| Commit message (Collapse) | Author | Age |
|---|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
lineage-18.1-caf-msm8998
* common/android-4.4-p:
Linux 4.4.293
usb: max-3421: Use driver data instead of maintaining a list of bound devices
ASoC: DAPM: Cover regression by kctl change notification fix
batman-adv: Avoid WARN_ON timing related checks
batman-adv: Don't always reallocate the fragmentation skb head
batman-adv: Reserve needed_*room for fragments
batman-adv: Consider fragmentation for needed_headroom
batman-adv: set .owner to THIS_MODULE
batman-adv: mcast: fix duplicate mcast packets from BLA backbone to mesh
batman-adv: mcast: fix duplicate mcast packets in BLA backbone from mesh
batman-adv: mcast: fix duplicate mcast packets in BLA backbone from LAN
batman-adv: Prevent duplicated softif_vlan entry
batman-adv: Fix multicast TT issues with bogus ROAM flags
batman-adv: Keep fragments equally sized
drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors
drm/udl: fix control-message timeout
cfg80211: call cfg80211_stop_ap when switch from P2P_GO type
parisc/sticon: fix reverse colors
btrfs: fix memory ordering between normal and ordered work functions
mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
hexagon: export raw I/O routines for modules
tun: fix bonding active backup with arp monitoring
NFC: reorder the logic in nfc_{un,}register_device
NFC: reorganize the functions in nci_request
platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'
mips: bcm63xx: add support for clk_get_parent()
net: bnx2x: fix variable dereferenced before check
sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set
sh: define __BIG_ENDIAN for math-emu
sh: fix kconfig unmet dependency warning for FRAME_POINTER
maple: fix wrong return value of maple_bus_init().
sh: check return code of request_irq
powerpc/dcr: Use cmplwi instead of 3-argument cmpli
ALSA: gus: fix null pointer dereference on pointer block
powerpc/5200: dts: fix memory node unit name
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
MIPS: sni: Fix the build
tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc
usb: host: ohci-tmio: check return value after calling platform_get_resource()
ARM: dts: omap: fix gpmc,mux-add-data type
scsi: advansys: Fix kernel pointer leak
usb: musb: tusb6010: check return value after calling platform_get_resource()
scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()
net: batman-adv: fix error handling
PCI/MSI: Destroy sysfs before freeing entries
parisc/entry: fix trace test in syscall exit path
PCI: Add PCI_EXP_DEVCTL_PAYLOAD_* macros
mm, oom: pagefault_out_of_memory: don't force global OOM for dying tasks
ARM: 9156/1: drop cc-option fallbacks for architecture selection
USB: chipidea: fix interrupt deadlock
vsock: prevent unnecessary refcnt inc for nonblocking connect
nfc: pn533: Fix double free when pn533_fill_fragment_skbs() fails
llc: fix out-of-bound array index in llc_sk_dev_hash()
bonding: Fix a use-after-free problem when bond_sysfs_slave_add() failed
net: davinci_emac: Fix interrupt pacing disable
xen-pciback: Fix return in pm_ctrl_init()
scsi: qla2xxx: Turn off target reset during issue_lip
watchdog: f71808e_wdt: fix inaccurate report in WDIOC_GETTIMEOUT
m68k: set a default value for MEMORY_RESERVE
netfilter: nfnetlink_queue: fix OOB when mac header was cleared
dmaengine: at_xdmac: fix AT_XDMAC_CC_PERID() macro
RDMA/mlx4: Return missed an error if device doesn't support steering
scsi: csiostor: Uninitialized data in csio_ln_vnp_read_cbfn()
power: supply: rt5033_battery: Change voltage values to µV
usb: gadget: hid: fix error code in do_config()
serial: 8250_dw: Drop wrong use of ACPI_PTR()
video: fbdev: chipsfb: use memset_io() instead of memset()
memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probe
JFS: fix memleak in jfs_mount
scsi: dc395: Fix error case unwinding
ARM: s3c: irq-s3c24xx: Fix return value check for s3c24xx_init_intc()
crypto: pcrypt - Delay write to padata->info
libertas: Fix possible memory leak in probe and disconnect
libertas_tf: Fix possible memory leak in probe and disconnect
smackfs: use netlbl_cfg_cipsov4_del() for deleting cipso_v4_doi
mwifiex: Send DELBA requests according to spec
platform/x86: thinkpad_acpi: Fix bitwise vs. logical warning
net: stream: don't purge sk_error_queue in sk_stream_kill_queues()
drm/msm: uninitialized variable in msm_gem_import()
memstick: jmb38x_ms: use appropriate free function in jmb38x_ms_alloc_host()
memstick: avoid out-of-range warning
b43: fix a lower bounds test
b43legacy: fix a lower bounds test
crypto: qat - detect PFVF collision after ACK
ath9k: Fix potential interrupt storm on queue reset
cpuidle: Fix kobject memory leaks in error paths
media: si470x: Avoid card name truncation
media: dvb-usb: fix ununit-value in az6027_rc_query
parisc/kgdb: add kgdb_roundup() to make kgdb work with idle polling
parisc: fix warning in flush_tlb_all
ARM: 9136/1: ARMv7-M uses BE-8, not BE-32
ARM: clang: Do not rely on lr register for stacktrace
smackfs: use __GFP_NOFAIL for smk_cipso_doi()
iwlwifi: mvm: disable RX-diversity in powersave
PM: hibernate: Get block device exclusively in swsusp_check()
mwl8k: Fix use-after-free in mwl8k_fw_state_machine()
lib/xz: Validate the value before assigning it to an enum variable
lib/xz: Avoid overlapping memcpy() with invalid input with in-place decompression
memstick: r592: Fix a UAF bug when removing the driver
ACPI: battery: Accept charges over the design capacity as full
ath: dfs_pattern_detector: Fix possible null-pointer dereference in channel_detector_create()
tracefs: Have tracefs directories not set OTH permission bits by default
media: usb: dvd-usb: fix uninit-value bug in dibusb_read_eeprom_byte()
ACPICA: Avoid evaluating methods too early during system resume
ia64: don't do IA64_CMPXCHG_DEBUG without CONFIG_PRINTK
media: mceusb: return without resubmitting URB in case of -EPROTO error.
media: s5p-mfc: fix possible null-pointer dereference in s5p_mfc_probe()
media: uvcvideo: Set capability in s_param
media: netup_unidvb: handle interrupt properly according to the firmware
media: mt9p031: Fix corrupted frame after restarting stream
x86: Increase exception stack sizes
smackfs: Fix use-after-free in netlbl_catmap_walk()
MIPS: lantiq: dma: reset correct number of channel
MIPS: lantiq: dma: add small delay after reset
platform/x86: wmi: do not fail if disabling fails
Bluetooth: fix use-after-free error in lock_sock_nested()
Bluetooth: sco: Fix lock_sock() blockage by memcpy_from_msg()
USB: iowarrior: fix control-message timeouts
USB: serial: keyspan: fix memleak on probe errors
iio: dac: ad5446: Fix ad5622_write() return value
quota: correct error number in free_dqentry()
quota: check block number when reading the block in quota file
ALSA: mixer: fix deadlock in snd_mixer_oss_set_volume
ALSA: mixer: oss: Fix racy access to slots
power: supply: max17042_battery: use VFSOC for capacity when no rsns
power: supply: max17042_battery: Prevent int underflow in set_soc_threshold
signal: Remove the bogus sigkill_pending in ptrace_stop
mwifiex: Read a PCI register after writing the TX ring write pointer
wcn36xx: Fix HT40 capability for 2Ghz band
PCI: Mark Atheros QCA6174 to avoid bus reset
ath6kl: fix control-message timeout
ath6kl: fix division by zero in send path
mwifiex: fix division by zero in fw download path
EDAC/sb_edac: Fix top-of-high-memory value for Broadwell/Haswell
hwmon: (pmbus/lm25066) Add offset coefficients
btrfs: fix lost error handling when replaying directory deletes
vmxnet3: do not stop tx queues after netif_device_detach()
spi: spl022: fix Microwire full duplex mode
xen/netfront: stop tx queues during live migration
mmc: winbond: don't build on M68K
hyperv/vmbus: include linux/bitops.h
x86/irq: Ensure PI wakeup handler is unregistered before module unload
ALSA: timer: Unconditionally unlink slave instances, too
ALSA: timer: Fix use-after-free problem
ALSA: synth: missing check for possible NULL after the call to kstrdup
ALSA: line6: fix control and interrupt message timeouts
ALSA: 6fire: fix control and bulk message timeouts
ALSA: ua101: fix division by zero at probe
media: ite-cir: IR receiver stop working after receive overflow
parisc: Fix ptrace check on syscall return
mmc: dw_mmc: Dont wait for DRTO on Write RSP error
ocfs2: fix data corruption on truncate
libata: fix read log timeout value
Input: i8042 - Add quirk for Fujitsu Lifebook T725
Input: elantench - fix misreporting trackpoint coordinates
xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delay
binder: use cred instead of task for selinux checks
binder: use euid from cred instead of using task
FROMGIT: binder: fix test regression due to sender_euid change
BACKPORT: binder: use cred instead of task for selinux checks
BACKPORT: binder: use euid from cred instead of using task
BACKPORT: ip_gre: add validation for csum_start
Linux 4.4.292
rsi: fix control-message timeout
staging: rtl8192u: fix control-message timeouts
staging: r8712u: fix control-message timeout
comedi: vmk80xx: fix bulk and interrupt message timeouts
comedi: vmk80xx: fix bulk-buffer overflow
comedi: vmk80xx: fix transfer-buffer overflows
staging: comedi: drivers: replace le16_to_cpu() with usb_endpoint_maxp()
comedi: ni_usb6501: fix NULL-deref in command paths
comedi: dt9812: fix DMA buffers on stack
isofs: Fix out of bound access for corrupted isofs image
usb: hso: fix error handling code of hso_create_net_device
printk/console: Allow to disable console output by using console="" or console=null
usb-storage: Add compatibility quirk flags for iODD 2531/2541
usb: gadget: Mark USB_FSL_QE broken on 64-bit
IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields
IB/qib: Use struct_size() helper
net: hso: register netdev later to avoid a race condition
ARM: 9120/1: Revert "amba: make use of -1 IRQs warn"
scsi: core: Put LLD module refcnt after SCSI device is released
Linux 4.4.291
sctp: add vtag check in sctp_sf_violation
sctp: use init_tag from inithdr for ABORT chunk
nios2: Make NIOS2_DTB_SOURCE_BOOL depend on !COMPILE_TEST
regmap: Fix possible double-free in regcache_rbtree_exit()
net: lan78xx: fix division by zero in send path
mmc: sdhci: Map more voltage level to SDHCI_POWER_330
mmc: dw_mmc: exynos: fix the finding clock sample value
mmc: vub300: fix control-message timeouts
Revert "net: mdiobus: Fix memory leak in __mdiobus_register"
nfc: port100: fix using -ERRNO as command type mask
ata: sata_mv: Fix the error handling of mv_chip_id()
usbnet: fix error return code in usbnet_probe()
usbnet: sanity check for maxpacket
ARM: 8819/1: Remove '-p' from LDFLAGS
ARM: 9139/1: kprobes: fix arch_init_kprobes() prototype
ARM: 9134/1: remove duplicate memcpy() definition
ARM: 9133/1: mm: proc-macros: ensure *_tlb_fns are 4B aligned
Linux 4.4.290
ARM: 9122/1: select HAVE_FUTEX_CMPXCHG
tracing: Have all levels of checks prevent recursion
net: mdiobus: Fix memory leak in __mdiobus_register
ALSA: hda: avoid write to STATESTS if controller is in reset
platform/x86: intel_scu_ipc: Update timeout value in comment
isdn: mISDN: Fix sleeping function called from invalid context
ARM: dts: spear3xx: Fix gmac node
netfilter: Kconfig: use 'default y' instead of 'm' for bool config option
isdn: cpai: check ctr->cnr to avoid array index out of bound
nfc: nci: fix the UAF of rf_conn_info object
ovl: fix missing negative dentry check in ovl_rename()
ASoC: DAPM: Fix missing kctl change notifications
ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset
elfcore: correct reference to CONFIG_UML
ocfs2: mount fails with buffer overflow in strlen
can: peak_pci: peak_pci_remove(): fix UAF
can: peak_usb: pcan_usb_fd_decode_status(): fix back to ERROR_ACTIVE state notification
can: rcar_can: fix suspend/resume
NIOS2: irqflags: rename a redefined register name
netfilter: ipvs: make global sysctl readonly in non-init netns
NFSD: Keep existing listeners on portlist error
r8152: select CRC32 and CRYPTO/CRYPTO_HASH/CRYPTO_SHA256
drm/msm: Fix null pointer dereference on pointer edp
pata_legacy: fix a couple uninitialized variable bugs
NFC: digital: fix possible memory leak in digital_in_send_sdd_req()
NFC: digital: fix possible memory leak in digital_tg_listen_mdaa()
nfc: fix error handling of nfc_proto_register()
ethernet: s2io: fix setting mac address during resume
net: encx24j600: check error in devm_regmap_init_encx24j600
net: korina: select CRC32
net: arc: select CRC32
iio: ssp_sensors: fix error code in ssp_print_mcu_debug()
iio: ssp_sensors: add more range checking in ssp_parse_dataframe()
iio: adc128s052: Fix the error handling path of 'adc128_probe()'
nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells
USB: serial: option: add Telit LE910Cx composition 0x1204
USB: serial: qcserial: add EM9191 QDL support
Input: xpad - add support for another USB ID of Nacon GC-100
efi/cper: use stack buffer for error record decoding
cb710: avoid NULL pointer subtraction
xhci: Enable trust tx length quirk for Fresco FL11 USB controller
s390: fix strrchr() implementation
ALSA: seq: Fix a potential UAF by wrong private_free call order
Conflicts:
drivers/gpu/drm/msm/msm_gem.c
net/bluetooth/l2cap_sock.c
Change-Id: Ia008e8ba419fa5604b5780265564ba80d05fbafa
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
commit e6a0c958bdf9b2e1b57501fc9433a461f0a6aadd upstream.
A kernel built with CONFIG_THUMB2_KERNEL=y and using clang as the
assembler could generate non-naturally-aligned v7wbi_tlb_fns which
results in a boot failure. The original commit adding the macro missed
the .align directive on this data.
Link: https://github.com/ClangBuiltLinux/linux/issues/1447
Link: https://lore.kernel.org/all/0699da7b-354f-aecc-a62f-e25693209af4@linaro.org/
Debugged-by: Ard Biesheuvel <ardb@kernel.org>
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Debugged-by: Richard Henderson <richard.henderson@linaro.org>
Fixes: 66a625a88174 ("ARM: mm: proc-macros: Add generic proc/cache/tlb struct definition macros")
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
https://android.googlesource.com/kernel/common into lineage-17.1-caf-msm8998
This brings LA.UM.8.4.r1-05700-8x98.0 up to date with
https://android.googlesource.com/kernel/common/ android-4.4-p at commit:
8476df741c780 BACKPORT: xtables: extend matches and targets with .usersize
Conflicts:
drivers/usb/gadget/function/f_uac1.c
net/netlink/genetlink.c
sound/core/compress_offload.c
Change-Id: Id7b2fdf3942f1986edec869dcd965df632cc1c5f
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
[ Upstream commit e1de94380af588bdf6ad6f0cc1f75004c35bc096 ]
Recent work with KASan exposed the folling hard-coded bitmask
in arch/arm/mm/proc-macros.S:
bic rd, sp, #8128
bic rd, rd, #63
This forms the bitmask 0x1FFF that is coinciding with
(PAGE_SIZE << THREAD_SIZE_ORDER) - 1, this code was assuming
that THREAD_SIZE is always 8K (8192).
As KASan was increasing THREAD_SIZE_ORDER to 2, I ran into
this bug.
Fix it by this little oneline suggested by Ard:
bic rd, sp, #(THREAD_SIZE - 1) & ~63
Where THREAD_SIZE is defined using THREAD_SIZE_ORDER.
We have to also include <linux/const.h> since the THREAD_SIZE
expands to use the _AC() macro.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| |\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* refs/heads/tmp-903fbe7
Linux 4.4.200
alarmtimer: Change remaining ENOTSUPP to EOPNOTSUPP
ARM: fix the cockup in the previous patch
ARM: ensure that processor vtables is not lost after boot
ARM: spectre-v2: per-CPU vtables to work around big.Little systems
ARM: add PROC_VTABLE and PROC_TABLE macros
ARM: clean up per-processor check_bugs method call
ARM: split out processor lookup
ARM: make lookup_processor_type() non-__init
ARM: 8810/1: vfp: Fix wrong assignement to ufp_exc
ARM: 8796/1: spectre-v1,v1.1: provide helpers for address sanitization
ARM: 8795/1: spectre-v1.1: use put_user() for __put_user()
ARM: 8794/1: uaccess: Prevent speculative use of the current addr_limit
ARM: 8793/1: signal: replace __put_user_error with __put_user
ARM: 8792/1: oabi-compat: copy oabi events using __copy_to_user()
ARM: 8791/1: vfp: use __copy_to_user() when saving VFP state
ARM: 8789/1: signal: copy registers using __copy_to_user()
ARM: spectre-v1: mitigate user accesses
ARM: spectre-v1: use get_user() for __get_user()
ARM: use __inttype() in get_user()
ARM: oabi-compat: copy semops using __copy_from_user()
ARM: vfp: use __copy_from_user() when restoring VFP state
ARM: signal: copy registers using __copy_from_user()
ARM: spectre-v1: fix syscall entry
ARM: spectre-v1: add array_index_mask_nospec() implementation
ARM: spectre-v1: add speculation barrier (csdb) macros
ARM: spectre-v2: warn about incorrect context switching functions
ARM: spectre-v2: add firmware based hardening
ARM: spectre-v2: harden user aborts in kernel space
ARM: spectre-v2: add Cortex A8 and A15 validation of the IBE bit
ARM: spectre-v2: harden branch predictor on context switches
ARM: spectre: add Kconfig symbol for CPUs vulnerable to Spectre
ARM: bugs: add support for per-processor bug checking
ARM: bugs: hook processor bug checking into SMP and suspend paths
ARM: bugs: prepare processor bug infrastructure
ARM: add more CPU part numbers for Cortex and Brahma B15 CPUs
arm/arm64: smccc-1.1: Handle function result as parameters
arm/arm64: smccc-1.1: Make return values unsigned long
arm/arm64: smccc: Add SMCCC-specific return codes
arm/arm64: smccc: Implement SMCCC v1.1 inline primitive
arm/arm64: smccc: Make function identifiers an unsigned quantity
firmware/psci: Expose SMCCC version through psci_ops
firmware/psci: Expose PSCI conduit
arm64: KVM: Report SMCCC_ARCH_WORKAROUND_1 BP hardening support
arm/arm64: KVM: Advertise SMCCC v1.1
ARM: Move system register accessors to asm/cp15.h
ARM: uaccess: remove put_user() code duplication
ARM: 8481/2: drivers: psci: replace psci firmware calls
ARM: 8480/2: arm64: add implementation for arm-smccc
ARM: 8479/2: add implementation for arm-smccc
ARM: 8478/2: arm/arm64: add arm-smccc
ARM: 8051/1: put_user: fix possible data corruption in put_user
dmaengine: qcom: bam_dma: Fix resource leak
net/flow_dissector: switch to siphash
inet: stop leaking jiffies on the wire
net/mlx4_core: Dynamically set guaranteed amount of counters per VF
vxlan: check tun_info options_len properly
net: add READ_ONCE() annotation in __skb_wait_for_more_packets()
net: Zeroing the structure ethtool_wolinfo in ethtool_get_wol()
net: hisilicon: Fix ping latency when deal with high throughput
net: fix sk_page_frag() recursion from memory reclaim
dccp: do not leak jiffies on the wire
cifs: Fix cifsInodeInfo lock_sem deadlock when reconnect occurs
MIPS: bmips: mark exception vectors as char arrays
of: unittest: fix memory leak in unittest_data_add
scsi: target: core: Do not overwrite CDB byte 1
perf kmem: Fix memory leak in compact_gfp_flags()
scsi: fix kconfig dependency warning related to 53C700_LE_ON_BE
scsi: sni_53c710: fix compilation error
ARM: mm: fix alignment handler faults under memory pressure
ARM: dts: logicpd-torpedo-som: Remove twl_keypad
ASoc: rockchip: i2s: Fix RPM imbalance
regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized
regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdone
kbuild: add -fcf-protection=none when using retpoline flags
UPSTREAM: HID: steam: fix deadlock with input devices.
UPSTREAM: HID: steam: fix boot loop with bluetooth firmware
UPSTREAM: HID: steam: remove input device when a hid client is running.
UPSTREAM: HID: steam: use hid_device.driver_data instead of hid_set_drvdata()
UPSTREAM: HID: steam: add missing fields in client initialization
UPSTREAM: HID: steam: add battery device.
UPSTREAM: HID: add driver for Valve Steam Controller
UPSTREAM: HID: sony: Fix memory corruption issue on cleanup.
UPSTREAM: HID: sony: Fix race condition between rumble and device remove.
UPSTREAM: HID: sony: remove redundant check for -ve err
UPSTREAM: HID: sony: Make sure to unregister sensors on failure
UPSTREAM: HID: sony: Make DS4 bt poll interval adjustable
UPSTREAM: HID: sony: Set proper bit flags on DS4 output report
UPSTREAM: HID: sony: DS4 use brighter LED colors
UPSTREAM: HID: sony: Improve navigation controller axis/button mapping
UPSTREAM: HID: sony: Use DS3 MAC address as unique identifier on USB
UPSTREAM: HID: sony: Perform duplicate device check earlier on
UPSTREAM: HID: sony: Expose DS3 motion sensors through separate device
UPSTREAM: HID: sony: Print error on failure to active DS3 / Navigation controllers
UPSTREAM: HID: sony: DS3 comply to Linux gamepad spec
UPSTREAM: HID: sony: Mark DS4 touchpad device as a pointer
UPSTREAM: HID: sony: Support motion sensor calibration on dongle
UPSTREAM: HID: sony: Make work handling more generic
UPSTREAM: HID: sony: Treat the ds4 dongle as a separate device
UPSTREAM: HID: sony: Remove report descriptor fixup for DS4
UPSTREAM: HID: sony: Report hardware timestamp for DS4 sensor values
UPSTREAM: HID: sony: Calibrate DS4 motion sensors
UPSTREAM: HID: sony: Report DS4 motion sensors through a separate device
UPSTREAM: HID: sony: Fix input device leak when connecting a DS4 twice using USB/BT
UPSTREAM: HID: sony: Use LED_CORE_SUSPENDRESUME
UPSTREAM: HID: sony: Ignore DS4 dongle reports when no device is connected
UPSTREAM: HID: sony: Use DS4 MAC address as unique identifier on USB
UPSTREAM: HID: sony: Fix error handling bug when touchpad registration fails
UPSTREAM: HID: sony: Comply to Linux gamepad spec for DS4
UPSTREAM: HID: sony: Make the DS4 touchpad a separate device
UPSTREAM: HID: sony: Fix memory issue when connecting device using both Bluetooth and USB
UPSTREAM: HID: sony: Adjust value range for motion sensors
UPSTREAM: HID: sony: Handle multiple touch events input record
UPSTREAM: HID: sony: Send ds4 output reports on output end-point
UPSTREAM: HID: sony: Perform CRC check on bluetooth input packets
UPSTREAM: HID: sony: Adjust HID report size name definitions
UPSTREAM: HID: sony: Fix race condition in sony_probe
UPSTREAM: HID: sony: Update copyright and add Dualshock 4 rate control note
UPSTREAM: HID: sony: Defer the initial USB Sixaxis output report
UPSTREAM: HID: sony: Relax duplicate checking for USB-only devices
UPSTREAM: HID: sony: underscores are unnecessary for u8, u16, s32
UPSTREAM: HID: sony: fix some warnings from scripts/checkpatch.pl
UPSTREAM: HID: sony: fix errors from scripts/checkpatch.pl
UPSTREAM: HID: sony: fix a typo in descriptors comments s/Joystik/Joystick/
UPSTREAM: HID: sony: Fixup output reports for the nyko core controller
UPSTREAM: HID: sony: Remove the size check for the Dualshock 4 HID Descriptor
UPSTREAM: HID: sony: Save and restore the controller state on suspend and resume
UPSTREAM: HID: sony: Refactor the output report sending functions
After resolving conflicts there is no effective change from this patch
fs/dcache: move security_d_instantiate() behind attaching dentry to inode
Conflicts:
fs/dcache.c
include/linux/arm-smccc.h
include/linux/psci.h
Change-Id: I092fea3b6c69f56639fdb9e511e011cbb326e2c7
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Commit d6951f582cc50ba0ad22ef46b599740966599b14 upstream.
The intention in the previous patch was to only place the processor
tables in the .rodata section if big.Little was being built and we
wanted the branch target hardening, but instead (due to the way it
was tested) it ended up always placing the tables into the .rodata
section.
Although harmless, let's correct this anyway.
Fixes: 3a4d0c2172bc ("ARM: ensure that processor vtables is not lost after boot")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Commit 3a4d0c2172bcf15b7a3d9d498b2b355f9864286b upstream.
Marek Szyprowski reported problems with CPU hotplug in current kernels.
This was tracked down to the processor vtables being located in an
init section, and therefore discarded after kernel boot, despite being
required after boot to properly initialise the non-boot CPUs.
Arrange for these tables to end up in .rodata when required.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 383fb3ee8024 ("ARM: spectre-v2: per-CPU vtables to work around big.Little systems")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Commit 9d3a04925deeabb97c8e26d940b501a2873e8af3 upstream.
Add support for per-processor bug checking - each processor function
descriptor gains a function pointer for this check, which must not be
an __init function. If non-NULL, this will be called whenever a CPU
enters the kernel via which ever path (boot CPU, secondary CPU startup,
CPU resuming, etc.)
This allows processor specific bug checks to validate that workaround
bits are properly enabled by firmware via all entry paths to the kernel.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
| |
This partially reverts 'commit 702b94bff3c505 ("ARM: dma-mapping:
remove dmac_clean_range and dmac_inv_range")'
Some MSM drivers still use the dmac_clean and dmac_inv_range APIs.
Bring back the defines and exports for v7 CPUs.
Change-Id: I69017d73da1065a5eeb9c87c899b6a51be5ebfe6
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
[sramana: resolved minor merge conflicts]
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
|
| |\ \
| | |
| | |
| | |
| | | |
Conflicts:
arch/arm/mm/proc-macros.S
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Both ARM946 and ARM940 setup functions were corrupting r1 and r2,
which is not permissible - these are used to carry the machine ID
and boot data into the kernel, and must be preserved.
The code responsible for this was the same in both files: they were
using the registers to generate a protection region register value.
Fix this by turning this process into a macro, and using that macro
in both these files with an alternative register allocation. r0,
r3 and r7 can be used for temporary values here.
Reported-by: Alex Dumitrache <broscutamaker@gmail.com>
Tested-by: Georg Hofstetter <g3gg0.de@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch replaces the 'branch to setup()' instructions embedded
in the PROCINFO structs with the offset to that setup function
relative to the base of the struct. This preserves the position
independent nature of that field, but uses a data item rather
than an instruction.
This is mainly done to prevent linker failures on large kernels,
where the setup function is out of reach for the branch.
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
We've replaced remap_file_pages(2) implementation with emulation. Nobody
creates non-linear mapping anymore.
This patch also adjust __SWP_TYPE_SHIFT, effectively increase size of
possible swap file to 128G.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ifdef around cpu_\name\()_do_suspend and cpu_\name\()_do_resume
ops in proc-macros.S should check for CONFIG_ARM_CPU_SUSPEND and
not CONFIG_PM_SLEEP. Fix it.
[ Please note that cpu_v7_do_[suspend,resume] code in proc-v7.S
already correctly checks for CONFIG_ARM_CPU_SUSPEND, same is
true for functions for other architectures. ]
This fix is needed for decoupling suspend/resume and advanced
cpuidle support on Exynos platform (next patch fixes build for
config with CONFIG_PM_SLEEP=n and CONFIG_ARM_EXYNOS_CPUIDLE=y).
If this fix is not present then the following OOPS happens on
the first attempt to go into advanced cpuidle mode (AFTR):
[ 22.244143] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 22.250759] pgd = c0004000
[ 22.253445] [00000000] *pgd=00000000
[ 22.257012] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM
[ 22.262906] Modules linked in:
[ 22.265949] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-next-20140811-dirty #730
[ 22.273757] task: c05dce68 ti: c05d2000 task.ti: c05d2000
[ 22.279139] PC is at 0x0
[ 22.281661] LR is at __cpu_suspend_save+0x4c/0xa8
[ 22.286344] pc : [<00000000>] lr : [<c00125e0>] psr: a0000093
[ 22.286344] sp : c05d3ef4 ip : c05da414 fp : 00000001
[ 22.297799] r10: c05da414 r9 : c0609cb0 r8 : 0000000f
[ 22.303008] r7 : c05da444 r6 : 00000038 r5 : ea802c00 r4 : c05d3f14
[ 22.309517] r3 : 00000000 r2 : c05d3f4c r1 : 00000038 r0 : c05d3f20
[ 22.316029] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 22.323406] Control: 10c5387d Table: 69d5404a DAC: 00000015
[ 22.329135] Process swapper/0 (pid: 0, stack limit = 0xc05d2240)
[ 22.335124] Stack: (0xc05d3ef4 to 0xc05d4000)
[ 22.339466] 3ee0: ea802c00 00000038 c05d3f4c
[ 22.347626] 3f00: 00000000 00000007 c00123bc 00000000 c001d468 6a888000 c05d3f4c 80000000
[ 22.355785] 3f20: 00000007 c003d3a0 0000193d eaf9dde4 eaf9dde4 c02ef0c8 c000969c fffffffe
[ 22.363944] 3f40: 00000000 c0037b54 eaf9dbb8 e9d1a380 00000000 c001d468 c0609cb0 00000000
[ 22.372103] 3f60: c0609cb0 c061649e 00000001 c001250c eaf9dbb8 00000001 c0609cb0 c001d618
[ 22.380262] 3f80: c001d5d0 c02ef56c 2d9d2e1e 00000005 eaf9dbb8 c02edcc4 2d9d2e1e 00000005
[ 22.388421] 3fa0: c040446c c05da4ec c040446c eaf9dbb8 c05cfbb0 c004c580 c05dce68 c05b3ae8
[ 22.396580] 3fc0: 00000000 c058bb24 ffffffff ffffffff c058b5e4 00000000 00000000 c05b3ae8
[ 22.404740] 3fe0: c0616994 c05da47c c05b3ae4 c05ddeec 4000406a 40008074 00000000 00000000
[ 22.412909] [<c00125e0>] (__cpu_suspend_save) from [<c00123bc>] (__cpu_suspend+0x5c/0x70)
[ 22.421074] [<c00123bc>] (__cpu_suspend) from [<c05d3f4c>] (init_thread_union+0x1f4c/0x2000)
[ 22.429479] Code: bad PC value
[ 22.432518] ---[ end trace fb90ebf4217d0ad9 ]---
[ 22.437116] Kernel panic - not syncing: Attempted to kill the idle task!
[ 22.443800] Rebooting in 5 seconds..
This patch has been tested on Exynos4210 based Origen board.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CPU_32v6 currently selects CPU_USE_DOMAINS if CPU_V6 and MMU. This is
because ARM 1136 r0pX CPUs lack the v6k extensions, and therefore do
not have hardware thread registers. The lack of these registers requires
the kernel to update the vectors page at each context switch in order to
write a new TLS pointer. This write must be done via the userspace
mapping, since aliasing caches can lead to expensive flushing when using
kmap. Finally, this requires the vectors page to be mapped r/w for
kernel and r/o for user, which has implications for things like put_user
which must trigger CoW appropriately when targetting user pages.
The upshot of all this is that a v6/v7 kernel makes use of domains to
segregate kernel and user memory accesses. This has the nasty
side-effect of making device mappings executable, which has been
observed to cause subtle bugs on recent cores (e.g. Cortex-A15
performing a speculative instruction fetch from the GIC and acking an
interrupt in the process).
This patch solves this problem by removing the remaining domain support
from ARMv6. A new memory type is added specifically for the vectors page
which allows that page (and only that page) to be mapped as user r/o,
kernel r/w. All other user r/o pages are mapped also as kernel r/o.
Patch co-developed with Russell King.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit fixes the regression on Armada 370 (the kernal hang during
boot) introduced by the commit: "ARM: 7691/1: mm: kill unused
TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead".
When coming out of either a Wait for Interrupt (WFI) or a Wait for
Event (WFE) IDLE states, a specific timing sensitivity exists between
the retiring WFI/WFE instructions and the newly issued subsequent
instructions. This sensitivity can result in a CPU hang scenario. The
workaround is to insert either a Data Synchronization Barrier (DSB) or
Data Memory Barrier (DMB) command immediately after the WFI/WFE
instruction.
This commit was based on the work of Lior Amsalem, but heavily
modified to apply the errata fix dynamically according to the
processor type thanks to the suggestions of Russell King and Nicolas
Pitre.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since the new ASID code in b5466f8728527a05a493cc4abe9e6f034a1bbaab
("ARM: mm: remove IPI broadcasting on ASID rollover") was changed to
use 64bit operations it has broken the BE operation due to an issue
with the MM code accessing sub-fields of mm->context.id.
When running in BE mode we see the values in mm->context.id are stored
with the highest value first, so the LDR in the arch/arm/mm/proc-macros.S
reads the wrong part of this field. To resolve this, change the LDR in
the mmid macro to load from +4.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
PROT_NONE mappings apply the page protection attributes defined by _P000
which translate to PAGE_NONE for ARM. These attributes specify an XN,
RDONLY pte that is inaccessible to userspace. However, on kernels
configured without support for domains, such a pte *is* accessible to
the kernel and can be read via get_user, allowing tasks to read
PROT_NONE pages via syscalls such as read/write over a pipe.
This patch introduces a new software pte flag, L_PTE_NONE, that is set
to identify faulting, present entries.
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ARM v7 architecture introduced the concept of cache levels and related
control registers. New processors like A7 and A15 embed an L2 unified cache
controller that becomes part of the cache level hierarchy. Some operations in
the kernel like cpu_suspend and __cpu_disable do not require a flush of the
entire cache hierarchy to DRAM but just the cache levels belonging to the
Level of Unification Inner Shareable (LoUIS), which in most of ARM v7 systems
correspond to L1.
The current cache flushing API used in cpu_suspend and __cpu_disable,
flush_cache_all(), ends up flushing the whole cache hierarchy since for
v7 it cleans and invalidates all cache levels up to Level of Coherency
(LoC) which cripples system performance when used in hot paths like hotplug
and cpuidle.
Therefore a new kernel cache maintenance API must be added to cope with
latest ARM system requirements.
This patch adds flush_cache_louis() to the ARM kernel cache maintenance API.
This function cleans and invalidates all data cache levels up to the
Level of Unification Inner Shareable (LoUIS) and invalidates the instruction
cache for processors that support it (> v7).
This patch also creates an alias of the cache LoUIS function to flush_kern_all
for all processor versions prior to v7, so that the current cache flushing
behaviour is unchanged for those processors.
v7 cache maintenance code implements a cache LoUIS function that cleans and
invalidates the D-cache up to LoUIS and invalidates the I-cache, according
to the new API.
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This patch adds the MMU initialisation for the LPAE page table format.
The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new
proc-v7-3level.S file contains the TTB initialisation, context switch
and PTE setting code with the LPAE. The TTBRx split is based on the
PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit mappings
(supersections) and a few other memory types in mmu.c are conditionally
compiled.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 66a625a (ARM: mm: proc-macros: Add generic proc/cache/tlb struct
definition macros) introduced build errors when PM_SLEEP is not enabled.
The per-CPU do_suspend/do_resume functions are defined via the
preprocessor to constant 0. However, the macros which use these were
converted to assembly, resulting in undefined references to these
functions. Fix that by moving the ! ifdef section into proc-macros.S
and deleting it from all effected proc-*.S files.
Acked-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| |
|
|
|
|
|
|
|
|
|
| |
This patch adds some generic macros to reduce boilerplate when
declaring certain common structures in arch/arm/mm/*.S
Thanks to Russell King for outlining what the
define_processor_functions macro could look like.
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
|
| |
|
|
|
|
| |
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
| |\ |
|
| | |
| |
| |
| | |
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| | |
| |
| |
| |
| |
| |
| |
| | |
The hardware page tables use an XN bit 'execute never'. Historically,
we've had a Linux 'execute allow' bit, in the positive sense. Get rid
of this artifact as future hardware will continue to have the XN sense.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This switches the ordering of the Linux vs hardware page tables in
each page, thereby eliminating some of the arithmetic in the page
table walks. As we now place the Linux page table at the beginning
of the page, we can deal with the offset in the pgt by simply masking
it away, along with the other control bits.
This also makes the arithmetic all be positive, rather than a mixture.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Conflicts:
arch/arm/Kconfig
arch/arm/common/Makefile
arch/arm/kernel/Makefile
arch/arm/kernel/smp.c
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch removes the domain switching functionality via the set_fs and
__switch_to functions on cores that have a TLS register.
Currently, the ioremap and vmalloc areas share the same level 1 page
tables and therefore have the same domain (DOMAIN_KERNEL). When the
kernel domain is modified from Client to Manager (via the __set_fs or in
the __switch_to function), the XN (eXecute Never) bit is overridden and
newer CPUs can speculatively prefetch the ioremap'ed memory.
Linux performs the kernel domain switching to allow user-specific
functions (copy_to/from_user, get/put_user etc.) to access kernel
memory. In order for these functions to work with the kernel domain set
to Client, the patch modifies the LDRT/STRT and related instructions to
the LDR/STR ones.
The user pages access rights are also modified for kernel read-only
access rather than read/write so that the copy-on-write mechanism still
works. CPU_USE_DOMAINS gets disabled only if the hardware has a TLS register
(CPU_32v6K is defined) since writing the TLS value to the high vectors page
isn't possible.
The user addresses passed to the kernel are checked by the access_ok()
function so that they do not point to the kernel space.
Tested-by: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The current implementation of the v7_coherent_*_range function assumes
that the D and I cache lines have the same size, which is incorrect
architecturally. This patch adds the icache_line_size macro which reads
the CTR register. The main loop in v7_coherent_*_range is split in two
independent loops or the D and I caches. This also has the performance
advantage that the DSB is moved outside the main loop.
Reported-by: Kevin Sapp <ksapp@quicinc.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| |/
|
|
|
|
|
|
|
|
|
| |
The current implementation of the dcache_line_size macro reads the L1
cache size from the CCSIDR register. This, however, is not guaranteed to
be the smallest cache line in the cache hierarchy. The patch changes to
the macro to use the more architecturally correct CTR register.
Reported-by: Kevin Sapp <ksapp@quicinc.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| |\
| |
| |
| |
| |
| | |
Conflicts:
MAINTAINERS
arch/arm/mm/fault.c
|
| | |
| |
| |
| | |
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
| |/
|
|
|
|
|
|
| |
These old symbols are meaningless now that we have memory type
support implemented. The entire memory type field needs to be
modified rather than just a few bits twiddled.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| |
|
|
|
|
|
|
| |
As of the previous commit, MT_DEVICE_IXP2000 encodes to the same
PTE bit encoding as MT_DEVICE, so it's now redundant. Convert
MT_DEVICE_IXP2000 to use MT_DEVICE instead, and remove its aliases.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| |
|
|
| |
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| |
|
|
|
|
|
| |
There are actually only four separate implementations of set_pte_ext.
Use assembler macros to insert code for these into the proc-*.S files.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| |
|
|
|
|
|
| |
This patch adds support for the ARMv7 cores.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Most MMU-based CPUs have a restriction on the setting of the data cache
enable and mmu enable bits in the control register, whereby if the data
cache is enabled, the MMU must also be enabled. Enabling the data
cache without the MMU is an invalid combination.
However, there are CPUs where the data cache can be enabled without the
MMU.
In order to allow these CPUs to take advantage of that, provide a
method whereby each proc-*.S file defines the control regsiter value
for use with nommu (with the MMU disabled.) Later on, when we add
support for enabling the MMU on these devices, we can adjust the
"crval" macro to also enable the data cache for nommu.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
| |
|
|
|
|
|
| |
Delete obsoleted stuff from arch Makefile and rename
constants.h to asm-offsets.h
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
|
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
|
