Merge commit 'v2.6.28-rc2' into x86/pci-ioapic-boot-irq-quirks

45 files changed, 2316 insertions, 564 deletions

diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index d64e6badc942..982dcae7bbe2 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -105,12 +105,12 @@ as-instr = $(call try-run,\
 # Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586)
 
 cc-option = $(call try-run,\
-	$(CC) $(KBUILD_CFLAGS) $(1) -S -xc /dev/null -o "$$TMP",$(1),$(2))
+	$(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",$(1),$(2))
 
 # cc-option-yn
 # Usage: flag := $(call cc-option-yn,-march=winchip-c6)
 cc-option-yn = $(call try-run,\
-	$(CC) $(KBUILD_CFLAGS) $(1) -S -xc /dev/null -o "$$TMP",y,n)
+	$(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",y,n)
 
 # cc-option-align
 # Prefix align with either -falign or -malign
diff --git a/scripts/Makefile b/scripts/Makefile
index 1c73c5aea66b..aafdf064feef 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -20,6 +20,7 @@ hostprogs-y += unifdef
 
 subdir-$(CONFIG_MODVERSIONS) += genksyms
 subdir-y                     += mod
+subdir-$(CONFIG_SECURITY_SELINUX) += selinux
 
 # Let clean descend into subdirs
-subdir-	+= basic kconfig package
+subdir-	+= basic kconfig package selinux
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 277cfe0b7100..5ed4cbf1e0e1 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -198,10 +198,17 @@ cmd_modversions =							\
 	fi;
 endif
 
+ifdef CONFIG_FTRACE_MCOUNT_RECORD
+cmd_record_mcount = perl $(srctree)/scripts/recordmcount.pl \
+	"$(ARCH)" "$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" \
+	"$(MV)" "$(@)";
+endif
+
 define rule_cc_o_c
 	$(call echo-cmd,checksrc) $(cmd_checksrc)			  \
 	$(call echo-cmd,cc_o_c) $(cmd_cc_o_c);				  \
 	$(cmd_modversions)						  \
+	$(cmd_record_mcount)						  \
 	scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' >    \
 	                                              $(dot-target).tmp;  \
 	rm -f $(depfile);						  \
diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst
index c972c0f54ce0..6bf8e87f1dcf 100644
--- a/scripts/Makefile.fwinst
+++ b/scripts/Makefile.fwinst
@@ -17,14 +17,15 @@ include $(srctree)/$(obj)/Makefile
 
 include scripts/Makefile.host
 
-mod-fw := $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-m))
-
+mod-fw := $(fw-shipped-m)
 # If CONFIG_FIRMWARE_IN_KERNEL isn't set, then install the 
 # firmware for in-kernel drivers too.
 ifndef CONFIG_FIRMWARE_IN_KERNEL
-mod-fw += $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-y))
+mod-fw += $(fw-shipped-y)
 endif
 
+installed-mod-fw := $(addprefix $(INSTALL_FW_PATH)/,$(mod-fw))
+
 installed-fw := $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-all))
 installed-fw-dirs := $(sort $(dir $(installed-fw))) $(INSTALL_FW_PATH)/.
 
@@ -49,7 +50,12 @@ PHONY +=  __fw_install __fw_modinst FORCE
 .PHONY: $(PHONY)
 
 __fw_install: $(installed-fw)
-__fw_modinst: $(mod-fw)
+
+__fw_modinst: $(installed-mod-fw)
+	@:
+
+__fw_modbuild: $(addprefix $(obj)/,$(mod-fw))
+	@:
 
 FORCE:
 
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 53dae3eb3d1f..612dc13ddd85 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -1,194 +1,98 @@
 # ==========================================================================
 # Installing headers
 #
-# header-y files will be installed verbatim
-# unifdef-y are the files where unifdef will be run before installing files
-# objhdr-y are generated files that will be installed verbatim
+# header-y  - list files to be installed. They are preprocessed
+#             to remove __KERNEL__ section of the file
+# unifdef-y - Same as header-y. Obsolete
+# objhdr-y  - Same as header-y but for generated files
 #
 # ==========================================================================
 
-UNIFDEF := scripts/unifdef -U__KERNEL__
-
-# Eliminate the contents of (and inclusions of) compiler.h
-HDRSED  := sed 	-e "s/ inline / __inline__ /g" \
-		-e "s/[[:space:]]__user[[:space:]]\{1,\}/ /g" \
-		-e "s/(__user[[:space:]]\{1,\}/ (/g" \
-		-e "s/[[:space:]]__force[[:space:]]\{1,\}/ /g" \
-		-e "s/(__force[[:space:]]\{1,\}/ (/g" \
-		-e "s/[[:space:]]__iomem[[:space:]]\{1,\}/ /g" \
-		-e "s/(__iomem[[:space:]]\{1,\}/ (/g" \
-		-e "s/[[:space:]]__attribute_const__[[:space:]]\{1,\}/\ /g" \
-		-e "s/[[:space:]]__attribute_const__$$//" \
-		-e "/^\#include <linux\/compiler.h>/d"
-
+# called may set destination dir (when installing to asm/)
 _dst := $(if $(dst),$(dst),$(obj))
 
-ifeq (,$(patsubst include/asm/%,,$(obj)/))
-# For producing the generated stuff in include/asm for biarch builds, include
-# both sets of Kbuild files; we'll generate anything which is mentioned in
-# _either_ arch, and recurse into subdirectories which are mentioned in either
-# arch. Since some directories may exist in one but not the other, we must
-# use $(wildcard...). 
-GENASM := 1
-archasm	   := $(subst include/asm,asm-$(ARCH),$(obj))
-altarchasm := $(subst include/asm,asm-$(ALTARCH),$(obj))
-KBUILDFILES := $(wildcard $(srctree)/include/$(archasm)/Kbuild $(srctree)/include/$(altarchasm)/Kbuild)
-else
-KBUILDFILES := $(srctree)/$(obj)/Kbuild
-endif
+kbuild-file := $(srctree)/$(obj)/Kbuild
+include $(kbuild-file)
 
-include $(KBUILDFILES)
+include scripts/Kbuild.include
 
-include scripts/Kbuild.include 
+install       := $(INSTALL_HDR_PATH)/$(_dst)
 
-# If this is include/asm-$(ARCH) and there's no $(ALTARCH), then
-# override $(_dst) so that we install to include/asm directly.
-# Unless $(BIASMDIR) is set, in which case we're probably doing
-# a 'headers_install_all' build and we should keep the -$(ARCH)
-# in the directory name.
-ifeq ($(obj)$(ALTARCH),include/asm-$(ARCH)$(BIASMDIR))
-     _dst := include/asm
-endif
+header-y      := $(sort $(header-y) $(unifdef-y))
+subdirs       := $(patsubst %/,%,$(filter %/, $(header-y)))
+header-y      := $(filter-out %/, $(header-y))
 
-header-y	:= $(sort $(header-y))
-unifdef-y	:= $(sort $(unifdef-y))
-subdir-y	:= $(patsubst %/,%,$(filter %/, $(header-y)))
-header-y	:= $(filter-out %/, $(header-y))
-header-y	:= $(filter-out $(unifdef-y),$(header-y))
+# files used to track state of install/check
+install-file  := $(install)/.install
+check-file    := $(install)/.check
 
-# stamp files for header checks
-check-y		:= $(patsubst %,.check.%,$(header-y) $(unifdef-y) $(objhdr-y))
+# all headers files for this dir
+all-files     := $(header-y) $(objhdr-y)
+input-files   := $(addprefix $(srctree)/$(obj)/,$(header-y)) \
+                 $(addprefix $(objtree)/$(obj)/,$(objhdr-y))
+output-files  := $(addprefix $(install)/, $(all-files))
 
 # Work out what needs to be removed
-oldheaders	:= $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$(wildcard $(INSTALL_HDR_PATH)/$(_dst)/*.h))
-unwanted	:= $(filter-out $(header-y) $(unifdef-y) $(objhdr-y),$(oldheaders))
+oldheaders    := $(patsubst $(install)/%,%,$(wildcard $(install)/*.h))
+unwanted      := $(filter-out $(all-files),$(oldheaders))
 
-oldcheckstamps	:= $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$(wildcard $(INSTALL_HDR_PATH)/$(_dst)/.check.*.h))
-unwanted	+= $(filter-out $(check-y),$(oldcheckstamps))
+# Prefix unwanted with full paths to $(INSTALL_HDR_PATH)
+unwanted-file := $(addprefix $(install)/, $(unwanted))
 
-# Prefix them all with full paths to $(INSTALL_HDR_PATH)
-header-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(header-y))
-unifdef-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(unifdef-y))
-objhdr-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(objhdr-y))
-check-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(check-y))
+printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
 
+quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
+                            file$(if $(word 2, $(all-files)),s))
+      cmd_install = \
+        $(PERL) $< $(srctree)/$(obj) $(install) $(SRCARCH) $(header-y); \
+        $(PERL) $< $(objtree)/$(obj) $(install) $(SRCARCH) $(objhdr-y); \
+        touch $@
 
-ifdef ALTARCH
-ifeq ($(obj),include/asm-$(ARCH))
-altarch-y	:= altarch-dir
-endif
-endif
+quiet_cmd_remove = REMOVE  $(unwanted)
+      cmd_remove = rm -f $(unwanted-file)
 
-# Make the definitions visible for recursive make invocations
-export ALTARCH
-export ARCHDEF
-export ALTARCHDEF
-
-quiet_cmd_o_hdr_install   = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_o_hdr_install   = cp $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(objtree)/$(obj)/%,$@) \
-			    $(INSTALL_HDR_PATH)/$(_dst)
-
-quiet_cmd_headers_install = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_headers_install = $(HDRSED) $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(srctree)/$(obj)/%,$@)	\
-			    > $@
-
-quiet_cmd_unifdef	  = UNIFDEF $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_unifdef	  = $(UNIFDEF) $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(srctree)/$(obj)/%,$@) \
-				   | $(HDRSED) > $@ || :
-
-quiet_cmd_check		  = CHECK   $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/.check.%,$(_dst)/%,$@)
-      cmd_check		  = $(CONFIG_SHELL) $(srctree)/scripts/hdrcheck.sh \
-                              $(INSTALL_HDR_PATH)/include $(subst /.check.,/,$@) $@
-
-quiet_cmd_remove	  = REMOVE  $(_dst)/$@
-      cmd_remove	  = rm -f $(INSTALL_HDR_PATH)/$(_dst)/$@
-
-quiet_cmd_mkdir		  = MKDIR   $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_mkdir		  = mkdir -p $@
-
-quiet_cmd_gen		  = GEN     $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_gen		  = \
-FNAME=$(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$@);			\
-STUBDEF=__ASM_STUB_`echo $$FNAME | tr a-z.- A-Z__`;			\
-(echo "/* File autogenerated by 'make headers_install' */" ;		\
-echo "\#ifndef $$STUBDEF" ;						\
-echo "\#define $$STUBDEF" ;						\
-echo "\# if $(ARCHDEF)" ;						\
-if [ -r $(subst /$(_dst)/,/include/$(archasm)/,$@) ]; then		\
-	echo "\#  include <$(archasm)/$$FNAME>" ;			\
-else									\
-	echo "\#  error $(archasm)/$$FNAME does not exist in"		\
-			"the $(ARCH) architecture" ;			\
-fi ;									\
-echo "\# elif $(ALTARCHDEF)" ;						\
-if [ -r $(subst /$(_dst)/,/include/$(altarchasm)/,$@) ]; then		\
-	echo "\#  include <$(altarchasm)/$$FNAME>" ;			\
-else									\
-	echo "\#  error $(altarchasm)/$$FNAME does not exist in"	\
-			"the $(ALTARCH) architecture" ;			\
-fi ;									\
-echo "\# else" ;							\
-echo "\#  warning This machine appears to be"				\
-		 "neither $(ARCH) nor $(ALTARCH)." ;			\
-echo "\# endif" ;							\
-echo "\#endif /* $$STUBDEF */" ;					\
-) > $@
-
-.PHONY: __headersinst __headerscheck
-
-ifdef HDRCHECK
-__headerscheck: $(subdir-y) $(check-y)
-	@true
-
-$(check-y) : $(INSTALL_HDR_PATH)/$(_dst)/.check.%.h : $(INSTALL_HDR_PATH)/$(_dst)/%.h 
-	$(call cmd,check)
-
-# Other dependencies for $(check-y)
-include /dev/null $(wildcard $(check-y))
-
-# ... but leave $(check-y) as .PHONY for now until those deps are actually correct.
-.PHONY: $(check-y)
+quiet_cmd_check = CHECK   $(printdir) ($(words $(all-files)) files)
+      cmd_check = $(PERL) $< $(INSTALL_HDR_PATH)/include $(SRCARCH) \
+                  $(addprefix $(install)/, $(all-files));           \
+	          touch $@
 
-else
-# Rules for installing headers
-__headersinst: $(subdir-y) $(header-y) $(unifdef-y) $(altarch-y) $(objhdr-y)
-	@true
+PHONY += __headersinst __headerscheck
 
-$(objhdr-y) $(subdir-y) $(header-y) $(unifdef-y): | $(INSTALL_HDR_PATH)/$(_dst) $(unwanted)
-
-$(INSTALL_HDR_PATH)/$(_dst):
-	$(call cmd,mkdir)
-
-.PHONY: $(unwanted)
-$(unwanted):
-	$(call cmd,remove)
+ifndef HDRCHECK
+# Rules for installing headers
+__headersinst: $(subdirs) $(install-file)
+	@:
 
-ifdef GENASM
-$(objhdr-y) $(header-y) $(unifdef-y): $(KBUILDFILES)
-	$(call cmd,gen)
+targets += $(install-file)
+$(install-file): scripts/headers_install.pl $(input-files) FORCE
+	$(if $(unwanted),$(call cmd,remove),)
+	$(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@)))
+	$(call if_changed,install)
 
 else
-$(objhdr-y) :		$(INSTALL_HDR_PATH)/$(_dst)/%.h: $(objtree)/$(obj)/%.h $(KBUILDFILES)
-	$(call cmd,o_hdr_install)
+__headerscheck: $(subdirs) $(check-file)
+	@:
 
-$(header-y) :		$(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(KBUILDFILES)
-	$(call cmd,headers_install)
+targets += $(check-file)
+$(check-file): scripts/headers_check.pl $(output-files) FORCE
+	$(call if_changed,check)
 
-$(unifdef-y) :		$(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(KBUILDFILES)
-	$(call cmd,unifdef)
-endif
 endif
 
-hdrinst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+# Recursion
+hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+.PHONY: $(subdirs)
+$(subdirs):
+	$(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(_dst)/$@
 
-.PHONY: altarch-dir
-# All the files in the normal arch dir must be created first, since we test
-# for their existence.
-altarch-dir: $(subdir-y) $(header-y) $(unifdef-y) $(objhdr-y)
-	$(Q)$(MAKE) $(hdrinst)=include/asm-$(ALTARCH) dst=include/asm-$(ALTARCH)
-	$(Q)$(MAKE) $(hdrinst)=include/asm dst=include/asm$(BIASMDIR)
+targets := $(wildcard $(sort $(targets)))
+cmd_files := $(wildcard \
+             $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
 
-# Recursion
-.PHONY: $(subdir-y)
-$(subdir-y):
-	$(Q)$(MAKE) $(hdrinst)=$(obj)/$@ dst=$(_dst)/$@ rel=../$(rel)
+ifneq ($(cmd_files),)
+	include $(cmd_files)
+endif
+
+.PHONY: $(PHONY)
+PHONY += FORCE
+FORCE: ;
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index ea48b82a3707..b4ca38a21158 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -96,6 +96,14 @@ basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
 modname_flags  = $(if $(filter 1,$(words $(modname))),\
                  -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")
 
+#hash values
+ifdef CONFIG_DYNAMIC_PRINTK_DEBUG
+debug_flags = -D"DEBUG_HASH=$(shell ./scripts/basic/hash djb2 $(@D)$(modname))"\
+              -D"DEBUG_HASH2=$(shell ./scripts/basic/hash r5 $(@D)$(modname))"
+else
+debug_flags =
+endif
+
 orig_c_flags   = $(KBUILD_CFLAGS) $(ccflags-y) $(CFLAGS_$(basetarget).o)
 _c_flags       = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
 _a_flags       = $(KBUILD_AFLAGS) $(asflags-y) $(AFLAGS_$(basetarget).o)
@@ -121,7 +129,8 @@ endif
 
 c_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(KBUILD_CPPFLAGS) \
 		 $(__c_flags) $(modkern_cflags) \
-		 -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags)
+		 -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags) \
+		  $(debug_flags)
 
 a_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(KBUILD_CPPFLAGS) \
 		 $(__a_flags) $(modkern_aflags)
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index 17092d6c7db3..9ee9783aea57 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -101,6 +101,7 @@ quiet_cmd_kernel-mod = MODPOST $@
       cmd_kernel-mod = $(modpost) $@
 
 vmlinux.o: FORCE
+	@rm -fr $(kernelmarkersfile)
 	$(call cmd,kernel-mod)
 
 # Declare generated files as targets for modpost
diff --git a/scripts/basic/.gitignore b/scripts/basic/.gitignore
index 7304e19782c7..bf8b199ec598 100644
--- a/scripts/basic/.gitignore
+++ b/scripts/basic/.gitignore
@@ -1,3 +1,3 @@
+hash
 fixdep
-split-include
 docproc
diff --git a/scripts/basic/Makefile b/scripts/basic/Makefile
index 4c324a1f1e0e..09559951df12 100644
--- a/scripts/basic/Makefile
+++ b/scripts/basic/Makefile
@@ -9,7 +9,7 @@
 # fixdep: 	 Used to generate dependency information during build process
 # docproc:	 Used in Documentation/DocBook
 
-hostprogs-y	:= fixdep docproc
+hostprogs-y	:= fixdep docproc hash
 always		:= $(hostprogs-y)
 
 # fixdep is needed to compile other host programs
diff --git a/scripts/basic/hash.c b/scripts/basic/hash.c
new file mode 100644
index 000000000000..3299ad7fc8c0
--- /dev/null
+++ b/scripts/basic/hash.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2008 Red Hat, Inc., Jason Baron <jbaron@redhat.com>
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#define DYNAMIC_DEBUG_HASH_BITS 6
+
+static const char *program;
+
+static void usage(void)
+{
+	printf("Usage: %s <djb2|r5> <modname>\n", program);
+	exit(1);
+}
+
+/* djb2 hashing algorithm by Dan Bernstein. From:
+ * http://www.cse.yorku.ca/~oz/hash.html
+ */
+
+unsigned int djb2_hash(char *str)
+{
+	unsigned long hash = 5381;
+	int c;
+
+	c = *str;
+	while (c) {
+		hash = ((hash << 5) + hash) + c;
+		c = *++str;
+	}
+	return (unsigned int)(hash & ((1 << DYNAMIC_DEBUG_HASH_BITS) - 1));
+}
+
+unsigned int r5_hash(char *str)
+{
+	unsigned long hash = 0;
+	int c;
+
+	c = *str;
+	while (c) {
+		hash = (hash + (c << 4) + (c >> 4)) * 11;
+		c = *++str;
+	}
+	return (unsigned int)(hash & ((1 << DYNAMIC_DEBUG_HASH_BITS) - 1));
+}
+
+int main(int argc, char *argv[])
+{
+	program = argv[0];
+
+	if (argc != 3)
+		usage();
+	if (!strcmp(argv[1], "djb2"))
+		printf("%d\n", djb2_hash(argv[2]));
+	else if (!strcmp(argv[1], "r5"))
+		printf("%d\n", r5_hash(argv[2]));
+	else
+		usage();
+	exit(0);
+}
+
diff --git a/scripts/bootgraph.pl b/scripts/bootgraph.pl
new file mode 100644
index 000000000000..5e7316e5aa39
--- /dev/null
+++ b/scripts/bootgraph.pl
@@ -0,0 +1,149 @@
+#!/usr/bin/perl
+
+# Copyright 2008, Intel Corporation
+#
+# This file is part of the Linux kernel
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+# Authors:
+# 	Arjan van de Ven <arjan@linux.intel.com>
+
+
+#
+# This script turns a dmesg output into a SVG graphic that shows which
+# functions take how much time. You can view SVG graphics with various
+# programs, including Inkscape, The Gimp and Firefox.
+#
+#
+# For this script to work, the kernel needs to be compiled with the
+# CONFIG_PRINTK_TIME configuration option enabled, and with
+# "initcall_debug" passed on the kernel command line.
+#
+# usage:
+# 	dmesg | perl scripts/bootgraph.pl > output.svg
+#
+
+my %start, %end;
+my $done = 0;
+my $maxtime = 0;
+my $firsttime = 100;
+my $count = 0;
+my %pids;
+
+while (<>) {
+	my $line = $_;
+	if ($line =~ /([0-9\.]+)\] calling  ([a-zA-Z0-9\_]+)\+/) {
+		my $func = $2;
+		if ($done == 0) {
+			$start{$func} = $1;
+			if ($1 < $firsttime) {
+				$firsttime = $1;
+			}
+		}
+		if ($line =~ /\@ ([0-9]+)/) {
+			$pids{$func} = $1;
+		}
+		$count = $count + 1;
+	}
+
+	if ($line =~ /([0-9\.]+)\] initcall ([a-zA-Z0-9\_]+)\+.*returned/) {
+		if ($done == 0) {
+			$end{$2} = $1;
+			$maxtime = $1;
+		}
+	}
+	if ($line =~ /Write protecting the/) {
+		$done = 1;
+	}
+	if ($line =~ /Freeing unused kernel memory/) {
+		$done = 1;
+	}
+}
+
+if ($count == 0) {
+	print "No data found in the dmesg. Make sure that 'printk.time=1' and\n";
+	print "'initcall_debug' are passed on the kernel command line.\n\n";
+	print "Usage: \n";
+	print "      dmesg | perl scripts/bootgraph.pl > output.svg\n\n";
+	exit;
+}
+
+print "<?xml version=\"1.0\" standalone=\"no\"?> \n";
+print "<svg width=\"1000\" height=\"100%\" version=\"1.1\" xmlns=\"http://www.w3.org/2000/svg\">\n";
+
+my @styles;
+
+$styles[0] = "fill:rgb(0,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[1] = "fill:rgb(0,255,0);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[2] = "fill:rgb(255,0,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[3] = "fill:rgb(255,255,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[4] = "fill:rgb(255,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[5] = "fill:rgb(0,255,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[6] = "fill:rgb(0,128,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[7] = "fill:rgb(0,255,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[8] = "fill:rgb(255,0,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[9] = "fill:rgb(255,255,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[10] = "fill:rgb(255,128,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[11] = "fill:rgb(128,255,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+
+my $mult = 950.0 / ($maxtime - $firsttime);
+my $threshold = ($maxtime - $firsttime) / 60.0;
+my $stylecounter = 0;
+my %rows;
+my $rowscount = 1;
+while (($key,$value) = each %start) {
+	my $duration = $end{$key} - $start{$key};
+
+	if ($duration >= $threshold) {
+		my $s, $s2, $e, $y;
+		$pid = $pids{$key};
+
+		if (!defined($rows{$pid})) {
+			$rows{$pid} = $rowscount;
+			$rowscount = $rowscount + 1;
+		}
+		$s = ($value - $firsttime) * $mult;
+		$s2 = $s + 6;
+		$e = ($end{$key} - $firsttime) * $mult;
+		$w = $e - $s;
+
+		$y = $rows{$pid} * 150;
+		$y2 = $y + 4;
+
+		$style = $styles[$stylecounter];
+		$stylecounter = $stylecounter + 1;
+		if ($stylecounter > 11) {
+			$stylecounter = 0;
+		};
+
+		print "<rect x=\"$s\" width=\"$w\" y=\"$y\" height=\"145\" style=\"$style\"/>\n";
+		print "<text transform=\"translate($s2,$y2) rotate(90)\">$key</text>\n";
+	}
+}
+
+
+# print the time line on top
+my $time = $firsttime;
+my $step = ($maxtime - $firsttime) / 15;
+while ($time < $maxtime) {
+	my $s2 = ($time - $firsttime) * $mult;
+	my $tm = int($time * 100) / 100.0;
+	print "<text transform=\"translate($s2,89) rotate(90)\">$tm</text>\n";
+	$time = $time + $step;
+}
+
+print "</svg>\n";
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 6971bf078d13..f88bb3e21cda 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1,5 +1,5 @@
 #!/usr/bin/perl -w
-# (c) 2001, Dave Jones. <davej@codemonkey.org.uk> (the file handling bit)
+# (c) 2001, Dave Jones. <davej@redhat.com> (the file handling bit)
 # (c) 2005, Joel Schopp <jschopp@austin.ibm.com> (the ugly bit)
 # (c) 2007, Andy Whitcroft <apw@uk.ibm.com> (new conditions, test suite, etc)
 # Licensed under the terms of the GNU GPL License version 2
@@ -9,7 +9,7 @@ use strict;
 my $P = $0;
 $P =~ s@.*/@@g;
 
-my $V = '0.19';
+my $V = '0.24';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
@@ -17,7 +17,6 @@ my $quiet = 0;
 my $tree = 1;
 my $chk_signoff = 1;
 my $chk_patch = 1;
-my $tst_type = 0;
 my $tst_only;
 my $emacs = 0;
 my $terse = 0;
@@ -44,7 +43,6 @@ GetOptions(
 	'summary-file!'	=> \$summary_file,
 
 	'debug=s'	=> \%debug,
-	'test-type!'	=> \$tst_type,
 	'test-only=s'	=> \$tst_only,
 ) or exit;
 
@@ -67,6 +65,8 @@ if ($#ARGV < 0) {
 
 my $dbg_values = 0;
 my $dbg_possible = 0;
+my $dbg_type = 0;
+my $dbg_attr = 0;
 for my $key (keys %debug) {
 	eval "\${dbg_$key} = '$debug{$key}';"
 }
@@ -113,7 +113,10 @@ our $Attribute	= qr{
 			const|
 			__read_mostly|
 			__kprobes|
-			__(?:mem|cpu|dev|)(?:initdata|init)
+			__(?:mem|cpu|dev|)(?:initdata|init)|
+			____cacheline_aligned|
+			____cacheline_aligned_in_smp|
+			____cacheline_internodealigned_in_smp
 		  }x;
 our $Modifier;
 our $Inline	= qr{inline|__always_inline|noinline};
@@ -143,6 +146,11 @@ our $UTF8	= qr {
 	|  \xF4[\x80-\x8F][\x80-\xBF]{2}     # plane 16
 }x;
 
+our $typeTypedefs = qr{(?x:
+	(?:__)?(?:u|s|be|le)(?:\d|\d\d)|
+	atomic_t
+)};
+
 our @typeList = (
 	qr{void},
 	qr{(?:unsigned\s+)?char},
@@ -156,7 +164,6 @@ our @typeList = (
 	qr{float},
 	qr{double},
 	qr{bool},
-	qr{(?:__)?(?:u|s|be|le)(?:8|16|32|64)},
 	qr{struct\s+$Ident},
 	qr{union\s+$Ident},
 	qr{enum\s+$Ident},
@@ -169,24 +176,24 @@ our @modifierList = (
 );
 
 sub build_types {
-	my $mods = "(?:  \n" . join("|\n  ", @modifierList) . "\n)";
-	my $all = "(?:  \n" . join("|\n  ", @typeList) . "\n)";
+	my $mods = "(?x:  \n" . join("|\n  ", @modifierList) . "\n)";
+	my $all = "(?x:  \n" . join("|\n  ", @typeList) . "\n)";
+	$Modifier	= qr{(?:$Attribute|$Sparse|$mods)};
 	$NonptrType	= qr{
-			(?:const\s+)?
-			(?:$mods\s+)?
+			(?:$Modifier\s+|const\s+)*
 			(?:
 				(?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)|
+				(?:$typeTypedefs\b)|
 				(?:${all}\b)
 			)
-			(?:\s+$Sparse|\s+const)*
+			(?:\s+$Modifier|\s+const)*
 		  }x;
 	$Type	= qr{
 			$NonptrType
 			(?:\s*\*+\s*const|\s*\*+|(?:\s*\[\s*\])+)?
-			(?:\s+$Inline|\s+$Sparse|\s+$Attribute|\s+$mods)*
+			(?:\s+$Inline|\s+$Modifier)*
 		  }x;
 	$Declare	= qr{(?:$Storage\s+)?$Type};
-	$Modifier	= qr{(?:$Attribute|$Sparse|$mods)};
 }
 build_types();
 
@@ -333,7 +340,7 @@ sub sanitise_line {
 			$off++;
 			next;
 		}
-		if (substr($line, $off, 2) eq '*/') {
+		if ($sanitise_quote eq '*/' && substr($line, $off, 2) eq '*/') {
 			$sanitise_quote = '';
 			substr($res, $off, 2, "$;$;");
 			$off++;
@@ -406,6 +413,7 @@ sub ctx_statement_block {
 		# context.
 		if ($off >= $len) {
 			for (; $remain > 0; $line++) {
+				last if (!defined $lines[$line]);
 				next if ($lines[$line] =~ /^-/);
 				$remain--;
 				$loff = $len;
@@ -470,7 +478,9 @@ sub ctx_statement_block {
 		}
 		$off++;
 	}
+	# We are truly at the end, so shuffle to the next line.
 	if ($off == $len) {
+		$loff = $len + 1;
 		$line++;
 		$remain--;
 	}
@@ -631,7 +641,7 @@ sub ctx_locate_comment {
 	my ($first_line, $end_line) = @_;
 
 	# Catch a comment on the end of the line itself.
-	my ($current_comment) = ($rawlines[$end_line - 1] =~ m@.*(/\*.*\*/)\s*$@);
+	my ($current_comment) = ($rawlines[$end_line - 1] =~ m@.*(/\*.*\*/)\s*(?:\\\s*)?$@);
 	return $current_comment if (defined $current_comment);
 
 	# Look through the context and try and figure out if there is a
@@ -669,6 +679,22 @@ sub ctx_has_comment {
 	return ($cmt ne '');
 }
 
+sub raw_line {
+	my ($linenr, $cnt) = @_;
+
+	my $offset = $linenr - 1;
+	$cnt++;
+
+	my $line;
+	while ($cnt) {
+		$line = $rawlines[$offset++];
+		next if (defined($line) && $line =~ /^-/);
+		$cnt--;
+	}
+
+	return $line;
+}
+
 sub cat_vet {
 	my ($vet) = @_;
 	my ($res, $coded);
@@ -689,17 +715,20 @@ sub cat_vet {
 my $av_preprocessor = 0;
 my $av_pending;
 my @av_paren_type;
+my $av_pend_colon;
 
 sub annotate_reset {
 	$av_preprocessor = 0;
 	$av_pending = '_';
 	@av_paren_type = ('E');
+	$av_pend_colon = 'O';
 }
 
 sub annotate_values {
 	my ($stream, $type) = @_;
 
 	my $res;
+	my $var = '_' x length($stream);
 	my $cur = $stream;
 
 	print "$stream\n" if ($dbg_values > 1);
@@ -715,10 +744,14 @@ sub annotate_values {
 				$av_preprocessor = 0;
 			}
 
-		} elsif ($cur =~ /^($Type)/) {
+		} elsif ($cur =~ /^($Type)\s*(?:$Ident|,|\)|\()/) {
 			print "DECLARE($1)\n" if ($dbg_values > 1);
 			$type = 'T';
 
+		} elsif ($cur =~ /^($Modifier)\s*/) {
+			print "MODIFIER($1)\n" if ($dbg_values > 1);
+			$type = 'T';
+
 		} elsif ($cur =~ /^(\#\s*define\s*$Ident)(\(?)/o) {
 			print "DEFINE($1,$2)\n" if ($dbg_values > 1);
 			$av_preprocessor = 1;
@@ -775,12 +808,17 @@ sub annotate_values {
 			}
 			$type = 'N';
 
-		} elsif ($cur =~ /^(if|while|typeof|__typeof__|for)\b/o) {
+		} elsif ($cur =~ /^(if|while|for)\b/o) {
 			print "COND($1)\n" if ($dbg_values > 1);
-			$av_pending = 'N';
+			$av_pending = 'E';
 			$type = 'N';
 
-		} elsif ($cur =~/^(return|case|else)/o) {
+		} elsif ($cur =~/^(case)/o) {
+			print "CASE($1)\n" if ($dbg_values > 1);
+			$av_pend_colon = 'C';
+			$type = 'N';
+
+		} elsif ($cur =~/^(return|else|goto|typeof|__typeof__)\b/o) {
 			print "KEYWORD($1)\n" if ($dbg_values > 1);
 			$type = 'N';
 
@@ -800,10 +838,20 @@ sub annotate_values {
 				print "PAREN('$1')\n" if ($dbg_values > 1);
 			}
 
-		} elsif ($cur =~ /^($Ident)\(/o) {
+		} elsif ($cur =~ /^($Ident)\s*\(/o) {
 			print "FUNC($1)\n" if ($dbg_values > 1);
+			$type = 'V';
 			$av_pending = 'V';
 
+		} elsif ($cur =~ /^($Ident\s*):/) {
+			if ($type eq 'E') {
+				$av_pend_colon = 'L';
+			} elsif ($type eq 'T') {
+				$av_pend_colon = 'B';
+			}
+			print "IDENT_COLON($1,$type>$av_pend_colon)\n" if ($dbg_values > 1);
+			$type = 'V';
+
 		} elsif ($cur =~ /^($Ident|$Constant)/o) {
 			print "IDENT($1)\n" if ($dbg_values > 1);
 			$type = 'V';
@@ -815,11 +863,40 @@ sub annotate_values {
 		} elsif ($cur =~/^(;|{|})/) {
 			print "END($1)\n" if ($dbg_values > 1);
 			$type = 'E';
+			$av_pend_colon = 'O';
+
+		} elsif ($cur =~ /^(\?)/o) {
+			print "QUESTION($1)\n" if ($dbg_values > 1);
+			$type = 'N';
+
+		} elsif ($cur =~ /^(:)/o) {
+			print "COLON($1,$av_pend_colon)\n" if ($dbg_values > 1);
+
+			substr($var, length($res), 1, $av_pend_colon);
+			if ($av_pend_colon eq 'C' || $av_pend_colon eq 'L') {
+				$type = 'E';
+			} else {
+				$type = 'N';
+			}
+			$av_pend_colon = 'O';
 
-		} elsif ($cur =~ /^(;|\?|:|\[)/o) {
+		} elsif ($cur =~ /^(;|\[)/o) {
 			print "CLOSE($1)\n" if ($dbg_values > 1);
 			$type = 'N';
 
+		} elsif ($cur =~ /^(-(?![->])|\+(?!\+)|\*|\&\&|\&)/o) {
+			my $variant;
+
+			print "OPV($1)\n" if ($dbg_values > 1);
+			if ($type eq 'V') {
+				$variant = 'B';
+			} else {
+				$variant = 'U';
+			}
+
+			substr($var, length($res), 1, $variant);
+			$type = 'N';
+
 		} elsif ($cur =~ /^($Operators)/o) {
 			print "OP($1)\n" if ($dbg_values > 1);
 			if ($1 ne '++' && $1 ne '--') {
@@ -835,18 +912,28 @@ sub annotate_values {
 		}
 	}
 
-	return $res;
+	return ($res, $var);
 }
 
 sub possible {
 	my ($possible, $line) = @_;
 
-	print "CHECK<$possible> ($line)\n" if ($dbg_possible > 1);
-	if ($possible !~ /^(?:$Storage|$Type|DEFINE_\S+)$/ &&
-	    $possible ne 'goto' && $possible ne 'return' &&
-	    $possible ne 'case' && $possible ne 'else' &&
-	    $possible ne 'asm' &&
-	    $possible !~ /^(typedef|struct|enum)\b/) {
+	print "CHECK<$possible> ($line)\n" if ($dbg_possible > 2);
+	if ($possible !~ /(?:
+		^(?:
+			$Modifier|
+			$Storage|
+			$Type|
+			DEFINE_\S+|
+			goto|
+			return|
+			case|
+			else|
+			asm|__asm__|
+			do
+		)$|
+		^(?:typedef|struct|enum)\b
+	    )/x) {
 		# Check for modifiers.
 		$possible =~ s/\s*$Storage\s*//g;
 		$possible =~ s/\s*$Sparse\s*//g;
@@ -854,14 +941,18 @@ sub possible {
 
 		} elsif ($possible =~ /\s/) {
 			$possible =~ s/\s*$Type\s*//g;
-			warn "MODIFIER: $possible ($line)\n" if ($dbg_possible);
-			push(@modifierList, $possible);
+			for my $modifier (split(' ', $possible)) {
+				warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible);
+				push(@modifierList, $modifier);
+			}
 
 		} else {
 			warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible);
 			push(@typeList, $possible);
 		}
 		build_types();
+	} else {
+		warn "NOTPOSS: $possible ($line)\n" if ($dbg_possible > 1);
 	}
 }
 
@@ -901,6 +992,33 @@ sub CHK {
 	}
 }
 
+sub check_absolute_file {
+	my ($absolute, $herecurr) = @_;
+	my $file = $absolute;
+
+	##print "absolute<$absolute>\n";
+
+	# See if any suffix of this path is a path within the tree.
+	while ($file =~ s@^[^/]*/@@) {
+		if (-f "$root/$file") {
+			##print "file<$file>\n";
+			last;
+		}
+	}
+	if (! -f _)  {
+		return 0;
+	}
+
+	# It is, so see if the prefix is acceptable.
+	my $prefix = $absolute;
+	substr($prefix, -length($file)) = '';
+
+	##print "prefix<$prefix>\n";
+	if ($prefix ne ".../") {
+		WARN("use relative pathname instead of absolute in changelog text\n" . $herecurr);
+	}
+}
+
 sub process {
 	my $filename = shift;
 
@@ -938,6 +1056,7 @@ sub process {
 
 	# suppression flags
 	my %suppress_ifbraces;
+	my %suppress_whiletrailers;
 
 	# Pre-scan the patch sanitizing the lines.
 	# Pre-scan the patch looking for any __setup documentation.
@@ -972,9 +1091,14 @@ sub process {
 			# edge is a close comment then we must be in a comment
 			# at context start.
 			my $edge;
-			for (my $ln = $linenr + 1; $ln < ($linenr + $realcnt); $ln++) {
-				next if ($line =~ /^-/);
-				($edge) = ($rawlines[$ln - 1] =~ m@(/\*|\*/)@);
+			my $cnt = $realcnt;
+			for (my $ln = $linenr + 1; $cnt > 0; $ln++) {
+				next if (defined $rawlines[$ln - 1] &&
+					 $rawlines[$ln - 1] =~ /^-/);
+				$cnt--;
+				#print "RAW<$rawlines[$ln - 1]>\n";
+				($edge) = (defined $rawlines[$ln - 1] &&
+					$rawlines[$ln - 1] =~ m@(/\*|\*/)@);
 				last if (defined $edge);
 			}
 			if (defined $edge && $edge eq '*/') {
@@ -1022,6 +1146,7 @@ sub process {
 		$linenr++;
 
 		my $rawline = $rawlines[$linenr - 1];
+		my $hunk_line = ($realcnt != 0);
 
 #extract the line range in the file after the patch is applied
 		if ($line=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
@@ -1037,6 +1162,7 @@ sub process {
 			$prev_values = 'E';
 
 			%suppress_ifbraces = ();
+			%suppress_whiletrailers = ();
 			next;
 
 # track the line number as we move through the hunk, note that
@@ -1072,7 +1198,7 @@ sub process {
 			$realfile = $1;
 			$realfile =~ s@^[^/]*/@@;
 
-			if ($realfile =~ m@include/asm/@) {
+			if ($realfile =~ m@^include/asm/@) {
 				ERROR("do not modify files in include/asm, change architecture specific files in include/asm-<architecture>\n" . "$here$rawline\n");
 			}
 			next;
@@ -1106,6 +1232,20 @@ sub process {
 				$herecurr) if (!$emitted_corrupt++);
 		}
 
+# Check for absolute kernel paths.
+		if ($tree) {
+			while ($line =~ m{(?:^|\s)(/\S*)}g) {
+				my $file = $1;
+
+				if ($file =~ m{^(.*?)(?::\d+)+:?$} &&
+				    check_absolute_file($1, $herecurr)) {
+					#
+				} else {
+					check_absolute_file($file, $herecurr);
+				}
+			}
+		}
+
 # UTF-8 regex found at http://www.w3.org/International/questions/qa-forms-utf-8.en.php
 		if (($realfile =~ /^$/ || $line =~ /^\+/) &&
 		    $rawline !~ m/^$UTF8*$/) {
@@ -1118,11 +1258,8 @@ sub process {
 			ERROR("Invalid UTF-8, patch and commit message should be encoded in UTF-8\n" . $hereptr);
 		}
 
-#ignore lines being removed
-		if ($line=~/^-/) {next;}
-
-# check we are in a valid source file if not then ignore this hunk
-		next if ($realfile !~ /\.(h|c|s|S|pl|sh)$/);
+# ignore non-hunk lines and lines being removed
+		next if (!$hunk_line || $line =~ /^-/);
 
 #trailing whitespace
 		if ($line =~ /^\+.*\015/) {
@@ -1133,9 +1270,15 @@ sub process {
 			my $herevet = "$here\n" . cat_vet($rawline) . "\n";
 			ERROR("trailing whitespace\n" . $herevet);
 		}
+
+# check we are in a valid source file if not then ignore this hunk
+		next if ($realfile !~ /\.(h|c|s|S|pl|sh)$/);
+
 #80 column limit
 		if ($line =~ /^\+/ && $prevrawline !~ /\/\*\*/ &&
-		    $rawline !~ /^.\s*\*\s*\@$Ident\s/ && $length > 80)
+		    $rawline !~ /^.\s*\*\s*\@$Ident\s/ &&
+		    $line !~ /^\+\s*printk\s*\(\s*(?:KERN_\S+\s*)?"[X\t]*"\s*(?:,|\)\s*;)\s*$/ &&
+		    $length > 80)
 		{
 			WARN("line over 80 characters\n" . $herecurr);
 		}
@@ -1145,8 +1288,8 @@ sub process {
 			WARN("adding a line without newline at end of file\n" . $herecurr);
 		}
 
-# check we are in a valid source file *.[hc] if not then ignore this hunk
-		next if ($realfile !~ /\.[hc]$/);
+# check we are in a valid source file C or perl if not then ignore this hunk
+		next if ($realfile !~ /\.(h|c|pl)$/);
 
 # at the beginning of a line any tabs must come first and anything
 # more than 8 must use tabs.
@@ -1156,16 +1299,19 @@ sub process {
 			ERROR("code indent should use tabs where possible\n" . $herevet);
 		}
 
+# check we are in a valid C source file if not then ignore this hunk
+		next if ($realfile !~ /\.(h|c)$/);
+
 # check for RCS/CVS revision markers
 		if ($rawline =~ /^\+.*\$(Revision|Log|Id)(?:\$|)/) {
 			WARN("CVS style keyword markers, these will _not_ be updated\n". $herecurr);
 		}
 
 # Check for potential 'bare' types
-		my ($stat, $cond);
+		my ($stat, $cond, $line_nr_next, $remain_next, $off_next);
 		if ($realcnt && $line =~ /.\s*\S/) {
-			($stat, $cond) = ctx_statement_block($linenr,
-								$realcnt, 0);
+			($stat, $cond, $line_nr_next, $remain_next, $off_next) =
+				ctx_statement_block($linenr, $realcnt, 0);
 			$stat =~ s/\n./\n /g;
 			$cond =~ s/\n./\n /g;
 
@@ -1179,13 +1325,13 @@ sub process {
 			} elsif ($s =~ /^.\s*$Ident\s*\(/s) {
 
 			# declarations always start with types
-			} elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?((?:\s*$Ident)+)\b(?:\s+$Sparse)?\s*\**\s*(?:$Ident|\(\*[^\)]*\))\s*(?:;|=|,|\()/s) {
+			} elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?((?:\s*$Ident)+?)\b(?:\s+$Sparse)?\s*\**\s*(?:$Ident|\(\*[^\)]*\))(?:\s*$Modifier)?\s*(?:;|=|,|\()/s) {
 				my $type = $1;
 				$type =~ s/\s+/ /g;
 				possible($type, "A:" . $s);
 
 			# definitions in global scope can only start with types
-			} elsif ($s =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b/s) {
+			} elsif ($s =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b\s*(?!:)/s) {
 				possible($1, "B:" . $s);
 			}
 
@@ -1246,17 +1392,22 @@ sub process {
 			my $pre_ctx = "$1$2";
 
 			my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0);
-			my $ctx_ln = $linenr + $#ctx + 1;
 			my $ctx_cnt = $realcnt - $#ctx - 1;
 			my $ctx = join("\n", @ctx);
 
-			##warn "realcnt<$realcnt> ctx_cnt<$ctx_cnt>\n";
+			my $ctx_ln = $linenr;
+			my $ctx_skip = $realcnt;
 
-			# Skip over any removed lines in the context following statement.
-			while (defined($lines[$ctx_ln - 1]) && $lines[$ctx_ln - 1] =~ /^-/) {
+			while ($ctx_skip > $ctx_cnt || ($ctx_skip == $ctx_cnt &&
+					defined $lines[$ctx_ln - 1] &&
+					$lines[$ctx_ln - 1] =~ /^-/)) {
+				##print "SKIP<$ctx_skip> CNT<$ctx_cnt>\n";
+				$ctx_skip-- if (!defined $lines[$ctx_ln - 1] || $lines[$ctx_ln - 1] !~ /^-/);
 				$ctx_ln++;
 			}
-			##warn "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n";
+
+			#print "realcnt<$realcnt> ctx_cnt<$ctx_cnt>\n";
+			#print "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n";
 
 			if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
 				ERROR("that open brace { should be on the previous line\n" .
@@ -1274,14 +1425,101 @@ sub process {
 			}
 		}
 
+# Check relative indent for conditionals and blocks.
+		if ($line =~ /\b(?:(?:if|while|for)\s*\(|do\b)/ && $line !~ /^.\s*#/ && $line !~ /\}\s*while\s*/) {
+			my ($s, $c) = ($stat, $cond);
+
+			substr($s, 0, length($c), '');
+
+			# Make sure we remove the line prefixes as we have
+			# none on the first line, and are going to readd them
+			# where necessary.
+			$s =~ s/\n./\n/gs;
+
+			# Find out how long the conditional actually is.
+			my @newlines = ($c =~ /\n/gs);
+			my $cond_lines = 1 + $#newlines;
+
+			# We want to check the first line inside the block
+			# starting at the end of the conditional, so remove:
+			#  1) any blank line termination
+			#  2) any opening brace { on end of the line
+			#  3) any do (...) {
+			my $continuation = 0;
+			my $check = 0;
+			$s =~ s/^.*\bdo\b//;
+			$s =~ s/^\s*{//;
+			if ($s =~ s/^\s*\\//) {
+				$continuation = 1;
+			}
+			if ($s =~ s/^\s*?\n//) {
+				$check = 1;
+				$cond_lines++;
+			}
+
+			# Also ignore a loop construct at the end of a
+			# preprocessor statement.
+			if (($prevline =~ /^.\s*#\s*define\s/ ||
+			    $prevline =~ /\\\s*$/) && $continuation == 0) {
+				$check = 0;
+			}
+
+			my $cond_ptr = -1;
+			$continuation = 0;
+			while ($cond_ptr != $cond_lines) {
+				$cond_ptr = $cond_lines;
+
+				# If we see an #else/#elif then the code
+				# is not linear.
+				if ($s =~ /^\s*\#\s*(?:else|elif)/) {
+					$check = 0;
+				}
+
+				# Ignore:
+				#  1) blank lines, they should be at 0,
+				#  2) preprocessor lines, and
+				#  3) labels.
+				if ($continuation ||
+				    $s =~ /^\s*?\n/ ||
+				    $s =~ /^\s*#\s*?/ ||
+				    $s =~ /^\s*$Ident\s*:/) {
+					$continuation = ($s =~ /^.*?\\\n/) ? 1 : 0;
+					$s =~ s/^.*?\n//;
+					$cond_lines++;
+				}
+			}
+
+			my (undef, $sindent) = line_stats("+" . $s);
+			my $stat_real = raw_line($linenr, $cond_lines);
+
+			# Check if either of these lines are modified, else
+			# this is not this patch's fault.
+			if (!defined($stat_real) ||
+			    $stat !~ /^\+/ && $stat_real !~ /^\+/) {
+				$check = 0;
+			}
+			if (defined($stat_real) && $cond_lines > 1) {
+				$stat_real = "[...]\n$stat_real";
+			}
+
+			#print "line<$line> prevline<$prevline> indent<$indent> sindent<$sindent> check<$check> continuation<$continuation> s<$s> cond_lines<$cond_lines> stat_real<$stat_real> stat<$stat>\n";
+
+			if ($check && (($sindent % 8) != 0 ||
+			    ($sindent <= $indent && $s ne ''))) {
+				WARN("suspect code indent for conditional statements ($indent, $sindent)\n" . $herecurr . "$stat_real\n");
+			}
+		}
+
 		# Track the 'values' across context and added lines.
 		my $opline = $line; $opline =~ s/^./ /;
-		my $curr_values = annotate_values($opline . "\n", $prev_values);
+		my ($curr_values, $curr_vars) =
+				annotate_values($opline . "\n", $prev_values);
 		$curr_values = $prev_values . $curr_values;
 		if ($dbg_values) {
 			my $outline = $opline; $outline =~ s/\t/ /g;
 			print "$linenr > .$outline\n";
 			print "$linenr > $curr_values\n";
+			print "$linenr >  $curr_vars\n";
 		}
 		$prev_values = substr($curr_values, -1);
 
@@ -1289,8 +1527,21 @@ sub process {
 		if ($line=~/^[^\+]/) {next;}
 
 # TEST: allow direct testing of the type matcher.
-		if ($tst_type && $line =~ /^.$Declare$/) {
-			ERROR("TEST: is type $Declare\n" . $herecurr);
+		if ($dbg_type) {
+			if ($line =~ /^.\s*$Declare\s*$/) {
+				ERROR("TEST: is type\n" . $herecurr);
+			} elsif ($dbg_type > 1 && $line =~ /^.+($Declare)/) {
+				ERROR("TEST: is not type ($1 is)\n". $herecurr);
+			}
+			next;
+		}
+# TEST: allow direct testing of the attribute matcher.
+		if ($dbg_attr) {
+			if ($line =~ /^.\s*$Attribute\s*$/) {
+				ERROR("TEST: is attr\n" . $herecurr);
+			} elsif ($dbg_attr > 1 && $line =~ /^.+($Attribute)/) {
+				ERROR("TEST: is not attr ($1 is)\n". $herecurr);
+			}
 			next;
 		}
 
@@ -1325,13 +1576,14 @@ sub process {
 		if (($line =~ /EXPORT_SYMBOL.*\((.*)\)/) ||
 		    ($line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) {
 			my $name = $1;
-			if (($prevline !~ /^}/) &&
-			   ($prevline !~ /^\+}/) &&
-			   ($prevline !~ /^ }/) &&
-			   ($prevline !~ /^.DECLARE_$Ident\(\Q$name\E\)/) &&
-			   ($prevline !~ /^.LIST_HEAD\(\Q$name\E\)/) &&
-			   ($prevline !~ /^.$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(/) &&
-			   ($prevline !~ /\b\Q$name\E(?:\s+$Attribute)?\s*(?:;|=|\[)/)) {
+			if ($prevline !~ /(?:
+				^.}|
+				^.DEFINE_$Ident\(\Q$name\E\)|
+				^.DECLARE_$Ident\(\Q$name\E\)|
+				^.LIST_HEAD\(\Q$name\E\)|
+				^.$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(|
+				\b\Q$name\E(?:\s+$Attribute)?\s*(?:;|=|\[)
+			    )/x) {
 				WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr);
 			}
 		}
@@ -1352,6 +1604,7 @@ sub process {
 		if ($line =~ /\btypedef\s/ &&
 		    $line !~ /\btypedef\s+$Type\s+\(\s*\*?$Ident\s*\)\s*\(/ &&
 		    $line !~ /\btypedef\s+$Type\s+$Ident\s*\(/ &&
+		    $line !~ /\b$typeTypedefs\b/ &&
 		    $line !~ /\b__bitwise(?:__|)\b/) {
 			WARN("do not add new typedefs\n" . $herecurr);
 		}
@@ -1365,11 +1618,11 @@ sub process {
 			ERROR("\"(foo $1 )\" should be \"(foo $1)\"\n" .
 				$herecurr);
 
-		} elsif ($line =~ m{$NonptrType(\*+)(?:\s+(?:$Attribute|$Sparse))?\s+[A-Za-z\d_]+}) {
+		} elsif ($line =~ m{\b$NonptrType(\*+)(?:\s+(?:$Attribute|$Sparse))?\s+[A-Za-z\d_]+}) {
 			ERROR("\"foo$1 bar\" should be \"foo $1bar\"\n" .
 				$herecurr);
 
-		} elsif ($line =~ m{$NonptrType\s+(\*+)(?!\s+(?:$Attribute|$Sparse))\s+[A-Za-z\d_]+}) {
+		} elsif ($line =~ m{\b$NonptrType\s+(\*+)(?!\s+(?:$Attribute|$Sparse))\s+[A-Za-z\d_]+}) {
 			ERROR("\"foo $1 bar\" should be \"foo $1bar\"\n" .
 				$herecurr);
 		}
@@ -1421,6 +1674,19 @@ sub process {
 			ERROR("open brace '{' following $1 go on the same line\n" . $hereprev);
 		}
 
+# check for spacing round square brackets; allowed:
+#  1. with a type on the left -- int [] a;
+#  2. at the beginning of a line for slice initialisers -- [0...10] = 5,
+#  3. inside a curly brace -- = { [0...10] = 5 }
+		while ($line =~ /(.*?\s)\[/g) {
+			my ($where, $prefix) = ($-[1], $1);
+			if ($prefix !~ /$Type\s+$/ &&
+			    ($where != 0 || $prefix !~ /^.\s+$/) &&
+			    $prefix !~ /{\s+$/) {
+				ERROR("space prohibited before open square bracket '['\n" . $herecurr);
+			}
+		}
+
 # check for spaces between functions and their parentheses.
 		while ($line =~ /($Ident)\s+\(/g) {
 			my $name = $1;
@@ -1457,7 +1723,8 @@ sub process {
 				<<=|>>=|<=|>=|==|!=|
 				\+=|-=|\*=|\/=|%=|\^=|\|=|&=|
 				=>|->|<<|>>|<|>|=|!|~|
-				&&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/|%
+				&&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/|%|
+				\?|:
 			}x;
 			my @elements = split(/($ops|;)/, $opline);
 			my $off = 0;
@@ -1504,22 +1771,11 @@ sub process {
 				my $ptr = substr($blank, 0, $off) . "^";
 				my $hereptr = "$hereline$ptr\n";
 
-				# Classify operators into binary, unary, or
-				# definitions (* only) where they have more
-				# than one mode.
+				# Pull out the value of this operator.
 				my $op_type = substr($curr_values, $off + 1, 1);
-				my $op_left = substr($curr_values, $off, 1);
-				my $is_unary;
-				if ($op_type eq 'T') {
-					$is_unary = 2;
-				} elsif ($op_left eq 'V') {
-					$is_unary = 0;
-				} else {
-					$is_unary = 1;
-				}
-				#if ($op eq '-' || $op eq '&' || $op eq '*') {
-				#	print "UNARY: <$op_left$op_type $is_unary $a:$op:$c> <$ca:$op:$cc> <$unary_ctx>\n";
-				#}
+
+				# Get the full operator variant.
+				my $opv = $op . substr($curr_vars, $off, 1);
 
 				# Ignore operators passed as parameters.
 				if ($op_type ne 'V' &&
@@ -1538,8 +1794,10 @@ sub process {
 				# // is a comment
 				} elsif ($op eq '//') {
 
-				# -> should have no spaces
-				} elsif ($op eq '->') {
+				# No spaces for:
+				#   ->
+				#   :   when part of a bitfield
+				} elsif ($op eq '->' || $opv eq ':B') {
 					if ($ctx =~ /Wx.|.xW/) {
 						ERROR("spaces prohibited around that '$op' $at\n" . $hereptr);
 					}
@@ -1551,18 +1809,19 @@ sub process {
 					}
 
 				# '*' as part of a type definition -- reported already.
-				} elsif ($op eq '*' && $is_unary == 2) {
+				} elsif ($opv eq '*_') {
 					#warn "'*' is part of type\n";
 
 				# unary operators should have a space before and
 				# none after.  May be left adjacent to another
 				# unary operator, or a cast
 				} elsif ($op eq '!' || $op eq '~' ||
-				         ($is_unary && ($op eq '*' || $op eq '-' || $op eq '&'))) {
+					 $opv eq '*U' || $opv eq '-U' ||
+					 $opv eq '&U' || $opv eq '&&U') {
 					if ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) {
 						ERROR("space required before that '$op' $at\n" . $hereptr);
 					}
-					if ($op  eq '*' && $cc =~/\s*const\b/) {
+					if ($op eq '*' && $cc =~/\s*const\b/) {
 						# A unary '*' may be const
 
 					} elsif ($ctx =~ /.xW/) {
@@ -1595,11 +1854,33 @@ sub process {
 							$hereptr);
 					}
 
+				# A colon needs no spaces before when it is
+				# terminating a case value or a label.
+				} elsif ($opv eq ':C' || $opv eq ':L') {
+					if ($ctx =~ /Wx./) {
+						ERROR("space prohibited before that '$op' $at\n" . $hereptr);
+					}
+
 				# All the others need spaces both sides.
 				} elsif ($ctx !~ /[EWC]x[CWE]/) {
+					my $ok = 0;
+
 					# Ignore email addresses <foo@bar>
-					if (!($op eq '<' && $cb =~ /$;\S+\@\S+>/) &&
-					    !($op eq '>' && $cb =~ /<\S+\@\S+$;/)) {
+					if (($op eq '<' &&
+					     $cc =~ /^\S+\@\S+>/) ||
+					    ($op eq '>' &&
+					     $ca =~ /<\S+\@\S+$/))
+					{
+					    	$ok = 1;
+					}
+
+					# Ignore ?:
+					if (($opv eq ':O' && $ca =~ /\?$/) ||
+					    ($op eq '?' && $cc =~ /^:/)) {
+					    	$ok = 1;
+					}
+
+					if ($ok == 0) {
 						ERROR("spaces required around that '$op' $at\n" . $hereptr);
 					}
 				}
@@ -1670,6 +1951,7 @@ sub process {
 			my $value = $2;
 
 			# Flatten any parentheses and braces
+			$value =~ s/\)\(/\) \(/g;
 			while ($value =~ s/\([^\(\)]*\)/1/) {
 			}
 
@@ -1686,8 +1968,28 @@ sub process {
 			ERROR("space required before the open parenthesis '('\n" . $herecurr);
 		}
 
-# Check for illegal assignment in if conditional.
-		if ($line =~ /\bif\s*\(/) {
+# Check for illegal assignment in if conditional -- and check for trailing
+# statements after the conditional.
+		if ($line =~ /do\s*(?!{)/) {
+			my ($stat_next) = ctx_statement_block($line_nr_next,
+						$remain_next, $off_next);
+			$stat_next =~ s/\n./\n /g;
+			##print "stat<$stat> stat_next<$stat_next>\n";
+
+			if ($stat_next =~ /^\s*while\b/) {
+				# If the statement carries leading newlines,
+				# then count those as offsets.
+				my ($whitespace) =
+					($stat_next =~ /^((?:\s*\n[+-])*\s*)/s);
+				my $offset =
+					statement_rawlines($whitespace) - 1;
+
+				$suppress_whiletrailers{$line_nr_next +
+								$offset} = 1;
+			}
+		}
+		if (!defined $suppress_whiletrailers{$linenr} &&
+		    $line =~ /\b(?:if|while|for)\s*\(/ && $line !~ /^.\s*#/) {
 			my ($s, $c) = ($stat, $cond);
 
 			if ($c =~ /\bif\s*\(.*[^<>!=]=[^=].*/) {
@@ -1699,10 +2001,19 @@ sub process {
 			substr($s, 0, length($c), '');
 			$s =~ s/\n.*//g;
 			$s =~ s/$;//g; 	# Remove any comments
-			if (length($c) && $s !~ /^\s*({|;|)\s*\\*\s*$/ &&
-			    $c !~ /^.\s*\#\s*if/)
+			if (length($c) && $s !~ /^\s*{?\s*\\*\s*$/ &&
+			    $c !~ /}\s*while\s*/)
 			{
-				ERROR("trailing statements should be on next line\n" . $herecurr);
+				# Find out how long the conditional actually is.
+				my @newlines = ($c =~ /\n/gs);
+				my $cond_lines = 1 + $#newlines;
+
+				my $stat_real = raw_line($linenr, $cond_lines);
+				if (defined($stat_real) && $cond_lines > 1) {
+					$stat_real = "[...]\n$stat_real";
+				}
+
+				ERROR("trailing statements should be on next line\n" . $herecurr . $stat_real);
 			}
 		}
 
@@ -1729,6 +2040,15 @@ sub process {
 				ERROR("trailing statements should be on next line\n" . $herecurr);
 			}
 		}
+# case and default should not have general statements after them
+		if ($line =~ /^.\s*(?:case\s*.*|default\s*):/g &&
+		    $line !~ /\G(?:
+			(?:\s*$;*)(?:\s*{)?(?:\s*$;*)(?:\s*\\)?\s*$|
+			\s*return\s+
+		    )/xg)
+		{
+			ERROR("trailing statements should be on next line\n" . $herecurr);
+		}
 
 		# Check for }<nl>else {, these must be at the same
 		# indent level to be relevant to each other.
@@ -1765,19 +2085,25 @@ sub process {
 
 #warn if <asm/foo.h> is #included and <linux/foo.h> is available (uses RAW line)
 		if ($tree && $rawline =~ m{^.\s*\#\s*include\s*\<asm\/(.*)\.h\>}) {
-			my $checkfile = "include/linux/$1.h";
-			if (-f "$root/$checkfile" && $realfile ne $checkfile &&
+			my $file = "$1.h";
+			my $checkfile = "include/linux/$file";
+			if (-f "$root/$checkfile" &&
+			    $realfile ne $checkfile &&
 			    $1 ne 'irq')
 			{
-				WARN("Use #include <linux/$1.h> instead of <asm/$1.h>\n" .
-					$herecurr);
+				if ($realfile =~ m{^arch/}) {
+					CHK("Consider using #include <linux/$file> instead of <asm/$file>\n" . $herecurr);
+				} else {
+					WARN("Use #include <linux/$file> instead of <asm/$file>\n" . $herecurr);
+				}
 			}
 		}
 
 # multi-statement macros should be enclosed in a do while loop, grab the
 # first statement and ensure its the whole macro if its not enclosed
 # in a known good container
-		if ($line =~ /^.\s*\#\s*define\s*$Ident(\()?/) {
+		if ($realfile !~ m@/vmlinux.lds.h$@ &&
+		    $line =~ /^.\s*\#\s*define\s*$Ident(\()?/) {
 			my $ln = $linenr;
 			my $cnt = $realcnt;
 			my ($off, $dstat, $dcond, $rest);
@@ -1791,30 +2117,26 @@ sub process {
 				$lines[$ln - 1] =~ /^(?:-|..*\\$)/)
 			{
 				$ctx .= $rawlines[$ln - 1] . "\n";
+				$cnt-- if ($lines[$ln - 1] !~ /^-/);
 				$ln++;
-				$cnt--;
 			}
 			$ctx .= $rawlines[$ln - 1];
 
 			($dstat, $dcond, $ln, $cnt, $off) =
 				ctx_statement_block($linenr, $ln - $linenr + 1, 0);
 			#print "dstat<$dstat> dcond<$dcond> cnt<$cnt> off<$off>\n";
-			#print "LINE<$lines[$ln]> len<" . length($lines[$ln]) . "\n";
+			#print "LINE<$lines[$ln-1]> len<" . length($lines[$ln-1]) . "\n";
 
 			# Extract the remainder of the define (if any) and
 			# rip off surrounding spaces, and trailing \'s.
 			$rest = '';
-			if (defined $lines[$ln - 1] &&
-			    $off > length($lines[$ln - 1]))
-			{
-				$ln++;
-				$cnt--;
-				$off = 0;
-			}
-			while ($cnt > 0) {
-				$rest .= substr($lines[$ln - 1], $off) . "\n";
+			while ($off != 0 || ($cnt > 0 && $rest =~ /\\\s*$/)) {
+				#print "ADDING cnt<$cnt> $off <" . substr($lines[$ln - 1], $off) . "> rest<$rest>\n";
+				if ($off != 0 || $lines[$ln - 1] !~ /^-/) {
+					$rest .= substr($lines[$ln - 1], $off) . "\n";
+					$cnt--;
+				}
 				$ln++;
-				$cnt--;
 				$off = 0;
 			}
 			$rest =~ s/\\\n.//g;
@@ -1827,14 +2149,16 @@ sub process {
 			} else {
 				$dstat =~ s/^.\s*\#\s*define\s+$Ident\s*//;
 			}
+			$dstat =~ s/$;//g;
 			$dstat =~ s/\\\n.//g;
 			$dstat =~ s/^\s*//s;
 			$dstat =~ s/\s*$//s;
 
 			# Flatten any parentheses and braces
-			while ($dstat =~ s/\([^\(\)]*\)/1/) {
-			}
-			while ($dstat =~ s/\{[^\{\}]*\}/1/) {
+			while ($dstat =~ s/\([^\(\)]*\)/1/ ||
+			       $dstat =~ s/\{[^\{\}]*\}/1/ ||
+			       $dstat =~ s/\[[^\{\}]*\]/1/)
+			{
 			}
 
 			my $exceptions = qr{
@@ -1845,6 +2169,7 @@ sub process {
 				DEFINE_PER_CPU|
 				__typeof__\(
 			}x;
+			#print "REST<$rest>\n";
 			if ($rest ne '') {
 				if ($rest !~ /while\s*\(/ &&
 				    $dstat !~ /$exceptions/)
@@ -1856,6 +2181,7 @@ sub process {
 				if ($dstat ne '' &&
 				    $dstat !~ /^(?:$Ident|-?$Constant)$/ &&
 				    $dstat !~ /$exceptions/ &&
+				    $dstat !~ /^\.$Ident\s*=/ &&
 				    $dstat =~ /$Operators/)
 				{
 					ERROR("Macros with complex values should be enclosed in parenthesis\n" . "$here\n$ctx\n");
@@ -1956,10 +2282,10 @@ sub process {
 			}
 			if ($level == 0 && $block =~ /^\s*\{/ && !$allowed) {
 				my $herectx = $here . "\n";;
-				my $end = $linenr + statement_rawlines($block) - 1;
+				my $cnt = statement_rawlines($block);
 
-				for (my $ln = $linenr - 1; $ln < $end; $ln++) {
-					$herectx .= $rawlines[$ln] . "\n";;
+				for (my $n = 0; $n < $cnt; $n++) {
+					$herectx .= raw_line($linenr, $n) . "\n";;
 				}
 
 				WARN("braces {} are not necessary for single statement blocks\n" . $herectx);
@@ -2001,7 +2327,14 @@ sub process {
 		if ($prevline =~ /\bif\s*\(([^\)]*)\)/) {
 			my $expr = $1;
 			if ($line =~ /\bkfree\(\Q$expr\E\);/) {
-				WARN("kfree(NULL) is safe this check is probabally not required\n" . $hereprev);
+				WARN("kfree(NULL) is safe this check is probably not required\n" . $hereprev);
+			}
+		}
+# check for needless usb_free_urb() checks
+		if ($prevline =~ /\bif\s*\(([^\)]*)\)/) {
+			my $expr = $1;
+			if ($line =~ /\busb_free_urb\(\Q$expr\E\);/) {
+				WARN("usb_free_urb(NULL) is safe this check is probably not required\n" . $hereprev);
 			}
 		}
 
@@ -2106,6 +2439,10 @@ sub process {
 		if ($line =~ /\bsimple_(strto.*?)\s*\(/) {
 			WARN("consider using strict_$1 in preference to simple_$1\n" . $herecurr);
 		}
+# check for __initcall(), use device_initcall() explicitly please
+		if ($line =~ /^.\s*__initcall\s*\(/) {
+			WARN("please use device_initcall() instead of __initcall()\n" . $herecurr);
+		}
 
 # use of NR_CPUS is usually wrong
 # ignore definitions of NR_CPUS and usage to define arrays as likely right
@@ -2123,6 +2460,7 @@ sub process {
 		my $string;
 		while ($line =~ /(?:^|")([X\t]*)(?:"|$)/g) {
 			$string = substr($rawline, $-[1], $+[1] - $-[1]);
+			$string =~ s/%%/__/g;
 			if ($string =~ /(?<!%)%L[udi]/) {
 				WARN("\%Ld/%Lu are not-standard C, use %lld/%llu\n" . $herecurr);
 				last;
diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
index 340ad6920511..14ee68e991dd 100755
--- a/scripts/checkstack.pl
+++ b/scripts/checkstack.pl
@@ -14,6 +14,7 @@
 #	M68k port by Geert Uytterhoeven and Andreas Schwab
 #	AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
 #	PARISC port by Kyle McMartin <kyle@parisc-linux.org>
+#	sparc port by Martin Habets <errandir_news@mph.eclipse.co.uk>
 #
 #	Usage:
 #	objdump -d vmlinux | scripts/checkstack.pl [arch]
@@ -26,12 +27,17 @@
 # $& (whole re) matches the complete objdump line with the stack growth
 # $1 (first bracket) matches the size of the stack growth
 #
+# $dre is similar, but for dynamic stack redutions:
+# $& (whole re) matches the complete objdump line with the stack growth
+# $1 (first bracket) matches the dynamic amount of the stack growth
+#
 # use anything else and feel the pain ;)
-my (@stack, $re, $x, $xs);
+my (@stack, $re, $dre, $x, $xs);
 {
 	my $arch = shift;
 	if ($arch eq "") {
 		$arch = `uname -m`;
+		chomp($arch);
 	}
 
 	$x	= "[0-9a-f]";	# hex character
@@ -46,9 +52,11 @@ my (@stack, $re, $x, $xs);
 	} elsif ($arch =~ /^i[3456]86$/) {
 		#c0105234:       81 ec ac 05 00 00       sub    $0x5ac,%esp
 		$re = qr/^.*[as][du][db]    \$(0x$x{1,8}),\%esp$/o;
+		$dre = qr/^.*[as][du][db]    (%.*),\%esp$/o;
 	} elsif ($arch eq 'x86_64') {
 		#    2f60:	48 81 ec e8 05 00 00 	sub    $0x5e8,%rsp
 		$re = qr/^.*[as][du][db]    \$(0x$x{1,8}),\%rsp$/o;
+		$dre = qr/^.*[as][du][db]    (\%.*),\%rsp$/o;
 	} elsif ($arch eq 'ia64') {
 		#e0000000044011fc:       01 0f fc 8c     adds r12=-384,r12
 		$re = qr/.*adds.*r12=-(([0-9]{2}|[3-9])[0-9]{2}),r12/o;
@@ -74,7 +82,10 @@ my (@stack, $re, $x, $xs);
 		$re = qr/.*st[dw]u.*r1,-($x{1,8})\(r1\)/o;
 	} elsif ($arch =~ /^s390x?$/) {
 		#   11160:       a7 fb ff 60             aghi   %r15,-160
-		$re = qr/.*ag?hi.*\%r15,-(([0-9]{2}|[3-9])[0-9]{2})/o;
+		# or
+		#  100092:	 e3 f0 ff c8 ff 71	 lay	 %r15,-56(%r15)
+		$re = qr/.*(?:lay|ag?hi).*\%r15,-(([0-9]{2}|[3-9])[0-9]{2})
+		      (?:\(\%r15\))?$/ox;
 	} elsif ($arch =~ /^sh64$/) {
 		#XXX: we only check for the immediate case presently,
 		#     though we will want to check for the movi/sub
@@ -84,8 +95,11 @@ my (@stack, $re, $x, $xs);
 	} elsif ($arch =~ /^blackfin$/) {
 		#   0:   00 e8 38 01     LINK 0x4e0;
 		$re = qr/.*[[:space:]]LINK[[:space:]]*(0x$x{1,8})/o;
+	} elsif ($arch eq 'sparc' || $arch eq 'sparc64') {
+		# f0019d10:       9d e3 bf 90     save  %sp, -112, %sp
+		$re = qr/.*save.*%sp, -(([0-9]{2}|[3-9])[0-9]{2}), %sp/o;
 	} else {
-		print("wrong or unknown architecture\n");
+		print("wrong or unknown architecture \"$arch\"\n");
 		exit
 	}
 }
@@ -141,6 +155,22 @@ while (my $line = <STDIN>) {
 		next if ($size < 100);
 		push @stack, "$intro$size\n";
 	}
+	elsif (defined $dre && $line =~ m/$dre/) {
+		my $size = "Dynamic ($1)";
+
+		next if $line !~ m/^($xs*)/;
+		my $addr = $1;
+		$addr =~ s/ /0/g;
+		$addr = "0x$addr";
+
+		my $intro = "$addr $func [$file]:";
+		my $padlen = 56 - length($intro);
+		while ($padlen > 0) {
+			$intro .= '	';
+			$padlen -= 8;
+		}
+		push @stack, "$intro$size\n";
+	}
 }
 
 print sort bysize @stack;
diff --git a/scripts/checksyscalls.sh b/scripts/checksyscalls.sh
index 366f8c7f62bf..41564b142c04 100755
--- a/scripts/checksyscalls.sh
+++ b/scripts/checksyscalls.sh
@@ -119,5 +119,5 @@ sed -n -e '/^\#define/ { s/[^_]*__NR_\([^[:space:]]*\).*/\
 \#endif/p }' $1
 }
 
-(ignore_list && syscall_list ${srctree}/include/asm-x86/unistd_32.h) | \
+(ignore_list && syscall_list ${srctree}/arch/x86/include/asm/unistd_32.h) | \
 $* -E -x c - > /dev/null
diff --git a/scripts/diffconfig b/scripts/diffconfig
new file mode 100755
index 000000000000..b91f3e34d44d
--- /dev/null
+++ b/scripts/diffconfig
@@ -0,0 +1,129 @@
+#!/usr/bin/python
+#
+# diffconfig - a tool to compare .config files.
+#
+# originally written in 2006 by Matt Mackall
+#  (at least, this was in his bloatwatch source code)
+# last worked on 2008 by Tim Bird
+#
+
+import sys, os
+
+def usage():
+    print """Usage: diffconfig [-h] [-m] [<config1> <config2>]
+
+Diffconfig is a simple utility for comparing two .config files.
+Using standard diff to compare .config files often includes extraneous and
+distracting information.  This utility produces sorted output with only the
+changes in configuration values between the two files.
+
+Added and removed items are shown with a leading plus or minus, respectively.
+Changed items show the old and new values on a single line.
+
+If -m is specified, then output will be in "merge" style, which has the
+changed and new values in kernel config option format.
+
+If no config files are specified, .config and .config.old are used.
+
+Example usage:
+ $ diffconfig .config config-with-some-changes
+-EXT2_FS_XATTR  n
+-EXT2_FS_XIP  n
+ CRAMFS  n -> y
+ EXT2_FS  y -> n
+ LOG_BUF_SHIFT  14 -> 16
+ PRINTK_TIME  n -> y
+"""
+    sys.exit(0)
+
+# returns a dictionary of name/value pairs for config items in the file
+def readconfig(config_file):
+    d = {}
+    for line in config_file:
+        line = line[:-1]
+        if line[:7] == "CONFIG_":
+            name, val = line[7:].split("=", 1)
+            d[name] = val
+        if line[-11:] == " is not set":
+            d[line[9:-11]] = "n"
+    return d
+
+def print_config(op, config, value, new_value):
+    global merge_style
+
+    if merge_style:
+        if new_value:
+            if new_value=="n":
+                print "# CONFIG_%s is not set" % config
+            else:
+                print "CONFIG_%s=%s" % (config, new_value)
+    else:
+        if op=="-":
+            print "-%s %s" % (config, value)
+        elif op=="+":
+            print "+%s %s" % (config, new_value)
+        else:
+            print " %s %s -> %s" % (config, value, new_value)
+
+def main():
+    global merge_style
+
+    # parse command line args
+    if ("-h" in sys.argv or "--help" in sys.argv):
+	usage()
+
+    merge_style = 0
+    if "-m" in sys.argv:
+        merge_style = 1
+        sys.argv.remove("-m")
+
+    argc = len(sys.argv)
+    if not (argc==1 or argc == 3):
+        print "Error: incorrect number of arguments or unrecognized option"
+        usage()
+
+    if argc == 1:
+        # if no filenames given, assume .config and .config.old
+        build_dir=""
+        if os.environ.has_key("KBUILD_OUTPUT"):
+            build_dir = os.environ["KBUILD_OUTPUT"]+"/"
+
+        configa_filename = build_dir + ".config.old"
+        configb_filename = build_dir + ".config"
+    else:
+        configa_filename = sys.argv[1]
+        configb_filename = sys.argv[2]
+
+    a = readconfig(file(configa_filename))
+    b = readconfig(file(configb_filename))
+
+    # print items in a but not b (accumulate, sort and print)
+    old = []
+    for config in a:
+        if config not in b:
+            old.append(config)
+    old.sort()
+    for config in old:
+        print_config("-", config, a[config], None)
+        del a[config]
+
+    # print items that changed (accumulate, sort, and print)
+    changed = []
+    for config in a:
+        if a[config] != b[config]:
+            changed.append(config)
+        else:
+            del b[config]
+    changed.sort()
+    for config in changed:
+        print_config("->", config, a[config], b[config])
+        del b[config]
+
+    # now print items in b but not in a
+    # (items from b that were in a were removed above)
+    new = b.keys()
+    new.sort()
+    for config in new:
+        print_config("+", config, None, b[config])
+
+main()
diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c
index dca5e0dd09bf..c249274e005a 100644
--- a/scripts/genksyms/genksyms.c
+++ b/scripts/genksyms/genksyms.c
@@ -520,8 +520,7 @@ int main(int argc, char **argv)
 			genksyms_usage();
 			return 1;
 		}
-	if ((strcmp(arch, "v850") == 0) || (strcmp(arch, "h8300") == 0)
-	    || (strcmp(arch, "blackfin") == 0))
+	if ((strcmp(arch, "h8300") == 0) || (strcmp(arch, "blackfin") == 0))
 		mod_prefix = "_";
 	{
 		extern int yydebug;
@@ -546,6 +545,8 @@ int main(int argc, char **argv)
 			}
 			fputs(sym->name, dumpfile);
 			putc(' ', dumpfile);
+			if (sym->is_extern)
+				fputs("extern ", dumpfile);
 			print_list(dumpfile, sym->defn);
 			putc('\n', dumpfile);
 
diff --git a/scripts/genksyms/lex.c_shipped b/scripts/genksyms/lex.c_shipped
index 2a176988d468..2ac23bcca5b5 100644
--- a/scripts/genksyms/lex.c_shipped
+++ b/scripts/genksyms/lex.c_shipped
@@ -6,10 +6,19 @@
 
 /* A lexical scanner generated by flex */
 
+/* %not-for-header */
+
+/* %if-c-only */
+/* %if-not-reentrant */
+
+/* %endif */
+/* %endif */
+/* %ok-for-header */
+
 #define FLEX_SCANNER
 #define YY_FLEX_MAJOR_VERSION 2
 #define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 33
+#define YY_FLEX_SUBMINOR_VERSION 35
 #if YY_FLEX_SUBMINOR_VERSION > 0
 #define FLEX_BETA
 #endif
@@ -47,7 +56,7 @@
 
 /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
 
-#if __STDC_VERSION__ >= 199901L
+#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
 
 /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
  * if you want the limit (max/min) macros for int types. 
@@ -70,7 +79,6 @@ typedef int flex_int32_t;
 typedef unsigned char flex_uint8_t; 
 typedef unsigned short int flex_uint16_t;
 typedef unsigned int flex_uint32_t;
-#endif /* ! C99 */
 
 /* Limits of integral types. */
 #ifndef INT8_MIN
@@ -101,6 +109,8 @@ typedef unsigned int flex_uint32_t;
 #define UINT32_MAX             (4294967295U)
 #endif
 
+#endif /* ! C99 */
+
 #endif /* ! FLEXINT_H */
 
 /* %endif */
@@ -115,11 +125,12 @@ typedef unsigned int flex_uint32_t;
 
 #else	/* ! __cplusplus */
 
-#if __STDC__
+/* C99 requires __STDC__ to be defined as 1. */
+#if defined (__STDC__)
 
 #define YY_USE_CONST
 
-#endif	/* __STDC__ */
+#endif	/* defined (__STDC__) */
 #endif	/* ! __cplusplus */
 
 #ifdef YY_USE_CONST
@@ -218,14 +229,9 @@ extern FILE *yyin, *yyout;
 
 #define unput(c) yyunput( c, (yytext_ptr)  )
 
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- */
-
 #ifndef YY_TYPEDEF_YY_SIZE_T
 #define YY_TYPEDEF_YY_SIZE_T
-typedef unsigned int yy_size_t;
+typedef size_t yy_size_t;
 #endif
 
 #ifndef YY_STRUCT_YY_BUFFER_STATE
@@ -401,7 +407,7 @@ void yyfree (void *  );
 /* %% [1.0] yytext/yyin/yyout/yy_state_type/yylineno etc. def's & init go here */
 /* Begin user sect3 */
 
-#define yywrap() 1
+#define yywrap(n) 1
 #define YY_SKIP_YYWRAP
 
 #define FLEX_DEBUG
@@ -613,8 +619,8 @@ int yy_flex_debug = 1;
 
 static yyconst flex_int16_t yy_rule_linenum[13] =
     {   0,
-       69,   70,   71,   74,   77,   78,   79,   85,   86,   87,
-       89,   92
+       71,   72,   73,   76,   79,   80,   81,   87,   88,   89,
+       91,   94
     } ;
 
 /* The intent behind this definition is that it'll catch
@@ -665,7 +671,8 @@ char *yytext;
    quite so pedantic.  */
 
 /* We don't do multiple input files.  */
-#line 669 "scripts/genksyms/lex.c"
+#define YY_NO_INPUT 1
+#line 676 "scripts/genksyms/lex.c"
 
 #define INITIAL 0
 #define V2_TOKENS 1
@@ -695,9 +702,39 @@ static int yy_init_globals (void );
 /* %endif */
 /* %if-reentrant */
 /* %endif */
+/* %endif End reentrant structures and macros. */
+
+/* Accessor methods to globals.
+   These are made visible to non-reentrant scanners for convenience. */
+
+int yylex_destroy (void );
+
+int yyget_debug (void );
+
+void yyset_debug (int debug_flag  );
+
+YY_EXTRA_TYPE yyget_extra (void );
+
+void yyset_extra (YY_EXTRA_TYPE user_defined  );
+
+FILE *yyget_in (void );
+
+void yyset_in  (FILE * in_str  );
+
+FILE *yyget_out (void );
+
+void yyset_out  (FILE * out_str  );
+
+int yyget_leng (void );
+
+char *yyget_text (void );
+
+int yyget_lineno (void );
+
+void yyset_lineno (int line_number  );
+
 /* %if-bison-bridge */
 /* %endif */
-/* %endif End reentrant structures and macros. */
 
 /* Macros after this point can all be overridden by user definitions in
  * section 1.
@@ -756,7 +793,7 @@ static int input (void );
 /* This used to be an fputs(), but since the string might contain NUL's,
  * we now use fwrite().
  */
-#define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
+#define ECHO fwrite( yytext, yyleng, 1, yyout )
 /* %endif */
 /* %if-c++-only C++ definition */
 /* %endif */
@@ -881,12 +918,12 @@ YY_DECL
 	register int yy_act;
     
 /* %% [7.0] user's declarations go here */
-#line 65 "scripts/genksyms/lex.l"
+#line 67 "scripts/genksyms/lex.l"
 
 
 
  /* Keep track of our location in the original source files.  */
-#line 890 "scripts/genksyms/lex.c"
+#line 927 "scripts/genksyms/lex.c"
 
 	if ( !(yy_init) )
 		{
@@ -1004,42 +1041,42 @@ do_action:	/* This label is used only to access EOF actions. */
 case 1:
 /* rule 1 can match eol */
 YY_RULE_SETUP
-#line 69 "scripts/genksyms/lex.l"
+#line 71 "scripts/genksyms/lex.l"
 return FILENAME;
 	YY_BREAK
 case 2:
 /* rule 2 can match eol */
 YY_RULE_SETUP
-#line 70 "scripts/genksyms/lex.l"
+#line 72 "scripts/genksyms/lex.l"
 cur_line++;
 	YY_BREAK
 case 3:
 /* rule 3 can match eol */
 YY_RULE_SETUP
-#line 71 "scripts/genksyms/lex.l"
+#line 73 "scripts/genksyms/lex.l"
 cur_line++;
 	YY_BREAK
 /* Ignore all other whitespace.  */
 case 4:
 YY_RULE_SETUP
-#line 74 "scripts/genksyms/lex.l"
+#line 76 "scripts/genksyms/lex.l"
 ;
 	YY_BREAK
 case 5:
 /* rule 5 can match eol */
 YY_RULE_SETUP
-#line 77 "scripts/genksyms/lex.l"
+#line 79 "scripts/genksyms/lex.l"
 return STRING;
 	YY_BREAK
 case 6:
 /* rule 6 can match eol */
 YY_RULE_SETUP
-#line 78 "scripts/genksyms/lex.l"
+#line 80 "scripts/genksyms/lex.l"
 return CHAR;
 	YY_BREAK
 case 7:
 YY_RULE_SETUP
-#line 79 "scripts/genksyms/lex.l"
+#line 81 "scripts/genksyms/lex.l"
 return IDENT;
 	YY_BREAK
 /* The Pedant requires that the other C multi-character tokens be
@@ -1048,36 +1085,36 @@ return IDENT;
     around them properly.  */
 case 8:
 YY_RULE_SETUP
-#line 85 "scripts/genksyms/lex.l"
+#line 87 "scripts/genksyms/lex.l"
 return OTHER;
 	YY_BREAK
 case 9:
 YY_RULE_SETUP
-#line 86 "scripts/genksyms/lex.l"
+#line 88 "scripts/genksyms/lex.l"
 return INT;
 	YY_BREAK
 case 10:
 YY_RULE_SETUP
-#line 87 "scripts/genksyms/lex.l"
+#line 89 "scripts/genksyms/lex.l"
 return REAL;
 	YY_BREAK
 case 11:
 YY_RULE_SETUP
-#line 89 "scripts/genksyms/lex.l"
+#line 91 "scripts/genksyms/lex.l"
 return DOTS;
 	YY_BREAK
 /* All other tokens are single characters.  */
 case 12:
 YY_RULE_SETUP
-#line 92 "scripts/genksyms/lex.l"
+#line 94 "scripts/genksyms/lex.l"
 return yytext[0];
 	YY_BREAK
 case 13:
 YY_RULE_SETUP
-#line 95 "scripts/genksyms/lex.l"
+#line 97 "scripts/genksyms/lex.l"
 ECHO;
 	YY_BREAK
-#line 1081 "scripts/genksyms/lex.c"
+#line 1118 "scripts/genksyms/lex.c"
 case YY_STATE_EOF(INITIAL):
 case YY_STATE_EOF(V2_TOKENS):
 	yyterminate();
@@ -1346,6 +1383,14 @@ static int yy_get_next_buffer (void)
 	else
 		ret_val = EOB_ACT_CONTINUE_SCAN;
 
+	if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+		/* Extend the array by 50%, plus the number we really need. */
+		yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+		YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size  );
+		if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+			YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
+	}
+
 	(yy_n_chars) += number_to_move;
 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
@@ -1851,7 +1896,9 @@ static void yyensure_buffer_stack (void)
 		(yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
 								(num_to_alloc * sizeof(struct yy_buffer_state*)
 								);
-		
+		if ( ! (yy_buffer_stack) )
+			YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
+								  
 		memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
 				
 		(yy_buffer_stack_max) = num_to_alloc;
@@ -1869,6 +1916,8 @@ static void yyensure_buffer_stack (void)
 								((yy_buffer_stack),
 								num_to_alloc * sizeof(struct yy_buffer_state*)
 								);
+		if ( ! (yy_buffer_stack) )
+			YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
 
 		/* zero only the new slots.*/
 		memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
@@ -2092,7 +2141,7 @@ void yyset_debug (int  bdebug )
 /* %if-reentrant */
 /* %if-bison-bridge */
 /* %endif */
-/* %endif */
+/* %endif if-c-only */
 
 /* %if-c-only */
 static int yy_init_globals (void)
@@ -2124,13 +2173,9 @@ static int yy_init_globals (void)
 }
 /* %endif */
 
-/* %if-c-or-c++ */
-/* %if-c-only */
+/* %if-c-only SNIP! this currently causes conflicts with the c++ scanner */
 /* yylex_destroy is for both reentrant and non-reentrant scanners. */
 int yylex_destroy  (void)
-/* %endif */
-/* %if-c++-only */
-/* %endif */
 {
     
     /* Pop the buffer stack, destroying each element. */
@@ -2144,11 +2189,6 @@ int yylex_destroy  (void)
 	yyfree((yy_buffer_stack) );
 	(yy_buffer_stack) = NULL;
 
-/* %if-c++-only */
-/* %endif */
-
-/* %if-c-only */
-
     /* Reset the globals. This is important in a non-reentrant scanner so the next time
      * yylex() is called, initialization will occur. */
     yy_init_globals( );
@@ -2156,7 +2196,6 @@ int yylex_destroy  (void)
 /* %if-reentrant */
 /* %endif */
     return 0;
-/* %endif */
 }
 /* %endif */
 
@@ -2213,7 +2252,7 @@ void yyfree (void * ptr )
 
 /* %ok-for-header */
 
-#line 95 "scripts/genksyms/lex.l"
+#line 97 "scripts/genksyms/lex.l"
 
 
 
diff --git a/scripts/genksyms/lex.l b/scripts/genksyms/lex.l
index 5e544a06678b..fe50ff9dacd0 100644
--- a/scripts/genksyms/lex.l
+++ b/scripts/genksyms/lex.l
@@ -62,6 +62,8 @@ MC_TOKEN		([~%^&*+=|<>/-]=)|(&&)|("||")|(->)|(<<)|(>>)
 /* We don't do multiple input files.  */
 %option noyywrap
 
+%option noinput
+
 %%
 
 
diff --git a/scripts/genksyms/parse.c_shipped b/scripts/genksyms/parse.c_shipped
index 3e6079f36b9f..eaee44e66a43 100644
--- a/scripts/genksyms/parse.c_shipped
+++ b/scripts/genksyms/parse.c_shipped
@@ -504,7 +504,7 @@ static const yytype_uint16 yyprhs[] =
      239,   242,   245,   247,   248,   250,   252,   257,   262,   265,
      269,   273,   277,   278,   280,   283,   287,   291,   292,   294,
      296,   299,   303,   306,   307,   309,   311,   315,   318,   321,
-     323,   326,   327,   329,   332,   333,   335
+     323,   326,   327,   330,   333,   334,   336
 };
 
 /* YYRHS -- A `-1'-separated list of the rules' RHS.  */
@@ -542,9 +542,9 @@ static const yytype_int8 yyrhs[] =
       -1,    -1,    89,    -1,    90,    -1,    89,    90,    -1,    64,
       91,    44,    -1,     1,    44,    -1,    -1,    92,    -1,    93,
       -1,    92,    46,    93,    -1,    76,    95,    -1,    37,    94,
-      -1,    94,    -1,    52,    34,    -1,    -1,    31,    -1,    30,
-      44,    -1,    -1,    30,    -1,    29,    47,    37,    49,    44,
-      -1
+      -1,    94,    -1,    52,    34,    -1,    -1,    95,    31,    -1,
+      30,    44,    -1,    -1,    30,    -1,    29,    47,    37,    49,
+      44,    -1
 };
 
 /* YYRLINE[YYN] -- source line where rule number YYN was defined.  */
@@ -647,7 +647,7 @@ static const yytype_uint8 yyr2[] =
        2,     2,     1,     0,     1,     1,     4,     4,     2,     3,
        3,     3,     0,     1,     2,     3,     3,     0,     1,     1,
        2,     3,     2,     0,     1,     1,     3,     2,     2,     1,
-       2,     0,     1,     2,     0,     1,     5
+       2,     0,     2,     2,     0,     1,     5
 };
 
 /* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
@@ -667,9 +667,9 @@ static const yytype_uint8 yydefact[] =
        0,    66,   125,   101,   121,    71,     0,     7,   112,   106,
       76,    77,     0,     0,     0,   121,    75,     0,   114,   115,
      119,   105,     0,   110,   124,     0,    36,     0,    73,    72,
-      61,    20,   122,   102,     0,    93,     0,    84,    87,    88,
-     118,     0,    76,     0,   120,    74,   117,    80,     0,   111,
-       0,    35,   126,     0,    21,   103,    70,    94,    56,     0,
+      61,    20,   102,     0,    93,     0,    84,    87,    88,   118,
+       0,    76,     0,   120,    74,   117,    80,     0,   111,     0,
+      35,   126,   122,     0,    21,   103,    70,    94,    56,     0,
       93,    90,    92,    69,    83,     0,    82,    81,     0,     0,
      116,   104,     0,    95,     0,    91,    98,     0,    85,    89,
       79,    78,   100,    99,     0,     0,    97,    96
@@ -680,44 +680,44 @@ static const yytype_int16 yydefgoto[] =
 {
       -1,     1,     2,     3,    35,    72,    55,    36,    64,    65,
       66,    75,    38,    39,    40,    41,    42,    67,    86,    87,
-      43,   114,    69,   105,   106,   126,   127,   128,   129,   151,
+      43,   114,    69,   105,   106,   125,   126,   127,   128,   151,
      152,    44,   144,   145,    54,    76,    77,    78,   107,   108,
-     109,   110,   123,    45,    94,    46
+     109,   110,   122,    45,    94,    46
 };
 
 /* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
    STATE-NUM.  */
-#define YYPACT_NINF -135
+#define YYPACT_NINF -134
 static const yytype_int16 yypact[] =
 {
-    -135,    11,  -135,   312,  -135,  -135,    24,  -135,  -135,  -135,
-    -135,  -135,   -23,  -135,    -2,  -135,  -135,  -135,  -135,  -135,
-    -135,  -135,  -135,  -135,   -17,  -135,   -11,  -135,  -135,  -135,
-      -3,    16,    26,  -135,  -135,  -135,  -135,    34,   482,  -135,
-    -135,  -135,  -135,  -135,  -135,  -135,  -135,  -135,  -135,  -135,
-      -8,  -135,    22,    97,  -135,   482,    22,  -135,   482,    56,
-    -135,  -135,    12,    10,    50,    49,  -135,    34,   -13,    15,
-    -135,  -135,   482,  -135,    47,   -25,    51,   145,  -135,  -135,
-      34,  -135,   356,    52,    71,    77,  -135,    10,  -135,  -135,
-      34,  -135,  -135,  -135,    68,  -135,   193,  -135,  -135,  -135,
-      48,  -135,     6,    93,    37,    68,    18,    85,    84,  -135,
-    -135,  -135,    87,  -135,   102,    86,  -135,    89,  -135,  -135,
-    -135,  -135,  -135,    90,    88,   401,    94,   100,   101,  -135,
-    -135,    99,  -135,   108,  -135,  -135,  -135,  -135,   230,  -135,
-     -25,  -135,  -135,   105,  -135,  -135,  -135,  -135,  -135,     9,
-      42,  -135,    28,  -135,  -135,   445,  -135,  -135,   119,   125,
-    -135,  -135,   126,  -135,   128,  -135,  -135,   267,  -135,  -135,
-    -135,  -135,  -135,  -135,   129,   130,  -135,  -135
+    -134,    16,  -134,   312,  -134,  -134,    20,  -134,  -134,  -134,
+    -134,  -134,   -18,  -134,    -3,  -134,  -134,  -134,  -134,  -134,
+    -134,  -134,  -134,  -134,   -26,  -134,   -25,  -134,  -134,  -134,
+      -7,     5,    27,  -134,  -134,  -134,  -134,    46,   482,  -134,
+    -134,  -134,  -134,  -134,  -134,  -134,  -134,  -134,  -134,  -134,
+      -8,  -134,    30,    97,  -134,   482,    30,  -134,   482,     7,
+    -134,  -134,    12,    10,    42,    55,  -134,    46,   -15,    15,
+    -134,  -134,   482,  -134,    25,    26,    47,   145,  -134,  -134,
+      46,  -134,   356,    39,    71,    77,  -134,    10,  -134,  -134,
+      46,  -134,  -134,  -134,  -134,  -134,   193,  -134,  -134,  -134,
+      75,  -134,     6,    95,    43,  -134,    28,    86,    85,  -134,
+    -134,  -134,    88,  -134,   103,    87,  -134,    91,  -134,  -134,
+    -134,  -134,   -23,    90,   401,    94,   101,   102,  -134,  -134,
+      98,  -134,   108,  -134,  -134,   109,  -134,   230,  -134,    26,
+    -134,  -134,  -134,   134,  -134,  -134,  -134,  -134,  -134,     9,
+      48,  -134,    35,  -134,  -134,   445,  -134,  -134,   125,   126,
+    -134,  -134,   128,  -134,   129,  -134,  -134,   267,  -134,  -134,
+    -134,  -134,  -134,  -134,   130,   131,  -134,  -134
 };
 
 /* YYPGOTO[NTERM-NUM].  */
 static const yytype_int16 yypgoto[] =
 {
-    -135,  -135,   179,  -135,  -135,  -135,  -135,   -47,  -135,  -135,
-      91,     0,   -58,   -37,  -135,  -135,  -135,   -73,  -135,  -135,
-     -48,   -32,  -135,   -38,  -135,  -134,  -135,  -135,    29,   -63,
-    -135,  -135,  -135,  -135,   -20,  -135,  -135,   106,  -135,  -135,
-      45,    95,    82,  -135,  -135,  -135
+    -134,  -134,   180,  -134,  -134,  -134,  -134,   -33,  -134,  -134,
+      93,     0,   -58,   -37,  -134,  -134,  -134,   -73,  -134,  -134,
+     -54,   -32,  -134,   -81,  -134,  -133,  -134,  -134,    29,   -50,
+    -134,  -134,  -134,  -134,   -20,  -134,  -134,   110,  -134,  -134,
+      49,    96,    80,  -134,  -134,  -134
 };
 
 /* YYTABLE[YYPACT[STATE-NUM]].  What to do in state STATE-NUM.  If
@@ -727,26 +727,26 @@ static const yytype_int16 yypgoto[] =
 #define YYTABLE_NINF -109
 static const yytype_int16 yytable[] =
 {
-      82,    70,   104,    37,   159,    68,    57,   131,    79,    49,
-     162,     4,   100,    84,    50,    88,   101,    92,    10,    93,
-      52,    51,   102,    63,    71,    97,    56,   103,    20,   104,
-      85,   104,    73,   175,    53,    91,    81,    29,   125,   120,
-      53,    33,   -93,   132,    58,    70,   147,   101,    95,    61,
-     163,   137,   150,   102,    63,    80,   149,    63,   -93,    62,
-      63,   166,    96,    59,   133,   138,   135,   104,    47,    48,
-      60,    61,    80,    53,   132,   167,   150,   150,   101,   147,
-     125,    62,    63,   163,   102,    63,   164,   165,    70,   149,
-      63,    98,    99,    83,    89,    90,   111,   125,    74,   122,
-     103,   117,     7,     8,     9,    10,    11,    12,    13,   125,
+      82,    70,   104,    37,   159,    68,    57,   130,   142,    88,
+     162,    52,    56,    84,    49,    92,     4,    93,    10,    50,
+      51,   132,    79,   134,    71,    53,    53,   143,    20,   104,
+      85,   104,    73,   120,   175,    91,    81,    29,   124,    97,
+      58,    33,   -93,   131,    83,    70,   147,   101,    95,    61,
+     163,   150,    59,   102,    63,    80,   149,    63,   -93,    62,
+      63,   136,    96,   100,    47,    48,   104,   101,   166,    98,
+      99,    60,    80,   102,    63,   137,   150,   150,   103,   124,
+     131,    53,   167,    61,   101,   147,    89,    70,   117,   163,
+     102,    63,   111,    62,    63,   149,    63,   124,    74,   164,
+     165,    90,     7,     8,     9,    10,    11,    12,    13,   124,
       15,    16,    17,    18,    19,    20,    21,    22,    23,    24,
-     118,    26,    27,    28,    29,    30,   119,   134,    33,   139,
-     140,    98,    92,   142,   -22,   141,   154,   146,    34,   161,
-     143,   -22,  -107,   153,   -22,   -22,   112,   155,   156,   -22,
+     118,    26,    27,    28,    29,    30,   119,   103,    33,   133,
+     138,   139,    98,    92,   -22,   141,   140,   154,    34,   146,
+     142,   -22,  -107,   153,   -22,   -22,   112,   156,   155,   -22,
        7,     8,     9,    10,    11,    12,    13,   157,    15,    16,
-      17,    18,    19,    20,    21,    22,    23,    24,   170,    26,
-      27,    28,    29,    30,   171,   172,    33,   173,   176,   177,
-       5,   121,   -22,   113,   169,   160,    34,   136,     0,   -22,
-    -108,     0,   -22,   -22,   124,   130,     0,   -22,     7,     8,
+      17,    18,    19,    20,    21,    22,    23,    24,   161,    26,
+      27,    28,    29,    30,   170,   171,    33,   172,   173,   176,
+     177,     5,   -22,   121,   169,   135,    34,   113,   160,   -22,
+    -108,     0,   -22,   -22,   123,     0,   129,   -22,     7,     8,
        9,    10,    11,    12,    13,     0,    15,    16,    17,    18,
       19,    20,    21,    22,    23,    24,     0,    26,    27,    28,
       29,    30,     0,     0,    33,     0,     0,     0,     0,   -86,
@@ -784,26 +784,26 @@ static const yytype_int16 yytable[] =
 
 static const yytype_int16 yycheck[] =
 {
-      58,    38,    75,     3,   138,    37,    26,     1,    55,    32,
-       1,     0,    37,     1,    37,    63,    41,    30,     8,    32,
-      37,    23,    47,    48,    32,    72,    37,    52,    18,   102,
-      62,   104,    52,   167,    51,    67,    56,    27,    96,    87,
-      51,    31,    33,    37,    47,    82,    37,    41,    33,    37,
-      41,    33,   125,    47,    48,    55,    47,    48,    49,    47,
-      48,    33,    47,    47,   102,    47,   104,   140,    44,    45,
-      44,    37,    72,    51,    37,    47,   149,   150,    41,    37,
-     138,    47,    48,    41,    47,    48,   149,   150,   125,    47,
-      48,    44,    45,    37,    44,    46,    45,   155,     1,    31,
-      52,    49,     5,     6,     7,     8,     9,    10,    11,   167,
+      58,    38,    75,     3,   137,    37,    26,     1,    31,    63,
+       1,    37,    37,     1,    32,    30,     0,    32,     8,    37,
+      23,   102,    55,   104,    32,    51,    51,    50,    18,   102,
+      62,   104,    52,    87,   167,    67,    56,    27,    96,    72,
+      47,    31,    33,    37,    37,    82,    37,    41,    33,    37,
+      41,   124,    47,    47,    48,    55,    47,    48,    49,    47,
+      48,    33,    47,    37,    44,    45,   139,    41,    33,    44,
+      45,    44,    72,    47,    48,    47,   149,   150,    52,   137,
+      37,    51,    47,    37,    41,    37,    44,   124,    49,    41,
+      47,    48,    45,    47,    48,    47,    48,   155,     1,   149,
+     150,    46,     5,     6,     7,     8,     9,    10,    11,   167,
       13,    14,    15,    16,    17,    18,    19,    20,    21,    22,
-      49,    24,    25,    26,    27,    28,    49,    34,    31,    44,
-      46,    44,    30,    44,    37,    49,    36,    49,    41,    34,
-      50,    44,    45,    49,    47,    48,     1,    46,    49,    52,
+      49,    24,    25,    26,    27,    28,    49,    52,    31,    34,
+      44,    46,    44,    30,    37,    44,    49,    36,    41,    49,
+      31,    44,    45,    49,    47,    48,     1,    49,    46,    52,
        5,     6,     7,     8,     9,    10,    11,    49,    13,    14,
-      15,    16,    17,    18,    19,    20,    21,    22,    49,    24,
+      15,    16,    17,    18,    19,    20,    21,    22,    34,    24,
       25,    26,    27,    28,    49,    49,    31,    49,    49,    49,
-       1,    90,    37,    77,   155,   140,    41,   105,    -1,    44,
-      45,    -1,    47,    48,     1,   100,    -1,    52,     5,     6,
+      49,     1,    37,    90,   155,   105,    41,    77,   139,    44,
+      45,    -1,    47,    48,     1,    -1,   100,    52,     5,     6,
        7,     8,     9,    10,    11,    -1,    13,    14,    15,    16,
       17,    18,    19,    20,    21,    22,    -1,    24,    25,    26,
       27,    28,    -1,    -1,    31,    -1,    -1,    -1,    -1,    36,
@@ -855,9 +855,9 @@ static const yytype_uint8 yystos[] =
       46,    74,    30,    32,    97,    33,    47,    60,    44,    45,
       37,    41,    47,    52,    70,    76,    77,    91,    92,    93,
       94,    45,     1,    90,    74,    48,    49,    49,    49,    49,
-      73,    63,    31,    95,     1,    65,    78,    79,    80,    81,
-      94,     1,    37,    76,    34,    76,    95,    33,    47,    44,
-      46,    49,    44,    50,    85,    86,    49,    37,    41,    47,
+      73,    63,    95,     1,    65,    78,    79,    80,    81,    94,
+       1,    37,    76,    34,    76,    95,    33,    47,    44,    46,
+      49,    44,    31,    50,    85,    86,    49,    37,    41,    47,
       70,    82,    83,    49,    36,    46,    49,    49,     1,    78,
       93,    34,     1,    41,    82,    82,    33,    47,    36,    81,
       49,    49,    49,    49,     1,    78,    49,    49
diff --git a/scripts/genksyms/parse.y b/scripts/genksyms/parse.y
index 408cdf82b271..10d7dc724b6d 100644
--- a/scripts/genksyms/parse.y
+++ b/scripts/genksyms/parse.y
@@ -446,7 +446,7 @@ member_bitfield_declarator:
 
 attribute_opt:
 	/* empty */					{ $$ = NULL; }
-	| ATTRIBUTE_PHRASE
+	| attribute_opt ATTRIBUTE_PHRASE
 	;
 
 asm_definition:
diff --git a/scripts/hdrcheck.sh b/scripts/hdrcheck.sh
deleted file mode 100755
index 31598584f871..000000000000
--- a/scripts/hdrcheck.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-for FILE in `grep '^[ \t]*#[ \t]*include[ \t]*<' $2 | cut -f2 -d\< | cut -f1 -d\> | egrep ^linux\|^asm` ; do
-    if [ ! -r $1/$FILE ]; then
-	echo $2 requires $FILE, which does not exist in exported headers
-	exit 1
-    fi
-done
-# FIXME: List dependencies into $3
-touch $3
diff --git a/scripts/headers.sh b/scripts/headers.sh
new file mode 100755
index 000000000000..d33426f866db
--- /dev/null
+++ b/scripts/headers.sh
@@ -0,0 +1,41 @@
+#!/bin/sh
+# Run headers_$1 command for all suitable architectures
+
+# Stop on error
+set -e
+
+do_command()
+{
+	if [ -f ${srctree}/arch/$2/include/asm/Kbuild ]; then
+		make ARCH=$2 KBUILD_HEADERS=$1 headers_$1
+	elif [ -f ${srctree}/include/asm-$2/Kbuild ]; then
+		make ARCH=$2 KBUILD_HEADERS=$1 headers_$1
+	else
+		printf "Ignoring arch: %s\n" ${arch}
+	fi
+}
+
+# Do not try this architecture
+drop="generic um ppc sparc64 cris"
+
+archs=$(ls ${srctree}/arch)
+
+for arch in ${archs}; do
+	case ${arch} in
+	um)        # no userspace export
+		;;
+	ppc)       # headers exported by powerpc
+		;;
+	sparc64)   # headers exported by sparc
+		;;
+	cris)      # headers export are known broken
+		;;
+	*)
+		if [ -d ${srctree}/arch/${arch} ]; then
+			do_command $1 ${arch}
+		fi
+		;;
+	esac
+done
+
+
diff --git a/scripts/headers_check.pl b/scripts/headers_check.pl
new file mode 100644
index 000000000000..15d53a6b1a1f
--- /dev/null
+++ b/scripts/headers_check.pl
@@ -0,0 +1,56 @@
+#!/usr/bin/perl
+#
+# headers_check.pl execute a number of trivial consistency checks
+#
+# Usage: headers_check.pl dir [files...]
+# dir:   dir to look for included files
+# arch:  architecture
+# files: list of files to check
+#
+# The script reads the supplied files line by line and:
+#
+# 1) for each include statement it checks if the
+#    included file actually exists.
+#    Only include files located in asm* and linux* are checked.
+#    The rest are assumed to be system include files.
+#
+# 2) TODO: check for leaked CONFIG_ symbols
+
+use strict;
+use warnings;
+
+my ($dir, $arch, @files) = @ARGV;
+
+my $ret = 0;
+my $line;
+my $lineno = 0;
+my $filename;
+
+foreach my $file (@files) {
+	$filename = $file;
+	open(my $fh, '<', "$filename") or die "$filename: $!\n";
+	$lineno = 0;
+	while ($line = <$fh>) {
+		$lineno++;
+		check_include();
+	}
+	close $fh;
+}
+exit $ret;
+
+sub check_include
+{
+	if ($line =~ m/^\s*#\s*include\s+<((asm|linux).*)>/) {
+		my $inc = $1;
+		my $found;
+		$found = stat($dir . "/" . $inc);
+		if (!$found) {
+			$inc =~ s#asm/#asm-$arch/#;
+			$found = stat($dir . "/" . $inc);
+		}
+		if (!$found) {
+			printf STDERR "$filename:$lineno: included file '$inc' is not exported\n";
+			$ret = 1;
+		}
+	}
+}
diff --git a/scripts/headers_install.pl b/scripts/headers_install.pl
new file mode 100644
index 000000000000..68591cd08731
--- /dev/null
+++ b/scripts/headers_install.pl
@@ -0,0 +1,45 @@
+#!/usr/bin/perl
+#
+# headers_install prepare the listed header files for use in
+# user space and copy the files to their destination.
+#
+# Usage: headers_install.pl readdir installdir arch [files...]
+# readdir:    dir to open files
+# installdir: dir to install the files
+# arch:       current architecture
+#             arch is used to force a reinstallation when the arch
+#             changes because kbuild then detect a command line change.
+# files:      list of files to check
+#
+# Step in preparation for users space:
+# 1) Drop all use of compiler.h definitions
+# 2) Drop include of compiler.h
+# 3) Drop all sections defined out by __KERNEL__ (using unifdef)
+
+use strict;
+use warnings;
+
+my ($readdir, $installdir, $arch, @files) = @ARGV;
+
+my $unifdef = "scripts/unifdef -U__KERNEL__";
+
+foreach my $file (@files) {
+	my $tmpfile = "$installdir/$file.tmp";
+	open(my $infile, '<', "$readdir/$file")
+		or die "$readdir/$file: $!\n";
+	open(my $outfile, '>', "$tmpfile") or die "$tmpfile: $!\n";
+	while (my $line = <$infile>) {
+		$line =~ s/([\s(])__user\s/$1/g;
+		$line =~ s/([\s(])__force\s/$1/g;
+		$line =~ s/([\s(])__iomem\s/$1/g;
+		$line =~ s/\s__attribute_const__\s/ /g;
+		$line =~ s/\s__attribute_const__$//g;
+		$line =~ s/^#include <linux\/compiler.h>//;
+		printf $outfile "%s", $line;
+	}
+	close $outfile;
+	close $infile;
+	system $unifdef . " $tmpfile > $installdir/$file";
+	unlink $tmpfile;
+}
+exit 0;
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index fa1a7d565903..fa8c2dd9c983 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -4,7 +4,11 @@
 
 PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
 
+ifdef KBUILD_KCONFIG
+Kconfig := $(KBUILD_KCONFIG)
+else
 Kconfig := arch/$(SRCARCH)/Kconfig
+endif
 
 xconfig: $(obj)/qconf
 	$< $(Kconfig)
diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index fda63136ae68..3e1057f885c6 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -32,6 +32,7 @@ char *defconfig_file;
 
 static int indent = 1;
 static int valid_stdin = 1;
+static int sync_kconfig;
 static int conf_cnt;
 static char line[128];
 static struct menu *rootEntry;
@@ -65,7 +66,7 @@ static void strip(char *str)
 
 static void check_stdin(void)
 {
-	if (!valid_stdin && input_mode == ask_silent) {
+	if (!valid_stdin) {
 		printf(_("aborted!\n\n"));
 		printf(_("Console input/output is redirected. "));
 		printf(_("Run 'make oldconfig' to update configuration.\n\n"));
@@ -76,7 +77,6 @@ static void check_stdin(void)
 static int conf_askvalue(struct symbol *sym, const char *def)
 {
 	enum symbol_type type = sym_get_type(sym);
-	tristate val;
 
 	if (!sym_has_value(sym))
 		printf(_("(NEW) "));
@@ -92,15 +92,6 @@ static int conf_askvalue(struct symbol *sym, const char *def)
 	}
 
 	switch (input_mode) {
-	case set_no:
-	case set_mod:
-	case set_yes:
-	case set_random:
-		if (sym_has_value(sym)) {
-			printf("%s\n", def);
-			return 0;
-		}
-		break;
 	case ask_new:
 	case ask_silent:
 		if (sym_has_value(sym)) {
@@ -112,9 +103,6 @@ static int conf_askvalue(struct symbol *sym, const char *def)
 		fflush(stdout);
 		fgets(line, 128, stdin);
 		return 1;
-	case set_default:
-		printf("%s\n", def);
-		return 1;
 	default:
 		break;
 	}
@@ -128,52 +116,6 @@ static int conf_askvalue(struct symbol *sym, const char *def)
 	default:
 		;
 	}
-	switch (input_mode) {
-	case set_yes:
-		if (sym_tristate_within_range(sym, yes)) {
-			line[0] = 'y';
-			line[1] = '\n';
-			line[2] = 0;
-			break;
-		}
-	case set_mod:
-		if (type == S_TRISTATE) {
-			if (sym_tristate_within_range(sym, mod)) {
-				line[0] = 'm';
-				line[1] = '\n';
-				line[2] = 0;
-				break;
-			}
-		} else {
-			if (sym_tristate_within_range(sym, yes)) {
-				line[0] = 'y';
-				line[1] = '\n';
-				line[2] = 0;
-				break;
-			}
-		}
-	case set_no:
-		if (sym_tristate_within_range(sym, no)) {
-			line[0] = 'n';
-			line[1] = '\n';
-			line[2] = 0;
-			break;
-		}
-	case set_random:
-		do {
-			val = (tristate)(rand() % 3);
-		} while (!sym_tristate_within_range(sym, val));
-		switch (val) {
-		case no: line[0] = 'n'; break;
-		case mod: line[0] = 'm'; break;
-		case yes: line[0] = 'y'; break;
-		}
-		line[1] = '\n';
-		line[2] = 0;
-		break;
-	default:
-		break;
-	}
 	printf("%s", line);
 	return 1;
 }
@@ -374,15 +316,7 @@ static int conf_choice(struct menu *menu)
 			else
 				continue;
 			break;
-		case set_random:
-			if (is_new)
-				def = (rand() % cnt) + 1;
-		case set_default:
-		case set_yes:
-		case set_mod:
-		case set_no:
-			cnt = def;
-			printf("%d\n", cnt);
+		default:
 			break;
 		}
 
@@ -507,11 +441,11 @@ int main(int ac, char **av)
 	while ((opt = getopt(ac, av, "osdD:nmyrh")) != -1) {
 		switch (opt) {
 		case 'o':
-			input_mode = ask_new;
+			input_mode = ask_silent;
 			break;
 		case 's':
 			input_mode = ask_silent;
-			valid_stdin = isatty(0) && isatty(1) && isatty(2);
+			sync_kconfig = 1;
 			break;
 		case 'd':
 			input_mode = set_default;
@@ -549,6 +483,19 @@ int main(int ac, char **av)
 	name = av[optind];
 	conf_parse(name);
 	//zconfdump(stdout);
+	if (sync_kconfig) {
+		if (stat(".config", &tmpstat)) {
+			fprintf(stderr, _("***\n"
+				"*** You have not yet configured your kernel!\n"
+				"*** (missing kernel .config file)\n"
+				"***\n"
+				"*** Please run some configurator (e.g. \"make oldconfig\" or\n"
+				"*** \"make menuconfig\" or \"make xconfig\").\n"
+				"***\n"));
+			exit(1);
+		}
+	}
+
 	switch (input_mode) {
 	case set_default:
 		if (!defconfig_file)
@@ -561,16 +508,6 @@ int main(int ac, char **av)
 		}
 		break;
 	case ask_silent:
-		if (stat(".config", &tmpstat)) {
-			printf(_("***\n"
-				"*** You have not yet configured your kernel!\n"
-				"*** (missing kernel .config file)\n"
-				"***\n"
-				"*** Please run some configurator (e.g. \"make oldconfig\" or\n"
-				"*** \"make menuconfig\" or \"make xconfig\").\n"
-				"***\n"));
-			exit(1);
-		}
 	case ask_all:
 	case ask_new:
 		conf_read(NULL);
@@ -600,35 +537,66 @@ int main(int ac, char **av)
 		break;
 	}
 
-	if (input_mode != ask_silent) {
+	if (sync_kconfig) {
+		if (conf_get_changed()) {
+			name = getenv("KCONFIG_NOSILENTUPDATE");
+			if (name && *name) {
+				fprintf(stderr,
+					_("\n*** Kernel configuration requires explicit update.\n\n"));
+				return 1;
+			}
+		}
+		valid_stdin = isatty(0) && isatty(1) && isatty(2);
+	}
+
+	switch (input_mode) {
+	case set_no:
+		conf_set_all_new_symbols(def_no);
+		break;
+	case set_yes:
+		conf_set_all_new_symbols(def_yes);
+		break;
+	case set_mod:
+		conf_set_all_new_symbols(def_mod);
+		break;
+	case set_random:
+		conf_set_all_new_symbols(def_random);
+		break;
+	case set_default:
+		conf_set_all_new_symbols(def_default);
+		break;
+	case ask_new:
+	case ask_all:
 		rootEntry = &rootmenu;
 		conf(&rootmenu);
-		if (input_mode == ask_all) {
-			input_mode = ask_silent;
-			valid_stdin = 1;
+		input_mode = ask_silent;
+		/* fall through */
+	case ask_silent:
+		/* Update until a loop caused no more changes */
+		do {
+			conf_cnt = 0;
+			check_conf(&rootmenu);
+		} while (conf_cnt);
+		break;
+	}
+
+	if (sync_kconfig) {
+		/* silentoldconfig is used during the build so we shall update autoconf.
+		 * All other commands are only used to generate a config.
+		 */
+		if (conf_get_changed() && conf_write(NULL)) {
+			fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
+			exit(1);
 		}
-	} else if (conf_get_changed()) {
-		name = getenv("KCONFIG_NOSILENTUPDATE");
-		if (name && *name) {
-			fprintf(stderr, _("\n*** Kernel configuration requires explicit update.\n\n"));
+		if (conf_write_autoconf()) {
+			fprintf(stderr, _("\n*** Error during update of the kernel configuration.\n\n"));
 			return 1;
 		}
-	} else
-		goto skip_check;
-
-	do {
-		conf_cnt = 0;
-		check_conf(&rootmenu);
-	} while (conf_cnt);
-	if (conf_write(NULL)) {
-		fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
-		return 1;
-	}
-skip_check:
-	if (input_mode == ask_silent && conf_write_autoconf()) {
-		fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
-		return 1;
+	} else {
+		if (conf_write(NULL)) {
+			fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
+			exit(1);
+		}
 	}
-
 	return 0;
 }
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index ee5fe943d58d..830d9eae11f9 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -223,7 +223,7 @@ load:
 			if (def == S_DEF_USER) {
 				sym = sym_find(line + 9);
 				if (!sym) {
-					conf_warning("trying to assign nonexistent symbol %s", line + 9);
+					sym_add_change_count(1);
 					break;
 				}
 			} else {
@@ -262,7 +262,7 @@ load:
 			if (def == S_DEF_USER) {
 				sym = sym_find(line + 7);
 				if (!sym) {
-					conf_warning("trying to assign nonexistent symbol %s", line + 7);
+					sym_add_change_count(1);
 					break;
 				}
 			} else {
@@ -812,3 +812,72 @@ void conf_set_changed_callback(void (*fn)(void))
 {
 	conf_changed_callback = fn;
 }
+
+
+void conf_set_all_new_symbols(enum conf_def_mode mode)
+{
+	struct symbol *sym, *csym;
+	struct property *prop;
+	struct expr *e;
+	int i, cnt, def;
+
+	for_all_symbols(i, sym) {
+		if (sym_has_value(sym))
+			continue;
+		switch (sym_get_type(sym)) {
+		case S_BOOLEAN:
+		case S_TRISTATE:
+			switch (mode) {
+			case def_yes:
+				sym->def[S_DEF_USER].tri = yes;
+				break;
+			case def_mod:
+				sym->def[S_DEF_USER].tri = mod;
+				break;
+			case def_no:
+				sym->def[S_DEF_USER].tri = no;
+				break;
+			case def_random:
+				sym->def[S_DEF_USER].tri = (tristate)(rand() % 3);
+				break;
+			default:
+				continue;
+			}
+			if (!sym_is_choice(sym) || mode != def_random)
+				sym->flags |= SYMBOL_DEF_USER;
+			break;
+		default:
+			break;
+		}
+
+	}
+
+	sym_clear_all_valid();
+
+	if (mode != def_random)
+		return;
+
+	for_all_symbols(i, csym) {
+		if (sym_has_value(csym) || !sym_is_choice(csym))
+			continue;
+
+		sym_calc_value(csym);
+		prop = sym_get_choice_prop(csym);
+		def = -1;
+		while (1) {
+			cnt = 0;
+			expr_list_for_each_sym(prop->expr, e, sym) {
+				if (sym->visible == no)
+					continue;
+				if (def == cnt++) {
+					csym->def[S_DEF_USER].val = sym;
+					break;
+				}
+			}
+			if (def >= 0 || cnt < 2)
+				break;
+			def = (rand() % cnt) + 1;
+		}
+		csym->flags |= SYMBOL_DEF_USER;
+	}
+}
diff --git a/scripts/kconfig/lex.zconf.c_shipped b/scripts/kconfig/lex.zconf.c_shipped
index 6a61cee4a32c..7342ce0a7780 100644
--- a/scripts/kconfig/lex.zconf.c_shipped
+++ b/scripts/kconfig/lex.zconf.c_shipped
@@ -5,10 +5,29 @@
 
 /* A lexical scanner generated by flex */
 
+#define yy_create_buffer zconf_create_buffer
+#define yy_delete_buffer zconf_delete_buffer
+#define yy_flex_debug zconf_flex_debug
+#define yy_init_buffer zconf_init_buffer
+#define yy_flush_buffer zconf_flush_buffer
+#define yy_load_buffer_state zconf_load_buffer_state
+#define yy_switch_to_buffer zconf_switch_to_buffer
+#define yyin zconfin
+#define yyleng zconfleng
+#define yylex zconflex
+#define yylineno zconflineno
+#define yyout zconfout
+#define yyrestart zconfrestart
+#define yytext zconftext
+#define yywrap zconfwrap
+#define yyalloc zconfalloc
+#define yyrealloc zconfrealloc
+#define yyfree zconffree
+
 #define FLEX_SCANNER
 #define YY_FLEX_MAJOR_VERSION 2
 #define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 33
+#define YY_FLEX_SUBMINOR_VERSION 35
 #if YY_FLEX_SUBMINOR_VERSION > 0
 #define FLEX_BETA
 #endif
@@ -30,7 +49,7 @@
 
 /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
 
-#if __STDC_VERSION__ >= 199901L
+#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
 
 /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
  * if you want the limit (max/min) macros for int types. 
@@ -53,7 +72,6 @@ typedef int flex_int32_t;
 typedef unsigned char flex_uint8_t; 
 typedef unsigned short int flex_uint16_t;
 typedef unsigned int flex_uint32_t;
-#endif /* ! C99 */
 
 /* Limits of integral types. */
 #ifndef INT8_MIN
@@ -84,6 +102,8 @@ typedef unsigned int flex_uint32_t;
 #define UINT32_MAX             (4294967295U)
 #endif
 
+#endif /* ! C99 */
+
 #endif /* ! FLEXINT_H */
 
 #ifdef __cplusplus
@@ -93,11 +113,12 @@ typedef unsigned int flex_uint32_t;
 
 #else	/* ! __cplusplus */
 
-#if __STDC__
+/* C99 requires __STDC__ to be defined as 1. */
+#if defined (__STDC__)
 
 #define YY_USE_CONST
 
-#endif	/* __STDC__ */
+#endif	/* defined (__STDC__) */
 #endif	/* ! __cplusplus */
 
 #ifdef YY_USE_CONST
@@ -177,14 +198,9 @@ extern FILE *zconfin, *zconfout;
 
 #define unput(c) yyunput( c, (yytext_ptr)  )
 
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- */
-
 #ifndef YY_TYPEDEF_YY_SIZE_T
 #define YY_TYPEDEF_YY_SIZE_T
-typedef unsigned int yy_size_t;
+typedef size_t yy_size_t;
 #endif
 
 #ifndef YY_STRUCT_YY_BUFFER_STATE
@@ -335,7 +351,7 @@ void zconffree (void *  );
 
 /* Begin user sect3 */
 
-#define zconfwrap() 1
+#define zconfwrap(n) 1
 #define YY_SKIP_YYWRAP
 
 typedef unsigned char YY_CHAR;
@@ -748,6 +764,7 @@ int zconf_flex_debug = 0;
 #define YY_MORE_ADJ 0
 #define YY_RESTORE_YY_MORE_OFFSET
 char *zconftext;
+#define YY_NO_INPUT 1
 
 /*
  * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
@@ -834,6 +851,35 @@ void alloc_string(const char *str, int size)
 
 static int yy_init_globals (void );
 
+/* Accessor methods to globals.
+   These are made visible to non-reentrant scanners for convenience. */
+
+int zconflex_destroy (void );
+
+int zconfget_debug (void );
+
+void zconfset_debug (int debug_flag  );
+
+YY_EXTRA_TYPE zconfget_extra (void );
+
+void zconfset_extra (YY_EXTRA_TYPE user_defined  );
+
+FILE *zconfget_in (void );
+
+void zconfset_in  (FILE * in_str  );
+
+FILE *zconfget_out (void );
+
+void zconfset_out  (FILE * out_str  );
+
+int zconfget_leng (void );
+
+char *zconfget_text (void );
+
+int zconfget_lineno (void );
+
+void zconfset_lineno (int line_number  );
+
 /* Macros after this point can all be overridden by user definitions in
  * section 1.
  */
@@ -876,7 +922,7 @@ static int input (void );
 /* This used to be an fputs(), but since the string might contain NUL's,
  * we now use fwrite().
  */
-#define ECHO (void) fwrite( zconftext, zconfleng, 1, zconfout )
+#define ECHO fwrite( zconftext, zconfleng, 1, zconfout )
 #endif
 
 /* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
@@ -1540,6 +1586,14 @@ static int yy_get_next_buffer (void)
 	else
 		ret_val = EOB_ACT_CONTINUE_SCAN;
 
+	if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+		/* Extend the array by 50%, plus the number we really need. */
+		yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+		YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) zconfrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size  );
+		if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+			YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
+	}
+
 	(yy_n_chars) += number_to_move;
 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
 	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
@@ -1926,7 +1980,9 @@ static void zconfensure_buffer_stack (void)
 		(yy_buffer_stack) = (struct yy_buffer_state**)zconfalloc
 								(num_to_alloc * sizeof(struct yy_buffer_state*)
 								);
-		
+		if ( ! (yy_buffer_stack) )
+			YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" );
+								  
 		memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
 				
 		(yy_buffer_stack_max) = num_to_alloc;
@@ -1944,6 +2000,8 @@ static void zconfensure_buffer_stack (void)
 								((yy_buffer_stack),
 								num_to_alloc * sizeof(struct yy_buffer_state*)
 								);
+		if ( ! (yy_buffer_stack) )
+			YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" );
 
 		/* zero only the new slots.*/
 		memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
index 96521cb087ec..4a9af6f7886b 100644
--- a/scripts/kconfig/lkc.h
+++ b/scripts/kconfig/lkc.h
@@ -42,6 +42,14 @@ extern "C" {
 #define TF_PARAM	0x0002
 #define TF_OPTION	0x0004
 
+enum conf_def_mode {
+	def_default,
+	def_yes,
+	def_mod,
+	def_no,
+	def_random
+};
+
 #define T_OPT_MODULES		1
 #define T_OPT_DEFCONFIG_LIST	2
 #define T_OPT_ENV		3
@@ -69,6 +77,7 @@ const char *conf_get_configname(void);
 char *conf_get_default_confname(void);
 void sym_set_change_count(int count);
 void sym_add_change_count(int count);
+void conf_set_all_new_symbols(enum conf_def_mode mode);
 
 /* kconfig_load.c */
 void kconfig_load(void);
diff --git a/scripts/kconfig/zconf.l b/scripts/kconfig/zconf.l
index 4cea5c85cd0a..5164ef7ce499 100644
--- a/scripts/kconfig/zconf.l
+++ b/scripts/kconfig/zconf.l
@@ -1,5 +1,6 @@
 %option backup nostdinit noyywrap never-interactive full ecs
 %option 8bit backup nodefault perf-report perf-report
+%option noinput
 %x COMMAND HELP STRING PARAM
 %{
 /*
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 88e3934a8b8c..44ee94d2ab76 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -781,6 +781,7 @@ sub output_struct_xml(%) {
     print " <refsect1>\n";
     print "  <title>Members</title>\n";
 
+    if ($#{$args{'parameterlist'}} >= 0) {
     print "  <variablelist>\n";
     foreach $parameter (@{$args{'parameterlist'}}) {
       ($parameter =~ /^#/) && next;
@@ -798,6 +799,9 @@ sub output_struct_xml(%) {
       print "    </varlistentry>\n";
     }
     print "  </variablelist>\n";
+    } else {
+	print " <para>\n  None\n </para>\n";
+    }
     print " </refsect1>\n";
 
     output_section_xml(@_);
@@ -1403,7 +1407,7 @@ sub dump_struct($$) {
 	my $members = $3;
 
 	# ignore embedded structs or unions
-	$members =~ s/{.*?}//g;
+	$members =~ s/{.*}//g;
 
 	# ignore members marked private:
 	$members =~ s/\/\*.*?private:.*?public:.*?\*\///gos;
@@ -1643,6 +1647,7 @@ sub dump_function($$) {
     $prototype =~ s/^__always_inline +//;
     $prototype =~ s/^noinline +//;
     $prototype =~ s/__devinit +//;
+    $prototype =~ s/__init +//;
     $prototype =~ s/^#define\s+//; #ak added
     $prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//;
 
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 37d5c363fbcd..d4dc222a74f3 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -206,6 +206,20 @@ static void do_usb_table(void *symval, unsigned long size,
 		do_usb_entry_multi(symval + i, mod);
 }
 
+/* Looks like: hid:bNvNpN */
+static int do_hid_entry(const char *filename,
+			     struct hid_device_id *id, char *alias)
+{
+	id->vendor = TO_NATIVE(id->vendor);
+	id->product = TO_NATIVE(id->product);
+
+	sprintf(alias, "hid:b%04X", id->bus);
+	ADD(alias, "v", id->vendor != HID_ANY_ID, id->vendor);
+	ADD(alias, "p", id->product != HID_ANY_ID, id->product);
+
+	return 1;
+}
+
 /* Looks like: ieee1394:venNmoNspNverN */
 static int do_ieee1394_entry(const char *filename,
 			     struct ieee1394_device_id *id, char *alias)
@@ -340,11 +354,24 @@ static int do_acpi_entry(const char *filename,
 }
 
 /* looks like: "pnp:dD" */
-static int do_pnp_entry(const char *filename,
-			struct pnp_device_id *id, char *alias)
+static void do_pnp_device_entry(void *symval, unsigned long size,
+				struct module *mod)
 {
-	sprintf(alias, "pnp:d%s*", id->id);
-	return 1;
+	const unsigned long id_size = sizeof(struct pnp_device_id);
+	const unsigned int count = (size / id_size)-1;
+	const struct pnp_device_id *devs = symval;
+	unsigned int i;
+
+	device_id_check(mod->name, "pnp", size, id_size, symval);
+
+	for (i = 0; i < count; i++) {
+		const char *id = (char *)devs[i].id;
+
+		buf_printf(&mod->dev_table_buf,
+			   "MODULE_ALIAS(\"pnp:d%s*\");\n", id);
+		buf_printf(&mod->dev_table_buf,
+			   "MODULE_ALIAS(\"acpi*:%s:*\");\n", id);
+	}
 }
 
 /* looks like: "pnp:dD" for every device of the card */
@@ -388,9 +415,12 @@ static void do_pnp_card_entries(void *symval, unsigned long size,
 			}
 
 			/* add an individual alias for every device entry */
-			if (!dup)
+			if (!dup) {
 				buf_printf(&mod->dev_table_buf,
 					   "MODULE_ALIAS(\"pnp:d%s*\");\n", id);
+				buf_printf(&mod->dev_table_buf,
+					   "MODULE_ALIAS(\"acpi*:%s:*\");\n", id);
+			}
 		}
 	}
 }
@@ -613,7 +643,60 @@ static int do_i2c_entry(const char *filename, struct i2c_device_id *id,
 	return 1;
 }
 
-/* Ignore any prefix, eg. v850 prepends _ */
+static const struct dmifield {
+	const char *prefix;
+	int field;
+} dmi_fields[] = {
+	{ "bvn", DMI_BIOS_VENDOR },
+	{ "bvr", DMI_BIOS_VERSION },
+	{ "bd",  DMI_BIOS_DATE },
+	{ "svn", DMI_SYS_VENDOR },
+	{ "pn",  DMI_PRODUCT_NAME },
+	{ "pvr", DMI_PRODUCT_VERSION },
+	{ "rvn", DMI_BOARD_VENDOR },
+	{ "rn",  DMI_BOARD_NAME },
+	{ "rvr", DMI_BOARD_VERSION },
+	{ "cvn", DMI_CHASSIS_VENDOR },
+	{ "ct",  DMI_CHASSIS_TYPE },
+	{ "cvr", DMI_CHASSIS_VERSION },
+	{ NULL,  DMI_NONE }
+};
+
+static void dmi_ascii_filter(char *d, const char *s)
+{
+	/* Filter out characters we don't want to see in the modalias string */
+	for (; *s; s++)
+		if (*s > ' ' && *s < 127 && *s != ':')
+			*(d++) = *s;
+
+	*d = 0;
+}
+
+
+static int do_dmi_entry(const char *filename, struct dmi_system_id *id,
+			char *alias)
+{
+	int i, j;
+
+	sprintf(alias, "dmi*");
+
+	for (i = 0; i < ARRAY_SIZE(dmi_fields); i++) {
+		for (j = 0; j < 4; j++) {
+			if (id->matches[j].slot &&
+			    id->matches[j].slot == dmi_fields[i].field) {
+				sprintf(alias + strlen(alias), ":%s*",
+					dmi_fields[i].prefix);
+				dmi_ascii_filter(alias + strlen(alias),
+						 id->matches[j].substr);
+				strcat(alias, "*");
+			}
+		}
+	}
+
+	strcat(alias, ":");
+	return 1;
+}
+/* Ignore any prefix, eg. some architectures prepend _ */
 static inline int sym_is(const char *symbol, const char *name)
 {
 	const char *match;
@@ -676,6 +759,10 @@ void handle_moddevtable(struct module *mod, struct elf_info *info,
 	else if (sym_is(symname, "__mod_usb_device_table"))
 		/* special case to handle bcdDevice ranges */
 		do_usb_table(symval, sym->st_size, mod);
+	else if (sym_is(symname, "__mod_hid_device_table"))
+		do_table(symval, sym->st_size,
+			 sizeof(struct hid_device_id), "hid",
+			 do_hid_entry, mod);
 	else if (sym_is(symname, "__mod_ieee1394_device_table"))
 		do_table(symval, sym->st_size,
 			 sizeof(struct ieee1394_device_id), "ieee1394",
@@ -701,9 +788,7 @@ void handle_moddevtable(struct module *mod, struct elf_info *info,
 			 sizeof(struct acpi_device_id), "acpi",
 			 do_acpi_entry, mod);
 	else if (sym_is(symname, "__mod_pnp_device_table"))
-		do_table(symval, sym->st_size,
-			 sizeof(struct pnp_device_id), "pnp",
-			 do_pnp_entry, mod);
+		do_pnp_device_entry(symval, sym->st_size, mod);
 	else if (sym_is(symname, "__mod_pnp_card_device_table"))
 		do_pnp_card_entries(symval, sym->st_size, mod);
 	else if (sym_is(symname, "__mod_pcmcia_device_table"))
@@ -746,6 +831,10 @@ void handle_moddevtable(struct module *mod, struct elf_info *info,
 		do_table(symval, sym->st_size,
 			 sizeof(struct i2c_device_id), "i2c",
 			 do_i2c_entry, mod);
+	else if (sym_is(symname, "__mod_dmi_device_table"))
+		do_table(symval, sym->st_size,
+			 sizeof(struct dmi_system_id), "dmi",
+			 do_dmi_entry, mod);
 	free(zeros);
 }
 
diff --git a/scripts/mod/mk_elfconfig.c b/scripts/mod/mk_elfconfig.c
index db3881f14c2d..6a96d47bd1e6 100644
--- a/scripts/mod/mk_elfconfig.c
+++ b/scripts/mod/mk_elfconfig.c
@@ -55,7 +55,7 @@ main(int argc, char **argv)
 	else
 		exit(1);
 
-	if ((strcmp(argv[1], "v850") == 0) || (strcmp(argv[1], "h8300") == 0)
+	if ((strcmp(argv[1], "h8300") == 0)
 	    || (strcmp(argv[1], "blackfin") == 0))
 		printf("#define MODULE_SYMBOL_PREFIX \"_\"\n");
 	else
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index a07f91aac920..88921611b22e 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1468,7 +1468,7 @@ static void section_rel(const char *modname, struct elf_info *elf,
  * marked __initdata will be discarded when the module has been intialized.
  * Likewise for modules used built-in the sections marked __exit
  * are discarded because __exit marked function are supposed to be called
- * only when a moduel is unloaded which never happes for built-in modules.
+ * only when a module is unloaded which never happens for built-in modules.
  * The check_sec_ref() function traverses all relocation records
  * to find all references to a section that reference a section that will
  * be discarded and warns about it.
@@ -1726,6 +1726,14 @@ static void add_header(struct buffer *b, struct module *mod)
 	buf_printf(b, "};\n");
 }
 
+void add_staging_flag(struct buffer *b, const char *name)
+{
+	static const char *staging_dir = "drivers/staging";
+
+	if (strncmp(staging_dir, name, strlen(staging_dir)) == 0)
+		buf_printf(b, "\nMODULE_INFO(staging, \"Y\");\n");
+}
+
 /**
  * Record CRCs for unresolved symbols
  **/
@@ -1986,13 +1994,16 @@ static void read_markers(const char *fname)
 
 		mod = find_module(modname);
 		if (!mod) {
-			if (is_vmlinux(modname))
-				have_vmlinux = 1;
 			mod = new_module(NOFAIL(strdup(modname)));
 			mod->skip = 1;
 		}
+		if (is_vmlinux(modname)) {
+			have_vmlinux = 1;
+			mod->skip = 0;
+		}
 
-		add_marker(mod, marker, fmt);
+		if (!mod->skip)
+			add_marker(mod, marker, fmt);
 	}
 	return;
 fail:
@@ -2132,6 +2143,7 @@ int main(int argc, char **argv)
 		buf.pos = 0;
 
 		add_header(&buf, mod);
+		add_staging_flag(&buf, mod->name);
 		err |= add_versions(&buf, mod);
 		add_depends(&buf, mod, modules);
 		add_moddevtable(&buf, mod);
diff --git a/scripts/patch-kernel b/scripts/patch-kernel
index ece46ef0ba54..46a59cae3a0a 100755
--- a/scripts/patch-kernel
+++ b/scripts/patch-kernel
@@ -213,6 +213,7 @@ fi
 if [ $stopvers != "default" ]; then
 	STOPSUBLEVEL=`echo $stopvers | cut -d. -f3`
 	STOPEXTRA=`echo $stopvers | cut -d. -f4`
+	STOPFULLVERSION=${stopvers%%.$STOPEXTRA}
 	#echo "#___STOPSUBLEVEL=/$STOPSUBLEVEL/, STOPEXTRA=/$STOPEXTRA/"
 else
 	STOPSUBLEVEL=9999
@@ -249,7 +250,7 @@ while :				# incrementing SUBLEVEL (s in v.p.s)
 do
     CURRENTFULLVERSION="$VERSION.$PATCHLEVEL.$SUBLEVEL"
     EXTRAVER=
-    if [ $stopvers = $CURRENTFULLVERSION ]; then
+    if [ $STOPFULLVERSION = $CURRENTFULLVERSION ]; then
         echo "Stopping at $CURRENTFULLVERSION base as requested."
         break
     fi
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
new file mode 100755
index 000000000000..f56d760bd589
--- /dev/null
+++ b/scripts/recordmcount.pl
@@ -0,0 +1,395 @@
+#!/usr/bin/perl -w
+# (c) 2008, Steven Rostedt <srostedt@redhat.com>
+# Licensed under the terms of the GNU GPL License version 2
+#
+# recordmcount.pl - makes a section called __mcount_loc that holds
+#                   all the offsets to the calls to mcount.
+#
+#
+# What we want to end up with is a section in vmlinux called
+# __mcount_loc that contains a list of pointers to all the
+# call sites in the kernel that call mcount. Later on boot up, the kernel
+# will read this list, save the locations and turn them into nops.
+# When tracing or profiling is later enabled, these locations will then
+# be converted back to pointers to some function.
+#
+# This is no easy feat. This script is called just after the original
+# object is compiled and before it is linked.
+#
+# The references to the call sites are offsets from the section of text
+# that the call site is in. Hence, all functions in a section that
+# has a call site to mcount, will have the offset from the beginning of
+# the section and not the beginning of the function.
+#
+# The trick is to find a way to record the beginning of the section.
+# The way we do this is to look at the first function in the section
+# which will also be the location of that section after final link.
+# e.g.
+#
+#  .section ".text.sched"
+#  .globl my_func
+#  my_func:
+#        [...]
+#        call mcount  (offset: 0x5)
+#        [...]
+#        ret
+#  other_func:
+#        [...]
+#        call mcount (offset: 0x1b)
+#        [...]
+#
+# Both relocation offsets for the mcounts in the above example will be
+# offset from .text.sched. If we make another file called tmp.s with:
+#
+#  .section __mcount_loc
+#  .quad  my_func + 0x5
+#  .quad  my_func + 0x1b
+#
+# We can then compile this tmp.s into tmp.o, and link it to the original
+# object.
+#
+# But this gets hard if my_func is not globl (a static function).
+# In such a case we have:
+#
+#  .section ".text.sched"
+#  my_func:
+#        [...]
+#        call mcount  (offset: 0x5)
+#        [...]
+#        ret
+#  .globl my_func
+#  other_func:
+#        [...]
+#        call mcount (offset: 0x1b)
+#        [...]
+#
+# If we make the tmp.s the same as above, when we link together with
+# the original object, we will end up with two symbols for my_func:
+# one local, one global.  After final compile, we will end up with
+# an undefined reference to my_func.
+#
+# Since local objects can reference local variables, we need to find
+# a way to make tmp.o reference the local objects of the original object
+# file after it is linked together. To do this, we convert the my_func
+# into a global symbol before linking tmp.o. Then after we link tmp.o
+# we will only have a single symbol for my_func that is global.
+# We can convert my_func back into a local symbol and we are done.
+#
+# Here are the steps we take:
+#
+# 1) Record all the local symbols by using 'nm'
+# 2) Use objdump to find all the call site offsets and sections for
+#    mcount.
+# 3) Compile the list into its own object.
+# 4) Do we have to deal with local functions? If not, go to step 8.
+# 5) Make an object that converts these local functions to global symbols
+#    with objcopy.
+# 6) Link together this new object with the list object.
+# 7) Convert the local functions back to local symbols and rename
+#    the result as the original object.
+#    End.
+# 8) Link the object with the list object.
+# 9) Move the result back to the original object.
+#    End.
+#
+
+use strict;
+
+my $P = $0;
+$P =~ s@.*/@@g;
+
+my $V = '0.1';
+
+if ($#ARGV < 6) {
+	print "usage: $P arch objdump objcopy cc ld nm rm mv inputfile\n";
+	print "version: $V\n";
+	exit(1);
+}
+
+my ($arch, $objdump, $objcopy, $cc, $ld, $nm, $rm, $mv, $inputfile) = @ARGV;
+
+$objdump = "objdump" if ((length $objdump) == 0);
+$objcopy = "objcopy" if ((length $objcopy) == 0);
+$cc = "gcc" if ((length $cc) == 0);
+$ld = "ld" if ((length $ld) == 0);
+$nm = "nm" if ((length $nm) == 0);
+$rm = "rm" if ((length $rm) == 0);
+$mv = "mv" if ((length $mv) == 0);
+
+#print STDERR "running: $P '$arch' '$objdump' '$objcopy' '$cc' '$ld' " .
+#    "'$nm' '$rm' '$mv' '$inputfile'\n";
+
+my %locals;		# List of local (static) functions
+my %weak;		# List of weak functions
+my %convert;		# List of local functions used that needs conversion
+
+my $type;
+my $section_regex;	# Find the start of a section
+my $function_regex;	# Find the name of a function
+			#    (return offset and func name)
+my $mcount_regex;	# Find the call site to mcount (return offset)
+
+if ($arch eq "x86_64") {
+    $section_regex = "Disassembly of section";
+    $function_regex = "^([0-9a-fA-F]+)\\s+<(.*?)>:";
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\smcount([+-]0x[0-9a-zA-Z]+)?\$";
+    $type = ".quad";
+
+    # force flags for this arch
+    $ld .= " -m elf_x86_64";
+    $objdump .= " -M x86-64";
+    $objcopy .= " -O elf64-x86-64";
+    $cc .= " -m64";
+
+} elsif ($arch eq "i386") {
+    $section_regex = "Disassembly of section";
+    $function_regex = "^([0-9a-fA-F]+)\\s+<(.*?)>:";
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\smcount\$";
+    $type = ".long";
+
+    # force flags for this arch
+    $ld .= " -m elf_i386";
+    $objdump .= " -M i386";
+    $objcopy .= " -O elf32-i386";
+    $cc .= " -m32";
+
+} else {
+    die "Arch $arch is not supported with CONFIG_FTRACE_MCOUNT_RECORD";
+}
+
+my $text_found = 0;
+my $read_function = 0;
+my $opened = 0;
+my $mcount_section = "__mcount_loc";
+
+my $dirname;
+my $filename;
+my $prefix;
+my $ext;
+
+if ($inputfile =~ m,^(.*)/([^/]*)$,) {
+    $dirname = $1;
+    $filename = $2;
+} else {
+    $dirname = ".";
+    $filename = $inputfile;
+}
+
+if ($filename =~ m,^(.*)(\.\S),) {
+    $prefix = $1;
+    $ext = $2;
+} else {
+    $prefix = $filename;
+    $ext = "";
+}
+
+my $mcount_s = $dirname . "/.tmp_mc_" . $prefix . ".s";
+my $mcount_o = $dirname . "/.tmp_mc_" . $prefix . ".o";
+
+#
+# --globalize-symbols came out in 2.17, we must test the version
+# of objcopy, and if it is less than 2.17, then we can not
+# record local functions.
+my $use_locals = 01;
+my $local_warn_once = 0;
+my $found_version = 0;
+
+open (IN, "$objcopy --version |") || die "error running $objcopy";
+while (<IN>) {
+    if (/objcopy.*\s(\d+)\.(\d+)/) {
+	my $major = $1;
+	my $minor = $2;
+
+	$found_version = 1;
+	if ($major < 2 ||
+	    ($major == 2 && $minor < 17)) {
+	    $use_locals = 0;
+	}
+	last;
+    }
+}
+close (IN);
+
+if (!$found_version) {
+    print STDERR "WARNING: could not find objcopy version.\n" .
+	"\tDisabling local function references.\n";
+}
+
+
+#
+# Step 1: find all the local (static functions) and weak symbols.
+#        't' is local, 'w/W' is weak (we never use a weak function)
+#
+open (IN, "$nm $inputfile|") || die "error running $nm";
+while (<IN>) {
+    if (/^[0-9a-fA-F]+\s+t\s+(\S+)/) {
+	$locals{$1} = 1;
+    } elsif (/^[0-9a-fA-F]+\s+([wW])\s+(\S+)/) {
+	$weak{$2} = $1;
+    }
+}
+close(IN);
+
+my @offsets;		# Array of offsets of mcount callers
+my $ref_func;		# reference function to use for offsets
+my $offset = 0;		# offset of ref_func to section beginning
+
+##
+# update_funcs - print out the current mcount callers
+#
+#  Go through the list of offsets to callers and write them to
+#  the output file in a format that can be read by an assembler.
+#
+sub update_funcs
+{
+    return if ($#offsets < 0);
+
+    defined($ref_func) || die "No function to reference";
+
+    # A section only had a weak function, to represent it.
+    # Unfortunately, a weak function may be overwritten by another
+    # function of the same name, making all these offsets incorrect.
+    # To be safe, we simply print a warning and bail.
+    if (defined $weak{$ref_func}) {
+	print STDERR
+	    "$inputfile: WARNING: referencing weak function" .
+	    " $ref_func for mcount\n";
+	return;
+    }
+
+    # is this function static? If so, note this fact.
+    if (defined $locals{$ref_func}) {
+
+	# only use locals if objcopy supports globalize-symbols
+	if (!$use_locals) {
+	    return;
+	}
+	$convert{$ref_func} = 1;
+    }
+
+    # Loop through all the mcount caller offsets and print a reference
+    # to the caller based from the ref_func.
+    for (my $i=0; $i <= $#offsets; $i++) {
+	if (!$opened) {
+	    open(FILE, ">$mcount_s") || die "can't create $mcount_s\n";
+	    $opened = 1;
+	    print FILE "\t.section $mcount_section,\"a\",\@progbits\n";
+	}
+	printf FILE "\t%s %s + %d\n", $type, $ref_func, $offsets[$i] - $offset;
+    }
+}
+
+#
+# Step 2: find the sections and mcount call sites
+#
+open(IN, "$objdump -dr $inputfile|") || die "error running $objdump";
+
+my $text;
+
+while (<IN>) {
+    # is it a section?
+    if (/$section_regex/) {
+	$read_function = 1;
+	# print out any recorded offsets
+	update_funcs() if ($text_found);
+
+	# reset all markers and arrays
+	$text_found = 0;
+	undef($ref_func);
+	undef(@offsets);
+
+    # section found, now is this a start of a function?
+    } elsif ($read_function && /$function_regex/) {
+	$text_found = 1;
+	$offset = hex $1;
+	$text = $2;
+
+	# if this is either a local function or a weak function
+	# keep looking for functions that are global that
+	# we can use safely.
+	if (!defined($locals{$text}) && !defined($weak{$text})) {
+	    $ref_func = $text;
+	    $read_function = 0;
+	} else {
+	    # if we already have a function, and this is weak, skip it
+	    if (!defined($ref_func) || !defined($weak{$text})) {
+		$ref_func = $text;
+	    }
+	}
+    }
+
+    # is this a call site to mcount? If so, record it to print later
+    if ($text_found && /$mcount_regex/) {
+	$offsets[$#offsets + 1] = hex $1;
+    }
+}
+
+# dump out anymore offsets that may have been found
+update_funcs() if ($text_found);
+
+# If we did not find any mcount callers, we are done (do nothing).
+if (!$opened) {
+    exit(0);
+}
+
+close(FILE);
+
+#
+# Step 3: Compile the file that holds the list of call sites to mcount.
+#
+`$cc -o $mcount_o -c $mcount_s`;
+
+my @converts = keys %convert;
+
+#
+# Step 4: Do we have sections that started with local functions?
+#
+if ($#converts >= 0) {
+    my $globallist = "";
+    my $locallist = "";
+
+    foreach my $con (@converts) {
+	$globallist .= " --globalize-symbol $con";
+	$locallist .= " --localize-symbol $con";
+    }
+
+    my $globalobj = $dirname . "/.tmp_gl_" . $filename;
+    my $globalmix = $dirname . "/.tmp_mx_" . $filename;
+
+    #
+    # Step 5: set up each local function as a global
+    #
+    `$objcopy $globallist $inputfile $globalobj`;
+
+    #
+    # Step 6: Link the global version to our list.
+    #
+    `$ld -r $globalobj $mcount_o -o $globalmix`;
+
+    #
+    # Step 7: Convert the local functions back into local symbols
+    #
+    `$objcopy $locallist $globalmix $inputfile`;
+
+    # Remove the temp files
+    `$rm $globalobj $globalmix`;
+
+} else {
+
+    my $mix = $dirname . "/.tmp_mx_" . $filename;
+
+    #
+    # Step 8: Link the object with our list of call sites object.
+    #
+    `$ld -r $inputfile $mcount_o -o $mix`;
+
+    #
+    # Step 9: Move the result back to the original object.
+    #
+    `$mv $mix $inputfile`;
+}
+
+# Clean up the temp files
+`$rm $mcount_o $mcount_s`;
+
+exit(0);
diff --git a/scripts/selinux/Makefile b/scripts/selinux/Makefile
new file mode 100644
index 000000000000..ca4b1ec01822
--- /dev/null
+++ b/scripts/selinux/Makefile
@@ -0,0 +1,2 @@
+subdir-y := mdp
+subdir-	+= mdp
diff --git a/scripts/selinux/README b/scripts/selinux/README
new file mode 100644
index 000000000000..a936315ba2c8
--- /dev/null
+++ b/scripts/selinux/README
@@ -0,0 +1,2 @@
+Please see Documentation/SELinux.txt for information on
+installing a dummy SELinux policy.
diff --git a/scripts/selinux/install_policy.sh b/scripts/selinux/install_policy.sh
new file mode 100644
index 000000000000..7b9ccf61f8f9
--- /dev/null
+++ b/scripts/selinux/install_policy.sh
@@ -0,0 +1,69 @@
+#!/bin/sh
+if [ `id -u` -ne 0 ]; then
+	echo "$0: must be root to install the selinux policy"
+	exit 1
+fi
+SF=`which setfiles`
+if [ $? -eq 1 ]; then
+	if [ -f /sbin/setfiles ]; then
+		SF="/usr/setfiles"
+	else
+		echo "no selinux tools installed: setfiles"
+		exit 1
+	fi
+fi
+
+cd mdp
+
+CP=`which checkpolicy`
+VERS=`$CP -V | awk '{print $1}'`
+
+./mdp policy.conf file_contexts
+$CP -o policy.$VERS policy.conf
+
+mkdir -p /etc/selinux/dummy/policy
+mkdir -p /etc/selinux/dummy/contexts/files
+
+cp file_contexts /etc/selinux/dummy/contexts/files
+cp dbus_contexts /etc/selinux/dummy/contexts
+cp policy.$VERS /etc/selinux/dummy/policy
+FC_FILE=/etc/selinux/dummy/contexts/files/file_contexts
+
+if [ ! -d /etc/selinux ]; then
+	mkdir -p /etc/selinux
+fi
+if [ ! -f /etc/selinux/config ]; then
+	cat > /etc/selinux/config << EOF
+SELINUX=enforcing
+SELINUXTYPE=dummy
+EOF
+else
+	TYPE=`cat /etc/selinux/config | grep "^SELINUXTYPE" | tail -1 | awk -F= '{ print $2 '}`
+	if [ "eq$TYPE" != "eqdummy" ]; then
+		selinuxenabled
+		if [ $? -eq 0 ]; then
+			echo "SELinux already enabled with a non-dummy policy."
+			echo "Exiting.  Please install policy by hand if that"
+			echo "is what you REALLY want."
+			exit 1
+		fi
+		mv /etc/selinux/config /etc/selinux/config.mdpbak
+		grep -v "^SELINUXTYPE" /etc/selinux/config.mdpbak >> /etc/selinux/config
+		echo "SELINUXTYPE=dummy" >> /etc/selinux/config
+	fi
+fi
+
+cd /etc/selinux/dummy/contexts/files
+$SF file_contexts /
+
+mounts=`cat /proc/$$/mounts | egrep "ext2|ext3|xfs|jfs|ext4|ext4dev|gfs2" | awk '{ print $2 '}`
+$SF file_contexts $mounts
+
+
+dodev=`cat /proc/$$/mounts | grep "/dev "`
+if [ "eq$dodev" != "eq" ]; then
+	mount --move /dev /mnt
+	$SF file_contexts /dev
+	mount --move /mnt /dev
+fi
+
diff --git a/scripts/selinux/mdp/.gitignore b/scripts/selinux/mdp/.gitignore
new file mode 100644
index 000000000000..654546d8dffd
--- /dev/null
+++ b/scripts/selinux/mdp/.gitignore
@@ -0,0 +1,2 @@
+# Generated file
+mdp
diff --git a/scripts/selinux/mdp/Makefile b/scripts/selinux/mdp/Makefile
new file mode 100644
index 000000000000..eb365b333441
--- /dev/null
+++ b/scripts/selinux/mdp/Makefile
@@ -0,0 +1,5 @@
+hostprogs-y	:= mdp
+HOST_EXTRACFLAGS += -Isecurity/selinux/include
+
+always		:= $(hostprogs-y)
+clean-files	:= $(hostprogs-y) policy.* file_contexts
diff --git a/scripts/selinux/mdp/dbus_contexts b/scripts/selinux/mdp/dbus_contexts
new file mode 100644
index 000000000000..116e684f9fc1
--- /dev/null
+++ b/scripts/selinux/mdp/dbus_contexts
@@ -0,0 +1,6 @@
+<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
+ "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
+<busconfig>
+  <selinux>
+  </selinux>
+</busconfig>
diff --git a/scripts/selinux/mdp/mdp.c b/scripts/selinux/mdp/mdp.c
new file mode 100644
index 000000000000..ca757d486187
--- /dev/null
+++ b/scripts/selinux/mdp/mdp.c
@@ -0,0 +1,242 @@
+/*
+ *
+ * mdp - make dummy policy
+ *
+ * When pointed at a kernel tree, builds a dummy policy for that kernel
+ * with exactly one type with full rights to itself.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2006
+ *
+ * Authors: Serge E. Hallyn <serue@us.ibm.com>
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <string.h>
+
+#include "flask.h"
+
+void usage(char *name)
+{
+	printf("usage: %s [-m] policy_file context_file\n", name);
+	exit(1);
+}
+
+void find_common_name(char *cname, char *dest, int len)
+{
+	char *start, *end;
+
+	start = strchr(cname, '_')+1;
+	end = strchr(start, '_');
+	if (!start || !end || start-cname > len || end-start > len) {
+		printf("Error with commons defines\n");
+		exit(1);
+	}
+	strncpy(dest, start, end-start);
+	dest[end-start] = '\0';
+}
+
+#define S_(x) x,
+static char *classlist[] = {
+#include "class_to_string.h"
+	NULL
+};
+#undef S_
+
+#include "initial_sid_to_string.h"
+
+#define TB_(x) char *x[] = {
+#define TE_(x) NULL };
+#define S_(x) x,
+#include "common_perm_to_string.h"
+#undef TB_
+#undef TE_
+#undef S_
+
+struct common {
+	char *cname;
+	char **perms;
+};
+struct common common[] = {
+#define TB_(x) { #x, x },
+#define S_(x)
+#define TE_(x)
+#include "common_perm_to_string.h"
+#undef TB_
+#undef TE_
+#undef S_
+};
+
+#define S_(x, y, z) {x, #y},
+struct av_inherit {
+	int class;
+	char *common;
+};
+struct av_inherit av_inherit[] = {
+#include "av_inherit.h"
+};
+#undef S_
+
+#include "av_permissions.h"
+#define S_(x, y, z) {x, y, z},
+struct av_perms {
+	int class;
+	int perm_i;
+	char *perm_s;
+};
+struct av_perms av_perms[] = {
+#include "av_perm_to_string.h"
+};
+#undef S_
+
+int main(int argc, char *argv[])
+{
+	int i, j, mls = 0;
+	char **arg, *polout, *ctxout;
+	int classlist_len, initial_sid_to_string_len;
+	FILE *fout;
+
+	if (argc < 3)
+		usage(argv[0]);
+	arg = argv+1;
+	if (argc==4 && strcmp(argv[1], "-m") == 0) {
+		mls = 1;
+		arg++;
+	}
+	polout = *arg++;
+	ctxout = *arg;
+
+	fout = fopen(polout, "w");
+	if (!fout) {
+		printf("Could not open %s for writing\n", polout);
+		usage(argv[0]);
+	}
+
+	classlist_len = sizeof(classlist) / sizeof(char *);
+	/* print out the classes */
+	for (i=1; i < classlist_len; i++) {
+		if(classlist[i])
+			fprintf(fout, "class %s\n", classlist[i]);
+		else
+			fprintf(fout, "class user%d\n", i);
+	}
+	fprintf(fout, "\n");
+
+	initial_sid_to_string_len = sizeof(initial_sid_to_string) / sizeof (char *);
+	/* print out the sids */
+	for (i=1; i < initial_sid_to_string_len; i++)
+		fprintf(fout, "sid %s\n", initial_sid_to_string[i]);
+	fprintf(fout, "\n");
+
+	/* print out the commons */
+	for (i=0; i< sizeof(common)/sizeof(struct common); i++) {
+		char cname[101];
+		find_common_name(common[i].cname, cname, 100);
+		cname[100] = '\0';
+		fprintf(fout, "common %s\n{\n", cname);
+		for (j=0; common[i].perms[j]; j++)
+			fprintf(fout, "\t%s\n", common[i].perms[j]);
+		fprintf(fout, "}\n\n");
+	}
+	fprintf(fout, "\n");
+
+	/* print out the class permissions */
+	for (i=1; i < classlist_len; i++) {
+		if (classlist[i]) {
+			int firstperm = -1, numperms = 0;
+
+			fprintf(fout, "class %s\n", classlist[i]);
+			/* does it inherit from a common? */
+			for (j=0; j < sizeof(av_inherit)/sizeof(struct av_inherit); j++)
+				if (av_inherit[j].class == i)
+					fprintf(fout, "inherits %s\n", av_inherit[j].common);
+
+			for (j=0; j < sizeof(av_perms)/sizeof(struct av_perms); j++) {
+				if (av_perms[j].class == i) {
+					if (firstperm == -1)
+						firstperm = j;
+					numperms++;
+				}
+			}
+			if (!numperms) {
+				fprintf(fout, "\n");
+				continue;
+			}
+
+			fprintf(fout, "{\n");
+			/* print out the av_perms */
+			for (j=0; j < numperms; j++) {
+				fprintf(fout, "\t%s\n", av_perms[firstperm+j].perm_s);
+			}
+			fprintf(fout, "}\n\n");
+		}
+	}
+	fprintf(fout, "\n");
+
+	/* NOW PRINT OUT MLS STUFF */
+	if (mls) {
+		printf("MLS not yet implemented\n");
+		exit(1);
+	}
+
+	/* types, roles, and allows */
+	fprintf(fout, "type base_t;\n");
+	fprintf(fout, "role base_r types { base_t };\n");
+	for (i=1; i < classlist_len; i++) {
+		if (classlist[i])
+			fprintf(fout, "allow base_t base_t:%s *;\n", classlist[i]);
+		else
+			fprintf(fout, "allow base_t base_t:user%d *;\n", i);
+	}
+	fprintf(fout, "user user_u roles { base_r };\n");
+	fprintf(fout, "\n");
+
+	/* default sids */
+	for (i=1; i < initial_sid_to_string_len; i++)
+		fprintf(fout, "sid %s user_u:base_r:base_t\n", initial_sid_to_string[i]);
+	fprintf(fout, "\n");
+
+
+	fprintf(fout, "fs_use_xattr ext2 user_u:base_r:base_t;\n");
+	fprintf(fout, "fs_use_xattr ext3 user_u:base_r:base_t;\n");
+	fprintf(fout, "fs_use_xattr jfs user_u:base_r:base_t;\n");
+	fprintf(fout, "fs_use_xattr xfs user_u:base_r:base_t;\n");
+	fprintf(fout, "fs_use_xattr reiserfs user_u:base_r:base_t;\n");
+
+	fprintf(fout, "fs_use_task pipefs user_u:base_r:base_t;\n");
+	fprintf(fout, "fs_use_task sockfs user_u:base_r:base_t;\n");
+
+	fprintf(fout, "fs_use_trans devpts user_u:base_r:base_t;\n");
+	fprintf(fout, "fs_use_trans tmpfs user_u:base_r:base_t;\n");
+	fprintf(fout, "fs_use_trans shm user_u:base_r:base_t;\n");
+
+	fprintf(fout, "genfscon proc / user_u:base_r:base_t\n");
+
+	fclose(fout);
+
+	fout = fopen(ctxout, "w");
+	if (!fout) {
+		printf("Wrote policy, but cannot open %s for writing\n", ctxout);
+		usage(argv[0]);
+	}
+	fprintf(fout, "/ user_u:base_r:base_t\n");
+	fprintf(fout, "/.* user_u:base_r:base_t\n");
+	fclose(fout);
+
+	return 0;
+}
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index 1c1bdaf7348a..83b75126c9f7 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -12,7 +12,9 @@ cd "${1:-.}" || usage
 if head=`git rev-parse --verify HEAD 2>/dev/null`; then
 	# Do we have an untagged version?
 	if git name-rev --tags HEAD | grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' > /dev/null; then
-	        git describe | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+		if tag=`git describe 2>/dev/null`; then
+			echo $tag | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+		fi
 	fi
 
 	# Are there uncommitted changes?
diff --git a/scripts/ver_linux b/scripts/ver_linux
index 7ac0e309be09..dbb3037f1346 100755
--- a/scripts/ver_linux
+++ b/scripts/ver_linux
@@ -4,7 +4,6 @@
 # /bin /sbin /usr/bin /usr/sbin /usr/local/bin, but it may
 # differ on your system.
 #
-PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/local/sbin:$PATH
 echo 'If some fields are empty or look unusual you may have an old version.'
 echo 'Compare to the current minimal requirements in Documentation/Changes.'
 echo ' '