Merge 4.4.133 into android-4.4

Changes in 4.4.133
	8139too: Use disable_irq_nosync() in rtl8139_poll_controller()
	bridge: check iface upper dev when setting master via ioctl
	dccp: fix tasklet usage
	ipv4: fix memory leaks in udp_sendmsg, ping_v4_sendmsg
	llc: better deal with too small mtu
	net: ethernet: sun: niu set correct packet size in skb
	net/mlx4_en: Verify coalescing parameters are in range
	net_sched: fq: take care of throttled flows before reuse
	net: support compat 64-bit time in {s,g}etsockopt
	openvswitch: Don't swap table in nlattr_set() after OVS_ATTR_NESTED is found
	qmi_wwan: do not steal interfaces from class drivers
	r8169: fix powering up RTL8168h
	sctp: handle two v4 addrs comparison in sctp_inet6_cmp_addr
	sctp: use the old asoc when making the cookie-ack chunk in dupcook_d
	tg3: Fix vunmap() BUG_ON() triggered from tg3_free_consistent().
	bonding: do not allow rlb updates to invalid mac
	tcp: ignore Fast Open on repair mode
	sctp: fix the issue that the cookie-ack with auth can't get processed
	sctp: delay the authentication for the duplicated cookie-echo chunk
	ALSA: timer: Call notifier in the same spinlock
	audit: move calcs after alloc and check when logging set loginuid
	arm64: introduce mov_q macro to move a constant into a 64-bit register
	arm64: Add work around for Arm Cortex-A55 Erratum 1024718
	futex: Remove unnecessary warning from get_futex_key
	futex: Remove duplicated code and fix undefined behaviour
	xfrm: fix xfrm_do_migrate() with AEAD e.g(AES-GCM)
	lockd: lost rollback of set_grace_period() in lockd_down_net()
	Revert "ARM: dts: imx6qdl-wandboard: Fix audio channel swap"
	l2tp: revert "l2tp: fix missing print session offset info"
	pipe: cap initial pipe capacity according to pipe-max-size limit
	futex: futex_wake_op, fix sign_extend32 sign bits
	kernel/exit.c: avoid undefined behaviour when calling wait4()
	usbip: usbip_host: refine probe and disconnect debug msgs to be useful
	usbip: usbip_host: delete device from busid_table after rebind
	usbip: usbip_host: run rebind from exit when module is removed
	usbip: usbip_host: fix NULL-ptr deref and use-after-free errors
	usbip: usbip_host: fix bad unlock balance during stub_probe()
	ALSA: usb: mixer: volume quirk for CM102-A+/102S+
	ALSA: hda: Add Lenovo C50 All in one to the power_save blacklist
	ALSA: control: fix a redundant-copy issue
	spi: pxa2xx: Allow 64-bit DMA
	powerpc/powernv: panic() on OPAL < V3
	powerpc/powernv: Remove OPALv2 firmware define and references
	powerpc/powernv: remove FW_FEATURE_OPALv3 and just use FW_FEATURE_OPAL
	cpuidle: coupled: remove unused define cpuidle_coupled_lock
	powerpc: Don't preempt_disable() in show_cpuinfo()
	vmscan: do not force-scan file lru if its absolute size is small
	proc: meminfo: estimate available memory more conservatively
	mm: filemap: remove redundant code in do_read_cache_page
	mm: filemap: avoid unnecessary calls to lock_page when waiting for IO to complete during a read
	signals: avoid unnecessary taking of sighand->siglock
	cpufreq: intel_pstate: Enable HWP by default
	tracing/x86/xen: Remove zero data size trace events trace_xen_mmu_flush_tlb{_all}
	proc read mm's {arg,env}_{start,end} with mmap semaphore taken.
	procfs: fix pthread cross-thread naming if !PR_DUMPABLE
	powerpc/powernv: Fix NVRAM sleep in invalid context when crashing
	mm: don't allow deferred pages with NEED_PER_CPU_KM
	s390/qdio: fix access to uninitialized qdio_q fields
	s390/cpum_sf: ensure sample frequency of perf event attributes is non-zero
	s390/qdio: don't release memory in qdio_setup_irq()
	s390: remove indirect branch from do_softirq_own_stack
	efi: Avoid potential crashes, fix the 'struct efi_pci_io_protocol_32' definition for mixed mode
	ARM: 8771/1: kprobes: Prohibit kprobes on do_undefinstr
	tick/broadcast: Use for_each_cpu() specially on UP kernels
	ARM: 8769/1: kprobes: Fix to use get_kprobe_ctlblk after irq-disabed
	ARM: 8770/1: kprobes: Prohibit probing on optimized_callback
	ARM: 8772/1: kprobes: Prohibit kprobes on get_user functions
	Btrfs: fix xattr loss after power failure
	btrfs: fix crash when trying to resume balance without the resume flag
	btrfs: fix reading stale metadata blocks after degraded raid1 mounts
	net: test tailroom before appending to linear skb
	packet: in packet_snd start writing at link layer allocation
	sock_diag: fix use-after-free read in __sk_free
	tcp: purge write queue in tcp_connect_init()
	ext2: fix a block leak
	s390: add assembler macros for CPU alternatives
	s390: move expoline assembler macros to a header
	s390/lib: use expoline for indirect branches
	s390/kernel: use expoline for indirect branches
	s390: move spectre sysfs attribute code
	s390: extend expoline to BC instructions
	s390: use expoline thunks in the BPF JIT
	scsi: libsas: defer ata device eh commands to libata
	scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()
	scsi: zfcp: fix infinite iteration on ERP ready list
	dmaengine: ensure dmaengine helpers check valid callback
	time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting
	gpio: rcar: Add Runtime PM handling for interrupts
	cfg80211: limit wiphy names to 128 bytes
	hfsplus: stop workqueue when fill_super() failed
	x86/kexec: Avoid double free_page() upon do_kexec_load() failure
	Linux 4.4.133

Change-Id: I0554b12889bc91add2a444da95f18d59c6fb9cdb
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

1 files changed, 26 insertions, 17 deletions

diff --git a/drivers/usb/usbip/stub_dev.c b/drivers/usb/usbip/stub_dev.c
index 0931f3271119..4aad99a59958 100644
--- a/drivers/usb/usbip/stub_dev.c
+++ b/drivers/usb/usbip/stub_dev.c
@@ -314,9 +314,9 @@ static int stub_probe(struct usb_device *udev)
 	struct stub_device *sdev = NULL;
 	const char *udev_busid = dev_name(&udev->dev);
 	struct bus_id_priv *busid_priv;
-	int rc;
+	int rc = 0;
 
-	dev_dbg(&udev->dev, "Enter\n");
+	dev_dbg(&udev->dev, "Enter probe\n");
 
 	/* check we should claim or not by busid_table */
 	busid_priv = get_busid_priv(udev_busid);
@@ -331,13 +331,15 @@ static int stub_probe(struct usb_device *udev)
 		 * other matched drivers by the driver core.
 		 * See driver_probe_device() in driver/base/dd.c
 		 */
-		return -ENODEV;
+		rc = -ENODEV;
+		goto call_put_busid_priv;
 	}
 
 	if (udev->descriptor.bDeviceClass == USB_CLASS_HUB) {
 		dev_dbg(&udev->dev, "%s is a usb hub device... skip!\n",
 			 udev_busid);
-		return -ENODEV;
+		rc = -ENODEV;
+		goto call_put_busid_priv;
 	}
 
 	if (!strcmp(udev->bus->bus_name, "vhci_hcd")) {
@@ -345,13 +347,16 @@ static int stub_probe(struct usb_device *udev)
 			"%s is attached on vhci_hcd... skip!\n",
 			udev_busid);
 
-		return -ENODEV;
+		rc = -ENODEV;
+		goto call_put_busid_priv;
 	}
 
 	/* ok, this is my device */
 	sdev = stub_device_alloc(udev);
-	if (!sdev)
-		return -ENOMEM;
+	if (!sdev) {
+		rc = -ENOMEM;
+		goto call_put_busid_priv;
+	}
 
 	dev_info(&udev->dev,
 		"usbip-host: register new device (bus %u dev %u)\n",
@@ -383,7 +388,9 @@ static int stub_probe(struct usb_device *udev)
 	}
 	busid_priv->status = STUB_BUSID_ALLOC;
 
-	return 0;
+	rc = 0;
+	goto call_put_busid_priv;
+
 err_files:
 	usb_hub_release_port(udev->parent, udev->portnum,
 			     (struct usb_dev_state *) udev);
@@ -394,6 +401,9 @@ err_port:
 
 	busid_priv->sdev = NULL;
 	stub_device_free(sdev);
+
+call_put_busid_priv:
+	put_busid_priv(busid_priv);
 	return rc;
 }
 
@@ -419,7 +429,7 @@ static void stub_disconnect(struct usb_device *udev)
 	struct bus_id_priv *busid_priv;
 	int rc;
 
-	dev_dbg(&udev->dev, "Enter\n");
+	dev_dbg(&udev->dev, "Enter disconnect\n");
 
 	busid_priv = get_busid_priv(udev_busid);
 	if (!busid_priv) {
@@ -432,7 +442,7 @@ static void stub_disconnect(struct usb_device *udev)
 	/* get stub_device */
 	if (!sdev) {
 		dev_err(&udev->dev, "could not get device");
-		return;
+		goto call_put_busid_priv;
 	}
 
 	dev_set_drvdata(&udev->dev, NULL);
@@ -447,12 +457,12 @@ static void stub_disconnect(struct usb_device *udev)
 				  (struct usb_dev_state *) udev);
 	if (rc) {
 		dev_dbg(&udev->dev, "unable to release port\n");
-		return;
+		goto call_put_busid_priv;
 	}
 
 	/* If usb reset is called from event handler */
 	if (busid_priv->sdev->ud.eh == current)
-		return;
+		goto call_put_busid_priv;
 
 	/* shutdown the current connection */
 	shutdown_busid(busid_priv);
@@ -463,12 +473,11 @@ static void stub_disconnect(struct usb_device *udev)
 	busid_priv->sdev = NULL;
 	stub_device_free(sdev);
 
-	if (busid_priv->status == STUB_BUSID_ALLOC) {
+	if (busid_priv->status == STUB_BUSID_ALLOC)
 		busid_priv->status = STUB_BUSID_ADDED;
-	} else {
-		busid_priv->status = STUB_BUSID_OTHER;
-		del_match_busid((char *)udev_busid);
-	}
+
+call_put_busid_priv:
+	put_busid_priv(busid_priv);
 }
 
 #ifdef CONFIG_PM