diff options
| -rw-r--r-- | arch/arm/boot/dts/qcom/vplatform-lfv-msm8996-ivi-la.dts | 126 |
1 files changed, 126 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom/vplatform-lfv-msm8996-ivi-la.dts b/arch/arm/boot/dts/qcom/vplatform-lfv-msm8996-ivi-la.dts index 699acfc054e2..3c2ee294ce11 100644 --- a/arch/arm/boot/dts/qcom/vplatform-lfv-msm8996-ivi-la.dts +++ b/arch/arm/boot/dts/qcom/vplatform-lfv-msm8996-ivi-la.dts @@ -130,3 +130,129 @@ &blsp1_uart2 { status = "okay"; }; + +&pm8994_gpios { + gpio@c600 { /* GPIO 7 - adv7481 INT3 */ + qcom,mode = <0>; + qcom,vin-sel = <2>; + qcom,src-sel = <0>; + status = "okay"; + }; + + gpio@c800 { /* GPIO 9 - Rome 3.3V control */ + qcom,mode = <1>; /* Digital output */ + qcom,output-type = <0>; /* MOS logic */ + qcom,invert = <1>; /* Output high */ + qcom,vin-sel = <0>; /* VPH_PWR */ + qcom,src-sel = <0>; /* Constant */ + qcom,out-strength = <1>; /* High drive strength */ + qcom,master-en = <1>; /* Enable GPIO */ + status = "okay"; + }; + + gpio@c900 { /* GPIO 10 - NFC CLK _REQ*/ + qcom,mode = <0>; + qcom,vin-sel = <2>; + qcom,src-sel = <0>; + qcom,master-en = <1>; + status = "okay"; + }; + + gpio@cd00 { /* GPIO 14 - lcd_bklt_reg_en */ + qcom,mode = <1>; /* DIGITAL OUT */ + qcom,output-type = <0>; /* CMOS logic */ + qcom,invert = <1>; /* output hight initially */ + qcom,vin-sel = <2>; /* 1.8 */ + qcom,src-sel = <0>; /* CONSTANT */ + qcom,out-strength = <1>; /* Low drive strength */ + qcom,master-en = <1>; /* ENABLE GPIO */ + status = "okay"; + }; + gpio@c100 { /* GPIO 2 */ + qcom,mode = <0>; + qcom,pull = <0>; + qcom,vin-sel = <2>; + qcom,src-sel = <0>; + status = "okay"; + }; + gpio@c300 { /* GPIO 4 - adv7481 RST */ + qcom,mode = <1>; + qcom,pull = <0>; + qcom,vin-sel = <2>; + qcom,src-sel = <0>; + status = "okay"; + }; + + gpio@c400 { /* GPIO 5 - adv7481 INT1 */ + qcom,mode = <0>; + qcom,vin-sel = <2>; + qcom,src-sel = <0>; + status = "okay"; + }; + + gpio@c500 { /* GPIO 6 - adv7481 INT2*/ + qcom,mode = <0>; + qcom,vin-sel = <2>; + qcom,src-sel = <0>; + status = "okay"; + }; + + gpio@ca00 { /* GPIO 11 - USB enb1 (otg switch) */ + qcom,mode = <1>; /* DIGITAL OUT */ + qcom,vin-sel = <2>; /* 1.8 */ + qcom,src-sel = <0>; /* GPIO */ + qcom,master-en = <1>; /* Enable GPIO */ + status = "okay"; + }; + + gpio@cc00 { /* GPIO 13 - NTN_RST */ + qcom,mode = <1>; /* DIGITAL OUT */ + qcom,output-type = <0>; /* CMOS logic */ + qcom,pull = <5>; + qcom,vin-sel = <2>; /* 1.8 */ + qcom,out-strength = <1>; + qcom,src-sel = <0>; /* GPIO */ + qcom,master-en = <1>; /* Enable GPIO */ + status = "okay"; + }; + + gpio@ce00 { /* GPIO 15 */ + qcom,mode = <1>; + qcom,output-type = <0>; + qcom,pull = <5>; + qcom,vin-sel = <2>; + qcom,out-strength = <1>; + qcom,src-sel = <2>; + qcom,master-en = <1>; + status = "okay"; + }; + gpio@d000 { /* GPIO 17 - USB1 VBUS detect */ + qcom,mode = <0>; /* Digital Input*/ + qcom,pull = <5>; /* No pull */ + qcom,vin-sel = <2>; /* 1.8 V */ + qcom,src-sel = <0>; /* GPIO */ + qcom,master-en = <1>; /* Enable GPIO */ + status = "okay"; + }; + + gpio@d100 { /* GPIO 18 - Rome Sleep Clock */ + qcom,mode = <1>; /* Digital output */ + qcom,output-type = <0>; /* CMOS logic */ + qcom,invert = <0>; /* Output low initially */ + qcom,vin-sel = <2>; /* VIN 2 */ + qcom,src-sel = <3>; /* Function 2 */ + qcom,out-strength = <2>; /* Medium */ + qcom,master-en = <1>; /* Enable GPIO */ + status = "okay"; + }; + + gpio@d200 { /* GPIO 19 - Rome BT Reset */ + qcom,mode = <1>; /* Digital output*/ + qcom,pull = <4>; /* Pulldown 10uA */ + qcom,vin-sel = <2>; /* VIN2 */ + qcom,src-sel = <0>; /* GPIO */ + qcom,invert = <0>; /* Invert */ + qcom,master-en = <1>; /* Enable GPIO */ + status = "okay"; + }; +}; |