compromise between
+# throughput and latency for the average Rails application.
+#
+# Any libraries that use a connection pool or another resource pool should
+# be configured to provide at least as many connections as the number of
+# threads. This includes Active Record's `pool` parameter in `database.yml`.
+threads_count = ENV.fetch("RAILS_MAX_THREADS", 3)
+threads threads_count, threads_count
+
+# Specifies the `port` that Puma will listen on to receive requests; default is 3000.
+port ENV.fetch("PORT", 3000)
+
+# Allow puma to be restarted by `bin/rails restart` command.
+plugin :tmp_restart
+
+# Specify the PID file. Defaults to tmp/pids/server.pid in development.
+# In other environments, only set the PID file if requested.
+pidfile ENV["PIDFILE"] if ENV["PIDFILE"]
diff --git a/config/routes.rb b/config/routes.rb
new file mode 100644
index 0000000..48254e8
--- /dev/null
+++ b/config/routes.rb
@@ -0,0 +1,14 @@
+Rails.application.routes.draw do
+  # Define your application routes per the DSL in https://guides.rubyonrails.org/routing.html
+
+  # Reveal health status on /up that returns 200 if the app boots with no exceptions, otherwise 500.
+  # Can be used by load balancers and uptime monitors to verify that the app is live.
+  get "up" => "rails/health#show", as: :rails_health_check
+
+  # Render dynamic PWA files from app/views/pwa/* (remember to link manifest in application.html.erb)
+  # get "manifest" => "rails/pwa#manifest", as: :pwa_manifest
+  # get "service-worker" => "rails/pwa#service_worker", as: :pwa_service_worker
+
+  # Defines the root path route ("/")
+  # root "posts#index"
+end