msm8996-common: rootdir: Remove useless scripts

Signed-off-by: dd3boh <dade.garberi@gmail.com>

1 files changed, 0 insertions, 280 deletions

diff --git a/rootdir/etc/init.qcom.usb.sh b/rootdir/etc/init.qcom.usb.sh
deleted file mode 100755
index e0e6f1d..0000000
--- a/rootdir/etc/init.qcom.usb.sh
+++ /dev/null
@@ -1,280 +0,0 @@
-#!/system/bin/sh
-# Copyright (c) 2012, The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-#       copyright notice, this list of conditions and the following
-#       disclaimer in the documentation and/or other materials provided
-#       with the distribution.
-#     * Neither the name of The Linux Foundation nor the names of its
-#       contributors may be used to endorse or promote products derived
-#      from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
-# ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
-# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
-# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-#
-chown -h root.system /sys/devices/platform/msm_hsusb/gadget/wakeup
-chmod -h 220 /sys/devices/platform/msm_hsusb/gadget/wakeup
-
-# Set platform variables
-if [ -f /sys/devices/soc0/hw_platform ]; then
-    soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null
-else
-    soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null
-fi
-
-# Get hardware revision
-if [ -f /sys/devices/soc0/revision ]; then
-    soc_revision=`cat /sys/devices/soc0/revision` 2> /dev/null
-else
-    soc_revision=`cat /sys/devices/system/soc/soc0/revision` 2> /dev/null
-fi
-
-#
-# Allow persistent usb charging disabling
-# User needs to set usb charging disabled in persist.usb.chgdisabled
-#
-target=`getprop ro.board.platform`
-usbchgdisabled=`getprop persist.usb.chgdisabled`
-case "$usbchgdisabled" in
-    "") ;; #Do nothing here
-    * )
-    case $target in
-        "msm8660")
-        echo "$usbchgdisabled" > /sys/module/pmic8058_charger/parameters/disabled
-        echo "$usbchgdisabled" > /sys/module/smb137b/parameters/disabled
-	;;
-        "msm8960")
-        echo "$usbchgdisabled" > /sys/module/pm8921_charger/parameters/disabled
-	;;
-    esac
-esac
-
-usbcurrentlimit=`getprop persist.usb.currentlimit`
-case "$usbcurrentlimit" in
-    "") ;; #Do nothing here
-    * )
-    case $target in
-        "msm8960")
-        echo "$usbcurrentlimit" > /sys/module/pm8921_charger/parameters/usb_max_current
-	;;
-    esac
-esac
-
-#
-# Check ESOC for external MDM
-#
-# Note: currently only a single MDM is supported
-#
-if [ -d /sys/bus/esoc/devices ]; then
-for f in /sys/bus/esoc/devices/*; do
-    if [ -d $f ]; then
-        if [ `grep "^MDM" $f/esoc_name` ]; then
-            esoc_link=`cat $f/esoc_link`
-            break
-        fi
-    fi
-done
-fi
-
-target=`getprop ro.board.platform`
-
-#ifdef VENDOR_EDIT
-boot_mode=`getprop ro.boot.ftm_mode`
-echo "boot_mode: $boot_mode" > /dev/kmsg
-case "$boot_mode" in
-    "ftm_at" | "ftm_rf" | "ftm_wlan" | "ftm_mos")
-    usb_config=`getprop persist.sys.usb.config`
-    echo "BEFORE boot_mode: $usb_config" > /dev/kmsg
-    if [ "$usb_config" != "diag,adb" ] ; then
-        setprop persist.sys.usb.config diag,adb
-    fi
-    ;;
-esac
-usb_config=`getprop persist.sys.usb.config`
-echo "AFTER boot_mode: $usb_config" > /dev/kmsg
-#endif
-
-#
-# Allow USB enumeration with default PID/VID
-#
-baseband=`getprop ro.baseband`
-echo 1  > /sys/class/android_usb/f_mass_storage/lun/nofua
-usb_config=`getprop persist.sys.usb.config`
-echo "BEFORE: $usb_config" > /dev/kmsg
-case "$usb_config" in
-    "" | "adb" | "none") #USB persist config not set, select default configuration
-      case "$esoc_link" in
-          "PCIe")
-              setprop persist.sys.usb.config diag,diag_mdm,serial_cdev,rmnet_qti_ether,mass_storage,adb
-          ;;
-          *)
-	  case "$soc_hwplatform" in
-	      "Dragon")
-	          setprop persist.sys.usb.config diag,adb
-	      ;;
-              *)
-		case "$target" in
-                        "msm8916")
-                            setprop persist.sys.usb.config diag,serial_smd,rmnet_bam,adb
-                        ;;
-                        "msm8994" | "msm8992")
-                            if [ "$soc_hwplatform" == "Dragon" ]; then
-                               setprop persist.sys.usb.config diag,adb
-                            else
-                               setprop persist.sys.usb.config diag,serial_smd,serial_tty,rmnet_ipa,mass_storage,adb
-                            fi
-                        ;;
-			"msm8996")
-			    if [ "$soc_revision" == "1.0" -o "$soc_hwplatform" == "Dragon" ]
-			    then
-                               setprop persist.sys.usb.config diag,adb
-			    #[BSP-66]-Anderson-Disable_set_the_property.
-			    #This will ause BSP-66 issue and cause all the port enable in default.
-			    #else
-			       #setprop persist.sys.usb.config diag,serial_cdev,serial_tty,rmnet_ipa,mass_storage,adb
-			    fi
-			;;
-                        "msm8909" | "msm8937")
-                            setprop persist.sys.usb.config diag,serial_smd,rmnet_qti_bam,adb
-                        ;;
-                        "msm8952" | "titanium")
-                            setprop persist.sys.usb.config diag,serial_smd,rmnet_ipa,adb
-                        ;;
-                        *)
-                            setprop persist.sys.usb.config diag,adb
-                        ;;
-                    esac
-              ;;
-          esac
-          ;;
-      esac
-      ;;
-  * ) ;; #USB persist config exists, do nothing
-esac
-
-
-
-#
-# Do target specific things
-#
-case "$target" in
-    "msm8974")
-# Select USB BAM - 2.0 or 3.0
-        echo ssusb > /sys/bus/platform/devices/usb_bam/enable
-    ;;
-    "apq8084")
-	if [ "$baseband" == "apq" ]; then
-		echo "msm_hsic_host" > /sys/bus/platform/drivers/xhci_msm_hsic/unbind
-	fi
-    ;;
-    "msm8226")
-         if [ -e /sys/bus/platform/drivers/msm_hsic_host ]; then
-             if [ ! -L /sys/bus/usb/devices/1-1 ]; then
-                 echo msm_hsic_host > /sys/bus/platform/drivers/msm_hsic_host/unbind
-             fi
-         fi
-    ;;
-    "msm8994" | "msm8992" | "msm8996" | "titanium")
-        echo BAM2BAM_IPA > /sys/class/android_usb/android0/f_rndis_qc/rndis_transports
-        echo 131072 > /sys/module/g_android/parameters/mtp_tx_req_len
-        echo 131072 > /sys/module/g_android/parameters/mtp_rx_req_len
-    ;;
-esac
-
-#
-# set module params for embedded rmnet devices
-#
-rmnetmux=`getprop persist.rmnet.mux`
-case "$baseband" in
-    "mdm" | "dsda" | "sglte2")
-        case "$rmnetmux" in
-            "enabled")
-                    echo 1 > /sys/module/rmnet_usb/parameters/mux_enabled
-                    echo 8 > /sys/module/rmnet_usb/parameters/no_fwd_rmnet_links
-                    echo 17 > /sys/module/rmnet_usb/parameters/no_rmnet_insts_per_dev
-            ;;
-        esac
-        echo 1 > /sys/module/rmnet_usb/parameters/rmnet_data_init
-        # Allow QMUX daemon to assign port open wait time
-        chown -h radio.radio /sys/devices/virtual/hsicctl/hsicctl0/modem_wait
-    ;;
-    "dsda2")
-          echo 2 > /sys/module/rmnet_usb/parameters/no_rmnet_devs
-          echo hsicctl,hsusbctl > /sys/module/rmnet_usb/parameters/rmnet_dev_names
-          case "$rmnetmux" in
-               "enabled") #mux is neabled on both mdms
-                      echo 3 > /sys/module/rmnet_usb/parameters/mux_enabled
-                      echo 8 > /sys/module/rmnet_usb/parameters/no_fwd_rmnet_links
-                      echo 17 > write /sys/module/rmnet_usb/parameters/no_rmnet_insts_per_dev
-               ;;
-               "enabled_hsic") #mux is enabled on hsic mdm
-                      echo 1 > /sys/module/rmnet_usb/parameters/mux_enabled
-                      echo 8 > /sys/module/rmnet_usb/parameters/no_fwd_rmnet_links
-                      echo 17 > /sys/module/rmnet_usb/parameters/no_rmnet_insts_per_dev
-               ;;
-               "enabled_hsusb") #mux is enabled on hsusb mdm
-                      echo 2 > /sys/module/rmnet_usb/parameters/mux_enabled
-                      echo 8 > /sys/module/rmnet_usb/parameters/no_fwd_rmnet_links
-                      echo 17 > /sys/module/rmnet_usb/parameters/no_rmnet_insts_per_dev
-               ;;
-          esac
-          echo 1 > /sys/module/rmnet_usb/parameters/rmnet_data_init
-          # Allow QMUX daemon to assign port open wait time
-          chown -h radio.radio /sys/devices/virtual/hsicctl/hsicctl0/modem_wait
-    ;;
-esac
-
-#
-# Add support for exposing lun0 as cdrom in mass-storage
-#
-cdromname="/system/etc/cdrom_install.iso"
-platformver=`cat /sys/devices/soc0/hw_platform`
-case "$target" in
-	"msm8226" | "msm8610" | "msm8916")
-		case $platformver in
-			"QRD")
-				echo "mounting usbcdrom lun"
-				echo $cdromname > /sys/class/android_usb/android0/f_mass_storage/rom/file
-				chmod 0444 /sys/class/android_usb/android0/f_mass_storage/rom/file
-				;;
-		esac
-		;;
-esac
-
-#
-# Initialize RNDIS Diag option. If unset, set it to 'none'.
-#
-diag_extra=`getprop persist.sys.usb.config.extra`
-if [ "$diag_extra" == "" ]; then
-	setprop persist.sys.usb.config.extra none
-fi
-
-# soc_ids for 8937
-if [ -f /sys/devices/soc0/soc_id ]; then
-	soc_id=`cat /sys/devices/soc0/soc_id`
-else
-	soc_id=`cat /sys/devices/system/soc/soc0/id`
-fi
-
-# enable rps cpus on msm8937 target
-setprop sys.usb.rps_mask 0
-case "$soc_id" in
-	"294" | "295")
-		setprop sys.usb.rps_mask 10
-	;;
-esac