summaryrefslogtreecommitdiff
path: root/drivers/clk/samsung (follow)
Commit message (Collapse)AuthorAge
* clk: samsung: exynos4: mark 'chipid' clock as CLK_IGNORE_UNUSEDMarek Szyprowski2020-10-14
| | | | | | | | | | | | | | | | | | | [ Upstream commit f3bb0f796f5ffe32f0fbdce5b1b12eb85511158f ] The ChipID IO region has it's own clock, which is being disabled while scanning for unused clocks. It turned out that some CPU hotplug, CPU idle or even SOC firmware code depends on the reads from that area. Fix the mysterious hang caused by entering deep CPU idle state by ignoring the 'chipid' clock during unused clocks scan, as there are no direct clients for it which will keep it enabled. Fixes: e062b571777f ("clk: exynos4: register clocks using common clock framework") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200922124046.10496-1-m.szyprowski@samsung.com Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1Marek Szyprowski2020-06-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 25bdae0f1c6609ceaf55fe6700654f0be2253d8e ] Mark the SCLK clock for Exynos5433 I2S1 device with IGNORE_UNUSED flag to match its behaviour with SCLK clock for AUD_I2S (I2S0) device until a proper fix for Exynos I2S driver is ready. This fixes the following synchronous abort issue revealed by the probe order change caused by the commit 93d2e4322aa7 ("of: platform: Batch fwnode parsing when adding all top level devices") Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 50 Comm: kworker/0:1 Not tainted 5.7.0-rc5+ #701 Hardware name: Samsung TM2E board (DT) Workqueue: events deferred_probe_work_func pstate: 60000005 (nZCv daif -PAN -UAO) pc : samsung_i2s_probe+0x768/0x8f0 lr : samsung_i2s_probe+0x688/0x8f0 ... Call trace: samsung_i2s_probe+0x768/0x8f0 platform_drv_probe+0x50/0xa8 really_probe+0x108/0x370 driver_probe_device+0x54/0xb8 __device_attach_driver+0x90/0xc0 bus_for_each_drv+0x70/0xc8 __device_attach+0xdc/0x140 device_initial_probe+0x10/0x18 bus_probe_device+0x94/0xa0 deferred_probe_work_func+0x70/0xa8 process_one_work+0x2a8/0x718 worker_thread+0x48/0x470 kthread+0x134/0x160 ret_from_fork+0x10/0x1c Code: 17ffffaf d503201f f94086c0 91003000 (88dffc00) ---[ end trace ccf721c9400ddbd6 ]--- Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: samsung: exynos4: fix refcount leak in exynos4_get_xom()Yangtao Li2020-01-29
| | | | | | | | | | | | | [ Upstream commit cee82eb9532090cd1dc953e845d71f9b1445c84e ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Fixes: e062b571777f ("clk: exynos4: register clocks using common clock framework") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: samsung: exynos5420: Preserve CPU clocks configuration during ↵Marian Mihailescu2020-01-23
| | | | | | | | | | | | | | | | | suspend/resume commit e21be0d1d7bd7f78a77613f6bcb6965e72b22fc1 upstream. Save and restore top PLL related configuration registers for big (APLL) and LITTLE (KPLL) cores during suspend/resume cycle. So far, CPU clocks were reset to default values after suspend/resume cycle and performance after system resume was affected when performance governor has been selected. Fixes: 773424326b51 ("clk: samsung: exynos5420: add more registers to restore list") Signed-off-by: Marian Mihailescu <mihailescu2m@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: samsung: exynos5420: Preserve PLL configuration during suspend/resumeMarek Szyprowski2019-12-05
| | | | | | | | | | | | | | | | [ Upstream commit e9323b664ce29547d996195e8a6129a351c39108 ] Properly save and restore all top PLL related configuration registers during suspend/resume cycle. So far driver only handled EPLL and RPLL clocks, all other were reset to default values after suspend/resume cycle. This caused for example lower G3D (MALI Panfrost) performance after system resume, even if performance governor has been selected. Reported-by: Reported-by: Marian Mihailescu <mihailescu2m@gmail.com> Fixes: 773424326b51 ("clk: samsung: exynos5420: add more registers to restore list") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: samsung: exynos5420: Enable PERIS clocks for suspendMarek Szyprowski2018-11-27
| | | | | | | | | | | | | [ Upstream commit b33228029d842269e17bba591609e83ed422005d ] Ensure that clocks for core SoC modules (including TZPC0..9 modules) are enabled for suspend/resume cycle. This fixes suspend/resume support on Exynos5422-based Odroid XU3/XU4 boards. Suggested-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: samsung: exynos3250: Fix PLL ratesAndrzej Hajda2018-05-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit a8321e7887410a2b2e80ab89d1ef7b30562658ea ] Rates declared in PLL rate tables should match exactly rates calculated from PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. In this patch an erroneous P value for 74176002 output frequency is also corrected. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: samsung: exynos5250: Fix PLL ratesAndrzej Hajda2018-05-30
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2ac051eeabaa411ef89ae7cd5bb8e60cb41ad780 ] Rates declared in PLL rate tables should match exactly rates calculated from PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: samsung: exynos5433: Fix PLL ratesAndrzej Hajda2018-05-30
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ab0447845cffc0fd752df2ccd6b4e34006000ce4 ] Rates declared in PLL rate tables should match exactly rates calculated from the PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: samsung: exynos5260: Fix PLL ratesAndrzej Hajda2018-05-30
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit cdb68fbd4e7962be742c4f29475220c5bf28d8a5 ] Rates declared in PLL rate tables should match exactly rates calculated from the PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: samsung: s3c2410: Fix PLL ratesAndrzej Hajda2018-05-30
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 179db533c08431f509a3823077549773d519358b ] Rates declared in PLL rate tables should match exactly rates calculated from the PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: exynos: use irqsave version of spin_lock to avoid deadlock with irqsMarek Szyprowski2016-03-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6b4feaea251a97bf08c7d41eabdec07f63a11073 upstream. It is allowed to enable/disable clocks from interrupts, so common Exynos ARM clock management code for CPUfreq should use 'irqsave' version of spin_lock calls to avoid potential deadlock caused by spin_lock recursion. The same spin_lock is used by gate/mux clocks during enable/disable calls. This deadlock, can be reproduced by enabling CPUfreq (ondemand or userspace) and decoding video with s5p-mfc driver. Relevant stack trace: [ 5928.061534] BUG: spinlock recursion on CPU#0, bash/1252 [ 5928.061609] lock: 0xee80454c, .magic: dead4ead, .owner: bash/1252, .owner_cpu: 0 [ 5928.068586] CPU: 0 PID: 1252 Comm: bash Tainted: G W 4.4.0-rc4-00001-g447a7fd #678 [ 5928.077260] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 5928.083359] [<c00153dc>] (unwind_backtrace) from [<c00121b4>] (show_stack+0x10/0x14) [ 5928.091072] [<c00121b4>] (show_stack) from [<c0213e28>] (dump_stack+0x68/0xb8) [ 5928.098275] [<c0213e28>] (dump_stack) from [<c005c1ec>] (do_raw_spin_lock+0x184/0x1ac) [ 5928.106177] [<c005c1ec>] (do_raw_spin_lock) from [<c05cfa98>] (_raw_spin_lock_irqsave+0x20/0x28) [ 5928.114943] [<c05cfa98>] (_raw_spin_lock_irqsave) from [<c0468698>] (clk_gate_endisable+0x24/0x98) [ 5928.123882] [<c0468698>] (clk_gate_endisable) from [<c0464d40>] (clk_core_disable+0x60/0x84) [ 5928.132299] [<c0464d40>] (clk_core_disable) from [<c0465e00>] (clk_disable+0x24/0x30) [ 5928.140117] [<c0465e00>] (clk_disable) from [<c03f3b80>] (s5p_mfc_handle_frame+0x254/0x860) [ 5928.148445] [<c03f3b80>] (s5p_mfc_handle_frame) from [<c03f4b34>] (s5p_mfc_irq+0x890/0xa24) [ 5928.156778] [<c03f4b34>] (s5p_mfc_irq) from [<c00627bc>] (handle_irq_event_percpu+0x50/0x14c) [ 5928.165283] [<c00627bc>] (handle_irq_event_percpu) from [<c00628f0>] (handle_irq_event+0x38/0x5c) [ 5928.174143] [<c00628f0>] (handle_irq_event) from [<c0065864>] (handle_fasteoi_irq+0xdc/0x1a4) [ 5928.182645] [<c0065864>] (handle_fasteoi_irq) from [<c0062090>] (generic_handle_irq+0x18/0x28) [ 5928.191236] [<c0062090>] (generic_handle_irq) from [<c00621a4>] (__handle_domain_irq+0x6c/0xdc) [ 5928.199917] [<c00621a4>] (__handle_domain_irq) from [<c0009470>] (gic_handle_irq+0x4c/0x98) [ 5928.208249] [<c0009470>] (gic_handle_irq) from [<c0012c54>] (__irq_svc+0x54/0x90) [ 5928.215709] Exception stack(0xeddb5cb8 to 0xeddb5d00) [ 5928.220745] 5ca0: ee80454c faddfadc [ 5928.228906] 5cc0: 00000000 01000001 ee831ce0 f8114200 ee807c00 01130520 00000403 eddb5d84 [ 5928.237063] 5ce0: ee807c48 2faf0800 ee807c0c eddb5d08 c046b618 c046b634 20000053 ffffffff [ 5928.245225] [<c0012c54>] (__irq_svc) from [<c046b634>] (exynos_cpuclk_notifier_cb+0x170/0x270) [ 5928.253823] [<c046b634>] (exynos_cpuclk_notifier_cb) from [<c003cb58>] (notifier_call_chain+0x44/0x84) [ 5928.263106] [<c003cb58>] (notifier_call_chain) from [<c003ccd4>] (__srcu_notifier_call_chain+0x6c/0x9c) [ 5928.272480] [<c003ccd4>] (__srcu_notifier_call_chain) from [<c003cd1c>] (srcu_notifier_call_chain+0x18/0x20) [ 5928.282288] [<c003cd1c>] (srcu_notifier_call_chain) from [<c0464ed0>] (__clk_notify+0x6c/0x74) [ 5928.290881] [<c0464ed0>] (__clk_notify) from [<c0465388>] (clk_propagate_rate_change+0xa0/0xac) [ 5928.299561] [<c0465388>] (clk_propagate_rate_change) from [<c0465378>] (clk_propagate_rate_change+0x90/0xac) [ 5928.309370] [<c0465378>] (clk_propagate_rate_change) from [<c04666fc>] (clk_core_set_rate_nolock+0x64/0xa8) [ 5928.319091] [<c04666fc>] (clk_core_set_rate_nolock) from [<c0466760>] (clk_set_rate+0x20/0x30) [ 5928.327686] [<c0466760>] (clk_set_rate) from [<c0428c70>] (set_target+0xe8/0x23c) [ 5928.335152] [<c0428c70>] (set_target) from [<c04244d0>] (__cpufreq_driver_target+0x184/0x29c) [ 5928.343655] [<c04244d0>] (__cpufreq_driver_target) from [<c0427128>] (cpufreq_set+0x44/0x64) [ 5928.352074] [<c0427128>] (cpufreq_set) from [<c0423948>] (store_scaling_setspeed+0x5c/0x74) [ 5928.360407] [<c0423948>] (store_scaling_setspeed) from [<c04238d0>] (store+0x7c/0x98) [ 5928.368221] [<c04238d0>] (store) from [<c0132540>] (sysfs_kf_write+0x44/0x48) [ 5928.375338] [<c0132540>] (sysfs_kf_write) from [<c0131b9c>] (kernfs_fop_write+0xb8/0x1bc) [ 5928.383496] [<c0131b9c>] (kernfs_fop_write) from [<c00d71f8>] (__vfs_write+0x2c/0xd4) [ 5928.391308] [<c00d71f8>] (__vfs_write) from [<c00d7de8>] (vfs_write+0xa0/0x144) [ 5928.398598] [<c00d7de8>] (vfs_write) from [<c00d8048>] (SyS_write+0x44/0x84) [ 5928.405631] [<c00d8048>] (SyS_write) from [<c000f540>] (ret_fast_syscall+0x0/0x3c) Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2015-11-10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As usual, this is the massive branch we have for each release. Lots of various updates and additions of hardware descriptions on existing hardware, as well as the usual additions of new boards and SoCs. This is also the first release where we've started mixing 64- and 32-bit DT updates in one branch. (Specific details on what's actually here and new is pretty easy to tell from the diffstat, so there's little point in duplicating listing it here)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits) ARM: dts: uniphier: add system-bus-controller nodes ARM64: juno: disable NOR flash node by default ARM: dts: uniphier: add outer cache controller nodes arm64: defconfig: Enable PCI generic host bridge by default arm64: Juno: Add support for the PCIe host bridge on Juno R1 Documentation: of: Document the bindings used by Juno R1 PCIe host bridge ARM: dts: uniphier: add I2C aliases for ProXstream2 boards dts/Makefile: Add build support for LS2080a QDS & RDB board DTS dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards dts/ls2080a: Update Simulator DTS to add support of various peripherals dts/ls2080a: Remove text about writing to Free Software Foundation dts/ls2080a: Update DTSI to add support of various peripherals doc: DTS: Update DWC3 binding to provide reference to generic bindings doc/bindings: Update GPIO devicetree binding documentation for LS2080A Documentation/dts: Move FSL board-specific bindings out of /powerpc Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards arm64: Rename FSL LS2085A SoC support code to LS2080A arm64: Use generic Layerscape SoC family naming ARM: dts: uniphier: add ProXstream2 Vodka board support ARM: dts: uniphier: add ProXstream2 Gentil board support ...
| * Merge branch 'next/arm64' into next/dtOlof Johansson2015-11-09
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merging in the few patches I had kept separate from main next/dt, since others got merged here directly. * next/arm64: arm64: defconfig: Enable PCI generic host bridge by default arm64: Juno: Add support for the PCIe host bridge on Juno R1 Documentation: of: Document the bindings used by Juno R1 PCIe host bridge arm64: dts: mt8173: Add clocks for SCPSYS unit arm64: dts: mt8173: Add subsystem clock controller device nodes + Linux 4.3-rc5
| | * Merge branch 'for-4.3-rc/ti-clk-fixes' of ↵Stephen Boyd2015-10-02
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://github.com/t-kristo/linux-pm into clk-fixes Pull fixes from Tero Kristo: "A few TI clock driver fixes to pull against 4.3-rc" * 'for-4.3-rc/ti-clk-fixes' of https://github.com/t-kristo/linux-pm: (3 commits) clk: ti: dflt: fix enable_reg validity check clk: ti: fix dual-registration of uart4_ick clk: ti: clk-7xx: Remove hardwired ABE clock configuration
| * | | clk: samsung: exynos5250: Add DISP1 clocksTomeu Vizoso2015-10-24
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the DISP1 power domain is powered off, there's two clocks that need to be temporarily reparented to OSC, and back to their original parents when the domain is powered on again. We expose these two clocks in the DT bindings so that the DT node of the power domain can reference them. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* | | clk: samsung: exynos7: Staticize file scope symbolsStephen Boyd2015-10-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/clk/samsung/clk-exynos7.c:896:33: warning: symbol 'fixed_rate_clks_fsys0' was not declared. Should it be static? drivers/clk/samsung/clk-exynos7.c:1010:33: warning: symbol 'fixed_rate_clks_fsys1' was not declared. Should it be static? Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* | | Merge tag 'clk-samsung-4.4' of git://linuxtv.org/snawrocki/samsung into clk-nextStephen Boyd2015-10-02
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull updates from Sylwester Nawrocki: "Fixes, improvements and addition of some missing features of the exynos7 clock controller driver." * tag 'clk-samsung-4.4' of git://linuxtv.org/snawrocki/samsung: clk: samsung: exynos7: Add required clock tree for UFS clk: samsung: exynos7: Add missing fixed_clks to cmu_info clk: samsung: exynos7: Correct CMU_FSYS1 clocks names clk: samsung: exynos7: Correct CMU_FSYS0 clocks names clk: samsung: exynos7: Correct CMU_PERIS clocks names clk: samsung: exynos7: Correct CMU_PERIC1 clocks names clk: samsung: exynos7: Correct CMU_PERIC0 clocks names clk: samsung: exynos7: Correct CMU_CCORE clocks names clk: samsung: exynos7: Correct CMU_TOP1 clocks names clk: samsung: exynos7: Correct CMU_TOP0 clocks names clk: samsung: exynos7: Adds missing clocks gates of CMU_TOPC clk: samsung: exynos7: Change the CMU_TOPC block clock names clk: samsung: exynos7: Correct nr_clk_ids for fsys1 clk: samsung: exynos7: Correct nr_clk_ids for fsys0 clk: samsung: exynos7: Fix CMU TOP1 block clk: samsung: exynos7: Fix CMU TOPC block clock
| * | | clk: samsung: exynos7: Add required clock tree for UFSAlim Akhtar2015-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding required mux/div/gate clocks for UFS controller present on Exynos7. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
| * | | clk: samsung: exynos7: Add missing fixed_clks to cmu_infoAlim Akhtar2015-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FSYS0 fixed clocks are not added to fsys0_cmu_info, this makes some of the usb clocks orphans. This fixes the same. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
| * | | clk: samsung: exynos7: Correct CMU_FSYS1 clocks namesAlim Akhtar2015-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch renames CMU_FSYS1 clocks names to match with user manual. And also adds missing gate clock for aclk_fsys1_200. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
| * | | clk: samsung: exynos7: Correct CMU_FSYS0 clocks namesAlim Akhtar2015-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch renames CMU_FSYS0 clocks names to match with user manual. And also adds missing gate clock for aclk_fsys0_200. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
| * | | clk: samsung: exynos7: Correct CMU_PERIS clocks namesAlim Akhtar2015-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch renames CMU_PERIS clocks names to match with user manual. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
| * | | clk: samsung: exynos7: Correct CMU_PERIC1 clocks namesAlim Akhtar2015-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch renames CMU_PERIC1 clocks names to match with user manual. And also adds missing gate clock for aclk_peric1_66. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
| * | | clk: samsung: exynos7: Correct CMU_PERIC0 clocks namesAlim Akhtar2015-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch renames CMU_PERIC0 clocks names to match with user manual. And also adds missing gate clock for aclk_peric0_66. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
| * | | clk: samsung: exynos7: Correct CMU_CCORE clocks namesAlim Akhtar2015-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch renames CMU_CCORE clocks names to match with user manual. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
| * | | clk: samsung: exynos7: Correct CMU_TOP1 clocks namesAlim Akhtar2015-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch renames CMU_TOP1 clocks names to match with user manual. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
| * | | clk: samsung: exynos7: Correct CMU_TOP0 clocks namesAlim Akhtar2015-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch renames CMU_TOP0 clocks names to match with user manual. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
| * | | clk: samsung: exynos7: Adds missing clocks gates of CMU_TOPCAlim Akhtar2015-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds some of the missing GATE clocks of CMU_TOPC block. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
| * | | clk: samsung: exynos7: Change the CMU_TOPC block clock namesAlim Akhtar2015-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Corrects the CMU_TOPC block clock names as per user manual. This does not change any functionalities. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
| * | | clk: samsung: exynos7: Correct nr_clk_ids for fsys1Alim Akhtar2015-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nr_clk_ids for FSYS1 block is wrongly set as TOP1 block, this patch corrects it. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
| * | | clk: samsung: exynos7: Correct nr_clk_ids for fsys0Alim Akhtar2015-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch corrects the nr_clk_ids for fsys0 block which is wrongly set to number of clocks of the TOP1 CMU. This also adjusts the gate clocks order. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
| * | | clk: samsung: exynos7: Fix CMU TOP1 blockAlim Akhtar2015-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per UM, sclk_mmc2 is bit 16 of SEL_TOP1_FSYS0. Also the DIV and the GATE clocks are at bit 16 in their respective registers. For mmc1 and mmc0 clock MUXs are in TOP1_FSYS11 instead of TOP1_FSYS1. And their DIV and GATE clks are in xxx_TOP1_FSYS11 instead of TOP1_FSYS1. This patch corrects it. This also adds xxx_FSYS11 to be saved/restore during s2r cycles. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
| * | | clk: samsung: exynos7: Fix CMU TOPC block clockAlim Akhtar2015-09-15
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | Corrects the bit width of DIV_TOPC3 register. These are wrongly set to 3 which should be 4 bit wide as per UM. This also adjusts the MUX clock order. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
* | | Merge branch 'clk-fixes' into clk-nextStephen Boyd2015-09-22
|\ \ \ | |/ / |/| / | |/ | | * clk-fixes: clk: samsung: fix cpu clock's flags checking
| * clk: samsung: fix cpu clock's flags checkingBartlomiej Zolnierkiewicz2015-09-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CLK_CPU_HAS_DIV1 and CLK_CPU_NEEDS_DEBUG_ALT_DIV masks were incorrectly used as a bit numbers. Fix it. Tested on Exynos4210 based Origen board and on Exynos5250 based Arndale board. Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Thomas Abraham <thomas.ab@samsung.com> Fixes: ddeac8d96 ("clk: samsung: add infrastructure to register cpu clocks") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* | Merge tag 'armsoc-late' of ↵Linus Torvalds2015-09-10
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM SoC updates from Kevin Hilman: "This is a collection of a few late fixes and other misc stuff that had dependencies on things being merged from other trees. The bulk of the changes are for samsung/exynos SoCs for some changes that needed a few minor reworks so ended up a bit late. The others are mainly for qcom SoCs: a couple fixes and some DTS updates" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) ARM: multi_v7_defconfig: Enable PBIAS regulator soc: qcom: smd: Correct fBLOCKREADINTR handling soc: qcom: smd: Use correct remote processor ID soc: qcom: smem: Fix errant private access ARM: dts: qcom: msm8974-sony-xperia-honami: Use stdout-path ARM: dts: qcom: msm8960-cdp: Use stdout-path ARM: dts: qcom: msm8660-surf: Use stdout-path ARM: dts: qcom: ipq8064-ap148: Use stdout-path ARM: dts: qcom: apq8084-mtp: Use stdout-path ARM: dts: qcom: apq8084-ifc6540: Use stdout-path ARM: dts: qcom: apq8074-dragonboard: Use stdout-path ARM: dts: qcom: apq8064-ifc6410: Use stdout-path ARM: dts: qcom: apq8064-cm-qs600: Use stdout-path ARM: dts: qcom: Label serial nodes for aliasing and stdout-path reset: ath79: Fix missing spin_lock_init reset: Add (devm_)reset_control_get stub functions ARM: EXYNOS: switch to using generic cpufreq driver for exynos4x12 cpufreq: exynos: Remove unselectable rule for arm-exynos-cpufreq.o ARM: dts: add iommu property to JPEG device for exynos4 ARM: dts: enable SPI1 for exynos4412-odroidu3 ...
| * clk: exynos4x12: add cpu clock configuration data and instantiate cpu clockBartlomiej Zolnierkiewicz2015-08-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the addition of the new Samsung specific cpu-clock type, the arm clock can be represented as a cpu-clock type. Add the CPU clock configuration data and instantiate the CPU clock type for Exynos4x12. Based on the earlier work by Thomas Abraham. Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* | clk: s5pv210: add missing call to samsung_clk_of_add_provider()Marek Szyprowski2015-08-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit d5e136a21b2028fb1f45143ea7112d5869bfc6c7 ("clk: samsung: Register clk provider only after registering its all clocks", merged to v3.17-rc1) modified a way that driver registers registers to core framework. This change has not been applied to s5pv210 clocks driver, which has been merged in parallel to that commit. This patch adds a missing call to samsung_clk_of_add_provider(), so the driver is operational again. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> CC: stable@vger.kernel.org # v3.17+ Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
* | clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw)Stephen Boyd2015-08-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the provider based method to get a clock's name so that we can get rid of the clk member in struct clk_hw one day. Mostly converted with the following coccinelle script. @@ struct clk_hw *E; @@ -__clk_get_name(E->clk) +clk_hw_get_name(E) Acked-by: Heiko Stuebner <heiko@sntech.de> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Bresticker <abrestic@chromium.org> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kevin Cernekee <cernekee@chromium.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* | clk: samsung: Convert to clk_hw based provider APIsStephen Boyd2015-08-24
| | | | | | | | | | | | | | | | | | | | | | We're removing struct clk from the clk provider API, so switch this code to using the clk_hw based provider APIs. Cc: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* | clk: Replace __clk_get_num_parents with clk_hw_get_num_parents()Stephen Boyd2015-08-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mostly converted with the following semantic patch: @@ struct clk_hw *E; @@ -__clk_get_num_parents(E->clk) +clk_hw_get_num_parents(E) Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Chao Xie <chao.xie@marvell.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: "Emilio López" <emilio@elopez.com.ar> Acked-by: Tero Kristo <t-kristo@ti.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* | clk: exynos4: Fix wrong clock for Exynos4x12 ADCKrzysztof Kozlowski2015-07-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TSADC gate clock was used in Exynos4x12 DTSI for exynos-adc driver. However TSADC is present only on Exynos4210 so on Trats2 board (with Exynos4412 SoC) the exynos-adc driver could not be probed: ERROR: could not get clock /adc@126C0000:adc(0) exynos-adc 126c0000.adc: failed getting clock, err = -2 exynos-adc: probe of 126c0000.adc failed with error -2 Instead on Exynos4x12 SoCs the main clock used by Analog to Digital Converter is located in different register and it is named in datasheet as PCLK_ADC. Regardless of the name the purpose of this PCLK_ADC clock is the same as purpose of TSADC from Exynos4210. The patch adds gate clock for Exynos4x12 using the proper register so backward compatibility is preserved. This fixes the probe of exynos-adc driver on Exynos4x12 boards and allows accessing sensors connected to it on Trats2 board (ntc,ncp15wb473 AP and battery thermistors). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: <stable@vger.kernel.org> Fixes: c63c57433003 ("ARM: dts: Add ADC's dt data to read raw data for exynos4x12") Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* | Merge branch 'v4.3-topic/clk-samsung' of ↵Michael Turquette2015-07-28
|\| | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into clk-next
| * clk: exynos3250: Add cpu clock configuration data and instaniate cpu clockChanwoo Choi2015-07-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add CPU clock configuration data and instantiate the CPU clock type for Exynos3250 to support Samsung specific cpu-clock type. Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| * clk: exynos5250: add cpu clock configuration data and instantiate cpu clockThomas Abraham2015-07-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the addition of the new Samsung specific cpu-clock type, the arm clock can be represented as a cpu-clock type. Add the CPU clock configuration data and instantiate the CPU clock type for Exynos5250. Cc: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> [b.zolnierkie: split exynos5250 support from the original patch] [b.zolnierkie: moved E5250_CPU_DIV[0,1] macros to clk-exynos5250.c] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Tested-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* | clk: samsung: Properly include clk.h and clkdev.hStephen Boyd2015-07-20
|/ | | | | | | | | | | | | | Clock provider drivers generally shouldn't include clk.h because it's the consumer API. Only include clk.h in files that are using it. The clkdev.h header isn't always used either, so remove it and add in slab.h where files were relying on it to include slab for them. Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* Merge branch 'clk-exynos-cpu-clk' into clk-nextMichael Turquette2015-06-20
|\ | | | | | | | | Folded into this merge commit is a build error fix: s/clk/core in clk_change_rate due to the new struct clk_core
| * clk: samsung: exynos4: add cpu clock configuration data and instantiate cpu ↵Thomas Abraham2015-06-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clock With the addition of the new Samsung specific cpu-clock type, the arm clock can be represented as a cpu-clock type. Add the CPU clock configuration data and instantiate the CPU clock type for Exynos4210. Changes by Bartlomiej: - fixed issue with wrong dividers being setup by Common Clock Framework (by an addition of CLK_RECALC_NEW_RATES clock flag to mout_apll clock, without this change cpufreq-dt driver showed ~10 mA larger energy consumption when compared to cpufreq-exynos one when "performance" cpufreq governor was used on Exynos4210 SoC based Origen board), this was probably meant to be workarounded by use of CLK_GET_RATE_NOCACHE and CLK_DIVIDER_READ_ONLY clock flags in the original patchset (in "[PATCH v12 6/6] clk: samsung: remove unused clock aliases and update clock flags") but using these flags is not sufficient to fix the issue observed - removed Exynos5250 and Exynos5420 support for now Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
| * clk: samsung: add infrastructure to register cpu clocksThomas Abraham2015-06-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CPU clock provider supplies the clock to the CPU clock domain. The composition and organization of the CPU clock provider could vary among Exynos SoCs. A CPU clock provider can be composed of clock mux, dividers and gates. This patch defines a new clock type for CPU clock provider and adds infrastructure to register the CPU clock providers for Samsung platforms. Changes by Bartlomiej: - fixed issue with setting lower dividers before the parent clock speed was lowered (the issue resulted in lockup on Exynos4210 SoC based Origen board when "ondemand" cpufreq governor was stress tested) - fixed missing spin_unlock on error in exynos_cpuclk_post_rate_change() problem by moving cfg_data search outside of the spin locked area - removed leftover kfree() in exynos_register_cpu_clock() that could result in dereferencing the NULL pointer on error - moved spin_lock earlier in exynos_cpuclk_pre_rate_change() to cover reading of E4210_SRC_CPU and E4210_DIV_CPU1 registers - added missing "last chance" checks to wait_until_divider_stable() and wait_until_mux_stable() (needed in case that IRQ handling took long time to proceed and resulted in function printing incorrect error message about timeout) - moved E4210_CPU_DIV[0,1]() macros just before their only users, this resulted in moving them from patch #2 to patch #3/6 ("clk: samsung: exynos4: add cpu clock configuration data and instantiate cpu clock") - removed E5250_CPU_DIV[0,1](), E5420_EGL_DIV0() and E5420_KFC_DIV() macros for now - added my Copyrights to drivers/clk/samsung/clk-cpu.c Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
generated by cgit v1.2.3 (git 2.25.1) at 2026-01-27 23:42:36 +0000