summaryrefslogtreecommitdiff
path: root/drivers/usb/class (follow)
Commit message (Collapse)AuthorAge
* USB: cdc-acm: fix break reportingJohan Hovold2021-10-17
| | | | | | | | | | | | | | | | commit 58fc1daa4d2e9789b9ffc880907c961ea7c062cc upstream. A recent change that started reporting break events forgot to push the event to the line discipline, which meant that a detected break would not be reported until further characters had been receive (the port could even have been closed and reopened in between). Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls") Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210929090937.7410-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: fix racy tty buffer accessesJohan Hovold2021-10-17
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 65a205e6113506e69a503b61d97efec43fc10fd7 upstream. A recent change that started reporting break events to the line discipline caused the tty-buffer insertions to no longer be serialised by inserting events also from the completion handler for the interrupt endpoint. Completion calls for distinct endpoints are not guaranteed to be serialised. For example, in case a host-controller driver uses bottom-half completion, the interrupt and bulk-in completion handlers can end up running in parallel on two CPUs (high-and low-prio tasklets, respectively) thereby breaking the tty layer's single producer assumption. Fix this by holding the read lock also when inserting characters from the bulk endpoint. Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls") Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210929090937.7410-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: blacklist Heimann USB Appset deviceHannu Hartikainen2021-07-20
| | | | | | | | | | | | | | | | | | | | | commit 4897807753e078655a78de39ed76044d784f3e63 upstream. The device (32a7:0000 Heimann Sensor GmbH USB appset demo) claims to be a CDC-ACM device in its descriptors but in fact is not. If it is run with echo disabled it returns garbled data, probably due to something that happens in the TTY layer. And when run with echo enabled (the default), it will mess up the calibration data of the sensor the first time any data is sent to the device. In short, I had a bad time after connecting the sensor and trying to get it to work. I hope blacklisting it in the cdc-acm driver will save someone else a bit of trouble. Signed-off-by: Hannu Hartikainen <hannu@hrtk.in> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210622141454.337948-1-hannu@hrtk.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: fix unprivileged TIOCCSERIALJohan Hovold2021-05-22
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit dd5619582d60007139f0447382d2839f4f9e339b ] TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. A non-privileged user has only ever been able to set the since long deprecated ASYNC_SPD flags and trying to change any other *supported* feature should result in -EPERM being returned. Setting the current values for any supported features should return success. Fix the cdc-acm implementation which instead indicated that the TIOCSSERIAL ioctl was not even implemented when a non-privileged user set the current values. Fixes: ba2d8ce9db0a ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)") Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210408131602.27956-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* USB: cdc-acm: fix use-after-free after probe failureJohan Hovold2021-04-07
| | | | | | | | | | | | | | | | | commit 4e49bf376c0451ad2eae2592e093659cde12be9a upstream. If tty-device registration fails the driver would fail to release the data interface. When the device is later disconnected, the disconnect callback would still be called for the data interface and would go about releasing already freed resources. Fixes: c93d81955005 ("usb: cdc-acm: fix error handling in acm_probe()") Cc: stable@vger.kernel.org # 3.9 Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210322155318.9837-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: downgrade message to debugOliver Neukum2021-04-07
| | | | | | | | | | | | | commit e4c77070ad45fc940af1d7fb1e637c349e848951 upstream. This failure is so common that logging an error here amounts to spamming log files. Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210311130126.15972-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-acm: fix BREAK rx code path adding necessary callsOliver Neukum2021-04-07
| | | | | | | | | | | | | commit 08dff274edda54310d6f1cf27b62fddf0f8d146e upstream. Counting break events is nice but we should actually report them to the tty layer. Fixes: 5a6a62bdb9257 ("cdc-acm: add TIOCMIWAIT") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20210311133714.31881-1-oneukum@suse.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Goodix Fingerprint device is not a modemYorick de Wid2021-03-17
| | | | | | | | | | | | | | | | | | | commit 4d8654e81db7346f915eca9f1aff18f385cab621 upstream. The CDC ACM driver is false matching the Goodix Fingerprint device against the USB_CDC_ACM_PROTO_AT_V25TER. The Goodix Fingerprint device is a biometrics sensor that should be handled in user-space. libfprint has some support for Goodix fingerprint sensors, although not for this particular one. It is possible that the vendor allocates a PID per OEM (Lenovo, Dell etc). If this happens to be the case then more devices from the same vendor could potentially match the ACM modem module table. Signed-off-by: Yorick de Wid <ydewid@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210213144901.53199-1-ydewid@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usblp: don't call usb_set_interface if there's a single altJeremy Figgins2021-02-10
| | | | | | | | | | | | | | | commit d8c6edfa3f4ee0d45d7ce5ef18d1245b78774b9d upstream. Some devices, such as the Winbond Electronics Corp. Virtual Com Port (Vendor=0416, ProdId=5011), lockup when usb_set_interface() or usb_clear_halt() are called. This device has only a single altsetting, so it should not be necessary to call usb_set_interface(). Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Jeremy Figgins <kernel@jeremyfiggins.com> Link: https://lore.kernel.org/r/YAy9kJhM/rG8EQXC@watson Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usblp: fix DMA to stackJohan Hovold2021-01-12
| | | | | | | | | | | | | | | | | | | | commit 020a1f453449294926ca548d8d5ca970926e8dfd upstream. Stack-allocated buffers cannot be used for DMA (on all architectures). Replace the HP-channel macro with a helper function that allocates a dedicated transfer buffer so that it can continue to be used with arguments from the stack. Note that the buffer is cleared on allocation as usblp_ctrl_msg() returns success also on short transfers (the buffer is only used for debugging). Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210104145302.2087-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: blacklist another IR Droid deviceSean Young2021-01-12
| | | | | | | | | | | | | | commit 0ffc76539e6e8d28114f95ac25c167c37b5191b3 upstream. This device is supported by the IR Toy driver. Reported-by: Georgi Bakalski <georgi.bakalski@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201227134502.4548-2-sean@mess.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download modeChris Brandt2020-11-18
| | | | | | | | | | | | | | | commit 6d853c9e4104b4fc8d55dc9cd3b99712aa347174 upstream. Renesas R-Car and RZ/G SoCs have a firmware download mode over USB. However, on reset a banner string is transmitted out which is not expected to be echoed back and will corrupt the protocol. Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Link: https://lore.kernel.org/r/20201111131209.3977903-1-chris.brandt@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-wdm: Make wdm_flush() interruptible and add wdm_fsync().Oliver Neukum2020-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 37d2a36394d954413a495da61da1b2a51ecd28ab upstream. syzbot is reporting hung task at wdm_flush() [1], for there is a circular dependency that wdm_flush() from flip_close() for /dev/cdc-wdm0 forever waits for /dev/raw-gadget to be closed while close() for /dev/raw-gadget cannot be called unless close() for /dev/cdc-wdm0 completes. Tetsuo Handa considered that such circular dependency is an usage error [2] which corresponds to an unresponding broken hardware [3]. But Alan Stern responded that we should be prepared for such hardware [4]. Therefore, this patch changes wdm_flush() to use wait_event_interruptible_timeout() which gives up after 30 seconds, for hardware that remains silent must be ignored. The 30 seconds are coming out of thin air. Changing wait_event() to wait_event_interruptible_timeout() makes error reporting from close() syscall less reliable. To compensate it, this patch also implements wdm_fsync() which does not use timeout. Those who want to be very sure that data has gone out to the device are now advised to call fsync(), with a caveat that fsync() can return -EINVAL when running on older kernels which do not implement wdm_fsync(). This patch also fixes three more problems (listed below) found during exhaustive discussion and testing. Since multiple threads can concurrently call wdm_write()/wdm_flush(), we need to use wake_up_all() whenever clearing WDM_IN_USE in order to make sure that all waiters are woken up. Also, error reporting needs to use fetch-and-clear approach in order not to report same error for multiple times. Since wdm_flush() checks WDM_DISCONNECTING, wdm_write() should as well check WDM_DISCONNECTING. In wdm_flush(), since locks are not held, it is not safe to dereference desc->intf after checking that WDM_DISCONNECTING is not set [5]. Thus, remove dev_err() from wdm_flush(). [1] https://syzkaller.appspot.com/bug?id=e7b761593b23eb50855b9ea31e3be5472b711186 [2] https://lkml.kernel.org/r/27b7545e-8f41-10b8-7c02-e35a08eb1611@i-love.sakura.ne.jp [3] https://lkml.kernel.org/r/79ba410f-e0ef-2465-b94f-6b9a4a82adf5@i-love.sakura.ne.jp [4] https://lkml.kernel.org/r/20200530011040.GB12419@rowland.harvard.edu [5] https://lkml.kernel.org/r/c85331fc-874c-6e46-a77f-0ef1dc075308@i-love.sakura.ne.jp Reported-by: syzbot <syzbot+854768b99f19e89d7f81@syzkaller.appspotmail.com> Cc: stable <stable@vger.kernel.org> Co-developed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200928141755.3476-1-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc-acm: add quirk to blacklist ETAS ES58X devicesVincent Mailhol2020-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a4f88430af896bf34ec25a7a5f0e053fb3d928e0 upstream. The ES58X devices has a CDC ACM interface (used for debug purpose). During probing, the device is thus recognized as USB Modem (CDC ACM), preventing the etas-es58x module to load: usbcore: registered new interface driver etas_es58x usb 1-1.1: new full-speed USB device number 14 using xhci_hcd usb 1-1.1: New USB device found, idVendor=108c, idProduct=0159, bcdDevice= 1.00 usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.1: Product: ES581.4 usb 1-1.1: Manufacturer: ETAS GmbH usb 1-1.1: SerialNumber: 2204355 cdc_acm 1-1.1:1.0: No union descriptor, testing for castrated device cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device Thus, these have been added to the ignore list in drivers/usb/class/cdc-acm.c N.B. Future firmware release of the ES58X will remove the CDC-ACM interface. `lsusb -v` of the three devices variant (ES581.4, ES582.1 and ES584.1): Bus 001 Device 011: ID 108c:0159 Robert Bosch GmbH ES581.4 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x108c Robert Bosch GmbH idProduct 0x0159 bcdDevice 1.00 iManufacturer 1 ETAS GmbH iProduct 2 ES581.4 iSerial 3 2204355 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0035 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Bus Powered Configuration bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 iInterface 4 ACM Control Interface CDC Header: bcdCDC 1.10 CDC Call Management: bmCapabilities 0x01 call management bDataInterface 0 CDC ACM: bmCapabilities 0x06 sends break line coding and serial state Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 10 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Bus 001 Device 012: ID 108c:0168 Robert Bosch GmbH ES582 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x108c Robert Bosch GmbH idProduct 0x0168 bcdDevice 1.00 iManufacturer 1 ETAS GmbH iProduct 2 ES582 iSerial 3 0108933 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0043 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 16 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Bus 001 Device 013: ID 108c:0169 Robert Bosch GmbH ES584.1 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x108c Robert Bosch GmbH idProduct 0x0169 bcdDevice 1.00 iManufacturer 1 ETAS GmbH iProduct 2 ES584.1 iSerial 3 0100320 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0043 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 16 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201002154219.4887-8-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usblp: fix race between disconnect() and read()Oliver Neukum2020-09-23
| | | | | | | | | | | | | commit 9cdabcb3ef8c24ca3a456e4db7b012befb688e73 upstream. read() needs to check whether the device has been disconnected before it tries to talk to the device. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200917103427.15740-1-oneukum@suse.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chipJoakim Tjernlund2020-06-29
| | | | | | | | | | | | | | | commit 03894573f2913181ee5aae0089f333b2131f2d4b upstream. USB_DEVICE(0x0424, 0x274e) can send data before cdc_acm is ready, causing garbage chars on the TTY causing stray input to the shell and/or login prompt. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20200605105418.22263-1-joakim.tjernlund@infinera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usblp: poison URBs upon disconnectOliver Neukum2020-06-29
| | | | | | | | | | | | | [ Upstream commit 296a193b06120aa6ae7cf5c0d7b5e5b55968026e ] syzkaller reported an URB that should have been killed to be active. We do not understand it, but this should fix the issue if it is real. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200507085806.5793-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* USB: cdc-acm: restore capability check orderMatthias Reichl2020-04-02
| | | | | | | | | | | | | | | | | | | | commit 62d65bdd9d05158aa2547f8ef72375535f3bc6e3 upstream. commit b401f8c4f492c ("USB: cdc-acm: fix rounding error in TIOCSSERIAL") introduced a regression by changing the order of capability and close settings change checks. When running with CAP_SYS_ADMIN setting the close settings to the values already set resulted in -EOPNOTSUPP. Fix this by changing the check order back to how it was before. Fixes: b401f8c4f492c ("USB: cdc-acm: fix rounding error in TIOCSSERIAL") Cc: Anthony Mallet <anthony.mallet@laas.fr> Cc: stable <stable@vger.kernel.org> Cc: Oliver Neukum <oneukum@suse.com> Signed-off-by: Matthias Reichl <hias@horus.com> Link: https://lore.kernel.org/r/20200327150350.3657-1-hias@horus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: fix rounding error in TIOCSSERIALAnthony Mallet2020-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b401f8c4f492cbf74f3f59c9141e5be3071071bb ] By default, tty_port_init() initializes those parameters to a multiple of HZ. For instance in line 69 of tty_port.c: port->close_delay = (50 * HZ) / 100; https://github.com/torvalds/linux/blob/master/drivers/tty/tty_port.c#L69 With e.g. CONFIG_HZ = 250 (as this is the case for Ubuntu 18.04 linux-image-4.15.0-37-generic), the default setting for close_delay is thus 125. When ioctl(fd, TIOCGSERIAL, &s) is executed, the setting returned in user space is '12' (125/10). When ioctl(fd, TIOCSSERIAL, &s) is then executed with the same setting '12', the value is interpreted as '120' which is different from the current setting and a EPERM error may be raised by set_serial_info() if !CAP_SYS_ADMIN. https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c#L919 Fixes: ba2d8ce9db0a6 ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)") Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312133101.7096-2-anthony.mallet@laas.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIALAnthony Mallet2020-04-02
| | | | | | | | | | | | | | [ Upstream commit 633e2b2ded739a34bd0fb1d8b5b871f7e489ea29 ] close_delay and closing_wait are specified in hundredth of a second but stored internally in jiffies. Use the jiffies_to_msecs() and msecs_to_jiffies() functions to convert from each other. Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312133101.7096-1-anthony.mallet@laas.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* cdc-wdm: pass return value of recover_from_urb_lossYueHaibing2020-01-29
| | | | | | | | | | | [ Upstream commit 0742a338f5b3446a26de551ad8273fb41b2787f2 ] 'rv' is the correct return value, pass it upstream instead of 0 Fixes: 17d80d562fd7 ("USB: autosuspend for cdc-wdm") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* USB: usblp: fix use-after-free on disconnectJohan Hovold2019-10-29
| | | | | | | | | | | | | | | | commit 7a759197974894213621aa65f0571b51904733d6 upstream. A recent commit addressing a runtime PM use-count regression, introduced a use-after-free by not making sure we held a reference to the struct usb_interface for the lifetime of the driver data. Fixes: 9a31535859bf ("USB: usblp: fix runtime PM after driver unbind") Cc: stable <stable@vger.kernel.org> Reported-by: syzbot+cd24df4d075c319ebfc5@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191015175522.18490-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usblp: fix runtime PM after driver unbindJohan Hovold2019-10-17
| | | | | | | | | | | | | | | | | | | commit 9a31535859bfd8d1c3ed391f5e9247cd87bb7909 upstream. Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter") USB drivers must always balance their runtime PM gets and puts, including when the driver has already been unbound from the interface. Leaving the interface with a positive PM usage counter would prevent a later bound driver from suspending the device. Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191001084908.2003-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-wdm: fix race between write and disconnect due to flag abuseOliver Neukum2019-09-06
| | | | | | | | | | | | | | | | | | | | | | commit 1426bd2c9f7e3126e2678e7469dca9fd9fc6dd3e upstream. In case of a disconnect an ongoing flush() has to be made fail. Nevertheless we cannot be sure that any pending URB has already finished, so although they will never succeed, they still must not be touched. The clean solution for this is to check for WDM_IN_USE and WDM_DISCONNECTED in flush(). There is no point in ever clearing WDM_IN_USE, as no further writes make sense. The issue is as old as the driver. Fixes: afba937e540c9 ("USB: CDC WDM driver") Reported-by: syzbot+d232cca6ec42c2edb3fc@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190827103436.21143-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc-acm: make sure a refcount is taken early enoughOliver Neukum2019-08-25
| | | | | | | | | | | | | | | commit c52873e5a1ef72f845526d9f6a50704433f9c625 upstream. destroy() will decrement the refcount on the interface, so that it needs to be taken so early that it never undercounts. Fixes: 7fb57a019f94e ("USB: cdc-acm: Fix potential deadlock (lockdep warning)") Cc: stable <stable@vger.kernel.org> Reported-and-tested-by: syzbot+1b2449b7b5dc240d107a@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20190808142119.7998-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc-acm: send ZLP for Telit 3G Intel based modemsDaniele Palmas2019-01-16
| | | | | | | | | | | | commit 34aabf918717dd14e05051896aaecd3b16b53d95 upstream. Telit 3G Intel based modems require zero packet to be sent if out data size is equal to the endpoint max packet size. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader.Macpaul Lin2019-01-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit eafb27fa5283599ce6c5492ea18cf636a28222bb upstream. Mediatek Preloader is a proprietary embedded boot loader for loading Little Kernel and Linux into device DRAM. This boot loader also handle firmware update. Mediatek Preloader will be enumerated as a virtual COM port when the device is connected to Windows or Linux OS via CDC-ACM class driver. When the USB enumeration has been done, Mediatek Preloader will send out handshake command "READY" to PC actively instead of waiting command from the download tool. Since Linux 4.12, the commit "tty: reset termios state on device registration" (93857edd9829e144acb6c7e72d593f6e01aead66) causes Mediatek Preloader receiving some abnoraml command like "READYXX" as it sent. This will be recognized as an incorrect response. The behavior change also causes the download handshake fail. This change only affects subsequent connects if the reconnected device happens to get the same minor number. By disabling the ECHO termios flag could avoid this problem. However, it cannot be done by user space configuration when download tool open /dev/ttyACM0. This is because the device running Mediatek Preloader will send handshake command "READY" immediately once the CDC-ACM driver is ready. This patch wants to fix above problem by introducing "DISABLE_ECHO" property in driver_info. When Mediatek Preloader is connected, the CDC-ACM driver could disable ECHO flag in termios to avoid the problem. Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Cc: stable@vger.kernel.org Reviewed-by: Johan Hovold <johan@kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc-acm: add entry for Hiro (Conexant) modemMaarten Jacobs2018-11-27
| | | | | | | | | | | | | | | commit 63529eaa6164ef7ab4b907b25ac3648177e5e78f upstream. The cdc-acm kernel module currently does not support the Hiro (Conexant) H05228 USB modem. The patch below adds the device specific information: idVendor 0x0572 idProduct 0x1349 Signed-off-by: Maarten Jacobs <maarten256@outlook.com> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-acm: correct counting of UART states in serial state notificationTobias Herzog2018-11-10
| | | | | | | | | | | | | | | | | | | | commit f976d0e5747ca65ccd0fb2a4118b193d70aa1836 upstream. The usb standard ("Universal Serial Bus Class Definitions for Communication Devices") distiguishes between "consistent signals" (DSR, DCD), and "irregular signals" (break, ring, parity error, framing error, overrun). The bits of "irregular signals" are set, if this error/event occurred on the device side and are immeadeatly unset, if the serial state notification was sent. Like other drivers of real serial ports do, just the occurence of those events should be counted in serial_icounter_struct (but no 1->0 transitions). Signed-off-by: Tobias Herzog <t-herzog@gmx.de> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in ↵Sebastian Andrzej Siewior2018-10-10
| | | | | | | | | | | | | | | | | | service_outstanding_interrupt()" commit e871db8d78df1c411032cbb3acfdf8930509360e upstream. This reverts commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427. The bug the patch describes to, has been already fixed in commit 2df6948428542 ("USB: cdc-wdm: don't enable interrupts in USB-giveback") so need to this, revert it. Fixes: 6e22e3af7bb3 ("usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()") Cc: stable <stable@vger.kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc-wdm: Fix a sleep-in-atomic-context bug in ↵Jia-Ju Bai2018-09-26
| | | | | | | | | | | | | | | | | | | service_outstanding_interrupt() commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427 upstream. wdm_in_callback() is a completion handler function for the USB driver. So it should not sleep. But it calls service_outstanding_interrupt(), which calls usb_submit_urb() with GFP_KERNEL. To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc_acm: Add quirk for Castles VEGA3000Lubomir Rintel2018-07-28
| | | | | | | | | | | | | commit 1445cbe476fc3dd09c0b380b206526a49403c071 upstream. The device (a POS terminal) implements CDC ACM, but has not union descriptor. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc_acm: Add quirk for Uniden UBC125 scannerHouston Yaroschoff2018-07-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4a762569a2722b8a48066c7bacf0e1dc67d17fa1 upstream. Uniden UBC125 radio scanner has USB interface which fails to work with cdc_acm driver: usb 1-1.5: new full-speed USB device number 4 using xhci_hcd cdc_acm 1-1.5:1.0: Zero length descriptor references cdc_acm: probe of 1-1.5:1.0 failed with error -22 Adding the NO_UNION_NORMAL quirk for the device fixes the issue: usb 1-4: new full-speed USB device number 15 using xhci_hcd usb 1-4: New USB device found, idVendor=1965, idProduct=0018 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: UBC125XLT usb 1-4: Manufacturer: Uniden Corp. usb 1-4: SerialNumber: 0001 cdc_acm 1-4:1.0: ttyACM0: USB ACM device `lsusb -v` of the device: Bus 001 Device 015: ID 1965:0018 Uniden Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1965 Uniden Corporation idProduct 0x0018 bcdDevice 0.01 iManufacturer 1 Uniden Corp. iProduct 2 UBC125XLT iSerial 3 0001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 48 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 None iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Signed-off-by: Houston Yaroschoff <hstn@4ever3.net> Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* CDC-ACM: apply quirk for card readerOliver Neukum2018-02-03
| | | | | | | | | | | commit df1cc78a52491f71d8170d513d0f6f114faa1bda upstream. This devices drops random bytes from messages if you talk to it too fast. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: Do not log urb submission errors on disconnectHans de Goede2018-02-03
| | | | | | | | | | | | | | | | | | | | | commit f0386c083c2ce85284dc0b419d7b89c8e567c09f upstream. When disconnected sometimes the cdc-acm driver logs errors like these: [20278.039417] cdc_acm 2-2:2.1: urb 9 failed submission with -19 [20278.042924] cdc_acm 2-2:2.1: urb 10 failed submission with -19 [20278.046449] cdc_acm 2-2:2.1: urb 11 failed submission with -19 [20278.049920] cdc_acm 2-2:2.1: urb 12 failed submission with -19 [20278.053442] cdc_acm 2-2:2.1: urb 13 failed submission with -19 [20278.056915] cdc_acm 2-2:2.1: urb 14 failed submission with -19 [20278.060418] cdc_acm 2-2:2.1: urb 15 failed submission with -19 Silence these by not logging errors when the result is -ENODEV. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc_acm: Add quirk for Elatec TWN3Maksim Salau2017-10-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 765fb2f181cad669f2beb87842a05d8071f2be85 upstream. Elatec TWN3 has the union descriptor on data interface. This results in failure to bind the device to the driver with the following log: usb 1-1.2: new full speed USB device using streamplug-ehci and address 4 usb 1-1.2: New USB device found, idVendor=09d8, idProduct=0320 usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2: Product: RFID Device (COM) usb 1-1.2: Manufacturer: OEM cdc_acm 1-1.2:1.0: Zero length descriptor references cdc_acm: probe of 1-1.2:1.0 failed with error -22 Adding the NO_UNION_NORMAL quirk for the device fixes the issue. `lsusb -v` of the device: Bus 001 Device 003: ID 09d8:0320 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 32 idVendor 0x09d8 idProduct 0x0320 bcdDevice 3.00 iManufacturer 1 OEM iProduct 2 RFID Device (COM) iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 67 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 250mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 CDC Header: bcdCDC 1.10 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC ACM: bmCapabilities 0x06 sends break line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 Device Status: 0x0000 (Bus Powered) Signed-off-by: Maksim Salau <msalau@iotecha.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: add device-id for quirky printerJohan Hovold2017-07-27
| | | | | | | | | | | | | commit fe855789d605590e57f9cd968d85ecce46f5c3fd upstream. Add device-id entry for DATECS FP-2000 fiscal printer needing the NO_UNION_NORMAL quirk. Reported-by: Anton Avramov <lukav@lukav.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-acm: fix possible invalid access when processing notificationTobias Herzog2017-05-25
| | | | | | | | | | | | | | commit 1bb9914e1730417d530de9ed37e59efdc647146b upstream. Notifications may only be 8 bytes long. Accessing the 9th and 10th byte of unimplemented/unknown notifications may be insecure. Also check the length of known notifications before accessing anything behind the 8th byte. Signed-off-by: Tobias Herzog <t-herzog@gmx.de> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usbtmc: add missing endpoint sanity checkJohan Hovold2017-03-30
| | | | | | | | | | | | | | | | | | | | | | | | commit 687e0687f71ec00e0132a21fef802dee88c2f1ad upstream. USBTMC devices are required to have a bulk-in and a bulk-out endpoint, but the driver failed to verify this, something which could lead to the endpoint addresses being taken from uninitialised memory. Make sure to zero all private data as part of allocation, and add the missing endpoint sanity check. Note that this also addresses a more recently introduced issue, where the interrupt-in-presence flag would also be uninitialised whenever the optional interrupt-in endpoint is not present. This in turn could lead to an interrupt urb being allocated, initialised and submitted based on uninitialised values. Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.") Fixes: 5b775f672cc9 ("USB: add USB test and measurement class driver") Signed-off-by: Johan Hovold <johan@kernel.org> [ johan: backport to v4.4 ] Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: add device id for GW Instek AFG-125Nathaniel Quillin2017-01-06
| | | | | | | | | | | | commit 301216044e4c27d5a7323c1fa766266fad00db5e upstream. Add device-id entry for GW Instek AFG-125, which has a byte swapped bInterfaceSubClass (0x20). Signed-off-by: Nathaniel Quillin <ndq@google.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: fix TIOCMIWAITJohan Hovold2016-11-18
| | | | | | | | | | | | | | | | | commit 18266403f3fe507f0246faa1d5432333a2f139ca upstream. The TIOCMIWAIT implementation would return -EINVAL if any of the three supported signals were included in the mask. Instead of returning an error in case TIOCM_CTS is included, simply drop the mask check completely, which is in accordance with how other drivers implement this ioctl. Fixes: 5a6a62bdb925 ("cdc-acm: add TIOCMIWAIT") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "usbtmc: convert to devm_kzalloc"Greg Kroah-Hartman2016-10-07
| | | | | | | | | | | | | | | | | | commit ab21b63e8aedfc73565dd9cdd51eb338341177cb upstream. This reverts commit e6c7efdcb76f11b04e3d3f71c8d764ab75c9423b. Turns out it was totally wrong. The memory is supposed to be bound to the kref, as the original code was doing correctly, not the device/driver binding as the devm_kzalloc() would cause. This fixes an oops when read would be called after the device was unbound from the driver. Reported-by: Ladislav Michl <ladis@linux-mips.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-acm: fix wrong pipe type on rx interrupt xfersGavin Li2016-09-07
| | | | | | | | | | | commit add125054b8727103631dce116361668436ef6a7 upstream. This fixes the "BOGUS urb xfer" warning logged by usb_submit_urb(). Signed-off-by: Gavin Li <git@thegavinli.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: more sanity checkingOliver Neukum2016-04-12
| | | | | | | | | | | | | commit 8835ba4a39cf53f705417b3b3a94eb067673f2c9 upstream. An attack has become available which pretends to be a quirky device circumventing normal sanity checks and crashes the kernel by an insufficient number of interfaces. This patch adds a check to the code path for quirky devices. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-acm:exclude Samsung phone 04e8:685dOliver Neukum2016-03-03
| | | | | | | | | | | commit e912e685f372ab62a2405a1acd923597f524e94a upstream. This phone needs to be handled by a specialised firmware tool and is reported to crash irrevocably if cdc-acm takes it. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc-acm: send zero packet for intel 7260 modemLu Baolu2016-02-17
| | | | | | | | | | | | | | commit ffdb1e369a73b380fce95b05f8498d92c43842b4 upstream. For Intel 7260 modem, it is needed for host side to send zero packet if the BULK OUT size is equal to USB endpoint max packet length. Otherwise, modem side may still wait for more data and cannot give response to host side. Signed-off-by: Konrad Leszczynski <konrad.leszczynski@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc-acm: handle unlinked urb in acm read callbackLu Baolu2016-02-17
| | | | | | | | | | | | | | | | | | | | | commit 19454462acb1bdef80542061bdc9b410e4ed1ff6 upstream. In current acm driver, the bulk-in callback function ignores the URBs unlinked in usb core. This causes unexpected data loss in some cases. For example, runtime suspend entry will unlinked all urbs and set urb->status to -ENOENT even those urbs might have data not processed yet. Hence, data loss occurs. This patch lets bulk-in callback function handle unlinked urbs to avoid data loss. Signed-off-by: Tang Jian Qiang <jianqiang.tang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc_acm: Ignore Infineon Flash Loader utilityJonas Jonsson2015-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some modems, such as the Telit UE910, are using an Infineon Flash Loader utility. It has two interfaces, 2/2/0 (Abstract Modem) and 10/0/0 (CDC Data). The latter can be used as a serial interface to upgrade the firmware of the modem. However, that isn't possible when the cdc-acm driver takes control of the device. The following is an explanation of the behaviour by Daniele Palmas during discussion on linux-usb. "This is what happens when the device is turned on (without modifying the drivers): [155492.352031] usb 1-3: new high-speed USB device number 27 using ehci-pci [155492.485429] usb 1-3: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11 [155492.485436] usb 1-3: New USB device found, idVendor=058b, idProduct=0041 [155492.485439] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [155492.485952] cdc_acm 1-3:1.0: ttyACM0: USB ACM device This is the flashing device that is caught by the cdc-acm driver. Once the ttyACM appears, the application starts sending a magic string (simple write on the file descriptor) to keep the device in flashing mode. If this magic string is not properly received in a certain time interval, the modem goes on in normal operative mode: [155493.748094] usb 1-3: USB disconnect, device number 27 [155494.916025] usb 1-3: new high-speed USB device number 28 using ehci-pci [155495.059978] usb 1-3: New USB device found, idVendor=1bc7, idProduct=0021 [155495.059983] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [155495.059986] usb 1-3: Product: 6 CDC-ACM + 1 CDC-ECM [155495.059989] usb 1-3: Manufacturer: Telit [155495.059992] usb 1-3: SerialNumber: 359658044004697 [155495.138958] cdc_acm 1-3:1.0: ttyACM0: USB ACM device [155495.140832] cdc_acm 1-3:1.2: ttyACM1: USB ACM device [155495.142827] cdc_acm 1-3:1.4: ttyACM2: USB ACM device [155495.144462] cdc_acm 1-3:1.6: ttyACM3: USB ACM device [155495.145967] cdc_acm 1-3:1.8: ttyACM4: USB ACM device [155495.147588] cdc_acm 1-3:1.10: ttyACM5: USB ACM device [155495.154322] cdc_ether 1-3:1.12 wwan0: register 'cdc_ether' at usb-0000:00:1a.7-3, Mobile Broadband Network Device, 00:00:11:12:13:14 Using the cdc-acm driver, the string, though being sent in the same way than using the usb-serial-simple driver (I can confirm that the data is passing properly since I used an hw usb sniffer), does not make the device to stay in flashing mode." Signed-off-by: Jonas Jonsson <jonas@ludd.ltu.se> Tested-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* usblp: do not set TASK_INTERRUPTIBLE before lockJiri Slaby2015-11-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is not permitted to set task state before lock. usblp_wwait sets the state to TASK_INTERRUPTIBLE and calls mutex_lock_interruptible. Upon return from that function, the state will be TASK_RUNNING again. This is clearly a bug and a warning is generated with LOCKDEP too: WARNING: CPU: 1 PID: 5109 at kernel/sched/core.c:7404 __might_sleep+0x7d/0x90() do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffffa0c588d0>] usblp_wwait+0xa0/0x310 [usblp] Modules linked in: ... CPU: 1 PID: 5109 Comm: captmon Tainted: G W 4.2.5-0.gef2823b-default #1 Hardware name: LENOVO 23252SG/23252SG, BIOS G2ET33WW (1.13 ) 07/24/2012 ffffffff81a4edce ffff880236ec7ba8 ffffffff81716651 0000000000000000 ffff880236ec7bf8 ffff880236ec7be8 ffffffff8106e146 0000000000000282 ffffffff81a50119 000000000000028b 0000000000000000 ffff8802dab7c508 Call Trace: ... [<ffffffff8106e1c6>] warn_slowpath_fmt+0x46/0x50 [<ffffffff8109a8bd>] __might_sleep+0x7d/0x90 [<ffffffff8171b20f>] mutex_lock_interruptible_nested+0x2f/0x4b0 [<ffffffffa0c588fc>] usblp_wwait+0xcc/0x310 [usblp] [<ffffffffa0c58bb2>] usblp_write+0x72/0x350 [usblp] [<ffffffff8121ed98>] __vfs_write+0x28/0xf0 ... Commit 7f477358e2384c54b190cc3b6ce28277050a041b (usblp: Implement the ENOSPC convention) moved the set prior locking. So move it back after the lock. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Fixes: 7f477358e2 ("usblp: Implement the ENOSPC convention") Acked-By: Pete Zaitcev <zaitcev@yahoo.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 4.2-rc4 into usb-nextGreg Kroah-Hartman2015-07-27
|\ | | | | | | | | | | | | We want the USB fixes that went into that release in this branch as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-12-13 12:08:29 +0000