Merge remote branch 'wireless-next/master' into ath6kl-next

6 files changed, 162 insertions, 98 deletions

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 3152ddfb4294..f9261c253735 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1160,6 +1160,15 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
  *	&enum nl80211_feature_flags and is advertised in wiphy information.
+ * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
+ *
+ *	requests while operating in AP-mode.
+ *	This attribute holds a bitmap of the supported protocols for
+ *	offloading (see &enum nl80211_probe_resp_offload_support_attr).
+ *
+ * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
+ *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
+ *	to be filled by the FW.
  *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -1395,6 +1404,10 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_FEATURE_FLAGS,
 
+	NL80211_ATTR_PROBE_RESP_OFFLOAD,
+
+	NL80211_ATTR_PROBE_RESP,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2727,4 +2740,25 @@ enum nl80211_feature_flags {
 	NL80211_FEATURE_SK_TX_STATUS	= 1 << 0,
 };
 
+/**
+ * enum nl80211_probe_resp_offload_support_attr - optional supported
+ *	protocols for probe-response offloading by the driver/FW.
+ *	To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
+ *	Each enum value represents a bit in the bitmap of supported
+ *	protocols. Typically a subset of probe-requests belonging to a
+ *	supported protocol will be excluded from offload and uploaded
+ *	to the host.
+ *
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
+ */
+enum nl80211_probe_resp_offload_support_attr {
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS =	1<<0,
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 =	1<<1,
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P =	1<<2,
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U =	1<<3,
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e1ee1416631d..8d7ba0961d3e 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -391,6 +391,8 @@ struct cfg80211_crypto_settings {
  * @assocresp_ies: extra information element(s) to add into (Re)Association
  *	Response frames or %NULL
  * @assocresp_ies_len: length of assocresp_ies in octets
+ * @probe_resp_len: length of probe response template (@probe_resp)
+ * @probe_resp: probe response template (AP mode only)
  */
 struct beacon_parameters {
 	u8 *head, *tail;
@@ -408,6 +410,8 @@ struct beacon_parameters {
 	size_t proberesp_ies_len;
 	const u8 *assocresp_ies;
 	size_t assocresp_ies_len;
+	int probe_resp_len;
+	u8 *probe_resp;
 };
 
 /**
@@ -1342,6 +1346,9 @@ struct cfg80211_gtk_rekey_data {
  *	doesn't verify much. Note, however, that the passed netdev may be
  *	%NULL as well if the user requested changing the channel for the
  *	device itself, or for a monitor interface.
+ * @get_channel: Get the current operating channel, should return %NULL if
+ *	there's no single defined operating channel if for example the
+ *	device implements channel hopping for multi-channel virtual interfaces.
  *
  * @scan: Request to do a scan. If returning zero, the scan request is given
  *	the driver, and will be valid until passed to cfg80211_scan_done().
@@ -1627,6 +1634,8 @@ struct cfg80211_ops {
 
 	int	(*probe_client)(struct wiphy *wiphy, struct net_device *dev,
 				const u8 *peer, u64 *cookie);
+
+	struct ieee80211_channel *(*get_channel)(struct wiphy *wiphy);
 };
 
 /*
@@ -1689,6 +1698,8 @@ struct cfg80211_ops {
  * @WIPHY_FLAG_REPORTS_OBSS: the device will report beacons from other BSSes
  *	when there are virtual interfaces in AP mode by calling
  *	cfg80211_report_obss_beacon().
+ * @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD: When operating as an AP, the device
+ *	responds to probe-requests in hardware.
  */
 enum wiphy_flags {
 	WIPHY_FLAG_CUSTOM_REGULATORY		= BIT(0),
@@ -1709,6 +1720,7 @@ enum wiphy_flags {
 	WIPHY_FLAG_TDLS_EXTERNAL_SETUP		= BIT(16),
 	WIPHY_FLAG_HAVE_AP_SME			= BIT(17),
 	WIPHY_FLAG_REPORTS_OBSS			= BIT(18),
+	WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD	= BIT(19),
 };
 
 /**
@@ -1977,6 +1989,13 @@ struct wiphy {
 	u32 available_antennas_tx;
 	u32 available_antennas_rx;
 
+	/*
+	 * Bitmap of supported protocols for probe response offloading
+	 * see &enum nl80211_probe_resp_offload_support_attr. Only valid
+	 * when the wiphy flag @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD is set.
+	 */
+	u32 probe_resp_offload;
+
 	/* If multiple wiphys are registered and you're handed e.g.
 	 * a regular netdev with assigned ieee80211_ptr, you won't
 	 * know whether it points to a wiphy your driver has registered
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
index 7e2c4d483ad0..71392545d0a1 100644
--- a/include/net/ieee80211_radiotap.h
+++ b/include/net/ieee80211_radiotap.h
@@ -271,14 +271,6 @@ enum ieee80211_radiotap_type {
 #define IEEE80211_RADIOTAP_MCS_FEC_LDPC		0x10
 
 
-/* Ugly macro to convert literal channel numbers into their mhz equivalents
- * There are certianly some conditions that will break this (like feeding it '30')
- * but they shouldn't arise since nothing talks on channel 30. */
-#define ieee80211chan2mhz(x) \
-	(((x) <= 14) ? \
-	(((x) == 14) ? 2484 : ((x) * 5) + 2407) : \
-	((x) + 1000) * 5)
-
 /* helpers */
 static inline int ieee80211_get_radiotap_len(unsigned char *data)
 {
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 2714646b298f..0756049ae76d 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -166,6 +166,7 @@ struct ieee80211_low_level_stats {
  *	that it is only ever disabled for station mode.
  * @BSS_CHANGED_IDLE: Idle changed for this BSS/interface.
  * @BSS_CHANGED_SSID: SSID changed for this BSS (AP mode)
+ * @BSS_CHANGED_AP_PROBE_RESP: Probe Response changed for this BSS (AP mode)
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
@@ -184,6 +185,7 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_QOS			= 1<<13,
 	BSS_CHANGED_IDLE		= 1<<14,
 	BSS_CHANGED_SSID		= 1<<15,
+	BSS_CHANGED_AP_PROBE_RESP	= 1<<16,
 
 	/* when adding here, make sure to change ieee80211_reconfig */
 };
@@ -2675,6 +2677,19 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 }
 
 /**
+ * ieee80211_proberesp_get - retrieve a Probe Response template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a Probe Response template which can, for example, be uploaded to
+ * hardware. The destination address should be set by the caller.
+ *
+ * Can only be called in AP mode.
+ */
+struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
+					struct ieee80211_vif *vif);
+
+/**
  * ieee80211_pspoll_get - retrieve a PS Poll template
  * @hw: pointer obtained from ieee80211_alloc_hw().
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
diff --git a/include/net/nfc/nci.h b/include/net/nfc/nci.h
index 39b85bc0804f..b61eb6c9df14 100644
--- a/include/net/nfc/nci.h
+++ b/include/net/nfc/nci.h
@@ -34,31 +34,30 @@
 #define NCI_MAX_NUM_CONN					10
 
 /* NCI Status Codes */
-#define	NCI_STATUS_OK						0x00
-#define	NCI_STATUS_REJECTED					0x01
-#define	NCI_STATUS_MESSAGE_CORRUPTED				0x02
-#define	NCI_STATUS_BUFFER_FULL					0x03
-#define	NCI_STATUS_FAILED					0x04
-#define	NCI_STATUS_NOT_INITIALIZED				0x05
-#define	NCI_STATUS_SYNTAX_ERROR					0x06
-#define	NCI_STATUS_SEMANTIC_ERROR				0x07
-#define	NCI_STATUS_UNKNOWN_GID					0x08
-#define	NCI_STATUS_UNKNOWN_OID					0x09
-#define	NCI_STATUS_INVALID_PARAM				0x0a
-#define	NCI_STATUS_MESSAGE_SIZE_EXCEEDED			0x0b
+#define NCI_STATUS_OK						0x00
+#define NCI_STATUS_REJECTED					0x01
+#define NCI_STATUS_RF_FRAME_CORRUPTED				0x02
+#define NCI_STATUS_FAILED					0x03
+#define NCI_STATUS_NOT_INITIALIZED				0x04
+#define NCI_STATUS_SYNTAX_ERROR					0x05
+#define NCI_STATUS_SEMANTIC_ERROR				0x06
+#define NCI_STATUS_UNKNOWN_GID					0x07
+#define NCI_STATUS_UNKNOWN_OID					0x08
+#define NCI_STATUS_INVALID_PARAM				0x09
+#define NCI_STATUS_MESSAGE_SIZE_EXCEEDED			0x0a
 /* Discovery Specific Status Codes */
-#define	NCI_STATUS_DISCOVERY_ALREADY_STARTED			0xa0
-#define	NCI_STATUS_DISCOVERY_TARGET_ACTIVATION_FAILED		0xa1
+#define NCI_STATUS_DISCOVERY_ALREADY_STARTED			0xa0
+#define NCI_STATUS_DISCOVERY_TARGET_ACTIVATION_FAILED		0xa1
+#define NCI_STATUS_DISCOVERY_TEAR_DOWN				0xa2
 /* RF Interface Specific Status Codes */
-#define	NCI_STATUS_RF_TRANSMISSION_ERROR			0xb0
-#define	NCI_STATUS_RF_PROTOCOL_ERROR				0xb1
-#define	NCI_STATUS_RF_TIMEOUT_ERROR				0xb2
-#define	NCI_STATUS_RF_LINK_LOSS_ERROR				0xb3
+#define NCI_STATUS_RF_TRANSMISSION_ERROR			0xb0
+#define NCI_STATUS_RF_PROTOCOL_ERROR				0xb1
+#define NCI_STATUS_RF_TIMEOUT_ERROR				0xb2
 /* NFCEE Interface Specific Status Codes */
-#define	NCI_STATUS_MAX_ACTIVE_NFCEE_INTERFACES_REACHED		0xc0
-#define	NCI_STATUS_NFCEE_INTERFACE_ACTIVATION_FAILED		0xc1
-#define	NCI_STATUS_NFCEE_TRANSMISSION_ERROR			0xc2
-#define	NCI_STATUS_NFCEE_PROTOCOL_ERROR				0xc3
+#define NCI_STATUS_MAX_ACTIVE_NFCEE_INTERFACES_REACHED		0xc0
+#define NCI_STATUS_NFCEE_INTERFACE_ACTIVATION_FAILED		0xc1
+#define NCI_STATUS_NFCEE_TRANSMISSION_ERROR			0xc2
+#define NCI_STATUS_NFCEE_PROTOCOL_ERROR				0xc3
 #define NCI_STATUS_NFCEE_TIMEOUT_ERROR				0xc4
 
 /* NCI RF Technology and Mode */
@@ -73,6 +72,21 @@
 #define NCI_NFC_A_ACTIVE_LISTEN_MODE				0x83
 #define NCI_NFC_F_ACTIVE_LISTEN_MODE				0x85
 
+/* NCI RF Technologies */
+#define NCI_NFC_RF_TECHNOLOGY_A					0x00
+#define NCI_NFC_RF_TECHNOLOGY_B					0x01
+#define NCI_NFC_RF_TECHNOLOGY_F					0x02
+#define NCI_NFC_RF_TECHNOLOGY_15693				0x03
+
+/* NCI Bit Rates */
+#define NCI_NFC_BIT_RATE_106					0x00
+#define NCI_NFC_BIT_RATE_212					0x01
+#define NCI_NFC_BIT_RATE_424					0x02
+#define NCI_NFC_BIT_RATE_848					0x03
+#define NCI_NFC_BIT_RATE_1696					0x04
+#define NCI_NFC_BIT_RATE_3392					0x05
+#define NCI_NFC_BIT_RATE_6784					0x06
+
 /* NCI RF Protocols */
 #define NCI_RF_PROTOCOL_UNKNOWN					0x00
 #define NCI_RF_PROTOCOL_T1T					0x01
@@ -82,10 +96,20 @@
 #define NCI_RF_PROTOCOL_NFC_DEP					0x05
 
 /* NCI RF Interfaces */
-#define NCI_RF_INTERFACE_RFU					0x00
-#define	NCI_RF_INTERFACE_FRAME					0x01
-#define	NCI_RF_INTERFACE_ISO_DEP				0x02
-#define	NCI_RF_INTERFACE_NFC_DEP				0x03
+#define NCI_RF_INTERFACE_NFCEE_DIRECT				0x00
+#define NCI_RF_INTERFACE_FRAME					0x01
+#define NCI_RF_INTERFACE_ISO_DEP				0x02
+#define NCI_RF_INTERFACE_NFC_DEP				0x03
+
+/* NCI Reset types */
+#define NCI_RESET_TYPE_KEEP_CONFIG				0x00
+#define NCI_RESET_TYPE_RESET_CONFIG				0x01
+
+/* NCI Static RF connection ID */
+#define NCI_STATIC_RF_CONN_ID					0x00
+
+/* NCI Data Flow Control */
+#define NCI_DATA_FLOW_CONTROL_NOT_USED				0xff
 
 /* NCI RF_DISCOVER_MAP_CMD modes */
 #define NCI_DISC_MAP_MODE_POLL					0x01
@@ -94,25 +118,22 @@
 
 /* NCI Discovery Types */
 #define NCI_DISCOVERY_TYPE_POLL_A_PASSIVE			0x00
-#define	NCI_DISCOVERY_TYPE_POLL_B_PASSIVE			0x01
-#define	NCI_DISCOVERY_TYPE_POLL_F_PASSIVE			0x02
-#define	NCI_DISCOVERY_TYPE_POLL_A_ACTIVE			0x03
-#define	NCI_DISCOVERY_TYPE_POLL_F_ACTIVE			0x05
-#define	NCI_DISCOVERY_TYPE_WAKEUP_A_PASSIVE			0x06
-#define	NCI_DISCOVERY_TYPE_WAKEUP_B_PASSIVE			0x07
-#define	NCI_DISCOVERY_TYPE_WAKEUP_A_ACTIVE			0x09
-#define	NCI_DISCOVERY_TYPE_LISTEN_A_PASSIVE			0x80
-#define	NCI_DISCOVERY_TYPE_LISTEN_B_PASSIVE			0x81
-#define	NCI_DISCOVERY_TYPE_LISTEN_F_PASSIVE			0x82
-#define	NCI_DISCOVERY_TYPE_LISTEN_A_ACTIVE			0x83
-#define	NCI_DISCOVERY_TYPE_LISTEN_F_ACTIVE			0x85
+#define NCI_DISCOVERY_TYPE_POLL_B_PASSIVE			0x01
+#define NCI_DISCOVERY_TYPE_POLL_F_PASSIVE			0x02
+#define NCI_DISCOVERY_TYPE_POLL_A_ACTIVE			0x03
+#define NCI_DISCOVERY_TYPE_POLL_F_ACTIVE			0x05
+#define NCI_DISCOVERY_TYPE_WAKEUP_A_ACTIVE			0x09
+#define NCI_DISCOVERY_TYPE_LISTEN_A_PASSIVE			0x80
+#define NCI_DISCOVERY_TYPE_LISTEN_B_PASSIVE			0x81
+#define NCI_DISCOVERY_TYPE_LISTEN_F_PASSIVE			0x82
+#define NCI_DISCOVERY_TYPE_LISTEN_A_ACTIVE			0x83
+#define NCI_DISCOVERY_TYPE_LISTEN_F_ACTIVE			0x85
 
 /* NCI Deactivation Type */
-#define	NCI_DEACTIVATE_TYPE_IDLE_MODE				0x00
-#define	NCI_DEACTIVATE_TYPE_SLEEP_MODE				0x01
-#define	NCI_DEACTIVATE_TYPE_SLEEP_AF_MODE			0x02
-#define	NCI_DEACTIVATE_TYPE_RF_LINK_LOSS			0x03
-#define	NCI_DEACTIVATE_TYPE_DISCOVERY_ERROR			0x04
+#define NCI_DEACTIVATE_TYPE_IDLE_MODE				0x00
+#define NCI_DEACTIVATE_TYPE_SLEEP_MODE				0x01
+#define NCI_DEACTIVATE_TYPE_SLEEP_AF_MODE			0x02
+#define NCI_DEACTIVATE_TYPE_DISCOVERY				0x03
 
 /* Message Type (MT) */
 #define NCI_MT_DATA_PKT						0x00
@@ -144,10 +165,10 @@
 #define nci_conn_id(hdr)		(__u8)(((hdr)[0])&0x0f)
 
 /* GID values */
-#define	NCI_GID_CORE						0x0
-#define	NCI_GID_RF_MGMT						0x1
-#define	NCI_GID_NFCEE_MGMT					0x2
-#define	NCI_GID_PROPRIETARY					0xf
+#define NCI_GID_CORE						0x0
+#define NCI_GID_RF_MGMT						0x1
+#define NCI_GID_NFCEE_MGMT					0x2
+#define NCI_GID_PROPRIETARY					0xf
 
 /* ---- NCI Packet structures ---- */
 #define NCI_CTRL_HDR_SIZE					3
@@ -169,18 +190,11 @@ struct nci_data_hdr {
 /* -----  NCI Commands ---- */
 /* ------------------------ */
 #define NCI_OP_CORE_RESET_CMD		nci_opcode_pack(NCI_GID_CORE, 0x00)
-
-#define NCI_OP_CORE_INIT_CMD		nci_opcode_pack(NCI_GID_CORE, 0x01)
-
-#define NCI_OP_CORE_SET_CONFIG_CMD	nci_opcode_pack(NCI_GID_CORE, 0x02)
-
-#define NCI_OP_CORE_CONN_CREATE_CMD	nci_opcode_pack(NCI_GID_CORE, 0x04)
-struct nci_core_conn_create_cmd {
-	__u8	target_handle;
-	__u8	num_target_specific_params;
+struct nci_core_reset_cmd {
+	__u8	reset_type;
 } __packed;
 
-#define NCI_OP_CORE_CONN_CLOSE_CMD	nci_opcode_pack(NCI_GID_CORE, 0x06)
+#define NCI_OP_CORE_INIT_CMD		nci_opcode_pack(NCI_GID_CORE, 0x01)
 
 #define NCI_OP_RF_DISCOVER_MAP_CMD	nci_opcode_pack(NCI_GID_RF_MGMT, 0x00)
 struct disc_map_config {
@@ -218,6 +232,7 @@ struct nci_rf_deactivate_cmd {
 struct nci_core_reset_rsp {
 	__u8	status;
 	__u8	nci_ver;
+	__u8	config_status;
 } __packed;
 
 #define NCI_OP_CORE_INIT_RSP		nci_opcode_pack(NCI_GID_CORE, 0x01)
@@ -232,24 +247,14 @@ struct nci_core_init_rsp_1 {
 struct nci_core_init_rsp_2 {
 	__u8	max_logical_connections;
 	__le16	max_routing_table_size;
-	__u8	max_control_packet_payload_length;
-	__le16	rf_sending_buffer_size;
-	__le16	rf_receiving_buffer_size;
-	__le16	manufacturer_id;
-} __packed;
-
-#define NCI_OP_CORE_SET_CONFIG_RSP	nci_opcode_pack(NCI_GID_CORE, 0x02)
-
-#define NCI_OP_CORE_CONN_CREATE_RSP	nci_opcode_pack(NCI_GID_CORE, 0x04)
-struct nci_core_conn_create_rsp {
-	__u8	status;
-	__u8	max_pkt_payload_size;
+	__u8	max_ctrl_pkt_payload_len;
+	__le16	max_size_for_large_params;
+	__u8	max_data_pkt_payload_size;
 	__u8	initial_num_credits;
-	__u8	conn_id;
+	__u8	manufact_id;
+	__le32	manufact_specific_info;
 } __packed;
 
-#define NCI_OP_CORE_CONN_CLOSE_RSP	nci_opcode_pack(NCI_GID_CORE, 0x06)
-
 #define NCI_OP_RF_DISCOVER_MAP_RSP	nci_opcode_pack(NCI_GID_RF_MGMT, 0x00)
 
 #define NCI_OP_RF_DISCOVER_RSP		nci_opcode_pack(NCI_GID_RF_MGMT, 0x03)
@@ -270,12 +275,7 @@ struct nci_core_conn_credit_ntf {
 	struct conn_credit_entry	conn_entries[NCI_MAX_NUM_CONN];
 } __packed;
 
-#define NCI_OP_RF_FIELD_INFO_NTF	nci_opcode_pack(NCI_GID_CORE, 0x08)
-struct nci_rf_field_info_ntf {
-	__u8	rf_field_status;
-} __packed;
-
-#define NCI_OP_RF_ACTIVATE_NTF		nci_opcode_pack(NCI_GID_RF_MGMT, 0x05)
+#define NCI_OP_RF_INTF_ACTIVATED_NTF	nci_opcode_pack(NCI_GID_RF_MGMT, 0x05)
 struct rf_tech_specific_params_nfca_poll {
 	__u16	sens_res;
 	__u8	nfcid1_len;	/* 0, 4, 7, or 10 Bytes */
@@ -289,17 +289,20 @@ struct activation_params_nfca_poll_iso_dep {
 	__u8	rats_res[20];
 };
 
-struct nci_rf_activate_ntf {
-	__u8	target_handle;
+struct nci_rf_intf_activated_ntf {
+	__u8	rf_discovery_id;
+	__u8	rf_interface_type;
 	__u8	rf_protocol;
-	__u8	rf_tech_and_mode;
+	__u8	activation_rf_tech_and_mode;
 	__u8	rf_tech_specific_params_len;
 
 	union {
 		struct rf_tech_specific_params_nfca_poll nfca_poll;
 	} rf_tech_specific_params;
 
-	__u8	rf_interface_type;
+	__u8	data_exch_rf_tech_and_mode;
+	__u8	data_exch_tx_bit_rate;
+	__u8	data_exch_rx_bit_rate;
 	__u8	activation_params_len;
 
 	union {
@@ -309,5 +312,9 @@ struct nci_rf_activate_ntf {
 } __packed;
 
 #define NCI_OP_RF_DEACTIVATE_NTF	nci_opcode_pack(NCI_GID_RF_MGMT, 0x06)
+struct nci_rf_deactivate_ntf {
+	__u8	type;
+	__u8	reason;
+} __packed;
 
 #endif /* __NCI_H */
diff --git a/include/net/nfc/nci_core.h b/include/net/nfc/nci_core.h
index b8b4bbd7e0fc..c92b69d7e0c2 100644
--- a/include/net/nfc/nci_core.h
+++ b/include/net/nfc/nci_core.h
@@ -109,15 +109,12 @@ struct nci_dev {
 				[NCI_MAX_SUPPORTED_RF_INTERFACES];
 	__u8			max_logical_connections;
 	__u16			max_routing_table_size;
-	__u8			max_control_packet_payload_length;
-	__u16			rf_sending_buffer_size;
-	__u16			rf_receiving_buffer_size;
-	__u16			manufacturer_id;
-
-	/* received during NCI_OP_CORE_CONN_CREATE_RSP for static conn 0 */
-	__u8			max_pkt_payload_size;
+	__u8			max_ctrl_pkt_payload_len;
+	__u16			max_size_for_large_params;
+	__u8			max_data_pkt_payload_size;
 	__u8			initial_num_credits;
-	__u8			conn_id;
+	__u8			manufact_id;
+	__u32			manufact_specific_info;
 
 	/* stored during nci_data_exchange */
 	data_exchange_cb_t	data_exchange_cb;