Merge "cfg80211: Define macro for report better BSS in sched scan"

2 files changed, 123 insertions, 0 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 294344b3f0f0..e5930177c96a 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -70,6 +70,7 @@ struct wiphy;
 #define CFG80211_UPDATE_CONNECT_PARAMS 1
 #define CFG80211_BEACON_TX_RATE_CUSTOM_BACKPORT 1
 #define CFG80211_RAND_TA_FOR_PUBLIC_ACTION_FRAME 1
+#define CFG80211_REPORT_BETTER_BSS_IN_SCHED_SCAN 1
 
 /*
  * wireless hardware capability structures
@@ -1569,6 +1570,17 @@ struct cfg80211_sched_scan_plan {
 };
 
 /**
+ * struct cfg80211_bss_select_adjust - BSS selection with RSSI adjustment.
+ *
+ * @band: band of BSS which should match for RSSI level adjustment.
+ * @delta: value of RSSI level adjustment.
+ */
+struct cfg80211_bss_select_adjust {
+	enum nl80211_band band;
+	s8 delta;
+};
+
+/**
  * struct cfg80211_sched_scan_request - scheduled scan request description
  *
  * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
@@ -1603,6 +1615,16 @@ struct cfg80211_sched_scan_plan {
  *	cycle.  The driver may ignore this parameter and start
  *	immediately (or at any other time), if this feature is not
  *	supported.
+ * @relative_rssi_set: Indicates whether @relative_rssi is set or not.
+ * @relative_rssi: Relative RSSI threshold in dB to restrict scan result
+ *	reporting in connected state to cases where a matching BSS is determined
+ *	to have better or slightly worse RSSI than the current connected BSS.
+ *	The relative RSSI threshold values are ignored in disconnected state.
+ * @rssi_adjust: delta dB of RSSI preference to be given to the BSSs that belong
+ *	to the specified band while deciding whether a better BSS is reported
+ *	using @relative_rssi. If delta is a negative number, the BSSs that
+ *	belong to the specified band will be penalized by delta dB in relative
+ *	comparisions.
  */
 struct cfg80211_sched_scan_request {
 	struct cfg80211_ssid *ssids;
@@ -1622,6 +1644,10 @@ struct cfg80211_sched_scan_request {
 	u8 mac_addr[ETH_ALEN] __aligned(2);
 	u8 mac_addr_mask[ETH_ALEN] __aligned(2);
 
+	bool relative_rssi_set;
+	s8 relative_rssi;
+	struct cfg80211_bss_select_adjust rssi_adjust;
+
 	/* internal */
 	struct wiphy *wiphy;
 	struct net_device *dev;
@@ -1907,6 +1933,22 @@ struct cfg80211_ibss_params {
 };
 
 /**
+ * struct cfg80211_bss_selection - connection parameters for BSS selection.
+ *
+ * @behaviour: requested BSS selection behaviour.
+ * @param: parameters for requestion behaviour.
+ * @band_pref: preferred band for %NL80211_BSS_SELECT_ATTR_BAND_PREF.
+ * @adjust: parameters for %NL80211_BSS_SELECT_ATTR_RSSI_ADJUST.
+ */
+struct cfg80211_bss_selection {
+	enum nl80211_bss_select_attr behaviour;
+	union {
+		enum ieee80211_band band_pref;
+		struct cfg80211_bss_select_adjust adjust;
+	} param;
+};
+
+/**
  * struct cfg80211_connect_params - Connection parameters
  *
  * This structure provides information needed to complete IEEE 802.11
@@ -1943,6 +1985,7 @@ struct cfg80211_ibss_params {
  * @vht_capa_mask: The bits of vht_capa which are to be used.
  * @pbss: if set, connect to a PCP instead of AP. Valid for DMG
  *	networks.
+ * @bss_select: criteria to be used for BSS selection.
  * @prev_bssid: previous BSSID, if not %NULL use reassociate frame
  */
 struct cfg80211_connect_params {
@@ -1967,6 +2010,7 @@ struct cfg80211_connect_params {
 	struct ieee80211_vht_cap vht_capa;
 	struct ieee80211_vht_cap vht_capa_mask;
 	bool pbss;
+	struct cfg80211_bss_selection bss_select;
 	const u8 *prev_bssid;
 };
 
@@ -3284,6 +3328,9 @@ struct wiphy_iftype_ext_capab {
  *	low rssi when a frame is heard on different channel, then it should set
  *	this variable to the maximal offset for which it can compensate.
  *	This value should be set in MHz.
+ * @bss_select_support: bitmask indicating the BSS selection criteria supported
+ *	by the driver in the .connect() callback. The bit position maps to the
+ *	attribute indices defined in &enum nl80211_bss_select_attr.
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -3411,6 +3458,8 @@ struct wiphy {
 	u8 max_num_csa_counters;
 	u8 max_adj_channel_rssi_comp;
 
+	u32 bss_select_support;
+
 	char priv[0] __aligned(NETDEV_ALIGN);
 };
 
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 335b331cbf4f..0505b1f9872b 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1934,6 +1934,20 @@ enum nl80211_commands {
  * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also
  *	used in various commands/events for specifying the BSSID.
  *
+ * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which
+ *	other BSSs has to be better or slightly worse than the current
+ *	connected BSS so that they get reported to user space.
+ *	This will give an opportunity to userspace to consider connecting to
+ *	other matching BSSs which have better or slightly worse RSSI than
+ *	the current connected BSS by using an offloaded operation to avoid
+ *	unnecessary wakeups.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in
+ *	the specified band is to be adjusted before doing
+ *	%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparision to figure out
+ *	better BSSs. The attribute value is a packed structure
+ *	value as specified by &struct nl80211_bss_select_rssi_adjust.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2340,6 +2354,9 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_BSSID,
 
+	NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
+	NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3008,6 +3025,13 @@ enum nl80211_reg_rule_attr {
  *	how this API was implemented in the past. Also, due to the same problem,
  *	the only way to create a matchset with only an RSSI filter (with this
  *	attribute) is if there's only a single matchset with the RSSI attribute.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether
+ *	%NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or
+ *	relative to current bss's RSSI.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for
+ *	BSS-es in the specified band is to be adjusted before doing
+ *	RSSI-based BSS selection. The attribute value is a packed structure
+ *	value as specified by &struct nl80211_bss_select_rssi_adjust.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
  *	attribute number currently defined
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -3017,6 +3041,8 @@ enum nl80211_sched_scan_match_attr {
 
 	NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
 	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
+	NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
+	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
 
 	/* keep last */
 	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -4609,6 +4635,9 @@ enum nl80211_feature_flags {
  *	in @NL80211_CMD_FRAME while not associated.
  * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports
  *	randomized TA in @NL80211_CMD_FRAME while associated.
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan
+ *	for reporting BSSs with better RSSI than the current connected BSS
+ *	(%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI).
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4626,6 +4655,7 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_FILS_STA,
 	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,
 	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
+	NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -4875,4 +4905,48 @@ enum nl80211_sched_scan_plan {
 		__NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
 };
 
+/**
+ * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.
+ *
+ * @band: band of BSS that must match for RSSI value adjustment.
+ * @delta: value used to adjust the RSSI value of matching BSS.
+ */
+struct nl80211_bss_select_rssi_adjust {
+	__u8 band;
+	__s8 delta;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_bss_select_attr - attributes for bss selection.
+ *
+ * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved.
+ * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection
+ *	is requested.
+ * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS
+ *	selection should be done such that the specified band is preferred.
+ *	When there are multiple BSS-es in the preferred band, the driver
+ *	shall use RSSI-based BSS selection as a second step. The value of
+ *	this attribute is according to &enum nl80211_band (u32).
+ * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for
+ *	BSS-es in the specified band is to be adjusted before doing
+ *	RSSI-based BSS selection. The attribute value is a packed structure
+ *	value as specified by &struct nl80211_bss_select_rssi_adjust.
+ * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.
+ * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use.
+ *
+ * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT
+ * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour
+ * which the driver shall use.
+ */
+enum nl80211_bss_select_attr {
+	__NL80211_BSS_SELECT_ATTR_INVALID,
+	NL80211_BSS_SELECT_ATTR_RSSI,
+	NL80211_BSS_SELECT_ATTR_BAND_PREF,
+	NL80211_BSS_SELECT_ATTR_RSSI_ADJUST,
+
+	/* keep last */
+	__NL80211_BSS_SELECT_ATTR_AFTER_LAST,
+	NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1
+};
+
 #endif /* __LINUX_NL80211_H */