Merge mac80211-next into ath-next

Patch "ath10k: introduce basic tdls functionality" depends on this mac80211
patch:

c23e31cf7b55 mac80211: initialize rate control earlier for tdls station

4 files changed, 147 insertions, 14 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 64e09e1e8099..12a6121ea76e 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -215,6 +215,39 @@ enum ieee80211_rate_flags {
 };
 
 /**
+ * enum ieee80211_bss_type - BSS type filter
+ *
+ * @IEEE80211_BSS_TYPE_ESS: Infrastructure BSS
+ * @IEEE80211_BSS_TYPE_PBSS: Personal BSS
+ * @IEEE80211_BSS_TYPE_IBSS: Independent BSS
+ * @IEEE80211_BSS_TYPE_MBSS: Mesh BSS
+ * @IEEE80211_BSS_TYPE_ANY: Wildcard value for matching any BSS type
+ */
+enum ieee80211_bss_type {
+	IEEE80211_BSS_TYPE_ESS,
+	IEEE80211_BSS_TYPE_PBSS,
+	IEEE80211_BSS_TYPE_IBSS,
+	IEEE80211_BSS_TYPE_MBSS,
+	IEEE80211_BSS_TYPE_ANY
+};
+
+/**
+ * enum ieee80211_privacy - BSS privacy filter
+ *
+ * @IEEE80211_PRIVACY_ON: privacy bit set
+ * @IEEE80211_PRIVACY_OFF: privacy bit clear
+ * @IEEE80211_PRIVACY_ANY: Wildcard value for matching any privacy setting
+ */
+enum ieee80211_privacy {
+	IEEE80211_PRIVACY_ON,
+	IEEE80211_PRIVACY_OFF,
+	IEEE80211_PRIVACY_ANY
+};
+
+#define IEEE80211_PRIVACY(x)	\
+	((x) ? IEEE80211_PRIVACY_ON : IEEE80211_PRIVACY_OFF)
+
+/**
  * struct ieee80211_rate - bitrate definition
  *
  * This structure describes a bitrate that an 802.11 PHY can
@@ -4012,14 +4045,16 @@ struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
 				      struct ieee80211_channel *channel,
 				      const u8 *bssid,
 				      const u8 *ssid, size_t ssid_len,
-				      u16 capa_mask, u16 capa_val);
+				      enum ieee80211_bss_type bss_type,
+				      enum ieee80211_privacy);
 static inline struct cfg80211_bss *
 cfg80211_get_ibss(struct wiphy *wiphy,
 		  struct ieee80211_channel *channel,
 		  const u8 *ssid, size_t ssid_len)
 {
 	return cfg80211_get_bss(wiphy, channel, NULL, ssid, ssid_len,
-				WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS);
+				IEEE80211_BSS_TYPE_IBSS,
+				IEEE80211_PRIVACY_ANY);
 }
 
 /**
@@ -4260,6 +4295,7 @@ struct sk_buff *__cfg80211_alloc_reply_skb(struct wiphy *wiphy,
 					   int approxlen);
 
 struct sk_buff *__cfg80211_alloc_event_skb(struct wiphy *wiphy,
+					   struct wireless_dev *wdev,
 					   enum nl80211_commands cmd,
 					   enum nl80211_attrs attr,
 					   int vendor_event_idx,
@@ -4314,6 +4350,7 @@ int cfg80211_vendor_cmd_reply(struct sk_buff *skb);
 /**
  * cfg80211_vendor_event_alloc - allocate vendor-specific event skb
  * @wiphy: the wiphy
+ * @wdev: the wireless device
  * @event_idx: index of the vendor event in the wiphy's vendor_events
  * @approxlen: an upper bound of the length of the data that will
  *	be put into the skb
@@ -4322,16 +4359,20 @@ int cfg80211_vendor_cmd_reply(struct sk_buff *skb);
  * This function allocates and pre-fills an skb for an event on the
  * vendor-specific multicast group.
  *
+ * If wdev != NULL, both the ifindex and identifier of the specified
+ * wireless device are added to the event message before the vendor data
+ * attribute.
+ *
  * When done filling the skb, call cfg80211_vendor_event() with the
  * skb to send the event.
  *
  * Return: An allocated and pre-filled skb. %NULL if any errors happen.
  */
 static inline struct sk_buff *
-cfg80211_vendor_event_alloc(struct wiphy *wiphy, int approxlen,
-			    int event_idx, gfp_t gfp)
+cfg80211_vendor_event_alloc(struct wiphy *wiphy, struct wireless_dev *wdev,
+			     int approxlen, int event_idx, gfp_t gfp)
 {
-	return __cfg80211_alloc_event_skb(wiphy, NL80211_CMD_VENDOR,
+	return __cfg80211_alloc_event_skb(wiphy, wdev, NL80211_CMD_VENDOR,
 					  NL80211_ATTR_VENDOR_DATA,
 					  event_idx, approxlen, gfp);
 }
@@ -4432,7 +4473,7 @@ static inline int cfg80211_testmode_reply(struct sk_buff *skb)
 static inline struct sk_buff *
 cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy, int approxlen, gfp_t gfp)
 {
-	return __cfg80211_alloc_event_skb(wiphy, NL80211_CMD_TESTMODE,
+	return __cfg80211_alloc_event_skb(wiphy, NULL, NL80211_CMD_TESTMODE,
 					  NL80211_ATTR_TESTDATA, -1,
 					  approxlen, gfp);
 }
diff --git a/include/net/iw_handler.h b/include/net/iw_handler.h
index a830b01baba4..8f81bbbc38fc 100644
--- a/include/net/iw_handler.h
+++ b/include/net/iw_handler.h
@@ -519,6 +519,17 @@ iwe_stream_add_event(struct iw_request_info *info, char *stream, char *ends,
 	return stream;
 }
 
+static inline char *
+iwe_stream_add_event_check(struct iw_request_info *info, char *stream,
+			   char *ends, struct iw_event *iwe, int event_len)
+{
+	char *res = iwe_stream_add_event(info, stream, ends, iwe, event_len);
+
+	if (res == stream)
+		return ERR_PTR(-E2BIG);
+	return res;
+}
+
 /*------------------------------------------------------------------*/
 /*
  * Wrapper to add an short Wireless Event containing a pointer to a
@@ -545,6 +556,17 @@ iwe_stream_add_point(struct iw_request_info *info, char *stream, char *ends,
 	return stream;
 }
 
+static inline char *
+iwe_stream_add_point_check(struct iw_request_info *info, char *stream,
+			   char *ends, struct iw_event *iwe, char *extra)
+{
+	char *res = iwe_stream_add_point(info, stream, ends, iwe, extra);
+
+	if (res == stream)
+		return ERR_PTR(-E2BIG);
+	return res;
+}
+
 /*------------------------------------------------------------------*/
 /*
  * Wrapper to add a value to a Wireless Event in a stream of events.
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index d52914b75331..157c0f151766 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -337,12 +337,15 @@ enum ieee80211_rssi_event {
  *	HW flag %IEEE80211_HW_TIMING_BEACON_ONLY is set, then this can
  *	only come from a beacon, but might not become valid until after
  *	association when a beacon is received (which is notified with the
- *	%BSS_CHANGED_DTIM flag.)
+ *	%BSS_CHANGED_DTIM flag.). See also sync_dtim_count important notice.
  * @sync_device_ts: the device timestamp corresponding to the sync_tsf,
  *	the driver/device can use this to calculate synchronisation
- *	(see @sync_tsf)
+ *	(see @sync_tsf). See also sync_dtim_count important notice.
  * @sync_dtim_count: Only valid when %IEEE80211_HW_TIMING_BEACON_ONLY
  *	is requested, see @sync_tsf/@sync_device_ts.
+ *	IMPORTANT: These three sync_* parameters would possibly be out of sync
+ *	by the time the driver will use them. The synchronized view is currently
+ *	guaranteed only in certain callbacks.
  * @beacon_int: beacon interval
  * @assoc_capability: capabilities taken from assoc resp
  * @basic_rates: bitmap of basic rates, each bit stands for an
@@ -1279,6 +1282,19 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
 struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev);
 
 /**
+ * ieee80211_vif_to_wdev - return a wdev struct from a vif
+ * @vif: the vif to get the wdev for
+ *
+ * This can be used by mac80211 drivers with direct cfg80211 APIs
+ * (like the vendor commands) that needs to get the wdev for a vif.
+ *
+ * Note that this function may return %NULL if the given wdev isn't
+ * associated with a vif that the driver knows about (e.g. monitor
+ * or AP_VLAN interfaces.)
+ */
+struct wireless_dev *ieee80211_vif_to_wdev(struct ieee80211_vif *vif);
+
+/**
  * enum ieee80211_key_flags - key flags
  *
  * These flags are used for communication about keys between the driver
@@ -1488,6 +1504,7 @@ struct ieee80211_sta_rates {
  * @tdls: indicates whether the STA is a TDLS peer
  * @tdls_initiator: indicates the STA is an initiator of the TDLS link. Only
  *	valid if the STA is a TDLS peer in the first place.
+ * @mfp: indicates whether the STA uses management frame protection or not.
  */
 struct ieee80211_sta {
 	u32 supp_rates[IEEE80211_NUM_BANDS];
@@ -1504,6 +1521,7 @@ struct ieee80211_sta {
 	struct ieee80211_sta_rates __rcu *rates;
 	bool tdls;
 	bool tdls_initiator;
+	bool mfp;
 
 	/* must be last */
 	u8 drv_priv[0] __aligned(sizeof(void *));
@@ -4343,13 +4361,33 @@ void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw);
  *	haven't been re-added to the driver yet.
  * @IEEE80211_IFACE_ITER_RESUME_ALL: During resume, iterate over all
  *	interfaces, even if they haven't been re-added to the driver yet.
+ * @IEEE80211_IFACE_ITER_ACTIVE: Iterate only active interfaces (netdev is up).
  */
 enum ieee80211_interface_iteration_flags {
 	IEEE80211_IFACE_ITER_NORMAL	= 0,
 	IEEE80211_IFACE_ITER_RESUME_ALL	= BIT(0),
+	IEEE80211_IFACE_ITER_ACTIVE	= BIT(1),
 };
 
 /**
+ * ieee80211_iterate_interfaces - iterate interfaces
+ *
+ * This function iterates over the interfaces associated with a given
+ * hardware and calls the callback for them. This includes active as well as
+ * inactive interfaces. This function allows the iterator function to sleep.
+ * Will iterate over a new interface during add_interface().
+ *
+ * @hw: the hardware struct of which the interfaces should be iterated over
+ * @iter_flags: iteration flags, see &enum ieee80211_interface_iteration_flags
+ * @iterator: the iterator function to call
+ * @data: first argument of the iterator function
+ */
+void ieee80211_iterate_interfaces(struct ieee80211_hw *hw, u32 iter_flags,
+				  void (*iterator)(void *data, u8 *mac,
+						   struct ieee80211_vif *vif),
+				  void *data);
+
+/**
  * ieee80211_iterate_active_interfaces - iterate active interfaces
  *
  * This function iterates over the interfaces associated with a given
@@ -4364,11 +4402,16 @@ enum ieee80211_interface_iteration_flags {
  * @iterator: the iterator function to call
  * @data: first argument of the iterator function
  */
-void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw,
-					 u32 iter_flags,
-					 void (*iterator)(void *data, u8 *mac,
-						struct ieee80211_vif *vif),
-					 void *data);
+static inline void
+ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw, u32 iter_flags,
+				    void (*iterator)(void *data, u8 *mac,
+						     struct ieee80211_vif *vif),
+				    void *data)
+{
+	ieee80211_iterate_interfaces(hw,
+				     iter_flags | IEEE80211_IFACE_ITER_ACTIVE,
+				     iterator, data);
+}
 
 /**
  * ieee80211_iterate_active_interfaces_atomic - iterate active interfaces
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 68b294e83944..ae16ba9cb1e3 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -25,6 +25,19 @@
  *
  */
 
+/*
+ * This header file defines the userspace API to the wireless stack. Please
+ * be careful not to break things - i.e. don't move anything around or so
+ * unless you can demonstrate that it breaks neither API nor ABI.
+ *
+ * Additions to the API should be accompanied by actual implementations in
+ * an upstream driver, so that example implementations exist in case there
+ * are ever concerns about the precise semantics of the API or changes are
+ * needed, and to ensure that code for dead (no longer implemented) API
+ * can actually be identified and removed.
+ * Nonetheless, semantics should also be documented carefully in this file.
+ */
+
 #include <linux/types.h>
 
 #define NL80211_GENL_NAME "nl80211"
@@ -1684,6 +1697,10 @@ enum nl80211_commands {
  *	If set during scheduled scan start then the new scan req will be
  *	owned by the netlink socket that created it and the scheduled scan will
  *	be stopped when the socket is closed.
+ *	If set during configuration of regulatory indoor operation then the
+ *	regulatory indoor configuration would be owned by the netlink socket
+ *	that configured the indoor setting, and the indoor operation would be
+ *	cleared when the socket is closed.
  *
  * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
  *	the TDLS link initiator.
@@ -1739,6 +1756,9 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before a scheduled scan (or a
  *	WoWLAN net-detect scan) is started, u32 in seconds.
+
+ * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
+ *      is operating in an indoor environment.
  *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2107,6 +2127,8 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_SCHED_SCAN_DELAY,
 
+	NL80211_ATTR_REG_INDOOR,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3092,7 +3114,8 @@ enum nl80211_mesh_power_mode {
  *
  * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
  *	established peering with for longer than this time (in seconds), then
- *	remove it from the STA's list of peers.  Default is 30 minutes.
+ *	remove it from the STA's list of peers. You may set this to 0 to disable
+ *	the removal of the STA. Default is 30 minutes.
  *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
@@ -3694,6 +3717,8 @@ struct nl80211_pattern_support {
  * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
  *	the chip into a special state -- works best with chips that have
  *	support for low-power operation already (flag)
+ *	Note that this mode is incompatible with all of the others, if
+ *	any others are even supported by the device.
  * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
  *	is detected is implementation-specific (flag)
  * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
@@ -4327,11 +4352,13 @@ enum nl80211_feature_flags {
 
 /**
  * enum nl80211_ext_feature_index - bit index of extended features.
+ * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
 enum nl80211_ext_feature_index {
+	NL80211_EXT_FEATURE_VHT_IBSS,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,