summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnxt (follow)
Commit message (Collapse)AuthorAge
* bnxt_en: reverse order of TX disable and carrier offEdwin Peer2021-03-03
| | | | | | | | | | | | | | | [ Upstream commit 132e0b65dc2b8bfa9721bfce834191f24fd1d7ed ] A TX queue can potentially immediately timeout after it is stopped and the last TX timestamp on that queue was more than 5 seconds ago with carrier still up. Prevent these intermittent false TX timeouts by bringing down carrier first before calling netif_tx_disable(). Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* bnxt_en: Release PCI regions when DMA mask setup fails during probe.Michael Chan2020-12-02
| | | | | | | | | | | | | | [ Upstream commit c54bc3ced5106663c2f2b44071800621f505b00e ] Jump to init_err_release to cleanup. bnxt_unmap_bars() will also be called but it will do nothing if the BARs are not mapped yet. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1605858271-8209-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* bnxt_en: fix error return code in bnxt_init_board()Zhang Changzhong2020-12-02
| | | | | | | | | | | | | | | [ Upstream commit 3383176efc0fb0c0900a191026468a58668b4214 ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Link: https://lore.kernel.org/r/1605792621-6268-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* bnxt: don't enable NAPI until rings are readyJakub Kicinski2020-09-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 96ecdcc992eb7f468b2cf829b0f5408a1fad4668 upstream. Netpoll can try to poll napi as soon as napi_enable() is called. It crashes trying to access a doorbell which is still NULL: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 59 PID: 6039 Comm: ethtool Kdump: loaded Tainted: G S 5.9.0-rc1-00469-g5fd99b5d9950-dirty #26 RIP: 0010:bnxt_poll+0x121/0x1c0 Code: c4 20 44 89 e0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 41 8b 86 a0 01 00 00 41 23 85 18 01 00 00 49 8b 96 a8 01 00 00 0d 00 00 00 24 <89> 02 41 f6 45 77 02 74 cb 49 8b ae d8 01 00 00 31 c0 c7 44 24 1a netpoll_poll_dev+0xbd/0x1a0 __netpoll_send_skb+0x1b2/0x210 netpoll_send_udp+0x2c9/0x406 write_ext_msg+0x1d7/0x1f0 console_unlock+0x23c/0x520 vprintk_emit+0xe0/0x1d0 printk+0x58/0x6f x86_vector_activate.cold+0xf/0x46 __irq_domain_activate_irq+0x50/0x80 __irq_domain_activate_irq+0x32/0x80 __irq_domain_activate_irq+0x32/0x80 irq_domain_activate_irq+0x25/0x40 __setup_irq+0x2d2/0x700 request_threaded_irq+0xfb/0x160 __bnxt_open_nic+0x3b1/0x750 bnxt_open_nic+0x19/0x30 ethtool_set_channels+0x1ac/0x220 dev_ethtool+0x11ba/0x2240 dev_ioctl+0x1cf/0x390 sock_do_ioctl+0x95/0x130 Reported-by: Rob Sherwood <rsher@fb.com> Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: Failure to update PHY is not fatal condition.Michael Chan2020-09-12
| | | | | | | | | | | | | commit ba41d46fe03223279054e58d570069fdc62fb768 upstream. If we fail to update the PHY, we should print a warning and continue. The current code to exit is buggy as it has not freed up the NIC resources yet. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: Check for zero dir entries in NVRAM.Vasundhara Volam2020-09-12
| | | | | | | | | | | | | | [ Upstream commit dbbfa96ad920c50d58bcaefa57f5f33ceef9d00e ] If firmware goes into unstable state, HWRM_NVM_GET_DIR_INFO firmware command may return zero dir entries. Return error in such case to avoid zero length dma buffer request. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* bnxt_en: fix NULL dereference in case SR-IOV configuration failsDavide Caratti2020-07-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c8b1d7436045d3599bae56aef1682813ecccaad7 upstream. we need to set 'active_vfs' back to 0, if something goes wrong during the allocation of SR-IOV resources: otherwise, further VF configurations will wrongly assume that bp->pf.vf[x] are valid memory locations, and commands like the ones in the following sequence: # echo 2 >/sys/bus/pci/devices/${ADDR}/sriov_numvfs # ip link set dev ens1f0np0 up # ip link set dev ens1f0np0 vf 0 trust on will cause a kernel crash similar to this: bnxt_en 0000:3b:00.0: not enough MMIO resources for SR-IOV BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 43 PID: 2059 Comm: ip Tainted: G I 5.8.0-rc2.upstream+ #871 Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 2.2.11 06/13/2019 RIP: 0010:bnxt_set_vf_trust+0x5b/0x110 [bnxt_en] Code: 44 24 58 31 c0 e8 f5 fb ff ff 85 c0 0f 85 b6 00 00 00 48 8d 1c 5b 41 89 c6 b9 0b 00 00 00 48 c1 e3 04 49 03 9c 24 f0 0e 00 00 <8b> 43 14 89 c2 83 c8 10 83 e2 ef 45 84 ed 49 89 e5 0f 44 c2 4c 89 RSP: 0018:ffffac6246a1f570 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff98b28f538900 RBP: ffff98b28f538900 R08: 0000000000000000 R09: 0000000000000008 R10: ffffffffb9515be0 R11: ffffac6246a1f678 R12: ffff98b28f538000 R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffc05451e0 FS: 00007fde0f688800(0000) GS:ffff98baffd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000104bb0a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: do_setlink+0x994/0xfe0 __rtnl_newlink+0x544/0x8d0 rtnl_newlink+0x47/0x70 rtnetlink_rcv_msg+0x29f/0x350 netlink_rcv_skb+0x4a/0x110 netlink_unicast+0x21d/0x300 netlink_sendmsg+0x329/0x450 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x204/0x280 ___sys_sendmsg+0x88/0xd0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x47/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c0c050c58d840 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: Fei Liu <feliu@redhat.com> CC: Jonathan Toppins <jtoppins@redhat.com> CC: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: Remove locking around txr->dev_stateFlorian Fainelli2020-05-10
| | | | | | | | | | | | | | | | commit cbce91cad4ee39070bf3c7873767194e4be88e16 upstream. txr->dev_state was not consistently manipulated with the acquisition of the per-queue lock, after further inspection the lock does not seem necessary, either the value is read as BNXT_DEV_STATE_CLOSING or 0. Reported-by: coverity (CID 1339583) Fixes: c0c050c58d840 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt: add a missing rcu synchronizationEric Dumazet2020-05-10
| | | | | | | | | | | | | | | | commit e5f6f564fd191d365fcd775c06a732a488205588 upstream. Add a missing synchronize_net() call to avoid potential use after free, since we explicitly call napi_hash_del() to factorize the RCU grace period. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Michael Chan <michael.chan@broadcom.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: reinitialize IRQs when MTU is modifiedVasundhara Volam2020-03-20
| | | | | | | | | | | | | | | | | | | [ Upstream commit a9b952d267e59a3b405e644930f46d252cea7122 ] MTU changes may affect the number of IRQs so we must call bnxt_close_nic()/bnxt_open_nic() with the irq_re_init parameter set to true. The reason is that a larger MTU may require aggregation rings not needed with smaller MTU. We may not be able to allocate the required number of aggregation rings and so we reduce the number of channels which will change the number of IRQs. Without this patch, it may crash eventually in pci_disable_msix() when the IRQs are not properly unwound. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: Fix aggregation buffer leak under OOM condition.Michael Chan2019-06-11
| | | | | | | | | | | | | | | | | | [ Upstream commit 296d5b54163964b7ae536b8b57dfbd21d4e868e1 ] For every RX packet, the driver replenishes all buffers used for that packet and puts them back into the RX ring and RX aggregation ring. In one code path where the RX packet has one RX buffer and one or more aggregation buffers, we missed recycling the aggregation buffer(s) if we are unable to allocate a new SKB buffer. This leads to the aggregation ring slowly running out of buffers over time. Fix it by properly recycling the aggregation buffers. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: Rakesh Hemnani <rhemnani@fb.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: Improve multicast address setup logic.Michael Chan2019-05-16
| | | | | | | | | | | | | | | | [ Upstream commit b4e30e8e7ea1d1e35ffd64ca46f7d9a7f227b4bf ] The driver builds a list of multicast addresses and sends it to the firmware when the driver's ndo_set_rx_mode() is called. In rare cases, the firmware can fail this call if internal resources to add multicast addresses are exhausted. In that case, we should try the call again by setting the ALL_MCAST flag which is more guaranteed to succeed. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: Drop oversize TX packets to prevent errors.Michael Chan2019-03-23
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2b3c6885386020b1b9d92d45e8349637e27d1f66 ] There have been reports of oversize UDP packets being sent to the driver to be transmitted, causing error conditions. The issue is likely caused by the dst of the SKB switching between 'lo' with 64K MTU and the hardware device with a smaller MTU. Patches are being proposed by Mahesh Bandewar <maheshb@google.com> to fix the issue. In the meantime, add a quick length check in the driver to prevent the error. The driver uses the TX packet size as index to look up an array to setup the TX BD. The array is large enough to support all MTU sizes supported by the driver. The oversize TX packet causes the driver to index beyond the array and put garbage values into the TX BD. Add a simple check to prevent this. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: Fix TX timeout during netpoll.Michael Chan2018-10-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 73f21c653f930f438d53eed29b5e4c65c8a0f906 ] The current netpoll implementation in the bnxt_en driver has problems that may miss TX completion events. bnxt_poll_work() in effect is only handling at most 1 TX packet before exiting. In addition, there may be in flight TX completions that ->poll() may miss even after we fix bnxt_poll_work() to handle all visible TX completions. netpoll may not call ->poll() again and HW may not generate IRQ because the driver does not ARM the IRQ when the budget (0 for netpoll) is reached. We fix it by handling all TX completions and to always ARM the IRQ when we exit ->poll() with 0 budget. Also, the logic to ACK the completion ring in case it is almost filled with TX completions need to be adjusted to take care of the 0 budget case, as discussed with Eric Dumazet <edumazet@google.com> Reported-by: Song Liu <songliubraving@fb.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: Fix for system hang if request_irq failsVikas Gupta2018-08-24
| | | | | | | | | | | | | | | [ Upstream commit c58387ab1614f6d7fb9e244f214b61e7631421fc ] Fix bug in the error code path when bnxt_request_irq() returns failure. bnxt_disable_napi() should not be called in this error path because NAPI has not been enabled yet. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: Check valid VNIC ID in bnxt_hwrm_vnic_set_tpa().Michael Chan2018-05-30
| | | | | | | | | | | | | | [ Upstream commit 3c4fe80b32c685bdc02b280814d0cfe80d441c72 ] During initialization, if we encounter errors, there is a code path that calls bnxt_hwrm_vnic_set_tpa() with invalid VNIC ID. This may cause a warning in firmware logs. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine.Venkat Duvvuru2018-03-03
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 78f300049335ae81a5cc6b4b232481dc5e1f9d41 ] In bnxt_vf_ndo_prep (which is called by bnxt_get_vf_config ndo), there is a check for "Invalid VF id". Currently, the check is done against max_vfs. However, the user doesn't always create max_vfs. So, the check should be against the created number of VFs. The number of bnxt_vf_info structures that are allocated in bnxt_alloc_vf_resources routine is the "number of requested VFs". So, if an "invalid VF id" falls between the requested number of VFs and the max_vfs, the driver will be dereferencing an invalid pointer. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Venkat Devvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: Fix NULL pointer dereference in reopen failure pathSankar Patchineelam2017-12-25
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2247925f0942dc4e7c09b1cde45ca18461d94c5f ] Net device reset can fail when the h/w or f/w is in a bad state. Subsequent netdevice open fails in bnxt_hwrm_stat_ctx_alloc(). The cleanup invokes bnxt_hwrm_resource_free() which inturn calls bnxt_disable_int(). In this routine, the code segment if (ring->fw_ring_id != INVALID_HW_RING_ID) BNXT_CP_DB(cpr->cp_doorbell, cpr->cp_raw_cons); results in NULL pointer dereference as cpr->cp_doorbell is not yet initialized, and fw_ring_id is zero. The fix is to initialize cpr fw_ring_id to INVALID_HW_RING_ID before bnxt_init_chip() is invoked. Signed-off-by: Sankar Patchineelam <sankar.patchineelam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: allocate enough space for ->ntp_fltr_bmapDan Carpenter2017-05-14
| | | | | | | | | | | | | [ Upstream commit ac45bd93a5035c2f39c9862b8b6ed692db0fdc87 ] We have the number of longs, but we need to calculate the number of bytes required. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: Implement missing tx timeout reset logic.Michael Chan2015-12-11
| | | | | | | | | | | The reset logic calls bnxt_close_nic() and bnxt_open_nic() under rtnl_lock from bnxt_sp_task. BNXT_STATE_IN_SP_TASK must be cleared before calling bnxt_close_nic() to avoid deadlock. v2: Fixed white space error. Thanks Dave. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Don't cancel sp_task from bnxt_close_nic().Michael Chan2015-12-11
| | | | | | | | | | | | | When implementing driver reset from tx_timeout in the next patch, bnxt_close_nic() will be called from the sp_task workqueue. Calling cancel_work() on sp_task will hang the workqueue. Instead, set a new bit BNXT_STATE_IN_SP_TASK when bnxt_sp_task() is running. bnxt_close_nic() will wait for BNXT_STATE_IN_SP_TASK to clear before proceeding. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Change bp->state to bitmap.Michael Chan2015-12-11
| | | | | | | | This allows multiple independent bits to be set for various states. Subsequent patches to implement tx timeout reset will require this. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Fix bitmap declaration to work on 32-bit arches.Michael Chan2015-12-11
| | | | | | | | | The declaration of the bitmap vf_req_snif_bmap using fixed array of unsigned long will only work on 64-bit archs. Use DECLARE_BITMAP instead which will work on all archs. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Setup uc_list mac filters after resetting the chip.Michael Chan2015-12-03
| | | | | | | | | | | | | Call bnxt_cfg_rx_mode() in bnxt_init_chip() to setup uc_list and mc_list mac address filters. Before the patch, uc_list is not setup again after chip reset (such as ethtool ring size change) and macvlans don't work any more after that. Modify bnxt_cfg_rx_mode() to return error codes appropriately so that the init chip sequence can detect any failures. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: enforce proper storing of MAC addressJeffrey Huang2015-12-03
| | | | | | | | | | | | | | | | For PF, the bp->pf.mac_addr always holds the permanent MAC addr assigned by the HW. For VF, the bp->vf.mac_addr always holds the administrator assigned VF MAC addr. The random generated VF MAC addr should never get stored to bp->vf.mac_addr. This way, when the VF wants to change the MAC address, we can tell if the adminstrator has already set it and disallow the VF from changing it. v2: Fix compile error if CONFIG_BNXT_SRIOV is not set. Signed-off-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Fixed incorrect implementation of ndo_set_mac_addressJeffrey Huang2015-12-03
| | | | | | | | | | | | | | The existing ndo_set_mac_address only copies the new MAC addr and didn't set the new MAC addr to the HW. The correct way is to delete the existing default MAC filter from HW and add the new one. Because of RFS filters are also dependent on the default mac filter l2 context, the driver must go thru close_nic() to delete the default MAC and RFS filters, then open_nic() to set the default MAC address to HW. Signed-off-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: More robust SRIOV cleanup sequence.Jeffrey Huang2015-11-05
| | | | | | | | | | | | | | Instead of always calling pci_sriov_disable() in remove_one(), the driver should detect whether VFs are currently assigned to the VMs. If the VFs are active in VMs, then it should not disable SRIOV as it is catastrophic to the VMs. Instead, it just leaves the VFs alone and continues to unload the PF. The user can then cleanup the VMs even after the PF driver has been unloaded. Signed-off-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Fix comparison of u16 sw_id against negative value.Michael Chan2015-11-05
| | | | | | | | | | | Assign the return value from bitmap_find_free_region() to an integer variable and check for negative error codes first, before assigning the bit ID to the unsigned sw_id field. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: map CAG_REG_LEGACY_INT_STATUS_MASK to GRC window #4Jeffrey Huang2015-11-05
| | | | | | | | | | | In order to use offset 0x4014 for reading CAG interrupt status, the actual CAG register must be mapped to GRC bar0 window #4. Otherwise, the driver is reading garbage. This patch corrects this issue. Signed-off-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Determine tcp/ipv6 RSS hash type correctly.Michael Chan2015-11-05
| | | | | | | | | The profile ID in the completion record needs to be ANDed with the profile ID mask of 0x1f. This bug was causing the SKB hash type and the gso_type to be wrong in some cases. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Change sp events definitions to represent bit position.Jeffrey Huang2015-11-05
| | | | | | | | | Fix the sp event bits to be bit positions instead of bit values since the bit helper functions are expecting the former. Signed-off-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Fix compile warnings when CONFIG_INET is not set.Michael Chan2015-10-25
| | | | | | | | | | | bnxt_gro_skb() has unused variables when CONFIG_INET is not set. We really cannot support hardware GRO if CONFIG_INET is not set, so compile out bnxt_gro_skb() completely and define BNXT_FLAG_GRO to be 0 if CONFIG_INET is not set. This will effectively always disable hardware GRO if CONFIG_INET is not set. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Fix compile errors when CONFIG_BNXT_SRIOV is not set.Michael Chan2015-10-23
| | | | | | | | | | struct bnxt_pf_info needs to be always defined. Move bnxt_update_vf_mac() to bnxt_sriov.c and add some missing #ifdef CONFIG_BNXT_SRIOV. Reported-by: Jim Hull <jim.hull@hpe.com> Tested-by: Jim Hull <jim.hull@hpe.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: New Broadcom ethernet driver.Michael Chan2015-10-22
Broadcom ethernet driver for the new family of NetXtreme-C/E ethernet devices. v5: - Removed empty blank lines at end of files (noted by David Miller). - Moved busy poll helper functions to bnxt.h to at least make the .c file look less cluttered with #ifdef (noted by Stephen Hemminger). v4: - Broke up 2 long message strings with "\n" (suggested by John Linville) - Constify an array of strings (suggested by Stephen Hemminger) - Improve bnxt_vf_pciid() (suggested by Stephen Hemminger) - Use PCI_VDEVICE() to populate pci_device_id table for more compact source. v3: - Fixed 2 more sparse warnings. - Removed some unused structures in .h files. v2: - Fixed all kbuild test robot reported warnings. - Fixed many of the checkpatch.pl errors and warnings. - Fixed the Kconfig description (noted by Dmitry Kravkov). Acked-by: Eddie Wai <eddie.wai@broadcom.com> Acked-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2026-01-28 15:46:20 +0000