diff options
| -rw-r--r-- | drivers/power/supply/qcom/qpnp-smb2.c | 2 | ||||
| -rw-r--r-- | drivers/power/supply/qcom/smb-lib.c | 48 | ||||
| -rw-r--r-- | drivers/power/supply/qcom/smb-lib.h | 1 |
3 files changed, 32 insertions, 19 deletions
diff --git a/drivers/power/supply/qcom/qpnp-smb2.c b/drivers/power/supply/qcom/qpnp-smb2.c index b51ce758a16b..773e8b00c1c0 100644 --- a/drivers/power/supply/qcom/qpnp-smb2.c +++ b/drivers/power/supply/qcom/qpnp-smb2.c @@ -1615,7 +1615,7 @@ static int smb2_chg_config_init(struct smb2 *chip) switch (pmic_rev_id->pmic_subtype) { case PMI8998_SUBTYPE: chip->chg.smb_version = PMI8998_SUBTYPE; - chip->chg.wa_flags |= BOOST_BACK_WA; + chip->chg.wa_flags |= BOOST_BACK_WA | QC_AUTH_INTERRUPT_WA_BIT; if (pmic_rev_id->rev4 == PMI8998_V1P1_REV4) /* PMI rev 1.1 */ chg->wa_flags |= QC_CHARGER_DETECTION_WA_BIT; if (pmic_rev_id->rev4 == PMI8998_V2P0_REV4) /* PMI rev 2.0 */ diff --git a/drivers/power/supply/qcom/smb-lib.c b/drivers/power/supply/qcom/smb-lib.c index 33339588599e..e25da28bf76e 100644 --- a/drivers/power/supply/qcom/smb-lib.c +++ b/drivers/power/supply/qcom/smb-lib.c @@ -633,11 +633,15 @@ static void smblib_uusb_removal(struct smb_charger *chg) cancel_delayed_work_sync(&chg->hvdcp_detect_work); - /* reset AUTH_IRQ_EN_CFG_BIT */ - rc = smblib_masked_write(chg, USBIN_SOURCE_CHANGE_INTRPT_ENB_REG, - AUTH_IRQ_EN_CFG_BIT, AUTH_IRQ_EN_CFG_BIT); - if (rc < 0) - smblib_err(chg, "Couldn't enable QC auth setting rc=%d\n", rc); + if (chg->wa_flags & QC_AUTH_INTERRUPT_WA_BIT) { + /* re-enable AUTH_IRQ_EN_CFG_BIT */ + rc = smblib_masked_write(chg, + USBIN_SOURCE_CHANGE_INTRPT_ENB_REG, + AUTH_IRQ_EN_CFG_BIT, AUTH_IRQ_EN_CFG_BIT); + if (rc < 0) + smblib_err(chg, + "Couldn't enable QC auth setting rc=%d\n", rc); + } /* reconfigure allowed voltage for HVDCP */ rc = smblib_write(chg, USBIN_ADAPTER_ALLOW_CFG_REG, @@ -3019,14 +3023,18 @@ static void smblib_handle_hvdcp_3p0_auth_done(struct smb_charger *chg, if (!rising) return; - /* - * Disable AUTH_IRQ_EN_CFG_BIT to receive adapter voltage - * change interrupt. - */ - rc = smblib_masked_write(chg, USBIN_SOURCE_CHANGE_INTRPT_ENB_REG, - AUTH_IRQ_EN_CFG_BIT, 0); - if (rc < 0) - smblib_err(chg, "Couldn't enable QC auth setting rc=%d\n", rc); + if (chg->wa_flags & QC_AUTH_INTERRUPT_WA_BIT) { + /* + * Disable AUTH_IRQ_EN_CFG_BIT to receive adapter voltage + * change interrupt. + */ + rc = smblib_masked_write(chg, + USBIN_SOURCE_CHANGE_INTRPT_ENB_REG, + AUTH_IRQ_EN_CFG_BIT, 0); + if (rc < 0) + smblib_err(chg, + "Couldn't enable QC auth setting rc=%d\n", rc); + } if (chg->mode == PARALLEL_MASTER) vote(chg->pl_enable_votable_indirect, USBIN_V_VOTER, true, 0); @@ -3184,11 +3192,15 @@ static void typec_source_removal(struct smb_charger *chg) cancel_delayed_work_sync(&chg->hvdcp_detect_work); - /* reset AUTH_IRQ_EN_CFG_BIT */ - rc = smblib_masked_write(chg, USBIN_SOURCE_CHANGE_INTRPT_ENB_REG, - AUTH_IRQ_EN_CFG_BIT, AUTH_IRQ_EN_CFG_BIT); - if (rc < 0) - smblib_err(chg, "Couldn't enable QC auth setting rc=%d\n", rc); + if (chg->wa_flags & QC_AUTH_INTERRUPT_WA_BIT) { + /* re-enable AUTH_IRQ_EN_CFG_BIT */ + rc = smblib_masked_write(chg, + USBIN_SOURCE_CHANGE_INTRPT_ENB_REG, + AUTH_IRQ_EN_CFG_BIT, AUTH_IRQ_EN_CFG_BIT); + if (rc < 0) + smblib_err(chg, + "Couldn't enable QC auth setting rc=%d\n", rc); + } /* reconfigure allowed voltage for HVDCP */ rc = smblib_write(chg, USBIN_ADAPTER_ALLOW_CFG_REG, diff --git a/drivers/power/supply/qcom/smb-lib.h b/drivers/power/supply/qcom/smb-lib.h index b2cfeeda5792..bf2d863933ae 100644 --- a/drivers/power/supply/qcom/smb-lib.h +++ b/drivers/power/supply/qcom/smb-lib.h @@ -77,6 +77,7 @@ enum { QC_CHARGER_DETECTION_WA_BIT = BIT(0), BOOST_BACK_WA = BIT(1), TYPEC_CC2_REMOVAL_WA_BIT = BIT(2), + QC_AUTH_INTERRUPT_WA_BIT = BIT(3), }; enum smb_irq_index { |