Merge remote-tracking branch 'common/android-4.4-p' into lineage-18.1-caf-msm8998

# By Thomas Gleixner (11) and others
# Via Greg Kroah-Hartman
* google/common/android-4.4-p:
  Linux 4.4.283
  Revert "floppy: reintroduce O_NDELAY fix"
  fbmem: add margin check to fb_check_caps()
  vt_kdsetmode: extend console locking
  vringh: Use wiov->used to check for read/write desc order
  virtio: Improve vq->broken access to avoid any compiler optimization
  net: marvell: fix MVNETA_TX_IN_PRGRS bit number
  e1000e: Fix the max snoop/no-snoop latency for 10M
  USB: serial: option: add new VID/PID to support Fibocom FG150
  Revert "USB: serial: ch341: fix character loss at high transfer rates"
  can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters
  Linux 4.4.282
  mmc: dw_mmc: Fix occasional hang after tuning on eMMC
  ASoC: intel: atom: Fix breakage for PCM buffer address setup
  ipack: tpci200: fix many double free issues in tpci200_pci_probe
  ALSA: hda - fix the 'Capture Switch' value change notifications
  mmc: dw_mmc: Fix hang on data CRC error
  mmc: dw_mmc: call the dw_mci_prep_stop_abort() by default
  mmc: dw_mmc: Wait for data transfer after response errors.
  net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
  net: 6pack: fix slab-out-of-bounds in decode_data
  dccp: add do-while-0 stubs for dccp_pr_debug macros
  Bluetooth: hidp: use correct wait queue when removing ctrl_wait
  scsi: core: Avoid printing an error if target_alloc() returns -ENXIO
  scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()
  dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available
  ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
  dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()
  KVM: nSVM: avoid picking up unsupported bits from L2 in int_ctl (CVE-2021-3653)
  vmlinux.lds.h: Handle clang's module.{c,d}tor sections
  PCI/MSI: Enforce MSI[X] entry updates to be visible
  PCI/MSI: Enforce that MSI-X table entry is masked for update
  PCI/MSI: Mask all unused MSI-X entries
  PCI/MSI: Protect msi_desc::masked for multi-MSI
  PCI/MSI: Use msi_mask_irq() in pci_msi_shutdown()
  PCI/MSI: Correct misleading comments
  PCI/MSI: Do not set invalid bits in MSI mask
  PCI/MSI: Enable and mask MSI-X early
  x86/tools: Fix objdump version check again
  xen/events: Fix race in set_evtchn_to_irq
  net: Fix memory leak in ieee802154_raw_deliver
  i2c: dev: zero out array used for i2c reads from userspace
  ASoC: intel: atom: Fix reference to PCM buffer address
  ANDROID: xt_quota2: set usersize in xt_match registration object
  ANDROID: xt_quota2: clear quota2_log message before sending
  ANDROID: xt_quota2: remove trailing junk which might have a digit in it
  UPSTREAM: netfilter: x_tables: fix pointer leaks to userspace
  Linux 4.4.281
  ovl: prevent private clone if bind mount is not allowed
  net: xilinx_emaclite: Do not print real IOMEM pointer
  USB:ehci:fix Kunpeng920 ehci hardware problem
  pipe: increase minimum default pipe size to 2 pages
  net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset
  alpha: Send stop IPI to send to online CPUs
  reiserfs: check directory items on read from disk
  reiserfs: add check for root_inode in reiserfs_fill_super
  pcmcia: i82092: fix a null pointer dereference bug
  MIPS: Malta: Do not byte-swap accesses to the CBUS UART
  serial: 8250: Mask out floating 16/32-bit bus bits
  media: rtl28xxu: fix zero-length control request
  scripts/tracing: fix the bug that can't parse raw_trace_func
  USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
  USB: serial: ch341: fix character loss at high transfer rates
  USB: serial: option: add Telit FD980 composition 0x1056
  Bluetooth: defer cleanup of resources in hci_unregister_dev()
  net: vxge: fix use-after-free in vxge_device_unregister
  net: pegasus: fix uninit-value in get_interrupt_interval
  bnx2x: fix an error code in bnx2x_nic_load()
  mips: Fix non-POSIX regexp
  net: natsemi: Fix missing pci_disable_device() in probe and remove
  media: videobuf2-core: dequeue if start_streaming fails
  scsi: sr: Return correct event when media event code is 3
  ALSA: seq: Fix racy deletion of subscriber
  Linux 4.4.280
  rcu: Update documentation of rcu_read_unlock()
  futex,rt_mutex: Fix rt_mutex_cleanup_proxy_lock()
  futex: Avoid freeing an active timer
  futex: Handle transient "ownerless" rtmutex state correctly
  rtmutex: Make wait_lock irq safe
  futex: Futex_unlock_pi() determinism
  futex: Rework futex_lock_pi() to use rt_mutex_*_proxy_lock()
  futex: Pull rt_mutex_futex_unlock() out from under hb->lock
  futex,rt_mutex: Introduce rt_mutex_init_waiter()
  futex: Cleanup refcounting
  futex: Rename free_pi_state() to put_pi_state()
  Linux 4.4.279
  can: raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
  Revert "Bluetooth: Shutdown controller after workqueues are flushed or cancelled"
  net: Fix zero-copy head len calculation.
  r8152: Fix potential PM refcount imbalance
  regulator: rt5033: Fix n_voltages settings for BUCK and LDO
  btrfs: mark compressed range uptodate only if all bio succeed

 Conflicts:
	net/bluetooth/hci_core.c
	net/netfilter/xt_quota2.c

Change-Id: I66e2384c8cc40448a7bff34bb935c74e6103e924

1 files changed, 34 insertions, 13 deletions

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 581f5d0271f4..9eff3b41a086 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -380,7 +380,7 @@ static void dw_mci_start_command(struct dw_mci *host,
 
 static inline void send_stop_abort(struct dw_mci *host, struct mmc_data *data)
 {
-	struct mmc_command *stop = data->stop ? data->stop : &host->stop_abort;
+	struct mmc_command *stop = &host->stop_abort;
 
 	dw_mci_start_command(host, stop, host->stop_cmdr);
 }
@@ -1202,10 +1202,7 @@ static void __dw_mci_start_request(struct dw_mci *host,
 		spin_unlock_irqrestore(&host->irq_lock, irqflags);
 	}
 
-	if (mrq->stop)
-		host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop);
-	else
-		host->stop_cmdr = dw_mci_prep_stop_abort(host, cmd);
+	host->stop_cmdr = dw_mci_prep_stop_abort(host, cmd);
 }
 
 static void dw_mci_start_request(struct dw_mci *host,
@@ -1744,8 +1741,34 @@ static void dw_mci_tasklet_func(unsigned long priv)
 			}
 
 			if (cmd->data && err) {
-				dw_mci_stop_dma(host);
+				/*
+				 * During UHS tuning sequence, sending the stop
+				 * command after the response CRC error would
+				 * throw the system into a confused state
+				 * causing all future tuning phases to report
+				 * failure.
+				 *
+				 * In such case controller will move into a data
+				 * transfer state after a response error or
+				 * response CRC error. Let's let that finish
+				 * before trying to send a stop, so we'll go to
+				 * STATE_SENDING_DATA.
+				 *
+				 * Although letting the data transfer take place
+				 * will waste a bit of time (we already know
+				 * the command was bad), it can't cause any
+				 * errors since it's possible it would have
+				 * taken place anyway if this tasklet got
+				 * delayed. Allowing the transfer to take place
+				 * avoids races and keeps things simple.
+				 */
+				if (err != -ETIMEDOUT) {
+					state = STATE_SENDING_DATA;
+					continue;
+				}
+
 				send_stop_abort(host, data);
+				dw_mci_stop_dma(host);
 				state = STATE_SENDING_STOP;
 				break;
 			}
@@ -1769,11 +1792,10 @@ static void dw_mci_tasklet_func(unsigned long priv)
 			 */
 			if (test_and_clear_bit(EVENT_DATA_ERROR,
 					       &host->pending_events)) {
-				dw_mci_stop_dma(host);
-				if (data->stop ||
-				    !(host->data_status & (SDMMC_INT_DRTO |
+				if (!(host->data_status & (SDMMC_INT_DRTO |
 							   SDMMC_INT_EBE)))
 					send_stop_abort(host, data);
+				dw_mci_stop_dma(host);
 				state = STATE_DATA_ERROR;
 				break;
 			}
@@ -1807,11 +1829,10 @@ static void dw_mci_tasklet_func(unsigned long priv)
 			 */
 			if (test_and_clear_bit(EVENT_DATA_ERROR,
 					       &host->pending_events)) {
-				dw_mci_stop_dma(host);
-				if (data->stop ||
-				    !(host->data_status & (SDMMC_INT_DRTO |
+				if (!(host->data_status & (SDMMC_INT_DRTO |
 							   SDMMC_INT_EBE)))
 					send_stop_abort(host, data);
+				dw_mci_stop_dma(host);
 				state = STATE_DATA_ERROR;
 				break;
 			}
@@ -1886,7 +1907,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
 			host->cmd = NULL;
 			host->data = NULL;
 
-			if (mrq->stop)
+			if (!mrq->sbc && mrq->stop)
 				dw_mci_command_complete(host, mrq->stop);
 			else
 				host->cmd_status = 0;