summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/freescale (follow)
Commit message (Collapse)AuthorAge
* net/fsl: xgmac_mdio: Fix incorrect iounmap when removing moduleTobias Waldekranz2022-01-27
| | | | | | | | | | | | | | commit 3f7c239c7844d2044ed399399d97a5f1c6008e1b upstream. As reported by sparse: In the remove path, the driver would attempt to unmap its own priv pointer - instead of the io memory that it mapped in probe. Fixes: 9f35a7342cff ("net/fsl: introduce Freescale 10G MDIO driver") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: fec: only clear interrupt of handling queue in fec_enet_rx_queue()Joakim Zhang2021-12-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b5bd95d17102b6719e3531d627875b9690371383 upstream. Background: We have a customer is running a Profinet stack on the 8MM which receives and responds PNIO packets every 4ms and PNIO-CM packets every 40ms. However, from time to time the received PNIO-CM package is "stock" and is only handled when receiving a new PNIO-CM or DCERPC-Ping packet (tcpdump shows the PNIO-CM and the DCERPC-Ping packet at the same time but the PNIO-CM HW timestamp is from the expected 40 ms and not the 2s delay of the DCERPC-Ping). After debugging, we noticed PNIO, PNIO-CM and DCERPC-Ping packets would be handled by different RX queues. The root cause should be driver ack all queues' interrupt when handle a specific queue in fec_enet_rx_queue(). The blamed patch is introduced to receive as much packets as possible once to avoid interrupt flooding. But it's unreasonable to clear other queues'interrupt when handling one queue, this patch tries to fix it. Fixes: ed63f1dcd578 (net: fec: clear receive interrupts before processing a packet) Cc: Russell King <rmk+kernel@arm.linux.org.uk> Reported-by: Nicolas Diaz <nicolas.diaz@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20211206135457.15946-1-qiangqing.zhang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: fec_ptp: add clock rate zero checkFugang Duan2021-06-30
| | | | | | | | | | | | commit cb3cefe3f3f8af27c6076ef7d1f00350f502055d upstream. Add clock rate zero check to fix coverity issue of "divide by 0". Fixes: commit 85bd1798b24a ("net: fec: fix spin_lock dead lock") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gianfar: Handle error code at MAC address changeClaudiu Manoil2021-04-16
| | | | | | | | | | | [ Upstream commit bff5b62585123823842833ab20b1c0a7fa437f8c ] Handle return error code of eth_mac_addr(); Fixes: 3d23a05c75c7 ("gianfar: Enable changing mac addr when if up") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: fec: ptp: avoid register access when ipg clock is disabledHeiko Thiery2021-03-30
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6a4d7234ae9a3bb31181f348ade9bbdb55aeb5c5 ] When accessing the timecounter register on an i.MX8MQ the kernel hangs. This is only the case when the interface is down. This can be reproduced by reading with 'phc_ctrl eth0 get'. Like described in the change in 91c0d987a9788dcc5fe26baafd73bf9242b68900 the igp clock is disabled when the interface is down and leads to a system hang. So we check if the ptp clock status before reading the timecounter register. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20210225211514.9115-1-heiko.thiery@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: ethernet: fs_enet: Add missing MODULE_LICENSEMichael Ellerman2021-01-23
| | | | | | | | | | | | | | | | | | [ Upstream commit 445c6198fe7be03b7d38e66fe8d4b3187bc251d4 ] Since commit 1d6cd3929360 ("modpost: turn missing MODULE_LICENSE() into error") the ppc32_allmodconfig build fails with: ERROR: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/freescale/fs_enet/mii-fec.o ERROR: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/freescale/fs_enet/mii-bitbang.o Add the missing MODULE_LICENSEs to fix the build. Both files include a copyright header indicating they are GPL v2. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ethernet: ucc_geth: fix definition and size of ucc_geth_tx_global_pramRasmus Villemoes2021-01-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 887078de2a23689e29d6fa1b75d7cbc544c280be ] Table 8-53 in the QUICC Engine Reference manual shows definitions of fields up to a size of 192 bytes, not just 128. But in table 8-111, one does find the text Base Address of the Global Transmitter Parameter RAM Page. [...] The user needs to allocate 128 bytes for this page. The address must be aligned to the page size. I've checked both rev. 7 (11/2015) and rev. 9 (05/2018) of the manual; they both have this inconsistency (and the table numbers are the same). Adding a bit of debug printing, on my board the struct ucc_geth_tx_global_pram is allocated at offset 0x880, while the (opaque) ucc_geth_thread_data_tx gets allocated immediately afterwards, at 0x900. So whatever the engine writes into the thread data overlaps with the tail of the global tx pram (and devmem says that something does get written during a simple ping). I haven't observed any failure that could be attributed to this, but it seems to be the kind of thing that would be extremely hard to debug. So extend the struct definition so that we do allocate 192 bytes. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ethernet: ucc_geth: fix use-after-free in ucc_geth_remove()Rasmus Villemoes2021-01-12
| | | | | | | | | | | | | [ Upstream commit e925e0cd2a705aaacb0b907bb3691fcac3a973a4 ] ugeth is the netdiv_priv() part of the netdevice. Accessing the memory pointed to by ugeth (such as done by ucc_geth_memclean() and the two of_node_puts) after free_netdev() is thus use-after-free. Fixes: 80a9fad8e89a ("ucc_geth: fix module removal") Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gianfar: Account for Tx PTP timestamp in the skb headroomClaudiu Manoil2020-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d6a076d68c6b5d6a5800f3990a513facb7016dea ] When PTP timestamping is enabled on Tx, the controller inserts the Tx timestamp at the beginning of the frame buffer, between SFD and the L2 frame header. This means that the skb provided by the stack is required to have enough headroom otherwise a new skb needs to be created by the driver to accommodate the timestamp inserted by h/w. Up until now the driver was relying on the second option, using skb_realloc_headroom() to create a new skb to accommodate PTP frames. Turns out that this method is not reliable, as reallocation of skbs for PTP frames along with the required overhead (skb_set_owner_w, consume_skb) is causing random crashes in subsequent skb_*() calls, when multiple concurrent TCP streams are run at the same time on the same device (as seen in James' report). Note that these crashes don't occur with a single TCP stream, nor with multiple concurrent UDP streams, but only when multiple TCP streams are run concurrently with the PTP packet flow (doing skb reallocation). This patch enforces the first method, by requesting enough headroom from the stack to accommodate PTP frames, and so avoiding skb_realloc_headroom() & co, and the crashes no longer occur. There's no reason not to set needed_headroom to a large enough value to accommodate PTP frames, so in this regard this patch is a fix. Reported-by: James Jurack <james.jurack@ametek.com> Fixes: bee9e58c9e98 ("gianfar:don't add FCB length to hard_header_len") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201020173605.1173-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gianfar: Replace skb_realloc_headroom with skb_cow_head for PTPClaudiu Manoil2020-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d145c9031325fed963a887851d9fa42516efd52b ] When PTP timestamping is enabled on Tx, the controller inserts the Tx timestamp at the beginning of the frame buffer, between SFD and the L2 frame header. This means that the skb provided by the stack is required to have enough headroom otherwise a new skb needs to be created by the driver to accommodate the timestamp inserted by h/w. Up until now the driver was relying on skb_realloc_headroom() to create new skbs to accommodate PTP frames. Turns out that this method is not reliable in this context at least, as skb_realloc_headroom() for PTP frames can cause random crashes, mostly in subsequent skb_*() calls, when multiple concurrent TCP streams are run at the same time with the PTP flow on the same device (as seen in James' report). I also noticed that when the system is loaded by sending multiple TCP streams, the driver receives cloned skbs in large numbers. skb_cow_head() instead proves to be stable in this scenario, and not only handles cloned skbs too but it's also more efficient and widely used in other drivers. The commit introducing skb_realloc_headroom in the driver goes back to 2009, commit 93c1285c5d92 ("gianfar: reallocate skb when headroom is not enough for fcb"). For practical purposes I'm referencing a newer commit (from 2012) that brings the code to its current structure (and fixes the PTP case). Fixes: 9c4886e5e63b ("gianfar: Fix invalid TX frames returned on error queue when time stamping") Reported-by: James Jurack <james.jurack@ametek.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201029081057.8506-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: gianfar: Add of_node_put() before goto statementSumera Priyadarsini2020-09-03
| | | | | | | | | | | | | | | | | | | [ Upstream commit 989e4da042ca4a56bbaca9223d1a93639ad11e17 ] Every iteration of for_each_available_child_of_node() decrements reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak. Fix a potential memory leak in gianfar.c by inserting of_node_put() before the goto statement. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/ethernet/freescale: rework quiesce/activate for ucc_gethValentin Longchamp2020-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 79dde73cf9bcf1dd317a2667f78b758e9fe139ed ] ugeth_quiesce/activate are used to halt the controller when there is a link change that requires to reconfigure the mac. The previous implementation called netif_device_detach(). This however causes the initial activation of the netdevice to fail precisely because it's detached. For details, see [1]. A possible workaround was the revert of commit net: linkwatch: add check for netdevice being present to linkwatch_do_dev However, the check introduced in the above commit is correct and shall be kept. The netif_device_detach() is thus replaced with netif_tx_stop_all_queues() that prevents any tranmission. This allows to perform mac config change required by the link change, without detaching the corresponding netdevice and thus not preventing its initial activation. [1] https://lists.openwall.net/netdev/2020/01/08/201 Signed-off-by: Valentin Longchamp <valentin@longchamp.me> Acked-by: Matteo Ghidoni <matteo.ghidoni@ch.abb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: fec: validate the new settings in fec_enet_set_coalesce()Jakub Kicinski2020-03-20
| | | | | | | | | | | | | | | | | [ Upstream commit ab14961d10d02d20767612c78ce148f6eb85bd58 ] fec_enet_set_coalesce() validates the previously set params and if they are within range proceeds to apply the new ones. The new ones, however, are not validated. This seems backwards, probably a copy-paste error? Compile tested only. Fixes: d851b47b22fc ("net: fec: add interrupt coalescence feature support") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gianfar: Fix TX timestamping with a stacked DSA driverVladimir Oltean2020-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c26a2c2ddc0115eb088873f5c309cf46b982f522 ] The driver wrongly assumes that it is the only entity that can set the SKBTX_IN_PROGRESS bit of the current skb. Therefore, in the gfar_clean_tx_ring function, where the TX timestamp is collected if necessary, the aforementioned bit is used to discriminate whether or not the TX timestamp should be delivered to the socket's error queue. But a stacked driver such as a DSA switch can also set the SKBTX_IN_PROGRESS bit, which is actually exactly what it should do in order to denote that the hardware timestamping process is undergoing. Therefore, gianfar would misinterpret the "in progress" bit as being its own, and deliver a second skb clone in the socket's error queue, completely throwing off a PTP process which is not expecting to receive it, _even though_ TX timestamping is not enabled for gianfar. There have been discussions [0] as to whether non-MAC drivers need or not to set SKBTX_IN_PROGRESS at all (whose purpose is to avoid sending 2 timestamps, a sw and a hw one, to applications which only expect one). But as of this patch, there are at least 2 PTP drivers that would break in conjunction with gianfar: the sja1105 DSA switch and the felix switch, by way of its ocelot core driver. So regardless of that conclusion, fix the gianfar driver to not do stuff based on flags set by others and not intended for it. [0]: https://www.spinics.net/lists/netdev/msg619699.html Fixes: f0ee7acfcdd4 ("gianfar: Add hardware TX timestamping support") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/fsl: treat fsl,erratum-a011043Madalin Bucur2020-02-05
| | | | | | | | | | | | | | | | [ Upstream commit 1d3ca681b9d9575ccf696ebc2840a1ebb1fd4074 ] When fsl,erratum-a011043 is set, adjust for erratum A011043: MDIO reads to internal PCS registers may result in having the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and read data (MDIO_DATA[MDIO_DATA]) is correct. Software may get false read error when reading internal PCS registers through MDIO. As a workaround, all internal MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: fec: Do not use netdev messages too earlyFabio Estevam2019-08-04
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit a19a0582363b9a5f8ba812f34f1b8df394898780 ] When a valid MAC address is not found the current messages are shown: fec 2188000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00 fec 2188000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: aa:9f:25:eb:7e:aa Since the network device has not been registered at this point, it is better to use dev_err()/dev_info() instead, which will provide cleaner log messages like these: fec 2188000.ethernet: Invalid MAC address: 00:00:00:00:00:00 fec 2188000.ethernet: Using random MAC address: aa:9f:25:eb:7e:aa Tested on a imx6dl-pico-pi board. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: ucc_geth - fix Oops when changing number of buffers in the ringChristophe Leroy2019-05-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ee0df19305d9fabd9479b785918966f6e25b733b ] When changing the number of buffers in the RX ring while the interface is running, the following Oops is encountered due to the new number of buffers being taken into account immediately while their allocation is done when opening the device only. [ 69.882706] Unable to handle kernel paging request for data at address 0xf0000100 [ 69.890172] Faulting instruction address: 0xc033e164 [ 69.895122] Oops: Kernel access of bad area, sig: 11 [#1] [ 69.900494] BE PREEMPT CMPCPRO [ 69.907120] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.115-00006-g179ade8ce3-dirty #269 [ 69.915956] task: c0684310 task.stack: c06da000 [ 69.920470] NIP: c033e164 LR: c02e44d0 CTR: c02e41fc [ 69.925504] REGS: dfff1e20 TRAP: 0300 Not tainted (4.14.115-00006-g179ade8ce3-dirty) [ 69.934161] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 22004428 XER: 20000000 [ 69.940869] DAR: f0000100 DSISR: 20000000 [ 69.940869] GPR00: c0352d70 dfff1ed0 c0684310 f00000a4 00000040 dfff1f68 00000000 0000001f [ 69.940869] GPR08: df53f410 1cc00040 00000021 c0781640 42004424 100c82b6 f00000a4 df53f5b0 [ 69.940869] GPR16: df53f6c0 c05daf84 00000040 00000000 00000040 c0782be4 00000000 00000001 [ 69.940869] GPR24: 00000000 df53f400 000001b0 df53f410 df53f000 0000003f df708220 1cc00044 [ 69.978348] NIP [c033e164] skb_put+0x0/0x5c [ 69.982528] LR [c02e44d0] ucc_geth_poll+0x2d4/0x3f8 [ 69.987384] Call Trace: [ 69.989830] [dfff1ed0] [c02e4554] ucc_geth_poll+0x358/0x3f8 (unreliable) [ 69.996522] [dfff1f20] [c0352d70] net_rx_action+0x248/0x30c [ 70.002099] [dfff1f80] [c04e93e4] __do_softirq+0xfc/0x310 [ 70.007492] [dfff1fe0] [c0021124] irq_exit+0xd0/0xd4 [ 70.012458] [dfff1ff0] [c000e7e0] call_do_irq+0x24/0x3c [ 70.017683] [c06dbe80] [c0006bac] do_IRQ+0x64/0xc4 [ 70.022474] [c06dbea0] [c001097c] ret_from_except+0x0/0x14 [ 70.027964] --- interrupt: 501 at rcu_idle_exit+0x84/0x90 [ 70.027964] LR = rcu_idle_exit+0x74/0x90 [ 70.037585] [c06dbf60] [20000000] 0x20000000 (unreliable) [ 70.042984] [c06dbf80] [c004bb0c] do_idle+0xb4/0x11c [ 70.047945] [c06dbfa0] [c004bd14] cpu_startup_entry+0x18/0x1c [ 70.053682] [c06dbfb0] [c05fb034] start_kernel+0x370/0x384 [ 70.059153] [c06dbff0] [00003438] 0x3438 [ 70.063062] Instruction dump: [ 70.066023] 38a00000 38800000 90010014 4bfff015 80010014 7c0803a6 3123ffff 7c691910 [ 70.073767] 38210010 4e800020 38600000 4e800020 <80e3005c> 80c30098 3107ffff 7d083910 [ 70.081690] ---[ end trace be7ccd9c1e1a9f12 ]--- This patch forbids the modification of the number of buffers in the ring while the interface is running. Fixes: ac421852b3a0 ("ucc_geth: add ethtool support") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ucc_geth: Reset BQL queue when stopping deviceMathias Thore2019-02-06
| | | | | | | | | | | | | | [ Upstream commit e15aa3b2b1388c399c1a2ce08550d2cc4f7e3e14 ] After a timeout event caused by for example a broadcast storm, when the MAC and PHY are reset, the BQL TX queue needs to be reset as well. Otherwise, the device will exhibit severe performance issues even after the storm has ended. Co-authored-by: David Gounaris <david.gounaris@infinera.com> Signed-off-by: Mathias Thore <mathias.thore@infinera.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gianfar: Fix Rx byte accounting for ndev statsClaudiu Manoil2018-05-30
| | | | | | | | | | | | | | | | | | | [ Upstream commit 590399ddf9561f2ed0839311c8ae1be21597ba68 ] Don't include in the Rx bytecount of the packet sent up the stack: the FCB (frame control block), and the padding bytes inserted by the controller into the frame payload, nor the FCS. All these are being pulled out of the skb by gfar_process_frame(). This issue is old, likely from the driver's beginnings, however it was amplified by recent: commit d903ec77118c ("gianfar: simplify FCS handling and fix memory leak") which basically added the FCS to the Rx bytecount, and so brought this to my attention. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: freescale: fix potential null pointer dereferenceGustavo A. R. Silva2018-04-13
| | | | | | | | | | | | | [ Upstream commit 06d2d6431bc8d41ef5ffd8bd4b52cea9f72aed22 ] Add NULL check before dereferencing pointer _id_ in order to avoid a potential NULL pointer dereference. Addresses-Coverity-ID: 1397995 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: fec: Fix unbalanced PM runtime callsFlorian Fainelli2018-03-31
| | | | | | | | | | | | | | | | | | [ Upstream commit a069215cf5985f3aa1bba550264907d6bd05c5f7 ] When unbinding/removing the driver, we will run into the following warnings: [ 259.655198] fec 400d1000.ethernet: 400d1000.ethernet supply phy not found, using dummy regulator [ 259.665065] fec 400d1000.ethernet: Unbalanced pm_runtime_enable! [ 259.672770] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00 [ 259.683062] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: f2:3e:93:b7:29:c1 [ 259.696239] libphy: fec_enet_mii_bus: probed Avoid these warnings by balancing the runtime PM calls during fec_drv_remove(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: gianfar_ptp: move set_fipers() to spinlock protecting areaYangbo Lu2018-03-03
| | | | | | | | | | | | | | | | [ Upstream commit 11d827a993a969c3c6ec56758ff63a44ba19b466 ] set_fipers() calling should be protected by spinlock in case that any interrupt breaks related registers setting and the function we expect. This patch is to move set_fipers() to spinlock protecting area in ptp_gianfar_adjtime(). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gianfar: fix a flooded alignment reports because of padding issue.Zumeng Chen2018-02-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 58117672943734715bbe7565ac9f062effa524f0 ] According to LS1021A RM, the value of PAL can be set so that the start of the IP header in the receive data buffer is aligned to a 32-bit boundary. Normally, setting PAL = 2 provides minimal padding to ensure such alignment of the IP header. However every incoming packet's 8-byte time stamp will be inserted into the packet data buffer as padding alignment bytes when hardware time stamping is enabled. So we set the padding 8+2 here to avoid the flooded alignment faults: root@128:~# cat /proc/cpu/alignment User: 0 System: 17539 (inet_gro_receive+0x114/0x2c0) Skipped: 0 Half: 0 Word: 0 DWord: 0 Multi: 17539 User faults: 2 (fixup) Also shown when exception report enablement CPU: 0 PID: 161 Comm: irq/66-eth1_g0_ Not tainted 4.1.21-rt13-WR8.0.0.0_preempt-rt #16 Hardware name: Freescale LS1021A [<8001b420>] (unwind_backtrace) from [<8001476c>] (show_stack+0x20/0x24) [<8001476c>] (show_stack) from [<807cfb48>] (dump_stack+0x94/0xac) [<807cfb48>] (dump_stack) from [<80025d70>] (do_alignment+0x720/0x958) [<80025d70>] (do_alignment) from [<80009224>] (do_DataAbort+0x40/0xbc) [<80009224>] (do_DataAbort) from [<80015398>] (__dabt_svc+0x38/0x60) Exception stack(0x86ad1cc0 to 0x86ad1d08) 1cc0: f9b3e080 86b3d072 2d78d287 00000000 866816c0 86b3d05e 86e785d0 00000000 1ce0: 00000011 0000000e 80840ab0 86ad1d3c 86ad1d08 86ad1d08 806d7fc0 806d806c 1d00: 40070013 ffffffff [<80015398>] (__dabt_svc) from [<806d806c>] (inet_gro_receive+0x114/0x2c0) [<806d806c>] (inet_gro_receive) from [<80660eec>] (dev_gro_receive+0x21c/0x3c0) [<80660eec>] (dev_gro_receive) from [<8066133c>] (napi_gro_receive+0x44/0x17c) [<8066133c>] (napi_gro_receive) from [<804f0538>] (gfar_clean_rx_ring+0x39c/0x7d4) [<804f0538>] (gfar_clean_rx_ring) from [<804f0bf4>] (gfar_poll_rx_sq+0x58/0xe0) [<804f0bf4>] (gfar_poll_rx_sq) from [<80660b10>] (net_rx_action+0x27c/0x43c) [<80660b10>] (net_rx_action) from [<80033638>] (do_current_softirqs+0x1e0/0x3dc) [<80033638>] (do_current_softirqs) from [<800338c4>] (__local_bh_enable+0x90/0xa8) [<800338c4>] (__local_bh_enable) from [<8008025c>] (irq_forced_thread_fn+0x70/0x84) [<8008025c>] (irq_forced_thread_fn) from [<800805e8>] (irq_thread+0x16c/0x244) [<800805e8>] (irq_thread) from [<8004e490>] (kthread+0xe8/0x104) [<8004e490>] (kthread) from [<8000fda8>] (ret_from_fork+0x14/0x2c) Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: fec: fix multicast filtering hardware setupRui Sousa2017-12-09
| | | | | | | | | | | | | | | [ Upstream commit 01f8902bcf3ff124d0aeb88a774180ebcec20ace ] Fix hardware setup of multicast address hash: - Never clear the hardware hash (to avoid packet loss) - Construct the hash register values in software and then write once to hardware Signed-off-by: Rui Sousa <rui.sousa@nxp.com> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gianfar: Fix Tx flow control deactivationClaudiu Manoil2017-09-27
| | | | | | | | | | | | | | | | | | | [ Upstream commit 5d621672bc1a1e5090c1ac5432a18c79e0e13e03 ] The wrong register is checked for the Tx flow control bit, it should have been maccfg1 not maccfg2. This went unnoticed for so long probably because the impact is hardly visible, not to mention the tangled code from adjust_link(). First, link flow control (i.e. handling of Rx/Tx link level pause frames) is disabled by default (needs to be enabled via 'ethtool -A'). Secondly, maccfg2 always returns 0 for tx_flow_oldval (except for a few old boards), which results in Tx flow control remaining always on once activated. Fixes: 45b679c9a3ccd9e34f28e6ec677b812a860eb8eb ("gianfar: Implement PAUSE frame generation support") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gianfar: Do not reuse pages from emergency reserveEric Dumazet2017-07-05
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 69fed99baac186013840ced3524562841296034f ] A driver using dev_alloc_page() must not reuse a page that had to use emergency memory reserve. Otherwise all packets using this page will be immediately dropped, unless for very specific sockets having SOCK_MEMALLOC bit set. This issue might be hard to debug, because only a fraction of the RX ring buffer would suffer from drops. Fixes: 75354148ce69 ("gianfar: Add paged allocation and Rx S/G") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Claudiu Manoil <claudiu.manoil@freescale.com> Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_pageArseny Solokha2017-06-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4af0e5bb95ee3ba5ea4bd7dbb94e1648a5279cc9 ] In spite of switching to paged allocation of Rx buffers, the driver still called dma_unmap_single() in the Rx queues tear-down path. The DMA region unmapping code in free_skb_rx_queue() basically predates the introduction of paged allocation to the driver. While being refactored, it apparently hasn't reflected the change in the DMA API usage by its counterpart gfar_new_page(). As a result, setting an interface to the DOWN state now yields the following: # ip link set eth2 down fsl-gianfar ffe24000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001ecd0000] [size=40] ------------[ cut here ]------------ WARNING: CPU: 1 PID: 189 at lib/dma-debug.c:1123 check_unmap+0x8e0/0xa28 CPU: 1 PID: 189 Comm: ip Tainted: G O 4.9.5 #1 task: dee73400 task.stack: dede2000 NIP: c02101e8 LR: c02101e8 CTR: c0260d74 REGS: dede3bb0 TRAP: 0700 Tainted: G O (4.9.5) MSR: 00021000 <CE,ME> CR: 28002222 XER: 00000000 GPR00: c02101e8 dede3c60 dee73400 000000b6 dfbd033c dfbd36c4 1f622000 dede2000 GPR08: 00000007 c05b1634 1f622000 00000000 22002484 100a9904 00000000 00000000 GPR16: 00000000 db4c849c 00000002 db4c8480 00000001 df142240 db4c84bc 00000000 GPR24: c0706148 c0700000 00029000 c07552e8 c07323b4 dede3cb8 c07605e0 db535540 NIP [c02101e8] check_unmap+0x8e0/0xa28 LR [c02101e8] check_unmap+0x8e0/0xa28 Call Trace: [dede3c60] [c02101e8] check_unmap+0x8e0/0xa28 (unreliable) [dede3cb0] [c02103b8] debug_dma_unmap_page+0x88/0x9c [dede3d30] [c02dffbc] free_skb_resources+0x2c4/0x404 [dede3d80] [c02e39b4] gfar_close+0x24/0xc8 [dede3da0] [c0361550] __dev_close_many+0xa0/0xf8 [dede3dd0] [c03616f0] __dev_close+0x2c/0x4c [dede3df0] [c036b1b8] __dev_change_flags+0xa0/0x174 [dede3e10] [c036b2ac] dev_change_flags+0x20/0x60 [dede3e30] [c03e130c] devinet_ioctl+0x540/0x824 [dede3e90] [c0347dcc] sock_ioctl+0x134/0x298 [dede3eb0] [c0111814] do_vfs_ioctl+0xac/0x854 [dede3f20] [c0111ffc] SyS_ioctl+0x40/0x74 [dede3f40] [c000f290] ret_from_syscall+0x0/0x3c --- interrupt: c01 at 0xff45da0 LR = 0xff45cd0 Instruction dump: 811d001c 7c66482e 813d0020 9061000c 807f000c 5463103a 7cc6182e 3c60c052 386309ac 90c10008 4cc63182 4826b845 <0fe00000> 4bfffa60 3c80c052 388402c4 ---[ end trace 695ae6d7ac1d0c47 ]--- Mapped at: [<c02e22a8>] gfar_alloc_rx_buffs+0x178/0x248 [<c02e3ef0>] startup_gfar+0x368/0x570 [<c036aeb4>] __dev_open+0xdc/0x150 [<c036b1b8>] __dev_change_flags+0xa0/0x174 [<c036b2ac>] dev_change_flags+0x20/0x60 Even though the issue was discovered in 4.9 kernel, the code in question is identical in the current net and net-next trees. Fixes: 75354148ce69 ("gianfar: Add paged allocation and Rx S/G") Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: fec: set mac address unconditionallyGavin Schenk2016-11-15
| | | | | | | | | | | | | | | | | | [ Upstream commit b82d44d78480faff7456e9e0999acb9d38666057 ] If the mac address origin is not dt, you can only safely assign a mac address after "link up" of the device. If the link is off the clocks are disabled and because of issues assigning registers when clocks are off the new mac address cannot be written in .ndo_set_mac_address() on some soc's. This fix sets the mac address unconditionally in fec_restart(...) and ensures consistency between fec registers and the network layer. Signed-off-by: Gavin Schenk <g.schenk@eckelmann.de> Acked-by: Fugang Duan <fugang.duan@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9638d19e4816 ("net: fec: add netif status check before set mac address") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: fec: only clear a queue's work bit if the queue was emptiedUwe Kleine-König2016-05-18
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 1c021bb717a70aaeaa4b25c91f43c2aeddd922de ] In the receive path a queue's work bit was cleared unconditionally even if fec_enet_rx_queue only read out a part of the available packets from the hardware. This resulted in not reading any packets in the next napi turn and so packets were delayed or lost. The obvious fix is to only clear a queue's bit when the queue was emptied. Fixes: 4d494cdc92b3 ("net: fec: change data structure to support multiqueue") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Fugang Duan <fugang.duan@nxp.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* 82xx: FCC: Fixing a bug causing to FCC port lock-upMartin Roth2015-12-16
| | | | | | | | | | | | The patch fixes FCC port lock-up, which occurs as a result of a bug during underrun/collision handling. Within the tx_startup() function in mac-fcc.c, the address of last BD is not calculated correctly. As a result of wrong calculation of the last BD address, the next transmitted BD may be set to an area out of the transmit BD ring. This actually causes to port lock-up and it is not recoverable. Signed-off-by: Martin Roth <martin.roth@motorolasolutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Don't enable RX Filer if not supportedHamish Martin2015-12-16
| | | | | | | | | | | | | | | | | | | | | | | After commit 15bf176db1fb ("gianfar: Don't enable the Filer w/o the Parser"), 'TSEC' model controllers (for example as seen on MPC8541E) always have 8 bytes stripped from the front of received frames. Only 'eTSEC' gianfar controllers have the RX Filer capability (amongst other enhancements). Previously this was treated as always enabled for both 'TSEC' and 'eTSEC' controllers. In commit 15bf176db1fb ("gianfar: Don't enable the Filer w/o the Parser") a subtle change was made to the setting of 'uses_rxfcb' to effectively always set it (since 'rx_filer_enable' was always true). This had the side-effect of always stripping 8 bytes from the front of received frames on 'TSEC' type controllers. We now only enable the RX Filer capability on controller types that support it, thereby avoiding the issue for 'TSEC' type controllers. Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Reviewed-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fsl: avoid 64-bit warning on pq_mdioArnd Bergmann2015-12-08
| | | | | | | | | | | | | | | | The pq_mdio driver can now be built for ARM64, where we get a format string warning: drivers/net/ethernet/freescale/fsl_pq_mdio.c: In function 'fsl_pq_mdio_probe': drivers/net/ethernet/freescale/fsl_pq_mdio.c:467:25: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'long int' [-Wformat=] The argument is an implicit ptrdiff_t from the subtraction of two pointers, so we should use the %z format string modifier to make this work on 64-bit architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: fe761bcb9046 ("net: fsl: expands dependencies of NET_VENDOR_FREESCALE") Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fsl: Fix error checking for platform_get_irq()Mark Brown2015-11-30
| | | | | | | | | | | | | The gianfar driver has recently been enabled on arm64 but fails to build since it check the return value of platform_get_irq() against NO_IRQ. Fix this by instead checking for a negative error code. Even on ARM where this code was previously being built this check was incorrect since platform_get_irq() returns a negative error code which may not be exactly the (unsigned int)(-1) that NO_IRQ is defined to be. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fsl: Don't use NO_IRQ to check return value of irq_of_parse_and_map()Mark Brown2015-11-30
| | | | | | | | | | | | | | This driver can be built on arm64 but relies on NO_IRQ to check the return value of irq_of_parse_and_map() which fails to build on arm64 because the architecture does not provide a NO_IRQ. Fix this to correctly check the return value of irq_of_parse_and_map(). Even on ARM systems where the driver was previously used the check was broken since on ARM NO_IRQ is -1 but irq_of_parse_and_map() returns 0 on error. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fsl: expands dependencies of NET_VENDOR_FREESCALEShaohui Xie2015-11-23
| | | | | | | | | | | | | Freescale hosts some ARMv8 based SoCs, and a generic convention ARCH_LAYERSCAPE is used to cover such SoCs. Adding ARCH_LAYERSCAPE to dependencies of NET_VENDOR_FREESCALE to support networking on those SoCs. The ARCH_LAYERSCAPE is introduced by: commit: 53a5fde05 arm64: Use generic Layerscape SoC family naming Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-11-03
|\ | | | | | | | | | | | | | | Minor overlapping changes in net/ipv4/ipmr.c, in 'net' we were fixing the "BH-ness" of the counter bumps whilst in 'net-next' the functions were modified to take an explicit 'net' parameter. Signed-off-by: David S. Miller <davem@davemloft.net>
| * fec: Use gpio_set_value_cansleep()Fabio Estevam2015-11-01
| | | | | | | | | | | | | | | | | | | | | | We are in a context where we can sleep, and the FEC PHY reset gpio may be on an I2C expander. Use the cansleep() variant when setting the GPIO value. Based on a patch from Russell King for pci-mvebu.c. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-11-01
|\|
| * gianfar: Fix Rx BSY error handlingClaudiu Manoil2015-10-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Rx BSY error interrupt indicates that a frame was received and discarded due to lack of buffers, so it's a rx ring overflow condition and has nothing to do with with bad rx packets. Use the right counter. BSY conditions happen when the SoC is under performance stress. Doing *more* work in stress situations by trying to schedule NAPI is not a good idea as the stressed system becomes still more stressed. The Rx interrupt is already at work making sure the NAPI is scheduled. So calling gfar_receive() here does not help. This issue was present since day 1. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * gianfar: Don't enable the Filer w/o the ParserClaudiu Manoil2015-10-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Under one unusual circumstance it's possible to wrongly set FILREN without enabling PRSDEP as well in the RCTRL register, against the hardware specifications. With the default config this does not happen because the default Rx offloads (Rx csum and Rx VLAN) properly enable PRSDEP. But if anyone disables all these offloads (via ethtool), we get a wrong configuration were the Rx flow classification and hashing, and other Filer based features (e.g. wake-on-filer interrupt) won't work. This patch fixes the issue. Also, account for Rx FCB insertion which happens every time PRSDEP is set. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * gianfar: Remove duplicated argument to bitwise ORClaudiu Manoil2015-10-25
| | | | | | | | | | | | | | | | RQFCR_AND is duplicated. Add missing space as well. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gianfar: Increase TX_TIMEOUT to 5HZAbhimanyu2015-10-27
| | | | | | | | | | | | | | | | | | | | Increased TX_TIMEOUT to 5HZ to accommodate worst case situation for traffic and CPU intensive use cases Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Abhimanyu <abhimanyu@freescale.com> Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-10-20
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/fsl_pq_mdio: fix computed address for the TBI registerGerlando Falauto2015-10-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit afae5ad78b342f401c28b0bb1adb3cd494cb125a "net/fsl_pq_mdio: streamline probing of MDIO nodes" added support for different types of MDIO devices: 1) Gianfar MDIO nodes that only map the MII registers 2) Gianfar MDIO nodes that map the full MDIO register set 3) eTSEC2 MDIO nodes (which map the full MDIO register set) 4) QE MDIO nodes (which map only the MII registers) However, the implementation for types 1 and 4 would mistakenly assume a mapping of the full MDIO register set, thereby computing the address for the TBI register starting from the containing structure. The TBI register would therefore be accessed at a wrong (much bigger) address, not giving the expected result at all. This patch restores the correct behavior we had prior to the above one. The consequences of this bug are apparent when trying to access a PHY with the same address as the value contained in the initial value of the TBI register (normally 0); in that case you'll get answers from the internal TBI device (even though MDIO/MDC pins are actually *also* toggling on the physical bus!). Beware that you also need to add a fake tbi node to your device tree with an unused address. Notice how this fix is related to commit 220669495bf8b68130a8218607147c7b74c28d2b "powerpc: Add TBI PHY node to first MDIO bus" which fixed the behavior in kernel 3.3, which was later broken by the above commit on kernel 3.7. Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Cc: Timur Tabi <timur@tabi.org> Cc: David S. Miller <davem@davemloft.net> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/fsl_pq_mdio: check TBI address for consistency with mapped rangeGerlando Falauto2015-10-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When configuring the MDIO subsystem it is also necessary to configure the TBI register. Make sure the TBI is contained within the mapped register range in order to: a) make sure the address is computed correctly b) make users aware that we're actually accessing that register In case of error, print a message but continue anyway. Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Cc: Timur Tabi <timur@tabi.org> Cc: David S. Miller <davem@davemloft.net> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers/net: get rid of unnecessary initializations in .get_drvinfo()Ivan Vecera2015-10-16
| | | | | | | | | | | | | | | | | | | | | | | | Many drivers initialize uselessly n_priv_flags, n_stats, testinfo_len, eedump_len & regdump_len fields in their .get_drvinfo() ethtool op. It's not necessary as these fields is filled in ethtool_get_drvinfo(). v2: removed unused variable v3: removed another unused variable Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gianfar: Add WAKE_UCAST and "wake-on-filer" supportClaudiu Manoil2015-10-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables eTSEC's filer (Rx parser) and the FGPI Rx interrupt (Filer General Purpose Interrupt) as a wakeup source event. Upon entering suspend state, the eTSEC filer is given a rule to match incoming L2 unicast packets. A packet matching the rule will be enqueued in the Rx ring and a FGPI Rx interrupt will be asserted by the filer to wakeup the system. Other packet types will be dropped. On resume the filer table is restored to the content before entering suspend state. The set of rules from gfar_filer_config_wol() could be extended to implement other WoL capabilities as well. The "fsl,wake-on-filer" DT binding enables this capability on certain platforms that feature the necessary power management infrastructure, targeting mainly printing and imaging applications. (refer to Power Management section of the SoC Ref Man) Cc: Li Yang <leoli@freescale.com> Cc: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: fec: avoid timespec useArnd Bergmann2015-10-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fec_ptp_enable_pps uses an open-coded implementation of ns_to_timespec, which will be removed eventually as it is not y2038-safe on 32-bit architectures. Two more instances of the same code in this file were already converted to use the safe ns_to_timespec64 in commit 6630514fcee ("ptp: fec: use helpers for converting ns to timespec"), this changes the last one as well. The seconds portion here is actually unused and we could just remove the timespec variable, but using ns_to_timespec64 can still be better as the implementation can be hand-optimized in the future. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Fugang Duan <b38611@freescale.com> Cc: Luwei Zhou <b45643@freescale.com> Cc: Frank Li <Frank.Li@freescale.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: fec: Remove unneeded FEATURES_NEED_QUIESCE definitionFabio Estevam2015-09-28
|/ | | | | | | | | There is no need to have FEATURES_NEED_QUIESCE defined as we can simply use NETIF_F_RXCSUM instead as done in other parts of the driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: add phy_device_remove()Russell King2015-09-24
| | | | | | | | | | | | Add a phy_device_remove() function to complement phy_device_register(), which undoes the effects of phy_device_register() by removing the phy device from visibility, but not freeing it. This allows these details to be moved out of the mdio bus code into the phy code where this action belongs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2026-07-09 12:23:53 +0000