Merge 4.4.237 into android-4.4-p

Changes in 4.4.237
	ARM: dts: socfpga: fix register entry for timer3 on Arria10
	scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA
	drivers/net/wan/lapbether: Added needed_tailroom
	firestream: Fix memleak in fs_open
	drivers/net/wan/lapbether: Set network_header before transmitting
	xfs: initialize the shortform attr header padding entry
	drivers/net/wan/hdlc_cisco: Add hard_header_len
	ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled
	gcov: Disable gcov build with GCC 10
	iio: adc: mcp3422: fix locking scope
	iio: adc: mcp3422: fix locking on error path
	iio:light:ltr501 Fix timestamp alignment issue.
	iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak.
	iio:accel:mma8452: Fix timestamp alignment and prevent data leak.
	USB: core: add helpers to retrieve endpoints
	staging: wlan-ng: fix out of bounds read in prism2sta_probe_usb()
	btrfs: fix wrong address when faulting in pages in the search ioctl
	scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem
	rbd: require global CAP_SYS_ADMIN for mapping and unmapping
	fbcon: remove soft scrollback code
	fbcon: remove now unusued 'softback_lines' cursor() argument
	vgacon: remove software scrollback support
	KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit
	video: fbdev: fix OOB read in vga_8planes_imageblit()
	USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter
	USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules
	usb: Fix out of sync data toggle if a configured device is reconfigured
	gcov: add support for GCC 10.1
	NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall
	scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort
	scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery
	SUNRPC: stop printk reading past end of string
	rapidio: Replace 'select' DMAENGINES 'with depends on'
	i2c: algo: pca: Reapply i2c bus settings after reset
	MIPS: SNI: Fix MIPS_L1_CACHE_SHIFT
	perf test: Free formats for perf pmu parse test
	fbcon: Fix user font detection test at fbcon_resize().
	MIPS: SNI: Fix spurious interrupts
	USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook
	USB: UAS: fix disconnect by unplugging a hub
	usblp: fix race between disconnect() and read()
	Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists
	serial: 8250_pci: Add Realtek 816a and 816b
	ehci-hcd: Move include to keep CRC stable
	powerpc/dma: Fix dma_map_ops::get_required_mask
	x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y
	Linux 4.4.237

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: If3f7701823084090849a6866ba1e52a0276c9621

1 files changed, 23 insertions, 12 deletions

diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 3a9db4626cb6..1886588b9ea3 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -50,8 +50,22 @@ static void pca_reset(struct i2c_algo_pca_data *adap)
 		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IPRESET);
 		pca_outw(adap, I2C_PCA_IND, 0xA5);
 		pca_outw(adap, I2C_PCA_IND, 0x5A);
+
+		/*
+		 * After a reset we need to re-apply any configuration
+		 * (calculated in pca_init) to get the bus in a working state.
+		 */
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IMODE);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.mode);
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_ISCLL);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.tlow);
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_ISCLH);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.thi);
+
+		pca_set_con(adap, I2C_PCA_CON_ENSIO);
 	} else {
 		adap->reset_chip(adap->data);
+		pca_set_con(adap, I2C_PCA_CON_ENSIO | adap->bus_settings.clock_freq);
 	}
 }
 
@@ -435,13 +449,14 @@ static int pca_init(struct i2c_adapter *adap)
 				" Use the nominal frequency.\n", adap->name);
 		}
 
-		pca_reset(pca_data);
-
 		clock = pca_clock(pca_data);
 		printk(KERN_INFO "%s: Clock frequency is %dkHz\n",
 		     adap->name, freqs[clock]);
 
-		pca_set_con(pca_data, I2C_PCA_CON_ENSIO | clock);
+		/* Store settings as these will be needed when the PCA chip is reset */
+		pca_data->bus_settings.clock_freq = clock;
+
+		pca_reset(pca_data);
 	} else {
 		int clock;
 		int mode;
@@ -508,19 +523,15 @@ static int pca_init(struct i2c_adapter *adap)
 			thi = tlow * min_thi / min_tlow;
 		}
 
+		/* Store settings as these will be needed when the PCA chip is reset */
+		pca_data->bus_settings.mode = mode;
+		pca_data->bus_settings.tlow = tlow;
+		pca_data->bus_settings.thi = thi;
+
 		pca_reset(pca_data);
 
 		printk(KERN_INFO
 		     "%s: Clock frequency is %dHz\n", adap->name, clock * 100);
-
-		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IMODE);
-		pca_outw(pca_data, I2C_PCA_IND, mode);
-		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLL);
-		pca_outw(pca_data, I2C_PCA_IND, tlow);
-		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLH);
-		pca_outw(pca_data, I2C_PCA_IND, thi);
-
-		pca_set_con(pca_data, I2C_PCA_CON_ENSIO);
 	}
 	udelay(500); /* 500 us for oscillator to stabilise */