summaryrefslogtreecommitdiff
path: root/drivers/scsi/megaraid (follow)
Commit message (Collapse)AuthorAge
* scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()Harshvardhan Jha2021-08-26
| | | | | | | | | | | | | | | [ Upstream commit 77541f78eadfe9fdb018a7b8b69f0f2af2cf4b82 ] The list_for_each_entry() iterator, "adapter" in this code, can never be NULL. If we exit the loop without finding the correct adapter then "adapter" points invalid memory that is an offset from the list head. This will eventually lead to memory corruption and presumably a kernel crash. Link: https://lore.kernel.org/r/20210708074642.23599-1-harshvardhan.jha@oracle.com Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: megaraid_sas: reduce module load timeSteve Sistare2020-01-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 31b6a05f86e690e1818116fd23c3be915cc9d9ed ] megaraid_sas takes 1+ seconds to load while waiting for firmware: [2.822603] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state [3.871003] megaraid_sas 0000:03:00.0: FW now in Ready state This is due to the following loop in megasas_transition_to_ready(), which waits a minimum of 1 second, even though the FW becomes ready in tens of millisecs: /* * The cur_state should not last for more than max_wait secs */ for (i = 0; i < max_wait; i++) { ... msleep(1000); ... dev_info(&instance->pdev->dev, "FW now in Ready state\n"); This is a regression, caused by a change of the msleep granularity from 1 to 1000 due to concern about waiting too long on systems with coarse jiffies. To fix, increase iterations and use msleep(20), which results in: [2.670627] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state [2.739386] megaraid_sas 0000:03:00.0: FW now in Ready state Fixes: fb2f3e96d80f ("scsi: megaraid_sas: Fix msleep granularity") Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: megaraid_sas: Fix msleep granularityShivasharan S2019-11-28
| | | | | | | | | | | | | | | | [ Upstream commit 9155cf30a3c4ef97e225d6daddf9bd4b173267e8 ] In megasas_transition_to_ready() driver waits 180seconds for controller to change FW state. Here we are calling msleep(1) in a loop for this. As explained in timers-howto.txt, msleep(1) will actually sleep longer than 1ms. If a faulty controller is connected, we will end up waiting for much more than 180 seconds causing unnecessary delays during load. Change the granularity of msleep() call from 1ms to 1000ms. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: megaraid_sas: fix panic on loading firmware crashdumpJunxiao Bi2019-08-25
| | | | | | | | | | | | | [ Upstream commit 3b5f307ef3cb5022bfe3c8ca5b8f2114d5bf6c29 ] While loading fw crashdump in function fw_crash_buffer_show(), left bytes in one dma chunk was not checked, if copying size over it, overflow access will cause kernel panic. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: megaraid_sas: return error when create DMA pool failedJason Yan2019-04-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit bcf3b67d16a4c8ffae0aa79de5853435e683945c ] when create DMA pool for cmd frames failed, we should return -ENOMEM, instead of 0. In some case in: megasas_init_adapter_fusion() -->megasas_alloc_cmds() -->megasas_create_frame_pool create DMA pool failed, --> megasas_free_cmds() [1] -->megasas_alloc_cmds_fusion() failed, then goto fail_alloc_cmds. -->megasas_free_cmds() [2] we will call megasas_free_cmds twice, [1] will kfree cmd_list, [2] will use cmd_list.it will cause a problem: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ffffffc000f70000 [00000000] *pgd=0000001fbf893003, *pud=0000001fbf893003, *pmd=0000001fbf894003, *pte=006000006d000707 Internal error: Oops: 96000005 [#1] SMP Modules linked in: CPU: 18 PID: 1 Comm: swapper/0 Not tainted task: ffffffdfb9290000 ti: ffffffdfb923c000 task.ti: ffffffdfb923c000 PC is at megasas_free_cmds+0x30/0x70 LR is at megasas_free_cmds+0x24/0x70 ... Call trace: [<ffffffc0005b779c>] megasas_free_cmds+0x30/0x70 [<ffffffc0005bca74>] megasas_init_adapter_fusion+0x2f4/0x4d8 [<ffffffc0005b926c>] megasas_init_fw+0x2dc/0x760 [<ffffffc0005b9ab0>] megasas_probe_one+0x3c0/0xcd8 [<ffffffc0004a5abc>] local_pci_probe+0x4c/0xb4 [<ffffffc0004a5c40>] pci_device_probe+0x11c/0x14c [<ffffffc00053a5e4>] driver_probe_device+0x1ec/0x430 [<ffffffc00053a92c>] __driver_attach+0xa8/0xb0 [<ffffffc000538178>] bus_for_each_dev+0x74/0xc8 [<ffffffc000539e88>] driver_attach+0x28/0x34 [<ffffffc000539a18>] bus_add_driver+0x16c/0x248 [<ffffffc00053b234>] driver_register+0x6c/0x138 [<ffffffc0004a5350>] __pci_register_driver+0x5c/0x6c [<ffffffc000ce3868>] megasas_init+0xc0/0x1a8 [<ffffffc000082a58>] do_one_initcall+0xe8/0x1ec [<ffffffc000ca7be8>] kernel_init_freeable+0x1c8/0x284 [<ffffffc0008d90b8>] kernel_init+0x1c/0xe4 Signed-off-by: Jason Yan <yanaijie@huawei.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: megaraid: fix out-of-bound array accessesQian Cai2019-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c7a082e4242fd8cd21a441071e622f87c16bdacc ] UBSAN reported those with MegaRAID SAS-3 3108, [ 77.467308] UBSAN: Undefined behaviour in drivers/scsi/megaraid/megaraid_sas_fp.c:117:32 [ 77.475402] index 255 is out of range for type 'MR_LD_SPAN_MAP [1]' [ 77.481677] CPU: 16 PID: 333 Comm: kworker/16:1 Not tainted 4.20.0-rc5+ #1 [ 77.488556] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.50 06/01/2018 [ 77.495791] Workqueue: events work_for_cpu_fn [ 77.500154] Call trace: [ 77.502610] dump_backtrace+0x0/0x2c8 [ 77.506279] show_stack+0x24/0x30 [ 77.509604] dump_stack+0x118/0x19c [ 77.513098] ubsan_epilogue+0x14/0x60 [ 77.516765] __ubsan_handle_out_of_bounds+0xfc/0x13c [ 77.521767] mr_update_load_balance_params+0x150/0x158 [megaraid_sas] [ 77.528230] MR_ValidateMapInfo+0x2cc/0x10d0 [megaraid_sas] [ 77.533825] megasas_get_map_info+0x244/0x2f0 [megaraid_sas] [ 77.539505] megasas_init_adapter_fusion+0x9b0/0xf48 [megaraid_sas] [ 77.545794] megasas_init_fw+0x1ab4/0x3518 [megaraid_sas] [ 77.551212] megasas_probe_one+0x2c4/0xbe0 [megaraid_sas] [ 77.556614] local_pci_probe+0x7c/0xf0 [ 77.560365] work_for_cpu_fn+0x34/0x50 [ 77.564118] process_one_work+0x61c/0xf08 [ 77.568129] worker_thread+0x534/0xa70 [ 77.571882] kthread+0x1c8/0x1d0 [ 77.575114] ret_from_fork+0x10/0x1c [ 89.240332] UBSAN: Undefined behaviour in drivers/scsi/megaraid/megaraid_sas_fp.c:117:32 [ 89.248426] index 255 is out of range for type 'MR_LD_SPAN_MAP [1]' [ 89.254700] CPU: 16 PID: 95 Comm: kworker/u130:0 Not tainted 4.20.0-rc5+ #1 [ 89.261665] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.50 06/01/2018 [ 89.268903] Workqueue: events_unbound async_run_entry_fn [ 89.274222] Call trace: [ 89.276680] dump_backtrace+0x0/0x2c8 [ 89.280348] show_stack+0x24/0x30 [ 89.283671] dump_stack+0x118/0x19c [ 89.287167] ubsan_epilogue+0x14/0x60 [ 89.290835] __ubsan_handle_out_of_bounds+0xfc/0x13c [ 89.295828] MR_LdRaidGet+0x50/0x58 [megaraid_sas] [ 89.300638] megasas_build_io_fusion+0xbb8/0xd90 [megaraid_sas] [ 89.306576] megasas_build_and_issue_cmd_fusion+0x138/0x460 [megaraid_sas] [ 89.313468] megasas_queue_command+0x398/0x3d0 [megaraid_sas] [ 89.319222] scsi_dispatch_cmd+0x1dc/0x8a8 [ 89.323321] scsi_request_fn+0x8e8/0xdd0 [ 89.327249] __blk_run_queue+0xc4/0x158 [ 89.331090] blk_execute_rq_nowait+0xf4/0x158 [ 89.335449] blk_execute_rq+0xdc/0x158 [ 89.339202] __scsi_execute+0x130/0x258 [ 89.343041] scsi_probe_and_add_lun+0x2fc/0x1488 [ 89.347661] __scsi_scan_target+0x1cc/0x8c8 [ 89.351848] scsi_scan_channel.part.3+0x8c/0xc0 [ 89.356382] scsi_scan_host_selected+0x130/0x1f0 [ 89.361002] do_scsi_scan_host+0xd8/0xf0 [ 89.364927] do_scan_async+0x9c/0x320 [ 89.368594] async_run_entry_fn+0x138/0x420 [ 89.372780] process_one_work+0x61c/0xf08 [ 89.376793] worker_thread+0x13c/0xa70 [ 89.380546] kthread+0x1c8/0x1d0 [ 89.383778] ret_from_fork+0x10/0x1c This is because when populating Driver Map using firmware raid map, all non-existing VDs set their ldTgtIdToLd to 0xff, so it can be skipped later. From drivers/scsi/megaraid/megaraid_sas_base.c , memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS); From drivers/scsi/megaraid/megaraid_sas_fp.c , /* For non existing VDs, iterate to next VD*/ if (ld >= (MAX_LOGICAL_DRIVES_EXT - 1)) continue; However, there are a few places that failed to skip those non-existing VDs due to off-by-one errors. Then, those 0xff leaked into MR_LdRaidGet(0xff, map) and triggered the out-of-bound accesses. Fixes: 51087a8617fe ("megaraid_sas : Extended VD support") Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: megaraid_sas: fix a missing-check bugWenwen Wang2018-11-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 47db7873136a9c57c45390a53b57019cf73c8259 ] In megasas_mgmt_compat_ioctl_fw(), to handle the structure compat_megasas_iocpacket 'cioc', a user-space structure megasas_iocpacket 'ioc' is allocated before megasas_mgmt_ioctl_fw() is invoked to handle the packet. Since the two data structures have different fields, the data is copied from 'cioc' to 'ioc' field by field. In the copy process, 'sense_ptr' is prepared if the field 'sense_len' is not null, because it will be used in megasas_mgmt_ioctl_fw(). To prepare 'sense_ptr', the user-space data 'ioc->sense_off' and 'cioc->sense_off' are copied and saved to kernel-space variables 'local_sense_off' and 'user_sense_off' respectively. Given that 'ioc->sense_off' is also copied from 'cioc->sense_off', 'local_sense_off' and 'user_sense_off' should have the same value. However, 'cioc' is in the user space and a malicious user can race to change the value of 'cioc->sense_off' after it is copied to 'ioc->sense_off' but before it is copied to 'user_sense_off'. By doing so, the attacker can inject different values into 'local_sense_off' and 'user_sense_off'. This can cause undefined behavior in the following execution, because the two variables are supposed to be same. This patch enforces a check on the two kernel variables 'local_sense_off' and 'user_sense_off' to make sure they are the same after the copy. In case they are not, an error code EINVAL will be returned. Signed-off-by: Wenwen Wang <wang6495@umn.edu> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: megaraid_sas: Increase timeout by 1 sec for non-RAID fastpath IOsShivasharan S2018-08-06
| | | | | | | | | | | | | | | | | | | [ Upstream commit 3239b8cd28fd849a2023483257d35d68c5876c74 ] Hardware could time out Fastpath IOs one second earlier than the timeout provided by the host. For non-RAID devices, driver provides timeout value based on OS provided timeout value. Under certain scenarios, if the OS provides a timeout value of 1 second, due to above behavior hardware will timeout immediately. Increase timeout value for non-RAID fastpath IOs by 1 second. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: megaraid_sas: Return pended IOCTLs with cmd_status ↵Shivasharan S2017-09-27
| | | | | | | | | | | | | | | | | | MFI_STAT_WRONG_STATE in case adapter is dead commit eb3fe263a48b0d27b229c213929c4cb3b1b39a0f upstream. After a kill adapter, since the cmd_status is not set, the IOCTLs will be hung in driver resulting in application hang. Set cmd_status MFI_STAT_WRONG_STATE when completing pended IOCTLs. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: megaraid_sas: Check valid aen class range to avoid kernel panicShivasharan S2017-09-27
| | | | | | | | | | | | commit 91b3d9f0069c8307d0b3a4c6843b65a439183318 upstream. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: megaraid_sas: Do not set MPI2_TYPE_CUDA for JBOD FP path for FW which ↵Kashyap Desai2017-01-09
| | | | | | | | | | | | | does not support JBOD sequence map commit d5573584429254a14708cf8375c47092b5edaf2c upstream. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: megaraid_sas: For SRIOV enabled firmware, ensure VF driver waits for ↵Kashyap Desai2017-01-09
| | | | | | | | | | | | | | | | | | | | | | 30secs before reset commit 18e1c7f68a5814442abad849abe6eacbf02ffd7c upstream. For SRIOV enabled firmware, if there is a OCR(online controller reset) possibility driver set the convert flag to 1, which is not happening if there are outstanding commands even after 180 seconds. As driver does not set convert flag to 1 and still making the OCR to run, VF(Virtual function) driver is directly writing on to the register instead of waiting for 30 seconds. Setting convert flag to 1 will cause VF driver will wait for 30 secs before going for reset. Signed-off-by: Kiran Kumar Kasturi <kiran-kumar.kasturi@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regressionSumit Saxena2016-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 5e5ec1759dd663a1d5a2f10930224dd009e500e8 upstream. This patch will fix regression caused by commit 1e793f6fc0db ("scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices"). The problem was that the MEGASAS_IS_LOGICAL macro did not have braces and as a result the driver ended up exposing a lot of non-existing SCSI devices (all SCSI commands to channels 1,2,3 were returned as SUCCESS-DID_OK by driver). [mkp: clarified patch description] Fixes: 1e793f6fc0db920400574211c48f9157a37e3945 Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Tested-by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Tested-by: Jens Axboe <axboe@fb.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devicesKashyap Desai2016-11-10
| | | | | | | | | | | | | | | | | | | | | | | commit 1e793f6fc0db920400574211c48f9157a37e3945 upstream. Commit 02b01e010afe ("megaraid_sas: return sync cache call with success") modified the driver to successfully complete SYNCHRONIZE_CACHE commands without passing them to the controller. Disk drive caches are only explicitly managed by controller firmware when operating in RAID mode. So this commit effectively disabled writeback cache flushing for any drives used in JBOD mode, leading to data integrity failures. [mkp: clarified patch description] Fixes: 02b01e010afeeb49328d35650d70721d2ca3fd59 Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* megaraid: fix null pointer check in megasas_detach_one().Maurizio Lombardi2016-09-30
| | | | | | | | | | | | | | commit 546e559c79b1a8d27c23262907a00fc209e392a0 upstream. The pd_seq_sync pointer can't be NULL, we have to check its entries instead. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* megaraid_sas: Add an i/o barrierTomas Henzl2016-09-15
| | | | | | | | | | | | | | [ Upstream commit b99dbe56d511eb07de33bfa1b99ac5a6ff76ae08 ] A barrier should be added to ensure proper ordering of memory mapped writes. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com> Acked-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* megaraid_sas: Fix SMAP issueSumit Saxena2016-09-15
| | | | | | | | | | | | | | [ Upstream commit ea1c928bb6051ec4ccf24826898aa2361eaa71e5 ] Inside compat IOCTL hook of driver, driver was using wrong address of ioc->frame.raw which leads sense_ioc_ptr to be calculated wrongly and failing IOCTL. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* megaraid_sas: Do not allow PCI access during OCRSumit Saxena2016-09-15
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 11c71cb4ab7cd901b9d6f0ff267c102778c1c8ef ] This patch will do synhronization between OCR function and AEN function using "reset_mutex" lock. reset_mutex will be acquired only in the first half of the AEN function which issues a DCMD. Second half of the function which calls SCSI API (scsi_add_device/scsi_remove_device) should be out of reset_mutex to avoid deadlock between scsi_eh thread and driver. During chip reset (inside OCR function), there should not be any PCI access and AEN function (which is called in delayed context) may be firing DCMDs (doing PCI writes) when chip reset is happening in parallel which will cause FW fault. This patch will solve the problem by making AEN thread and OCR thread mutually exclusive. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* megaraid_sas: Fix probing cards without io portYinghai Lu2016-09-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e7f851684efb3377e9c93aca7fae6e76212e5680 upstream. Found one megaraid_sas HBA probe fails, [ 187.235190] scsi host2: Avago SAS based MegaRAID driver [ 191.112365] megaraid_sas 0000:89:00.0: BAR 0: can't reserve [io 0x0000-0x00ff] [ 191.120548] megaraid_sas 0000:89:00.0: IO memory region busy! and the card has resource like, [ 125.097714] pci 0000:89:00.0: [1000:005d] type 00 class 0x010400 [ 125.104446] pci 0000:89:00.0: reg 0x10: [io 0x0000-0x00ff] [ 125.110686] pci 0000:89:00.0: reg 0x14: [mem 0xce400000-0xce40ffff 64bit] [ 125.118286] pci 0000:89:00.0: reg 0x1c: [mem 0xce300000-0xce3fffff 64bit] [ 125.125891] pci 0000:89:00.0: reg 0x30: [mem 0xce200000-0xce2fffff pref] that does not io port resource allocated from BIOS, and kernel can not assign one as io port shortage. The driver is only looking for MEM, and should not fail. It turns out megasas_init_fw() etc are using bar index as mask. index 1 is used as mask 1, so that pci_request_selected_regions() is trying to request BAR0 instead of BAR1. Fix all related reference. Fixes: b6d5d8808b4c ("megaraid_sas: Use lowest memory bar for SR-IOV VF support") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* megaraid_sas: add missing curly braces in ioctl handlerArnd Bergmann2016-05-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3deb9438d34a09f6796639b652a01d110aca9f75 upstream. gcc-6 found a dubious indentation in the megasas_mgmt_fw_ioctl function: drivers/scsi/megaraid/megaraid_sas_base.c: In function 'megasas_mgmt_fw_ioctl': drivers/scsi/megaraid/megaraid_sas_base.c:6658:4: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] kbuff_arr[i] = NULL; ^~~~~~~~~ drivers/scsi/megaraid/megaraid_sas_base.c:6653:3: note: ...this 'if' clause, but it is not if (kbuff_arr[i]) ^~ The code is actually correct, as there is no downside in clearing a NULL pointer again. This clarifies the code and avoids the warning by adding extra curly braces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 90dc9d98f01b ("megaraid_sas : MFI MPT linked list corruption fix") Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag '4.4-scsi-mkp' into miscJames Bottomley2015-11-12
|\ | | | | | | | | | | SCSI queue for 4.4. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Fix sparse warningSumit Saxena2015-11-09
| | | | | | | | | | Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Make tape drives visible on PERC5 controllersSumit Saxena2015-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | The DELL PERC5 controller firmware does not list tape drives in response to MR_DCMD_PD_LIST_QUERY. This causes tape drives not be exposed to the OS when connected to a PERC5 controller. This patch permits detection of tape drives connected to a PERC5 controller by exposing non-TYPE_DISK devices unconditionally. Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas : Remove debug print from function megasas_update_span_setsumit.saxena@avagotech.com2015-11-02
| | | | | | | | | | | | Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas : Driver version upgradesumit.saxena@avagotech.com2015-11-02
| | | | | | | | | | | | Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas : SMAP restriction--do not access user memory from IOCTL codesumit.saxena@avagotech.com2015-11-02
| | | | | | | | | | | | | | | | | | | | | | | | This is an issue on SMAP enabled CPUs and 32 bit apps running on 64 bit OS. Do not access user memory from kernel code. The SMAP bit restricts accessing user memory from kernel code. Cc: <stable@vger.kernel.org> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Make PI enabled VD 8 byte DMA alignedsumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Initialize tasklet before setting up IRQssumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | | | | | | | | | | | It may happen (kdump), that an interrupt is invoked just after the setup_irqs function was called but before the tasklet was initialised. At this phase the hw ints should have been disabled, but for unknown reason this mechanism seems to not work properly. From: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Indicate online firmware upgrade support for Secure JBOD featuresumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Update OCR capability on controller properties changesumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | | | Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Do not use PAGE_SIZE for max_sectorssumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not use PAGE_SIZE marco to calculate max_sectors per I/O request. Driver code assumes PAGE_SIZE will be always 4096 which can lead to wrongly calculated value if PAGE_SIZE is not 4096. This issue was reported in Ubuntu Bugzilla Bug #1475166. Cc: <stable@vger.kernel.org> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Support for Cutlass (12 Gbps) controllersumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | | | Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Support for Intruder (12 Gbps) controllersumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | | | Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Remove PCI id checkssumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | Remove PCI id based checks and use instance->ctrl_context to decide whether controller is MFI-based or a Fusion adapter. Additionally, Fusion adapters are divided into two categories: Thunderbolt and Invader. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Expose TAPE drives unconditionallysumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | | | | | | | | | Expose non-disk (TAPE drive, CD-ROM) unconditionally. Cc: <stable@vger.kernel.org> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Version updatesumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Code refactor for use of requestorIdsumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | Some of these code changes were proposed by David Binderman. Removed redudant check of requestorId. Redundant condition: instance.requestorId. Check for plasma firmware 1.11 are now restructured to support only specific device id. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Fix validHandles check in I/O pathsumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | | | | | | | | | Syncro firmware supports round robin I/O switching on dual path. Driver uses validHandles to check for dual path. However, it is supposed to check for values > 1 (not > 2). Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Print critical firmware event messagessumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Print firmware events in human-readable form. This will help users track any critical firmware events without special application support. Sample syslogd output: megaraid_sas 0000:02:00.0: 8619 (491648347s/0x0020/WARN) - Controller temperature threshold exceeded. This may indicate inadequate system cooling. Switching to low performance mode. The format of logged events is: "<pci_dev_id>: <sequence_number> (<timestamp>/<locale>/<class>) - <description>" Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Chip reset if driver fails to get IOC readysumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the issue reported at: http://marc.info/?l=linux-scsi&m=143694494104544&w=2 Try to do chip reset at driver load time. If firmware fails to reach ready state, try chip reset using adp_reset() callback. For Fusion adapters the call back was previously void. Provide a suitable reset function. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Support for max_io_size 1MBsumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | | | | | | | Driver will expose max sge = 256 (earlier it was 64) if firmware supports extended IO size (1M). Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Code cleanup-use local variable drv_ops inside ↵sumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | | | | | megasas_ioc_init_fusion Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: JBOD sequence number supportsumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Increase timeout to 60 secs for abort frames during shutdownsumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * megaraid_sas: Synchronize driver headers with firmware APIssumit.saxena@avagotech.com2015-10-29
| | | | | | | | | | | | | | Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | scsi: use host wide tags by defaultChristoph Hellwig2015-11-09
|/ | | | | | | | | | | | | This patch changes the !blk-mq path to the same defaults as the blk-mq I/O path by always enabling block tagging, and always using host wide tags. We've had blk-mq available for a few releases so bugs with this mode should have been ironed out, and this ensures we get better coverage of over tagging setup over different configs. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* megaraid_sas: fix whitespace errorsBjorn Helgaas2015-08-26
| | | | | | | | | | Fix whitespace and indentation errors. No code change. [jejb: checkpatch fixes] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* megaraid_sas: use dev_printk when possibleBjorn Helgaas2015-08-26
| | | | | | | | | Use dev_printk() when possible to make messages more useful. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2015-06-23
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "This is the usual grab bag of driver updates (lpfc, hpsa, megaraid_sas, cxgbi, be2iscsi) plus an assortment of minor updates. There is also one new driver: the Cisco snic. The advansys driver has been rewritten to get rid of the warning about converting it to the DMA API, the tape statistics patch got in and finally, there's a resuffle of SCSI header files to separate more cleanly initiator from target mode (and better share the common definitions)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (156 commits) snic: driver for Cisco SCSI HBA qla2xxx: Fix indentation qla2xxx: Comment out unreachable code fusion: remove dead MTRR code advansys: fix compilation errors and warnings when CONFIG_PCI is not set mptsas: fix depth param in scsi_track_queue_full megaraid: fix irq setup process regression lpfc: Update version to 10.7.0.0 for upstream patch set. lpfc: Fix to drop PLOGIs from fabric node till LOGO processing completes lpfc: Fix scsi task management error message. lpfc: Fix cq_id masking problem. lpfc: Fix scsi prep dma buf error. lpfc: Add support for using block multi-queue lpfc: Devices are not discovered during takeaway/giveback testing lpfc: Fix vport deletion failure. lpfc: Check for active portpeerbeacon. lpfc: Update driver version for upstream patch set 10.6.0.1. lpfc: Change buffer pool empty message to miscellaneous category lpfc: Fix incorrect log message reported for empty FCF record. lpfc: Fix rport leak. ...
| * megaraid: fix irq setup process regressionTomas Henzl2015-06-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a regression caused by commit d3557fc8be11d25f316884581f487684f8e7dad3 megaraid_sas : Add separate function for setting up IRQs This makes boot end with 'root does not exist' message on certain adapters. The bug is that the driver does not setup ints for cards without msi-x support. This patch fixes it, in addition to that it moves tasklet initialisation before enable_intr, otherwise a kernel panic may occur, when an interrupt arrives before the tasklet is ready. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-21 19:29:59 +0000