diff options
| -rw-r--r-- | core/hdd/src/wlan_hdd_ioctl.c | 197 |
1 files changed, 98 insertions, 99 deletions
diff --git a/core/hdd/src/wlan_hdd_ioctl.c b/core/hdd/src/wlan_hdd_ioctl.c index f18729b92456..27e417e72f60 100644 --- a/core/hdd/src/wlan_hdd_ioctl.c +++ b/core/hdd/src/wlan_hdd_ioctl.c @@ -299,7 +299,7 @@ static int hdd_parse_setrmcenable_command(uint8_t *pValue, *pRmcEnable = tempInt; - hdd_info("ucRmcEnable: %d", *pRmcEnable); + hdd_debug("ucRmcEnable: %d", *pRmcEnable); return 0; } @@ -344,7 +344,7 @@ static int hdd_parse_setrmcactionperiod_command(uint8_t *pValue, *pActionPeriod = tempInt; - hdd_info("uActionPeriod: %d", *pActionPeriod); + hdd_debug("uActionPeriod: %d", *pActionPeriod); return 0; } @@ -410,7 +410,7 @@ static int hdd_parse_setrmcrate_command(uint8_t *pValue, break; } - hdd_info("Rate: %d", *pRate); + hdd_debug("Rate: %d", *pRate); return 0; } @@ -433,10 +433,9 @@ hdd_get_ibss_peer_info_cb(void *pUserData, hdd_station_ctx_t *pStaCtx; uint8_t i; - /* Sanity check */ if ((NULL == adapter) || (WLAN_HDD_ADAPTER_MAGIC != adapter->magic)) { - hdd_alert("invalid adapter or adapter has invalid magic"); + hdd_err("invalid adapter or adapter has invalid magic"); return; } @@ -455,7 +454,7 @@ hdd_get_ibss_peer_info_cb(void *pUserData, pStaCtx->ibss_peer_info.peerInfoParams[i] = pPeerInfo->peerInfoParams[i]; } else { - hdd_err("peerInfo %s: status %u, numPeers %u", + hdd_debug("peerInfo %s: status %u, numPeers %u", pPeerInfo ? "valid" : "null", pPeerInfo ? pPeerInfo->status : QDF_STATUS_E_FAILURE, pPeerInfo ? pPeerInfo->numPeers : 0); @@ -866,7 +865,7 @@ void hdd_wma_send_fastreassoc_cmd(hdd_adapter_t *adapter, &fastreassoc->frame_len); if (QDF_STATUS_SUCCESS != status) { - hdd_err("sme_get_beacon_frm failed"); + hdd_warn("sme_get_beacon_frm failed"); fastreassoc->frame_buf = NULL; fastreassoc->frame_len = 0; } @@ -916,7 +915,7 @@ int hdd_reassoc(hdd_adapter_t *adapter, const uint8_t *bssid, /* if not associated, no need to proceed with reassoc */ if (eConnectionState_Associated != pHddStaCtx->conn_info.connState) { - hdd_info("Not associated"); + hdd_warn("Not associated"); ret = -EINVAL; goto exit; } @@ -927,14 +926,14 @@ int hdd_reassoc(hdd_adapter_t *adapter, const uint8_t *bssid, */ if (!memcmp(bssid, pHddStaCtx->conn_info.bssId.bytes, QDF_MAC_ADDR_SIZE)) { - hdd_info("Reassoc BSSID is same as currently associated AP bssid"); + hdd_warn("Reassoc BSSID is same as currently associated AP bssid"); channel = pHddStaCtx->conn_info.operationChannel; } /* Check channel number is a valid channel number */ if (QDF_STATUS_SUCCESS != wlan_hdd_validate_operation_channel(adapter, channel)) { - hdd_err("Invalid Channel %d", channel); + hdd_err("Invalid Channel: %d", channel); ret = -EINVAL; goto exit; } @@ -1101,7 +1100,7 @@ hdd_sendactionframe(hdd_adapter_t *adapter, const uint8_t *bssid, /* if not associated, no need to send action frame */ if (eConnectionState_Associated != pHddStaCtx->conn_info.connState) { - hdd_info("Not associated"); + hdd_warn("Not associated"); ret = -EINVAL; goto exit; } @@ -1112,7 +1111,7 @@ hdd_sendactionframe(hdd_adapter_t *adapter, const uint8_t *bssid, */ if (memcmp(bssid, pHddStaCtx->conn_info.bssId.bytes, QDF_MAC_ADDR_SIZE)) { - hdd_info("STA is not associated to this AP"); + hdd_warn("STA is not associated to this AP"); ret = -EINVAL; goto exit; } @@ -1130,7 +1129,7 @@ hdd_sendactionframe(hdd_adapter_t *adapter, const uint8_t *bssid, if (channel != 0) { if (channel != pHddStaCtx->conn_info.operationChannel) { - hdd_info("channel(%d) is different from operating channel(%d)", + hdd_warn("channel(%d) is different from operating channel(%d)", channel, pHddStaCtx->conn_info. operationChannel); @@ -1159,7 +1158,7 @@ hdd_sendactionframe(hdd_adapter_t *adapter, const uint8_t *bssid, } } if (chan.center_freq == 0) { - hdd_err("Invalid channel number %d", channel); + hdd_err("Invalid channel number: %d", channel); ret = -EINVAL; goto exit; } @@ -1410,7 +1409,7 @@ hdd_parse_channellist(const uint8_t *pValue, uint8_t *pChannelList, *pNumChannels = tempInt; - hdd_info("Number of channels are: %d", *pNumChannels); + hdd_debug("Number of channels are: %d", *pNumChannels); for (j = 0; j < (*pNumChannels); j++) { /* @@ -1457,7 +1456,7 @@ hdd_parse_channellist(const uint8_t *pValue, uint8_t *pChannelList, } pChannelList[j] = tempInt; - hdd_info("Channel %d added to preferred channel list", + hdd_debug("Channel %d added to preferred channel list", pChannelList[j]); } @@ -1719,7 +1718,7 @@ static QDF_STATUS hdd_parse_plm_cmd(uint8_t *pValue, tSirPlmReq *pPlmRequest) pPlmRequest->meas_token = content; hdd_debug("meas token %d", pPlmRequest->meas_token); - hdd_err("PLM req %s", pPlmRequest->enable ? "START" : "STOP"); + hdd_debug("PLM req %s", pPlmRequest->enable ? "START" : "STOP"); if (pPlmRequest->enable) { cmdPtr = strpbrk(cmdPtr, " "); @@ -1966,7 +1965,7 @@ static int hdd_enable_ext_wow(hdd_adapter_t *adapter, pm_message_t state; state.event = PM_EVENT_SUSPEND; - hdd_info("Received ready to ExtWoW. Going to suspend"); + hdd_debug("Received ready to ExtWoW. Going to suspend"); rc = wlan_hdd_cfg80211_suspend_wlan(hdd_ctx->wiphy, NULL); if (rc < 0) { @@ -2003,7 +2002,7 @@ static int hdd_enable_ext_wow_parser(hdd_adapter_t *adapter, int vdev_id, if (value < EXT_WOW_TYPE_APP_TYPE1 || value > EXT_WOW_TYPE_APP_TYPE1_2) { - hdd_err("Invalid type"); + hdd_err("Invalid type: %d", value); return -EINVAL; } @@ -2076,7 +2075,7 @@ static int hdd_set_app_type1_parser(hdd_adapter_t *adapter, params.pass_length = strlen(password); qdf_mem_copy(params.password, password, params.pass_length); - hdd_info("%d %pM %.8s %u %.16s %u", + hdd_debug("%d %pM %.8s %u %.16s %u", params.vdev_id, params.wakee_mac_addr.bytes, params.identification_id, params.id_length, params.password, params.pass_length); @@ -2187,7 +2186,7 @@ static int hdd_set_app_type2_parser(hdd_adapter_t *adapter, params.tcp_rx_timeout_val : hdd_ctx->config->extWowApp2TcpRxTimeout; - hdd_info("%pM %.16s %u %u %u %u %u %u %u %u %u %u %u %u %u", + hdd_debug("%pM %.16s %u %u %u %u %u %u %u %u %u %u %u %u %u", gateway_mac, rc4_key, params.ip_id, params.ip_device_ip, params.ip_server_ip, params.tcp_seq, params.tcp_ack_seq, params.tcp_src_port, params.tcp_dst_port, @@ -2249,7 +2248,7 @@ static int hdd_parse_setmaxtxpower_command(uint8_t *pValue, int *pTxPower) *pTxPower = tempInt; - hdd_info("SETMAXTXPOWER: %d", *pTxPower); + hdd_debug("SETMAXTXPOWER: %d", *pTxPower); return 0; } /* End of hdd_parse_setmaxtxpower_command */ @@ -2454,7 +2453,7 @@ static int wlan_hdd_get_link_status(hdd_adapter_t *adapter) /* If not associated, then expected link status return * value is 0 */ - hdd_info("Not associated!"); + hdd_warn("Not associated!"); return 0; } @@ -2676,7 +2675,7 @@ static int hdd_parse_ese_beacon_req(uint8_t *pValue, input = QDF_MIN(input, SIR_ESE_MAX_MEAS_IE_REQS); pEseBcnReq->numBcnReqIe = input; - hdd_info("Number of Bcn Req Ie fields: %d", pEseBcnReq->numBcnReqIe); + hdd_debug("Number of Bcn Req Ie fields: %d", pEseBcnReq->numBcnReqIe); for (j = 0; j < (pEseBcnReq->numBcnReqIe); j++) { for (i = 0; i < 4; i++) { @@ -2759,7 +2758,7 @@ static int hdd_parse_ese_beacon_req(uint8_t *pValue, } for (j = 0; j < pEseBcnReq->numBcnReqIe; j++) { - hdd_info("Index: %d Measurement Token: %u Channel: %u Scan Mode: %u Measurement Duration: %u", + hdd_debug("Index: %d Measurement Token: %u Channel: %u Scan Mode: %u Measurement Duration: %u", j, pEseBcnReq->bcnReq[j].measurementToken, pEseBcnReq->bcnReq[j].channel, @@ -2871,7 +2870,7 @@ int wlan_hdd_set_mc_rate(hdd_adapter_t *pAdapter, int targetRate) rateUpdate.mcastDataRate5GHz = targetRate; rateUpdate.bcastDataRate = -1; qdf_copy_macaddr(&rateUpdate.bssid, &pAdapter->macAddressCurrent); - hdd_info("MC Target rate %d, mac = %pM, dev_mode %s(%d)", + hdd_debug("MC Target rate %d, mac = %pM, dev_mode %s(%d)", rateUpdate.mcastDataRate24GHz, rateUpdate.bssid.bytes, hdd_device_mode_to_string(pAdapter->device_mode), pAdapter->device_mode); @@ -2970,7 +2969,7 @@ static int drv_cmd_set_band(hdd_adapter_t *adapter, * First 8 bytes will have "SETBAND " and * 9 byte will have band setting value */ - hdd_info("SetBandCommand Info comm %s UL %d, TL %d", + hdd_debug("SetBandCommand Info comm %s UL %d, TL %d", command, priv_data->used_len, priv_data->total_len); @@ -3070,7 +3069,7 @@ static int drv_cmd_set_roam_trigger(hdd_adapter_t *adapter, MTRACE(qdf_trace(QDF_MODULE_ID_HDD, TRACE_CODE_HDD_SETROAMTRIGGER_IOCTL, adapter->sessionId, lookUpThreshold)); - hdd_info("Received Command to Set Roam trigger (Neighbor lookup threshold) = %d", + hdd_debug("Received Command to Set Roam trigger (Neighbor lookup threshold) = %d", lookUpThreshold); hdd_ctx->config->nNeighborLookupRssiThreshold = lookUpThreshold; @@ -3159,7 +3158,7 @@ static int drv_cmd_set_roam_scan_period(hdd_adapter_t *adapter, adapter->sessionId, roamScanPeriod)); neighborEmptyScanRefreshPeriod = roamScanPeriod * 1000; - hdd_info("Received Command to Set roam scan period (Empty Scan refresh period) = %d", + hdd_debug("Received Command to Set roam scan period (Empty Scan refresh period) = %d", roamScanPeriod); hdd_ctx->config->nEmptyScanRefreshPeriod = @@ -3246,7 +3245,7 @@ static int drv_cmd_set_roam_scan_refresh_period(hdd_adapter_t *adapter, } neighborScanRefreshPeriod = roamScanRefreshPeriod * 1000; - hdd_info("Received Command to Set roam scan refresh period (Scan refresh period) = %d", + hdd_debug("Received Command to Set roam scan refresh period (Scan refresh period) = %d", roamScanRefreshPeriod); hdd_ctx->config->nNeighborResultsRefreshPeriod = @@ -3432,7 +3431,7 @@ static int drv_cmd_set_roam_delta(hdd_adapter_t *adapter, goto exit; } - hdd_info("Received Command to Set roam rssi diff = %d", + hdd_debug("Received Command to Set roam rssi diff = %d", roamRssiDiff); hdd_ctx->config->RoamRssiDiff = roamRssiDiff; @@ -3527,7 +3526,7 @@ static int drv_cmd_get_roam_scan_channels(hdd_adapter_t *adapter, ChannelList, &numChannels, adapter->sessionId)) { - hdd_alert("failed to get roam scan channel list"); + hdd_err("failed to get roam scan channel list"); ret = -EFAULT; goto exit; } @@ -3719,7 +3718,7 @@ static int drv_cmd_set_roam_scan_channel_min_time(hdd_adapter_t *adapter, MTRACE(qdf_trace(QDF_MODULE_ID_HDD, TRACE_CODE_HDD_SETROAMSCANCHANNELMINTIME_IOCTL, adapter->sessionId, minTime)); - hdd_info("Received Command to change channel min time = %d", + hdd_debug("Received Command to change channel min time = %d", minTime); hdd_ctx->config->nNeighborScanMinChanTime = minTime; @@ -3807,7 +3806,7 @@ static int drv_cmd_set_scan_channel_time(hdd_adapter_t *adapter, goto exit; } - hdd_info("Received Command to change channel max time = %d", + hdd_debug("Received Command to change channel max time = %d", maxTime); hdd_ctx->config->nNeighborScanMaxChanTime = maxTime; @@ -3881,7 +3880,7 @@ static int drv_cmd_set_scan_home_time(hdd_adapter_t *adapter, goto exit; } - hdd_info("Received Command to change scan home time = %d", + hdd_debug("Received Command to change scan home time = %d", val); hdd_ctx->config->nNeighborScanPeriod = val; @@ -3954,7 +3953,7 @@ static int drv_cmd_set_roam_intra_band(hdd_adapter_t *adapter, ret = -EINVAL; goto exit; } - hdd_info("Received Command to change intra band = %d", + hdd_debug("Received Command to change intra band = %d", val); hdd_ctx->config->nRoamIntraBand = val; @@ -4024,7 +4023,7 @@ static int drv_cmd_set_scan_n_probes(hdd_adapter_t *adapter, goto exit; } - hdd_info("Received Command to Set nProbes = %d", + hdd_debug("Received Command to Set nProbes = %d", nProbes); hdd_ctx->config->nProbes = nProbes; @@ -4095,7 +4094,7 @@ static int drv_cmd_set_scan_home_away_time(hdd_adapter_t *adapter, goto exit; } - hdd_info("Received Command to Set scan away time = %d", + hdd_debug("Received Command to Set scan away time = %d", homeAwayTime); if (hdd_ctx->config->nRoamScanHomeAwayTime != @@ -4179,7 +4178,7 @@ static int drv_cmd_set_wes_mode(hdd_adapter_t *adapter, goto exit; } - hdd_info("Received Command to Set WES Mode rssi diff = %d", + hdd_debug("Received Command to Set WES Mode rssi diff = %d", wesMode); hdd_ctx->config->isWESModeEnabled = wesMode; @@ -4231,12 +4230,12 @@ static int drv_cmd_set_opportunistic_rssi_diff(hdd_adapter_t *adapter, * If the input value is greater than max value of datatype, * then also kstrtou8 fails */ - hdd_err("kstrtou8 failed."); + hdd_err("kstrtou8 failed"); ret = -EINVAL; goto exit; } - hdd_info("Received Command to Set Opportunistic Threshold diff = %d", + hdd_debug("Received Command to Set Opportunistic Threshold diff = %d", nOpportunisticThresholdDiff); sme_set_roam_opportunistic_scan_threshold_diff(hdd_ctx->hHal, @@ -4289,12 +4288,12 @@ static int drv_cmd_set_roam_rescan_rssi_diff(hdd_adapter_t *adapter, * If the input value is greater than max value of datatype, * then also kstrtou8 fails */ - hdd_err("kstrtou8 failed."); + hdd_err("kstrtou8 failed"); ret = -EINVAL; goto exit; } - hdd_info("Received Command to Set Roam Rescan RSSI Diff = %d", + hdd_debug("Received Command to Set Roam Rescan RSSI Diff = %d", nRoamRescanRssiDiff); sme_set_roam_rescan_rssi_diff(hdd_ctx->hHal, @@ -4368,7 +4367,7 @@ static int drv_cmd_set_fast_roam(hdd_adapter_t *adapter, goto exit; } - hdd_info("Received Command to change lfr mode = %d", + hdd_debug("Received Command to change lfr mode = %d", lfrMode); hdd_ctx->config->isFastRoamIniFeatureEnabled = lfrMode; @@ -4418,7 +4417,7 @@ static int drv_cmd_set_fast_transition(hdd_adapter_t *adapter, goto exit; } - hdd_info("Received Command to change ft mode = %d", ft); + hdd_debug("Received Command to change ft mode = %d", ft); hdd_ctx->config->isFastTransitionEnabled = ft; sme_update_fast_transition_enabled(hdd_ctx->hHal, ft); @@ -4453,7 +4452,7 @@ static int drv_cmd_fast_reassoc(hdd_adapter_t *adapter, /* if not associated, no need to proceed with reassoc */ if (eConnectionState_Associated != pHddStaCtx->conn_info.connState) { - hdd_info("Not associated!"); + hdd_warn("Not associated!"); ret = -EINVAL; goto exit; } @@ -4472,7 +4471,7 @@ static int drv_cmd_fast_reassoc(hdd_adapter_t *adapter, if (!qdf_mem_cmp(targetApBssid, pHddStaCtx->conn_info.bssId.bytes, QDF_MAC_ADDR_SIZE)) { - hdd_info("Reassoc BSSID is same as currently associated AP bssid"); + hdd_warn("Reassoc BSSID is same as currently associated AP bssid"); if (roaming_offload_enabled(hdd_ctx)) { hdd_wma_send_fastreassoc_cmd(adapter, targetApBssid, @@ -4530,12 +4529,12 @@ static int drv_cmd_set_roam_scan_control(hdd_adapter_t *adapter, * If the input value is greater than max value of datatype, * then also kstrtou8 fails */ - hdd_err("kstrtou8 failed "); + hdd_err("kstrtou8 failed"); ret = -EINVAL; goto exit; } - hdd_info("Received Command to Set roam scan control = %d", + hdd_debug("Received Command to Set roam scan control = %d", roamScanControl); if (0 != roamScanControl) { @@ -4601,7 +4600,7 @@ static int drv_cmd_set_okc_mode(hdd_adapter_t *adapter, ret = -EINVAL; goto exit; } - hdd_info("Received Command to change okc mode = %d", + hdd_debug("Received Command to change okc mode = %d", okc_mode); if (okc_mode) @@ -4742,14 +4741,14 @@ static int drv_cmd_miracast(hdd_adapter_t *adapter, * If the input value is greater than max value of datatype, * then also kstrtou8 fails */ - hdd_err("kstrtou8 failed range "); + hdd_err("kstrtou8 failed range"); ret = -EINVAL; goto exit; } if ((filterType < WLAN_HDD_DRIVER_MIRACAST_CFG_MIN_VAL) || (filterType > WLAN_HDD_DRIVER_MIRACAST_CFG_MAX_VAL)) { - hdd_err("Accepted Values are 0 to 2. 0-Disabled, 1-Source, 2-Sink "); + hdd_err("Accepted Values are 0 to 2. 0-Disabled, 1-Source, 2-Sink"); ret = -EINVAL; goto exit; } @@ -4842,7 +4841,7 @@ static int drv_cmd_set_ibss_beacon_oui_data(hdd_adapter_t *adapter, if (QDF_IBSS_MODE != adapter->device_mode) { - hdd_info("Device_mode %s(%d) not IBSS", + hdd_debug("Device_mode %s(%d) not IBSS", hdd_device_mode_to_string(adapter->device_mode), adapter->device_mode); return ret; @@ -4850,7 +4849,7 @@ static int drv_cmd_set_ibss_beacon_oui_data(hdd_adapter_t *adapter, pWextState = WLAN_HDD_GET_WEXT_STATE_PTR(adapter); - hdd_info("received command %s", ((char *)value)); + hdd_debug("received command %s", ((char *)value)); /* validate argument of command */ @@ -4956,12 +4955,12 @@ static int drv_cmd_set_rmc_enable(hdd_adapter_t *adapter, status = hdd_parse_setrmcenable_command(value, &ucRmcEnable); if (status) { - hdd_err("Invalid SETRMCENABLE command "); + hdd_err("Invalid SETRMCENABLE command"); ret = -EINVAL; goto exit; } - hdd_info("ucRmcEnable %d ", ucRmcEnable); + hdd_debug("ucRmcEnable %d", ucRmcEnable); if (true == ucRmcEnable) { status = sme_enable_rmc((tHalHandle) @@ -5012,12 +5011,12 @@ static int drv_cmd_set_rmc_action_period(hdd_adapter_t *adapter, status = hdd_parse_setrmcactionperiod_command(value, &uActionPeriod); if (status) { - hdd_err("Invalid SETRMCACTIONPERIOD command "); + hdd_err("Invalid SETRMCACTIONPERIOD command"); ret = -EINVAL; goto exit; } - hdd_info("uActionPeriod %d ", + hdd_debug("uActionPeriod %d", uActionPeriod); if (sme_cfg_set_int(hdd_ctx->hHal, @@ -5065,7 +5064,7 @@ static int drv_cmd_get_ibss_peer_info_all(hdd_adapter_t *adapter, } pHddStaCtx = WLAN_HDD_GET_STATION_CTX_PTR(adapter); - hdd_info("Received GETIBSSPEERINFOALL Command"); + hdd_debug("Received GETIBSSPEERINFOALL Command"); /* Handle the command */ status = hdd_cfg80211_get_ibss_peer_info_all(adapter); @@ -5130,7 +5129,7 @@ static int drv_cmd_get_ibss_peer_info_all(hdd_adapter_t *adapter, * it in two shots */ if (copy_to_user(priv_data->buf, extra, numOfBytestoPrint)) { - hdd_err("Copy into user data buffer failed "); + hdd_err("Copy into user data buffer failed"); ret = -EFAULT; goto exit; } @@ -5143,7 +5142,7 @@ static int drv_cmd_get_ibss_peer_info_all(hdd_adapter_t *adapter, (priv_data->buf + numOfBytestoPrint, extra + numOfBytestoPrint, length - numOfBytestoPrint + 1)) { - hdd_err("Copy into user data buffer failed "); + hdd_err("Copy into user data buffer failed"); ret = -EFAULT; goto exit; } @@ -5190,12 +5189,12 @@ static int drv_cmd_get_ibss_peer_info(hdd_adapter_t *adapter, pHddStaCtx = WLAN_HDD_GET_STATION_CTX_PTR(adapter); - hdd_info("Received GETIBSSPEERINFO Command"); + hdd_debug("Received GETIBSSPEERINFO Command"); /* if there are no peers, no need to continue with the command */ if (eConnectionState_IbssConnected != pHddStaCtx->conn_info.connState) { - hdd_info("No IBSS Peers coalesced"); + hdd_err("No IBSS Peers coalesced"); ret = -EINVAL; goto exit; } @@ -5278,11 +5277,11 @@ static int drv_cmd_set_rmc_tx_rate(hdd_adapter_t *adapter, status = hdd_parse_setrmcrate_command(value, &uRate, &txFlags); if (status) { - hdd_err("Invalid SETRMCTXRATE command "); + hdd_err("Invalid SETRMCTXRATE command"); ret = -EINVAL; goto exit; } - hdd_info("uRate %d ", uRate); + hdd_debug("uRate %d", uRate); /* -1 implies ignore this param */ rateUpdateParams.ucastDataRate = -1; @@ -5321,11 +5320,11 @@ static int drv_cmd_set_ibss_tx_fail_event(hdd_adapter_t *adapter, ret = hdd_parse_ibsstx_fail_event_params(value, &tx_fail_count, &pid); if (0 != ret) { - hdd_info("Failed to parse SETIBSSTXFAILEVENT arguments"); + hdd_err("Failed to parse SETIBSSTXFAILEVENT arguments"); goto exit; } - hdd_info("tx_fail_cnt=%hhu, pid=%hu", tx_fail_count, pid); + hdd_debug("tx_fail_cnt=%hhu, pid=%hu", tx_fail_count, pid); if (0 == tx_fail_count) { /* Disable TX Fail Indication */ @@ -5335,7 +5334,7 @@ static int drv_cmd_set_ibss_tx_fail_event(hdd_adapter_t *adapter, NULL)) { cesium_pid = 0; } else { - hdd_err("failed to disable TX Fail Event "); + hdd_err("failed to disable TX Fail Event"); ret = -EINVAL; } } else { @@ -5344,7 +5343,7 @@ static int drv_cmd_set_ibss_tx_fail_event(hdd_adapter_t *adapter, tx_fail_count, (void *)hdd_tx_fail_ind_callback)) { cesium_pid = pid; - hdd_info("Registered Cesium pid %u", + hdd_debug("Registered Cesium pid %u", cesium_pid); } else { hdd_err("Failed to enable TX Fail Monitoring"); @@ -5448,7 +5447,7 @@ static int drv_cmd_get_tsm_stats(hdd_adapter_t *adapter, ret = -EINVAL; goto exit; } - hdd_info("Received Command to get tsm stats tid = %d", + hdd_debug("Received Command to get tsm stats tid = %d", tid); if (QDF_STATUS_SUCCESS != hdd_get_tsm_stats(adapter, tid, &tsm_metrics)) { @@ -5456,7 +5455,7 @@ static int drv_cmd_get_tsm_stats(hdd_adapter_t *adapter, ret = -EFAULT; goto exit; } - hdd_info( + hdd_debug( "UplinkPktQueueDly(%d) UplinkPktQueueDlyHist[0](%d) UplinkPktQueueDlyHist[1](%d) UplinkPktQueueDlyHist[2](%d) UplinkPktQueueDlyHist[3](%d) UplinkPktTxDly(%u) UplinkPktLoss(%d) UplinkPktCount(%d) RoamingCount(%d) RoamingDly(%d)", tsm_metrics.UplinkPktQueueDly, tsm_metrics.UplinkPktQueueDlyHist[0], @@ -5563,7 +5562,7 @@ static int drv_cmd_ccx_beacon_req(hdd_adapter_t *adapter, } if (!hdd_conn_is_connected(WLAN_HDD_GET_STATION_CTX_PTR(adapter))) { - hdd_info("Not associated"); + hdd_debug("Not associated"); hdd_indicate_ese_bcn_report_no_results(adapter, eseBcnReq.bcnReq[0].measurementToken, 0x02, /* BIT(1) set for measurement done */ @@ -5576,7 +5575,7 @@ static int drv_cmd_ccx_beacon_req(hdd_adapter_t *adapter, &eseBcnReq); if (QDF_STATUS_E_RESOURCES == status) { - hdd_info("sme_set_ese_beacon_request failed (%d), a request already in progress", + hdd_err("sme_set_ese_beacon_request failed (%d), a request already in progress", status); ret = -EBUSY; goto exit; @@ -5709,7 +5708,7 @@ static int drv_cmd_set_ccx_mode(hdd_adapter_t *adapter, ret = -EINVAL; goto exit; } - hdd_info("Received Command to change ese mode = %d", eseMode); + hdd_debug("Received Command to change ese mode = %d", eseMode); hdd_ctx->config->isEseIniFeatureEnabled = eseMode; sme_update_is_ese_feature_enabled(hdd_ctx->hHal, @@ -5762,7 +5761,7 @@ static int drv_cmd_max_tx_power(hdd_adapter_t *adapter, status = hdd_parse_setmaxtxpower_command(value, &txPower); if (status) { - hdd_err("Invalid MAXTXPOWER command "); + hdd_err("Invalid MAXTXPOWER command"); ret = -EINVAL; goto exit; } @@ -5777,7 +5776,7 @@ static int drv_cmd_max_tx_power(hdd_adapter_t *adapter, qdf_copy_macaddr(&selfMac, &adapter->macAddressCurrent); - hdd_info("Device mode %d max tx power %d selfMac: " + hdd_debug("Device mode %d max tx power %d selfMac: " MAC_ADDRESS_STR " bssId: " MAC_ADDRESS_STR " ", adapter->device_mode, txPower, MAC_ADDR_ARRAY(selfMac.bytes), @@ -5790,7 +5789,7 @@ static int drv_cmd_max_tx_power(hdd_adapter_t *adapter, ret = -EINVAL; goto exit; } - hdd_info("Set max tx power success"); + hdd_debug("Set max tx power success"); qdf_status = hdd_get_next_adapter(hdd_ctx, pAdapterNode, &pNext); pAdapterNode = pNext; @@ -5837,7 +5836,7 @@ static int drv_cmd_set_dfs_scan_mode(hdd_adapter_t *adapter, goto exit; } - hdd_info("Received Command to Set DFS Scan Mode = %d", + hdd_debug("Received Command to Set DFS Scan Mode = %d", dfsScanMode); /* When DFS scanning is disabled, the DFS channels need to be @@ -5996,7 +5995,7 @@ static int drv_cmd_tdls_secondary_channel_offset(hdd_adapter_t *adapter, if (ret != 1) return -EINVAL; - hdd_info("Tdls offchannel offset:%d", set_value); + hdd_debug("Tdls offchannel offset:%d", set_value); ret = hdd_set_tdls_secoffchanneloffset(hdd_ctx, set_value); @@ -6032,7 +6031,7 @@ static int drv_cmd_tdls_off_channel_mode(hdd_adapter_t *adapter, if (ret != 1) return -EINVAL; - hdd_info("Tdls offchannel mode:%d", set_value); + hdd_debug("Tdls offchannel mode:%d", set_value); ret = hdd_set_tdls_offchannelmode(adapter, set_value); @@ -6074,7 +6073,7 @@ static int drv_cmd_tdls_off_channel(hdd_adapter_t *adapter, return -EINVAL; } - hdd_info("Tdls offchannel num: %d", set_value); + hdd_debug("Tdls offchannel num: %d", set_value); ret = hdd_set_tdls_offchannel(hdd_ctx, set_value); @@ -6110,7 +6109,7 @@ static int drv_cmd_tdls_scan(hdd_adapter_t *adapter, if (ret != 1) return -EINVAL; - hdd_info("Tdls scan type val: %d", set_value); + hdd_debug("Tdls scan type val: %d", set_value); ret = hdd_set_tdls_scan_type(hdd_ctx, set_value); @@ -6202,7 +6201,7 @@ static int hdd_set_rx_filter(hdd_adapter_t *adapter, bool action, } if (!hdd_ctx->config->fEnableMCAddrList) { - hdd_notice("mc addr ini is disabled"); + hdd_warn("mc addr ini is disabled"); return -EINVAL; } @@ -6235,7 +6234,7 @@ static int hdd_set_rx_filter(hdd_adapter_t *adapter, bool action, adapter->mc_addr_list.addr[i], sizeof(adapter->mc_addr_list.addr[i])); - hdd_info("%s RX filter : addr =" + hdd_debug("%s RX filter : addr =" MAC_ADDRESS_STR, action ? "setting" : "clearing", MAC_ADDR_ARRAY(filter->multicastAddr[j].bytes)); @@ -6249,7 +6248,7 @@ static int hdd_set_rx_filter(hdd_adapter_t *adapter, bool action, sme_8023_multicast_list(handle, adapter->sessionId, filter); qdf_mem_free(filter); } else { - hdd_info("mode %d mc_cnt %d", + hdd_debug("mode %d mc_cnt %d", adapter->device_mode, adapter->mc_addr_list.mc_cnt); } @@ -6308,7 +6307,7 @@ static int hdd_driver_rxfilter_comand_handler(uint8_t *command, ret = hdd_set_rx_filter(adapter, action, 0x01); break; default: - hdd_info("Unsupported RXFILTER type %d", type); + hdd_warn("Unsupported RXFILTER type %d", type); break; } @@ -6480,7 +6479,7 @@ static int drv_cmd_set_antenna_mode(hdd_adapter_t *adapter, goto exit; } - hdd_info("Processing antenna mode switch to: %d", mode); + hdd_debug("Processing antenna mode switch to: %d", mode); if (hdd_ctx->current_antenna_mode == mode) { hdd_err("System already in the requested mode"); @@ -6528,7 +6527,7 @@ static int drv_cmd_set_antenna_mode(hdd_adapter_t *adapter, params.set_antenna_mode_resp = (void *)wlan_hdd_soc_set_antenna_mode_cb; - hdd_info("Set antenna mode rx chains: %d tx chains: %d", + hdd_debug("Set antenna mode rx chains: %d tx chains: %d", params.num_rx_chains, params.num_tx_chains); @@ -6559,7 +6558,7 @@ static int drv_cmd_set_antenna_mode(hdd_adapter_t *adapter, smps_mode = HDD_SMPS_MODE_DISABLED; } - hdd_info("Update SME SMPS enable: %d mode: %d", + hdd_debug("Update SME SMPS enable: %d mode: %d", smps_enable, smps_mode); status = sme_update_mimo_power_save( hdd_ctx->hHal, smps_enable, smps_mode, false); @@ -6579,7 +6578,7 @@ static int drv_cmd_set_antenna_mode(hdd_adapter_t *adapter, hdd_ctx->hHal, hdd_ctx->current_antenna_mode); - hdd_info("Successfully switched to mode: %d x %d", + hdd_debug("Successfully switched to mode: %d x %d", hdd_ctx->current_antenna_mode, hdd_ctx->current_antenna_mode); ret = 0; @@ -6591,11 +6590,11 @@ exit: hdd_ctx->tdls_nss_switch_in_progress = false; hdd_ctx->tdls_nss_teardown_complete = false; } - hdd_info("tdls_nss_switch_in_progress: %d tdls_nss_teardown_complete: %d", + hdd_debug("tdls_nss_switch_in_progress: %d tdls_nss_teardown_complete: %d", hdd_ctx->tdls_nss_switch_in_progress, hdd_ctx->tdls_nss_teardown_complete); #endif - hdd_info("Set antenna status: %d current mode: %d", + hdd_debug("Set antenna status: %d current mode: %d", ret, hdd_ctx->current_antenna_mode); return ret; @@ -6631,7 +6630,7 @@ static inline int drv_cmd_get_antenna_mode(hdd_adapter_t *adapter, return -EFAULT; } - hdd_info("Get antenna mode: %d", antenna_mode); + hdd_debug("Get antenna mode: %d", antenna_mode); return 0; } @@ -6645,7 +6644,7 @@ static int drv_cmd_dummy(hdd_adapter_t *adapter, uint8_t command_len, hdd_priv_data_t *priv_data) { - hdd_info("%s: Ignoring driver command \"%s\"", + hdd_debug("%s: Ignoring driver command \"%s\"", adapter->dev->name, command); return 0; } @@ -6830,7 +6829,7 @@ static int drv_cmd_set_channel_switch(hdd_adapter_t *adapter, else width = CH_WIDTH_20MHZ; - hdd_info("CH:%d BW:%d", chan_number, chan_bw); + hdd_debug("CH:%d BW:%d", chan_number, chan_bw); status = hdd_softap_set_channel_change(dev, chan_number, width); if (status) { @@ -7026,7 +7025,7 @@ static int hdd_driver_command(hdd_adapter_t *adapter, /* copy to local struct to avoid numerous changes to legacy code */ if (priv_data->total_len <= 0 || priv_data->total_len > WLAN_PRIV_DATA_MAX_LEN) { - hdd_warn("Invalid priv_data.total_len(%d)!!!", + hdd_warn("Invalid priv_data.total_len: %d!!!", priv_data->total_len); ret = -EINVAL; goto exit; @@ -7048,7 +7047,7 @@ static int hdd_driver_command(hdd_adapter_t *adapter, /* Make sure the command is NUL-terminated */ command[priv_data->total_len] = '\0'; - hdd_info("%s: %s", adapter->dev->name, command); + hdd_debug("%s: %s", adapter->dev->name, command); ret = hdd_drv_cmd_process(adapter, command, priv_data); exit: @@ -7137,13 +7136,13 @@ static int __hdd_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) ENTER_DEV(dev); if (dev != adapter->dev) { - hdd_alert("HDD adapter/dev inconsistency"); + hdd_err("HDD adapter/dev inconsistency"); ret = -ENODEV; goto exit; } if ((!ifr) || (!ifr->ifr_data)) { - hdd_err("invalid data"); + hdd_err("invalid data cmd: %d", cmd); ret = -EINVAL; goto exit; } |