summaryrefslogtreecommitdiff
path: root/drivers/media/usb/dvb-usb-v2 (follow)
Commit message (Collapse)AuthorAge
* media: rtl28xxu: fix zero-length control requestJohan Hovold2021-08-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 76f22c93b209c811bd489950f17f8839adb31901 upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning. The driver uses a zero-length i2c-read request for type detection so update the control-request code to use usb_sndctrlpipe() in this case. Note that actually trying to read the i2c register in question does not work as the register might not exist (e.g. depending on the demodulator) as reported by Eero Lehtinen <debiangamer2@gmail.com>. Reported-by: syzbot+faf11bbadc5a372564da@syzkaller.appspotmail.com Reported-by: Eero Lehtinen <debiangamer2@gmail.com> Tested-by: Eero Lehtinen <debiangamer2@gmail.com> Fixes: d0f232e823af ("[media] rtl28xxu: add heuristic to detect chip type") Cc: stable@vger.kernel.org # 4.0 Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* media: lmedm04: Fix misuse of commaJoe Perches2021-03-03
| | | | | | | | | | | | | | | | [ Upstream commit 59a3e78f8cc33901fe39035c1ab681374bba95ad ] There's a comma used instead of a semicolon that causes multiple statements to be executed after an if instead of just the intended single statement. Replace the comma with a semicolon. Fixes: 15e1ce33182d ("[media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* media: af9035: prevent buffer overflow on writeJozef Balga2018-10-20
| | | | | | | | | | | | | | | | | [ Upstream commit 312f73b648626a0526a3aceebb0a3192aaba05ce ] When less than 3 bytes are written to the device, memcpy is called with negative array size which leads to buffer overflow and kernel panic. This patch adds a condition and returns -EOPNOTSUPP instead. Fixes bugzilla issue 64871 [mchehab+samsung@kernel.org: fix a merge conflict and changed the condition to match the patch's comment, e. g. len == 3 could also be valid] Signed-off-by: Jozef Balga <jozef.balga@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* media: dvb-usb-v2: lmedm04: move ts2020 attach to dm04_lme2510_tunerMalcolm Priestley2018-02-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7bf7a7116ed313c601307f7e585419369926ab05 upstream. When the tuner was split from m88rs2000 the attach function is in wrong place. Move to dm04_lme2510_tuner to trap errors on failure and removing a call to lme_coldreset. Prevents driver starting up without any tuner connected. Fixes to trap for ts2020 fail. LME2510(C): FE Found M88RS2000 ts2020: probe of 0-0060 failed with error -11 ... LME2510(C): TUN Found RS2000 tuner kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* media: dvb-usb-v2: lmedm04: Improve logic checking of warm startMalcolm Priestley2018-02-16
| | | | | | | | | | | | | | | | | | | | | commit 3d932ee27e852e4904647f15b64dedca51187ad7 upstream. Warm start has no check as whether a genuine device has connected and proceeds to next execution path. Check device should read 0x47 at offset of 2 on USB descriptor read and it is the amount requested of 6 bytes. Fix for kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access as Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dvb-usb-v2: avoid use-after-freeArnd Bergmann2017-04-21
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 005145378c9ad7575a01b6ce1ba118fb427f583a upstream. I ran into a stack frame size warning because of the on-stack copy of the USB device structure: drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usbv2_disconnect': drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:1029:1: error: the frame size of 1104 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Copying a device structure like this is wrong for a number of other reasons too aside from the possible stack overflow. One of them is that the dev_info() call will print the name of the device later, but AFAICT we have only copied a pointer to the name earlier and the actual name has been freed by the time it gets printed. This removes the on-stack copy of the device and instead copies the device name using kstrdup(). I'm ignoring the possible failure here as both printk() and kfree() are able to deal with NULL pointers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'media/v4.4-1' of ↵Linus Torvalds2015-11-05
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "Media updates, including: - Lots of improvements at the kABI documentation - Split of Videobuf2 into a common part and a V4L2 specific one - Split of the VB2 tracing events into a separate header file - s5p-mfc got support for Exynos 5433 - v4l2 fixes for 64-bits alignment when running 32 bits userspace on ARM - Added support for SDR radio transmitter at core, vivid and hackrf drivers - Some y2038 fixups - Some improvements at V4L2 colorspace support - saa7164 converted to use the V4L2 core control framework - several new boards additions, cleanups and fixups PS: There are two patches for scripts/kernel-doc that are needed by the documentation patches on Media. Jon is OK on merging those via my tree" * tag 'media/v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (146 commits) [media] c8sectpfe: Remove select on CONFIG_FW_LOADER_USER_HELPER_FALLBACK [media] DocBook media: update copyright/version numbers [media] ivtv: Convert to get_user_pages_unlocked() [media] media/v4l2-ctrls: fix setting autocluster to manual with VIDIOC_S_CTRL [media] DocBook media: Fix a typo in encoder cmd [media] DocBook: add SDR specific info to G_MODULATOR / S_MODULATOR [media] DocBook: add SDR specific info to G_TUNER / S_TUNER [media] hackrf: do not set human readable name for formats [media] hackrf: add support for transmitter [media] hackrf: switch to single function which configures everything [media] hackrf: add control for RF amplifier [media] DocBook: add modulator type field [media] v4l: add type field to v4l2_modulator struct [media] DocBook: document SDR transmitter [media] v4l2: add support for SDR transmitter [media] DocBook: document tuner RF gain control [media] v4l2: add RF gain control [media] v4l2: rename V4L2_TUNER_ADC to V4L2_TUNER_SDR [media] media/vivid-osd: fix info leak in ioctl [media] media: videobuf2: Move v4l2-specific stuff to videobuf2-v4l2 ...
| * [media] Add Terratec H7 Revision 4 to DVBSky driverErik Andresen2015-10-03
| | | | | | | | | | | | | | Adds Terratec H7 Rev. 4 with USB id 0ccd:10a5 to DVBSky driver. Signed-off-by: Erik Andresen <erik@vontaene.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] Compro U650F supportGraham Eccleston2015-10-03
| | | | | | | | | | | | | | Added Compro U650F to the rtl28xxu devices. Signed-off-by: Graham Eccleston <grahameccleston_@hotmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] rtl28xxu: fix control message flawsAntti Palosaari2015-10-22
|/ | | | | | | | | | | | | | Add lock to prevent concurrent access for control message as control message function uses shared buffer. Without the lock there may be remote control polling which messes the buffer causing IO errors. Increase buffer size and add check for maximum supported message length. Link: https://bugzilla.kernel.org/show_bug.cgi?id=103391 Fixes: c56222a6b25c ("[media] rtl28xxu: move usb buffers to state") Cc: <stable@vger.kernel.org> # 4.0+ Signed-off-by: Antti Palosaari <crope@iki.fi>
* [media] lmedm04: NEC scancode cleanupDavid Härdeman2015-07-06
| | | | | | | | | This changes the keymap back to the state before commit 616a4b83 and changes the driver to use full NEC32 scancodes following the instructions provided by Malcolm Priestley <tvboxspy@gmail.com>. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] lmedm04: fix the range for relative measurementsMauro Carvalho Chehab2015-06-24
| | | | | | | | | | | | | | | | Relative measurements are typically between 0 and 0xffff. However, for some tuners (TUNER_S7395 and TUNER_S0194), the range were from 0 to 0xff00, with means that 100% is never archived. Also, TUNER_RS2000 uses a more complex math. So, create a macro that does the conversion using bit operations and use it for all conversions. The code is also easier to read with is a bonus. While here, remove a bogus comment. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] lmedm04: use u32 instead of u64 for relative statsMauro Carvalho Chehab2015-06-24
| | | | | | | | | | | | | | Cleanup this sparse warning: drivers/media/usb/dvb-usb-v2/lmedm04.c:302 lme2510_update_stats() warn: should '((255 - st->signal_sn - 161) * 3) << 8' be a 64 bit type? Both c_tmp and s_tmp actually stores a u16 stat. Using a u64 data there is a waste, specially on u32 archs, as 64 ints there are more expensive. So, change the types to u32 and do the typecast only when storing the result. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] lmedm04: implement dvb v5 statisticsMalcolm Priestley2015-06-10
| | | | | | | | | | | | | | | Indroduce function lme2510_update_stats to update statistics directly from usb interrupt. Provide signal and snr wrap rounds for dvb v3 functions. Block and post bit are not available. When i2c_talk_onoff is on no statistics are available, with possible future hand over to the relevant frontend/tuner. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] lmedm04: Enable dont_poll for TS2020 tunerMalcolm Priestley2015-06-10
| | | | | | | | | | | | | Following a change made to TS2020 tuner in patches ts2020: Provide DVBv5 API signal strength ts2020: Allow stats polling to be suppressed Polling on the driver must be suppressed because the demuxer is stopped by I2C messages. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] TS2020: Calculate tuner gain correctlyDavid Howells2015-06-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TS2020 and TS2022 tuners take an input from the demodulator indicating the AGC setting on that component that is then used to influence the tuner's own gain. This should be taken into account when calculating the gain and signal strength. Further, the existing TS2020 driver miscalculates the signal strength as the result of its calculations can exceed the storage capacity of the 16-bit word used to return it to userspace. To this end: (1) Add a callback function (->get_agc_pwm()) in the ts2020_config struct that the tuner can call to get the AGC PWM value from the demodulator. (2) Modify the TS2020 driver to calculate the gain according to Montage's specification with the adjustment that we produce a negative value and scale it to 0.001dB units (which is what the DVBv5 API will require): (a) Callback to the demodulator to retrieve the AGC PWM value and then turn that into Vagc for incorporation in the calculations. If the callback is unset, assume a Vagc of 0. (b) Calculate the tuner gain from a combination of Vagc and the tuner's RF gain and baseband gain settings. (3) Turn this into a percentage signal strength as per Montage's specification for return to userspace with the DVBv3 API. (4) Provide a function in the M88DS3103 demodulator driver that can be used to get the AGC PWM value on behalf of the tuner. (5) The ts2020_config.get_agc_pwm function should be set by the code that stitches together the drivers for each card. For the DVBSky cards that use the M88DS3103 with the TS2020 or the TS2022, set the get_agc_pwm function to point to m88ds3103_get_agc_pwm. I have tested this with a DVBSky S952 card which has an M88DS3103 and a TS2022. Thanks to Montage for providing access to information about the workings of these parts. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] dvb: Get rid of typedev usage for enumsMauro Carvalho Chehab2015-06-09
| | | | | | | | | | | | | | | | | The DVB API was originally defined using typedefs. This is against Kernel CodingStyle, and there's no good usage here. While we can't remove its usage on userspace, we can avoid its usage in Kernelspace. So, let's do it. This patch was generated by this shell script: for j in $(grep typedef include/uapi/linux/dvb/frontend.h |cut -d' ' -f 3); do for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f); do sed "s,${j}_t,enum $j," <$i >a && mv a $i; done; done While here, make CodingStyle fixes on the affected lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> # for drivers/media/firewire/*
* [media] af9035: add USB ID 07ca:0337 AVerMedia HD Volar (A867)Antti Palosaari2015-05-30
| | | | | | | | | | | | | It is AF9035 + MxL5007T. Driver reports: prechip_version=00 chip_version=03 chip_type=3802 Not sure if that USB ID is reserved only for HP brand or if it is common, but the stick I have is branded as HP part no. 580715-001 rmn A867. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rtl28xxu: load SDR module for fc2580 based devicesAntti Palosaari2015-05-18
| | | | | | | Load rtl2832_sdr driver for devices having fc2580 tuner. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rtl28xxu: set correct FC2580 tuner for RTL2832 demodAntti Palosaari2015-05-18
| | | | | | | | rtl2832 demod driver has support for FC2580 tuner config, no need to abuse FC0012 settings anymore. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rtl28xxu: bind tua9001 using I2C bindingAntti Palosaari2015-05-18
| | | | | | | Change tua9001 driver from media binding to I2C client binding. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] af9035: bind tua9001 using I2C bindingAntti Palosaari2015-05-18
| | | | | | | Change tua9001 driver from media binding to I2C client binding. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] af9035: fix device order in ID listAntti Palosaari2015-05-18
| | | | | | | | | Driver supports multiple chipset versions. Devices are ordered to ID table per used chipset type. "ITE 9303 Generic" device uses IT9303 chipset and was added mistakenly between IT9135 IDs. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] af9035: bind fc2580 using I2C bindingAntti Palosaari2015-05-18
| | | | | | | Change fc2580 driver from media binding to I2C client binding. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rtl28xxu: bind fc2580 using I2C bindingAntti Palosaari2015-05-18
| | | | | | | Change fc2580 driver from media binding to I2C client binding. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rtl28xxu: fix return value check in rtl2832u_tuner_attach()Wei Yongjun2015-05-12
| | | | | | | | | | In case of error, the function platform_device_register_data() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rtl2832: add support for GoTView MasterHD 3 USB tunerOlli Salonen2015-05-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GoTView MasterHD 3 is a DVB-T2/C USB 2.0 tuner. It's based on the following components: - USB bridge: RTL2832P (contains also DVB-T demodulator) - Demodulator: Si2168-A30 - Tuner: Si2148-A20 The demodulator and the tuner will need firmwares. The Si2148 uses Si2158 firmware. Antti has the firmwares available for download: http://palosaari.fi/linux/v4l-dvb/firmware/ Do note that for DVB-T either of the demodulators can be used. DVB-C and DVB-T2 are only supported by the Si2168 demodulator. The driver will register 2 frontends for the same adapter. Frontend 0 will be the RTL2832 demodulator and frontend 1 will be the Si2168 demodulator. The same tuner is used for both. As a consequence of the above, it's recommended to use application that does implement proper DVBv5 support. For some reason, the old I2C write method sporadically fails. Thus the need for an option to only use the new I2C write method supported by the RTL2832. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rtl28xxu: add I2C read without writeOlli Salonen2015-05-12
| | | | | | | | | | | Add support for I2C read operation without a preceeding write. While here, change the error code to EOPNOTSUPP in case an unsupported I2C operation is attempted. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] si2157: support selection of IF interfaceOlli Salonen2015-05-12
| | | | | | | | | | | | | | The chips supported by the si2157 driver have two IF outputs (either pins 12+13 or pins 9+11). Instead of hardcoding the output to be used add an option to choose which output shall be used. As this patch changes the default behaviour, the IF interface is specified in each driver currently using si2157 driver. This is to keep bisectability. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] dvbsky: use si2168 config option ts_clock_gappedOlli Salonen2015-05-12
| | | | | | | | | Change the dvbsky driver to support gapped clock instead of the current hack. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* Merge branch 'patchwork' into v4l_for_linusMauro Carvalho Chehab2015-04-21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * patchwork: (404 commits) [media] uvcvideo: add support for VIDIOC_QUERY_EXT_CTRL [media] uvcvideo: fix cropcap v4l2-compliance failure [media] media: omap3isp: remove unused clkdev [media] coda: Add tracing support [media] coda: drop dma_sync_single_for_device in coda_bitstream_queue [media] coda: fix fill bitstream errors in nonstreaming case [media] coda: call SEQ_END when the first queue is stopped [media] coda: fail to start streaming if userspace set invalid formats [media] coda: remove duplicate error messages for buffer allocations [media] coda: move parameter buffer in together with context buffer allocation [media] coda: allocate bitstream buffer from REQBUFS, size depends on the format [media] coda: allocate per-context buffers from REQBUFS [media] coda: use strlcpy instead of snprintf [media] coda: bitstream payload is unsigned [media] coda: fix double call to debugfs_remove [media] coda: check kasprintf return value in coda_open [media] coda: bitrate can only be set in kbps steps [media] v4l2-mem2mem: no need to initialize b in v4l2_m2m_next_buf and v4l2_m2m_buf_remove [media] s5p-mfc: set allow_zero_bytesused flag for vb2_queue_init [media] coda: set allow_zero_bytesused flag for vb2_queue_init ...
| * [media] WinFast DTV2000 DS PlusChristian Dale2015-04-08
| | | | | | | | | | | | | | | | | | Add Leadtek WinFast DTV2000DS Plus device based on Realtek RTL2832U. I have not tested the remote, but it is the Y04G0051 model. Signed-off-by: Christian Dale <kernel@techmunk.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] rtl28xxu: add support for Turbo-X DTT2000Dimitris Lampridis2015-04-08
| | | | | | | | | | | | | | | | | | | | | | | | ID 1b80:d3a4 Afatech Simply added the PID (0xd3a4) of this DVB-T USB device to the list of rtl2832u-supported devices. VID (0x1b80) is same as KWORLD2. Tested and verified to work in amd64 with kernels 3.13.0 and 3.16.0. Signed-off-by: Dimitris Lampridis <dlampridis@logikonlabs.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] mn88472: add ts mode and ts clock to driverBenjamin Larsson2015-04-08
| | | | | | | | | | | | Signed-off-by: Benjamin Larsson <benjamin@southpole.se> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] dvbsky: switch ts2022 to ts2020 driverAntti Palosaari2015-04-02
| | | | | | | | | | | | | | | | | | Change ts2022 driver to ts2020 driver. ts2020 driver supports both tuner chip models. Cc: Nibble Max <nibble.max@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] rtl28xxu: lower the rc poll time to mitigate i2c transfer errorsBenjamin Larsson2015-04-02
| | | | | | | | | | | | | | | | | | The Astrometa device has issues with i2c transfers. Lowering the poll time somehow makes these errors disappear. Signed-off-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] use a function for DVB media controller registerMauro Carvalho Chehab2015-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is really a simple function, but using it avoids to have if's inside the drivers. Also, the kABI becomes a little more clearer. This shouldn't generate any overhead, and the type check will happen when compiling with MC DVB enabled. So, let's do it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] dvb: Avoid warnings when compiled without the media controllerMauro Carvalho Chehab2015-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function ‘dvb_usbv2_adapter_dvb_exit’: drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:531:25: warning: unused variable ‘d’ [-Wunused-variable] struct dvb_usb_device *d = adap_to_d(adap); ^ drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:403:13: warning: ‘dvb_usbv2_media_device_register’ defined but not used [-Wunused-function] static void dvb_usbv2_media_device_register(struct dvb_usb_adapter *adap) drivers/media/usb/dvb-usb/dvb-usb-dvb.c:97:13: warning: ‘dvb_usb_media_device_register’ defined but not used [-Wunused-function] static void dvb_usb_media_device_register(struct dvb_usb_adapter *adap) ^ Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] dvbdev: use adapter arg for dvb_create_media_graph()Mauro Carvalho Chehab2015-03-02
| | | | | | | | | | | | | | | | | | | | Instead of using media_dev argument for dvb_create_media_graph(), use the adapter. That allows to create a stub for this function, if compiled without DVB support, avoiding to add extra if's at the drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] dvb-usb-v2: create one media_dev per adapterMauro Carvalho Chehab2015-02-26
| | | | | | | | | | | | | | | | | | | | | | | | Instead of assuming just one adapter, change the code to store one media controller per adapter. This works fine for dvb-usb, as, on all drivers here, it is not possible to write a media graph that would mix resources between the two different adapters. Acked-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] dvb-usb-v2: add support for the media controller at USB driverRafael Lourenço de Lima Chehab2015-02-26
| | | | | | | | | | | | | | | | | | | | | | | | Create a struct media_device and add it to the dvb adapter. Please notice that the tuner is not mapped yet by the dvb core. [mchehab@osg.samsung.com: use config option MEDIA_CONTROLLER_DVB due to a rebase] Signed-off-by: Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] rtl28xxu: return success for unimplemented FE callbackAntti Palosaari2015-04-02
|/ | | | | | | | | | Return success for FE callback on case we don't have any special implementation. fc0013 tuner driver calls that callback in order to switch antenna input, even we don't provide antenna switch. Returning error caused fc0013 driver given up tuning. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] lmedm04: add read snr, signal strength and ber call backsMalcolm Priestley2015-02-03
| | | | | | | This allows calling the original functions providing the streaming is off. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] lmedm04: Create frontend call back for read statusMalcolm Priestley2015-02-03
| | | | | | | | | | | | | | | | | | | | | | | Create dm04_read_status to check lock through either interrupt values or directly by the call back. When the device is not streaming the frontends original call back is used. When streaming has started it turns off I2C messaging by setting st->i2c_talk_onoff to zero. I2C can only be turn on again by one of the other allowed frontend calls. All old code is removed from lme2510_msg and this function only needs to set st->i2c_talk_onoff to 1. The lock status is saved and when the frondend is locked is maintained by lme2510_int_response who will now just kill the lock. The call back for rs2000 tuner is nologer required. All frontend types have been tested. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] lmedm04: create frontend callbacks for signal/snr/ber/ucblocksMalcolm Priestley2015-02-03
| | | | | | | | | | Create call backs dm04_read_signal_strength, dm04_read_snr and move dm04_read_ber and dm04_read_ucblocks for all frontends Removing the I2C filtering from lme2510_msg and the old rs2000 callbacks. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in ↵Malcolm Priestley2015-02-03
| | | | | | | | | | | | | interrupt urb A quirk of some older firmwares that report endpoint pipe type as PIPE_BULK but the endpoint otheriwse functions as interrupt. Check if usb_endpoint_type is USB_ENDPOINT_XFER_BULK and set as usb_rcvbulkpipe. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] lmedm04: Increase Interupt due time to 200 msecMalcolm Priestley2015-02-03
| | | | | | | | | | | Ocassionally the device fails to report back an interrupt urb status which results in false no lock trigger on the RS2000 demodulator. Increase time from 60 msecs to 200 msecs. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: <stable@vger.kernel.org> # v3.17+ Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rtl28xxu: properly initialize pdataMauro Carvalho Chehab2015-02-03
| | | | | | | | As complained by smatch: drivers/media/usb/dvb-usb-v2/rtl28xxu.c:1159 rtl2832u_tuner_attach() info: 'pdata' is not actually initialized (unreached code). Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rtl28xxu: correct reg access routine name prefixesAntti Palosaari2015-02-03
| | | | | | | Use rtl28xxu_ prefix for all register access routine names. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rtl28xxu: merge rtl2831u and rtl2832u propertiesAntti Palosaari2015-02-03
| | | | | | | | As all the callbacks are already same we could merge device properties struct too and save space. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-22 09:28:22 +0000