Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

Changes of note:

 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.

 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
    David Ahern.

 3) Allow the user to ask for the statistics to be filtered out of
    ipv4/ipv6 address netlink dumps.  From Sowmini Varadhan.

 4) More work to pass the network namespace context around deep into
    various packet path APIs, starting with the netfilter hooks.  From
    Eric W Biederman.

 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
    Richter.

 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.

 7) Support Very High Throughput in wireless MESH code, from Bob
    Copeland.

 8) Allow setting the ageing_time in switchdev/rocker.  From Scott
    Feldman.

 9) Properly autoload L2TP type modules, from Stephen Hemminger.

10) Fix and enable offload features by default in 8139cp driver, from
    David Woodhouse.

11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
    Jiri Benc.

12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
    Opstad.

13) Fix IPSEC flowcache overflows on large systems, from Steffen
    Klassert.

14) Convert bridging to track VLANs using rhashtable entries rather than
    a bitmap.  From Nikolay Aleksandrov.

15) Make TCP listener handling completely lockless, this is a major
    accomplishment.  Incoming request sockets now live in the
    established hash table just like any other socket too.

    From Eric Dumazet.

15) Provide more bridging attributes to netlink, from Nikolay
    Aleksandrov.

16) Use hash based algorithm for ipv4 multipath routing, this was very
    long overdue.  From Peter Nørlund.

17) Several y2038 cures, mostly avoiding timespec.  From Arnd Bergmann.

18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.

19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet.  This
    influences the port binding selection logic used by SO_REUSEPORT.

20) Add ipv6 support to VRF, from David Ahern.

21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.

22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.

23) Implement RACK loss recovery in TCP, from Yuchung Cheng.

24) Support multipath routes in MPLS, from Roopa Prabhu.

25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
    Dumazet.

26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
    Sudarsana Kalluru.

27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
    Sowa.

28) Support ipv6 geneve tunnels, from John W Linville.

29) Add flood control support to switchdev layer, from Ido Schimmel.

30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
    Hannes Frederic Sowa.

31) Support persistent maps and progs in bpf, from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
  sh_eth: use DMA barriers
  switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
  net: sched: kill dead code in sch_choke.c
  irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
  net: dsa: mv88e6xxx: include DSA ports in VLANs
  net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
  net/core: fix for_each_netdev_feature
  vlan: Invoke driver vlan hooks only if device is present
  arcnet/com20020: add LEDS_CLASS dependency
  bpf, verifier: annotate verbose printer with __printf
  dp83640: Only wait for timestamps for packets with timestamping enabled.
  ptp: Change ptp_class to a proper bitmask
  dp83640: Prune rx timestamp list before reading from it
  dp83640: Delay scheduled work.
  dp83640: Include hash in timestamp/packet matching
  ipv6: fix tunnel error handling
  net/mlx5e: Fix LSO vlan insertion
  net/mlx5e: Re-eanble client vlan TX acceleration
  net/mlx5e: Return error in case mlx5e_set_features() fails
  net/mlx5e: Don't allow more than max supported channels
  ...

1 files changed, 152 insertions, 23 deletions

diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c
index 96edc1346124..239de38fbd6a 100644
--- a/drivers/net/arcnet/com20020-pci.c
+++ b/drivers/net/arcnet/com20020-pci.c
@@ -1,7 +1,7 @@
 /*
  * Linux ARCnet driver - COM20020 PCI support
  * Contemporary Controls PCI20 and SOHARD SH-ARC PCI
- * 
+ *
  * Written 1994-1999 by Avery Pennarun,
  *    based on an ISA version by David Woodhouse.
  * Written 1999-2000 by Martin Mares <mj@ucw.cz>.
@@ -26,6 +26,9 @@
  *
  * **********************
  */
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
@@ -36,14 +39,12 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/arcdevice.h>
-#include <linux/com20020.h>
 #include <linux/list.h>
+#include <linux/io.h>
+#include <linux/leds.h>
 
-#include <asm/io.h>
-
-
-#define VERSION "arcnet: COM20020 PCI support\n"
+#include "arcdevice.h"
+#include "com20020.h"
 
 /* Module parameters */
 
@@ -62,11 +63,43 @@ module_param(clockp, int, 0);
 module_param(clockm, int, 0);
 MODULE_LICENSE("GPL");
 
+static void led_tx_set(struct led_classdev *led_cdev,
+			     enum led_brightness value)
+{
+	struct com20020_dev *card;
+	struct com20020_priv *priv;
+	struct com20020_pci_card_info *ci;
+
+	card = container_of(led_cdev, struct com20020_dev, tx_led);
+
+	priv = card->pci_priv;
+	ci = priv->ci;
+
+	outb(!!value, priv->misc + ci->leds[card->index].green);
+}
+
+static void led_recon_set(struct led_classdev *led_cdev,
+			     enum led_brightness value)
+{
+	struct com20020_dev *card;
+	struct com20020_priv *priv;
+	struct com20020_pci_card_info *ci;
+
+	card = container_of(led_cdev, struct com20020_dev, recon_led);
+
+	priv = card->pci_priv;
+	ci = priv->ci;
+
+	outb(!!value, priv->misc + ci->leds[card->index].red);
+}
+
 static void com20020pci_remove(struct pci_dev *pdev);
 
-static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static int com20020pci_probe(struct pci_dev *pdev,
+			     const struct pci_device_id *id)
 {
 	struct com20020_pci_card_info *ci;
+	struct com20020_pci_channel_map *mm;
 	struct net_device *dev;
 	struct arcnet_local *lp;
 	struct com20020_priv *priv;
@@ -83,9 +116,21 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
 
 	ci = (struct com20020_pci_card_info *)id->driver_data;
 	priv->ci = ci;
+	mm = &ci->misc_map;
 
 	INIT_LIST_HEAD(&priv->list_dev);
 
+	if (mm->size) {
+		ioaddr = pci_resource_start(pdev, mm->bar) + mm->offset;
+		r = devm_request_region(&pdev->dev, ioaddr, mm->size,
+					"com20020-pci");
+		if (!r) {
+			pr_err("IO region %xh-%xh already allocated.\n",
+			       ioaddr, ioaddr + mm->size - 1);
+			return -EBUSY;
+		}
+		priv->misc = ioaddr;
+	}
 
 	for (i = 0; i < ci->devcount; i++) {
 		struct com20020_pci_channel_map *cm = &ci->chan_map_tbl[i];
@@ -96,18 +141,19 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
 			ret = -ENOMEM;
 			goto out_port;
 		}
+		dev->dev_port = i;
 
 		dev->netdev_ops = &com20020_netdev_ops;
 
 		lp = netdev_priv(dev);
 
-		BUGMSG(D_NORMAL, "%s Controls\n", ci->name);
+		arc_printk(D_NORMAL, dev, "%s Controls\n", ci->name);
 		ioaddr = pci_resource_start(pdev, cm->bar) + cm->offset;
 
 		r = devm_request_region(&pdev->dev, ioaddr, cm->size,
 					"com20020-pci");
 		if (!r) {
-			pr_err("IO region %xh-%xh already allocated.\n",
+			pr_err("IO region %xh-%xh already allocated\n",
 			       ioaddr, ioaddr + cm->size - 1);
 			ret = -EBUSY;
 			goto out_port;
@@ -117,8 +163,8 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
 		 * ARCNET controller needs
 		 * this access to detect bustype
 		 */
-		outb(0x00, ioaddr + 1);
-		inb(ioaddr + 1);
+		arcnet_outb(0x00, ioaddr, COM20020_REG_W_COMMAND);
+		arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT);
 
 		dev->base_addr = ioaddr;
 		dev->dev_addr[0] = node;
@@ -131,7 +177,14 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
 		lp->timeout = timeout;
 		lp->hw.owner = THIS_MODULE;
 
-		if (ASTATUS() == 0xFF) {
+		/* Get the dev_id from the PLX rotary coder */
+		if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15))
+			dev->dev_id = 0xc;
+		dev->dev_id ^= inb(priv->misc + ci->rotary) >> 4;
+
+		snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i);
+
+		if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) {
 			pr_err("IO address %Xh is empty!\n", ioaddr);
 			ret = -EIO;
 			goto out_port;
@@ -143,21 +196,46 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
 
 		card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev),
 				    GFP_KERNEL);
-		if (!card) {
-			pr_err("%s out of memory!\n", __func__);
+		if (!card)
 			return -ENOMEM;
-		}
 
 		card->index = i;
 		card->pci_priv = priv;
+		card->tx_led.brightness_set = led_tx_set;
+		card->tx_led.default_trigger = devm_kasprintf(&pdev->dev,
+						GFP_KERNEL, "arc%d-%d-tx",
+						dev->dev_id, i);
+		card->tx_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+						"pci:green:tx:%d-%d",
+						dev->dev_id, i);
+
+		card->tx_led.dev = &dev->dev;
+		card->recon_led.brightness_set = led_recon_set;
+		card->recon_led.default_trigger = devm_kasprintf(&pdev->dev,
+						GFP_KERNEL, "arc%d-%d-recon",
+						dev->dev_id, i);
+		card->recon_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+						"pci:red:recon:%d-%d",
+						dev->dev_id, i);
+		card->recon_led.dev = &dev->dev;
 		card->dev = dev;
 
+		ret = devm_led_classdev_register(&pdev->dev, &card->tx_led);
+		if (ret)
+			goto out_port;
+
+		ret = devm_led_classdev_register(&pdev->dev, &card->recon_led);
+		if (ret)
+			goto out_port;
+
 		dev_set_drvdata(&dev->dev, card);
 
 		ret = com20020_found(dev, IRQF_SHARED);
 		if (ret)
 			goto out_port;
 
+		devm_arcnet_led_init(dev, dev->dev_id, i);
+
 		list_add(&card->list, &priv->list_dev);
 	}
 
@@ -190,7 +268,11 @@ static struct com20020_pci_card_info card_info_10mbit = {
 	.name = "ARC-PCI",
 	.devcount = 1,
 	.chan_map_tbl = {
-		{ 2, 0x00, 0x08 },
+		{
+			.bar = 2,
+			.offset = 0x00,
+			.size = 0x08,
+		},
 	},
 	.flags = ARC_CAN_10MBIT,
 };
@@ -199,7 +281,11 @@ static struct com20020_pci_card_info card_info_5mbit = {
 	.name = "ARC-PCI",
 	.devcount = 1,
 	.chan_map_tbl = {
-		{ 2, 0x00, 0x08 },
+		{
+			.bar = 2,
+			.offset = 0x00,
+			.size = 0x08,
+		},
 	},
 	.flags = ARC_IS_5MBIT,
 };
@@ -209,7 +295,11 @@ static struct com20020_pci_card_info card_info_sohard = {
 	.devcount = 1,
 	/* SOHARD needs PCI base addr 4 */
 	.chan_map_tbl = {
-		{4, 0x00, 0x08},
+		{
+			.bar = 4,
+			.offset = 0x00,
+			.size = 0x08
+		},
 	},
 	.flags = ARC_CAN_10MBIT,
 };
@@ -218,8 +308,24 @@ static struct com20020_pci_card_info card_info_eae_arc1 = {
 	.name = "EAE PLX-PCI ARC1",
 	.devcount = 1,
 	.chan_map_tbl = {
-		{ 2, 0x00, 0x08 },
+		{
+			.bar = 2,
+			.offset = 0x00,
+			.size = 0x08,
+		},
 	},
+	.misc_map = {
+		.bar = 2,
+		.offset = 0x10,
+		.size = 0x04,
+	},
+	.leds = {
+		{
+			.green = 0x0,
+			.red = 0x1,
+		},
+	},
+	.rotary = 0x0,
 	.flags = ARC_CAN_10MBIT,
 };
 
@@ -227,9 +333,31 @@ static struct com20020_pci_card_info card_info_eae_ma1 = {
 	.name = "EAE PLX-PCI MA1",
 	.devcount = 2,
 	.chan_map_tbl = {
-		{ 2, 0x00, 0x08 },
-		{ 2, 0x08, 0x08 }
+		{
+			.bar = 2,
+			.offset = 0x00,
+			.size = 0x08,
+		}, {
+			.bar = 2,
+			.offset = 0x08,
+			.size = 0x08,
+		}
+	},
+	.misc_map = {
+		.bar = 2,
+		.offset = 0x10,
+		.size = 0x04,
+	},
+	.leds = {
+		{
+			.green = 0x0,
+			.red = 0x1,
+		}, {
+			.green = 0x2,
+			.red = 0x3,
+		},
 	},
+	.rotary = 0x0,
 	.flags = ARC_CAN_10MBIT,
 };
 
@@ -404,7 +532,8 @@ static struct pci_driver com20020pci_driver = {
 
 static int __init com20020pci_init(void)
 {
-	BUGLVL(D_NORMAL) printk(VERSION);
+	if (BUGLVL(D_NORMAL))
+		pr_info("%s\n", "COM20020 PCI support");
 	return pci_register_driver(&com20020pci_driver);
 }