diff options
| -rw-r--r-- | core/hdd/inc/wlan_hdd_cfg.h | 258 |
1 files changed, 243 insertions, 15 deletions
diff --git a/core/hdd/inc/wlan_hdd_cfg.h b/core/hdd/inc/wlan_hdd_cfg.h index 98f866cd49f2..6e613c9156b3 100644 --- a/core/hdd/inc/wlan_hdd_cfg.h +++ b/core/hdd/inc/wlan_hdd_cfg.h @@ -3268,31 +3268,160 @@ typedef enum { eHDD_LINK_SPEED_REPORT_MAX = 1, eHDD_LINK_SPEED_REPORT_MAX_SCALED = 2, } eHddLinkSpeedReportType; + +/* + * <ini> + * gVhtChannelWidth - Channel width capability for 11ac + * @Min: 0 + * @Max: 4 + * @Default: 3 + * + * This ini is used to set channel width capability for 11AC. + * eHT_CHANNEL_WIDTH_20MHZ = 0, + * eHT_CHANNEL_WIDTH_40MHZ = 1, + * eHT_CHANNEL_WIDTH_80MHZ = 2, + * eHT_CHANNEL_WIDTH_160MHZ = 3, + * eHT_CHANNEL_WIDTH_80P80MHZ = 4, + * + * Related: NA + * + * Supported Feature: 11AC + * + * Usage: External + * + * </ini> + */ #define CFG_VHT_CHANNEL_WIDTH "gVhtChannelWidth" #define CFG_VHT_CHANNEL_WIDTH_MIN (0) #define CFG_VHT_CHANNEL_WIDTH_MAX (4) #define CFG_VHT_CHANNEL_WIDTH_DEFAULT (3) +/* +* <ini> +* gVhtRxMCS - VHT Rx MCS capability for 1x1 mode +* @Min: 0 +* @Max: 2 +* @Default: 0 +* +* This ini is used to set VHT Rx MCS capability for 1x1 mode. +* 0, MCS0-7 +* 1, MCS0-8 +* 2, MCS0-9 +* +* Related: NA +* +* Supported Feature: 11AC +* +* Usage: Internal/External +* +* </ini> +*/ + #define CFG_VHT_ENABLE_RX_MCS_8_9 "gVhtRxMCS" #define CFG_VHT_ENABLE_RX_MCS_8_9_MIN (0) #define CFG_VHT_ENABLE_RX_MCS_8_9_MAX (2) #define CFG_VHT_ENABLE_RX_MCS_8_9_DEFAULT (0) +/* + * <ini> + * gVhtTxMCS - VHT Tx MCS capability for 1x1 mode + * @Min: 0 + * @Max: 2 + * @Default: 0 + * + * This ini is used to set VHT Tx MCS capability for 1x1 mode. + * 0, MCS0-7 + * 1, MCS0-8 + * 2, MCS0-9 + * + * Related: NA + * + * Supported Feature: 11AC + * + * Usage: Internal/External + * + * </ini> + */ + #define CFG_VHT_ENABLE_TX_MCS_8_9 "gVhtTxMCS" #define CFG_VHT_ENABLE_TX_MCS_8_9_MIN (0) #define CFG_VHT_ENABLE_TX_MCS_8_9_MAX (2) #define CFG_VHT_ENABLE_TX_MCS_8_9_DEFAULT (0) +/* + * <ini> + * gVhtRxMCS2x2 - VHT Rx MCS capability for 2x2 mode + * @Min: 0 + * @Max: 2 + * @Default: 0 + * + * This ini is used to set VHT Rx MCS capability for 2x2 mode. + * 0, MCS0-7 + * 1, MCS0-8 + * 2, MCS0-9 + * + * Related: NA + * + * Supported Feature: 11AC + * + * Usage: External + * + * </ini> + */ + #define CFG_VHT_ENABLE_RX_MCS2x2_8_9 "gVhtRxMCS2x2" #define CFG_VHT_ENABLE_RX_MCS2x2_8_9_MIN (0) #define CFG_VHT_ENABLE_RX_MCS2x2_8_9_MAX (2) #define CFG_VHT_ENABLE_RX_MCS2x2_8_9_DEFAULT (0) +/* + * <ini> + * gVhtTxMCS2x2 - VHT Tx MCS capability for 2x2 mode + * @Min: 0 + * @Max: 2 + * @Default: 0 + * + * This ini is used to set VHT Tx MCS capability for 2x2 mode. + * 0, MCS0-7 + * 1, MCS0-8 + * 2, MCS0-9 + * + * Related: NA + * + * Supported Feature: 11AC + * + * Usage: External + * + * </ini> + */ + #define CFG_VHT_ENABLE_TX_MCS2x2_8_9 "gVhtTxMCS2x2" #define CFG_VHT_ENABLE_TX_MCS2x2_8_9_MIN (0) #define CFG_VHT_ENABLE_TX_MCS2x2_8_9_MAX (2) #define CFG_VHT_ENABLE_TX_MCS2x2_8_9_DEFAULT (0) +/* + * <ini> + * gEnable2x2 - Enables/disables VHT Tx/Rx MCS values for 2x2 + * @Min: 0 + * @Max: 1 + * @Default: 0 + * + * This ini disables/enables 2x2 mode. If this is zero then DUT operates as + * 1x1. + * + * 0, Disable. + * 1, Enable + * + * Related: NA + * + * Supported Feature: 11AC + * + * Usage: External + * + * </ini> + */ + #define CFG_VHT_ENABLE_2x2_CAP_FEATURE "gEnable2x2" #define CFG_VHT_ENABLE_2x2_CAP_FEATURE_MIN (0) #define CFG_VHT_ENABLE_2x2_CAP_FEATURE_MAX (1) @@ -3300,20 +3429,21 @@ typedef enum { /* * <ini> - * gStaPrefer80MHzOver160MHz - Set prefer range for sta + * gStaPrefer80MHzOver160MHz - set Sta perferance to connect in 80HZ/160HZ * @Min: 0 * @Max: 1 * @Default: 1 * - * This ini is used to set default range for sta + * This ini is used to set Sta perferance to connect in 80HZ/160HZ + * * 0 - Connects in 160MHz 1x1 when AP is 160MHz 2x2 * 1 - Connects in 80MHz 2x2 when AP is 160MHz 2x2 * - * Related: None + * Related: NA * - * Supported Feature: STA + * Supported Feature: 11AC * - * Usage: Internal/External + * Usage: External * * </ini> */ @@ -3325,12 +3455,27 @@ typedef enum { /* * <ini> - * gVdevTypeNss_2g - Select the value for each two bit configuration + * gVdevTypeNss_2g - set Number of streams per VDEV for 2G band. * @Min: 0x5555 * @Max: 0xAAAA * @Default: 0xAAAA * - * This ini is used to set NSS cfg bit in 2g definition. + * This ini is used to set Number of streams per VDEV for 2G band + * + * These Nss parameters will have 32-bit configuration value, 2 bits are + * allocated for each vdev. + * Valid values are: + * Min value – 0x5555 + * Max value – 0xAAAA + * Default value will be 0xAAAA for both the parameters. + * Value 0x5555 will configure all vdevs in 1x1 mode in 2.4G band. + * Value 0xAAAA will configure all vdevs in 2x2 mode in 2.4G band. + * + * The max value is defined based on the valid max Nss of the vdev, the valid + * values for each vdev 2-bits are 0x1 and 0x2. 0x3 and 0x0 are not valid vdev + * Nss values. + * + * NSS cfg bit definition. * STA BIT[0:1] * SAP BIT[2:3] * P2P_GO BIT[4:5] @@ -3340,11 +3485,11 @@ typedef enum { * P2P_DEVICE BIT[12:13] * OCB BIT[14:15] * - * Related: None + * Related: NA * - * Supported Feature: STA + * Supported Feature: Antenna Sharing * - * Usage: Internal/External + * Usage: External * * </ini> */ @@ -3356,12 +3501,27 @@ typedef enum { /* * <ini> - * gVdevTypeNss_5g - Select the value for each two bit configuration + * gVdevTypeNss_5g - set Number of streams per VDEV for 5G band. * @Min: 0x5555 * @Max: 0xAAAA * @Default: 0xAAAA * - * This ini is used to set NSS cfg bit in 5g definition + * This ini is used to set Number of streams per VDEV for 5G band + * + * These Nss parameters will have 32-bit configuration value, 2 bits are + * allocated for each vdev. + * Valid values are: + * Min value – 0x5555 + * Max value – 0xAAAA + * Default value will be 0xAAAA for both the parameters. + * Value 0x5555 will configure all vdevs in 1x1 mode in 5 band. + * Value 0xAAAA will configure all vdevs in 2x2 mode in 5 band. + * + * The max value is defined based on the valid max Nss of the vdev, the valid + * values for each vdev 2-bits are 0x1 and 0x2. 0x3 and 0x0 are not valid vdev + * Nss values. + * + * NSS cfg bit definition. * STA BIT[0:1] * SAP BIT[2:3] * P2P_GO BIT[4:5] @@ -3371,11 +3531,11 @@ typedef enum { * P2P_DEVICE BIT[12:13] * OCB BIT[14:15] * - * Related: None + * Related: NA * - * Supported Feature: STA + * Supported Feature: Antenna Sharing * - * Usage: Internal/External + * Usage: External * * </ini> */ @@ -3385,6 +3545,28 @@ typedef enum { #define CFG_VDEV_TYPE_NSS_5G_MAX (0xAAAA) #define CFG_VDEV_TYPE_NSS_5G_DEFAULT (0xAAAA) +/* + * <ini> + * gEnableMuBformee - Enables/disables multi-user (MU) beam formee capability + * @Min: 0 + * @Max: 1 + * @Default: 0 + * + * This ini enables/disables multi-user (MU) beam formee + * capability + * + * Change MU Bformee only when gTxBFEnable is enabled. + * When gTxBFEnable and gEnableMuBformee are set, MU beam formee capability is + * enabled. + * Related: gTxBFEnable + * + * Supported Feature: 11AC + * + * Usage: External + * + * </ini> + */ + #define CFG_VHT_ENABLE_MU_BFORMEE_CAP_FEATURE "gEnableMuBformee" #define CFG_VHT_ENABLE_MU_BFORMEE_CAP_FEATURE_MIN (0) #define CFG_VHT_ENABLE_MU_BFORMEE_CAP_FEATURE_MAX (1) @@ -3400,11 +3582,57 @@ typedef enum { #define CFG_VHT_ENABLE_GID_FEATURE_MAX (1) #define CFG_VHT_ENABLE_GID_FEATURE_DEFAULT (0) +/* + * <ini> + * gSetTxChainmask1x1 - sets Transmit chain mask. + * @Min: 1 + * @Max: 2 + * @Default: 1 + * + * This ini sets Transmit chain mask. + * + * If gEnable2x2 is disabled, gSetTxChainmask1x1 and gSetRxChainmask1x1 values + * are taken into account. If chainmask value exceeds the maximum number of + * chains supported by target, the max number of chains is used. By default, + * chain0 is selected for both Tx and Rx. + * gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0. + * gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1. + * + * Supported Feature: 11AC + * + * Usage: External + * + * </ini> + */ + #define CFG_VHT_ENABLE_1x1_TX_CHAINMASK "gSetTxChainmask1x1" #define CFG_VHT_ENABLE_1x1_TX_CHAINMASK_MIN (1) #define CFG_VHT_ENABLE_1x1_TX_CHAINMASK_MAX (2) #define CFG_VHT_ENABLE_1x1_TX_CHAINMASK_DEFAULT (1) +/* + * <ini> + * gSetRxChainmask1x1 - Sets Receive chain mask. + * @Min: 1 + * @Max: 2 + * @Default: 1 + * + * This ini is used to set Receive chain mask. + * + * If gEnable2x2 is disabled, gSetTxChainmask1x1 and gSetRxChainmask1x1 values + * are taken into account. If chainmask value exceeds the maximum number of + * chains supported by target, the max number of chains is used. By default, + * chain0 is selected for both Tx and Rx. + * gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0. + * gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1. + * + * Supported Feature: 11AC + * + * Usage: External + * + * </ini> + */ + #define CFG_VHT_ENABLE_1x1_RX_CHAINMASK "gSetRxChainmask1x1" #define CFG_VHT_ENABLE_1x1_RX_CHAINMASK_MIN (1) #define CFG_VHT_ENABLE_1x1_RX_CHAINMASK_MAX (2) |