phy: relocate and rename phy ufs files

This change contains:
1. Relocating the phy ufs files to reside under the phy driver since
this is the location of any file that implements the APIs presented in
the generic phy framework
2. Renaming ufs-msm-phy*.* files to be phy-qcom-ufs*.* files.
Since UFS is not used strictly in a specific set of targets but rather
its code is applicable to MSM, APQ, IPQ etc, any mentioning of "msm" in
the file name should be changed to "qcom".
Also, prefix of "phy-" is the naming convention of platform driver files
that reside in the phy driver.
3. As a result of the relocation of files into the phy driver,
a new path is created (include/linux/scsi/ufs) and there we expose ufs
header files that are being used also from the drivers/scsi/ufs
and from drivers/phy as well.

Change-Id: Ie5cb47718911ff711d9401a389f56fa508fcddf3
Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
[gbroner@codeaurora.org: fix merge conflicts]
Signed-off-by: Gilad Broner <gbroner@codeaurora.org>
[venkatg@codeaurora.org: resolved merge conflicts by keeping
upstream version]
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>

5 files changed, 1736 insertions, 2 deletions

diff --git a/include/linux/phy/phy-qcom-ufs.h b/include/linux/phy/phy-qcom-ufs.h
index 9d18e9f948e9..689bd2491d2b 100644
--- a/include/linux/phy/phy-qcom-ufs.h
+++ b/include/linux/phy/phy-qcom-ufs.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ * Copyright (c) 2013-2014, Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -15,7 +15,9 @@
 #ifndef PHY_QCOM_UFS_H_
 #define PHY_QCOM_UFS_H_
 
-#include "phy.h"
+#include <linux/scsi/ufs/ufshcd.h>
+#include <linux/scsi/ufs/unipro.h>
+#include <linux/scsi/ufs/ufs-qcom.h>
 
 /**
  * ufs_qcom_phy_enable_ref_clk() - Enable the phy
diff --git a/include/linux/scsi/ufs/ufs-qcom.h b/include/linux/scsi/ufs/ufs-qcom.h
new file mode 100644
index 000000000000..2bcb1edd53fa
--- /dev/null
+++ b/include/linux/scsi/ufs/ufs-qcom.h
@@ -0,0 +1,148 @@
+/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_QCOM_H_
+#define UFS_QCOM_H_
+
+#include <linux/phy/phy.h>
+
+#define MAX_U32                 (~(u32)0)
+#define MPHY_TX_FSM_STATE       0x41
+#define TX_FSM_HIBERN8          0x1
+#define HBRN8_POLL_TOUT_MS      100
+#define DEFAULT_CLK_RATE_HZ     1000000
+#define BUS_VECTOR_NAME_LEN     32
+
+#define UFS_HW_VER_MAJOR_SHFT	(28)
+#define UFS_HW_VER_MAJOR_MASK	(0x000F << UFS_HW_VER_MAJOR_SHFT)
+#define UFS_HW_VER_MINOR_SHFT	(16)
+#define UFS_HW_VER_MINOR_MASK	(0x0FFF << UFS_HW_VER_MINOR_SHFT)
+#define UFS_HW_VER_STEP_SHFT	(0)
+#define UFS_HW_VER_STEP_MASK	(0xFFFF << UFS_HW_VER_STEP_SHFT)
+
+/* vendor specific pre-defined parameters */
+#define SLOW 1
+#define FAST 2
+
+#define UFS_QCOM_LIMIT_NUM_LANES_RX	2
+#define UFS_QCOM_LIMIT_NUM_LANES_TX	2
+#define UFS_QCOM_LIMIT_HSGEAR_RX	UFS_HS_G2
+#define UFS_QCOM_LIMIT_HSGEAR_TX	UFS_HS_G2
+#define UFS_QCOM_LIMIT_PWMGEAR_RX	UFS_PWM_G4
+#define UFS_QCOM_LIMIT_PWMGEAR_TX	UFS_PWM_G4
+#define UFS_QCOM_LIMIT_RX_PWR_PWM	SLOW_MODE
+#define UFS_QCOM_LIMIT_TX_PWR_PWM	SLOW_MODE
+#define UFS_QCOM_LIMIT_RX_PWR_HS	FAST_MODE
+#define UFS_QCOM_LIMIT_TX_PWR_HS	FAST_MODE
+#define UFS_QCOM_LIMIT_HS_RATE		PA_HS_MODE_A
+#define UFS_QCOM_LIMIT_DESIRED_MODE	FAST
+
+/* QCOM UFS host controller vendor specific registers */
+enum {
+	REG_UFS_SYS1CLK_1US                 = 0xC0,
+	REG_UFS_TX_SYMBOL_CLK_NS_US         = 0xC4,
+	REG_UFS_LOCAL_PORT_ID_REG           = 0xC8,
+	REG_UFS_PA_ERR_CODE                 = 0xCC,
+	REG_UFS_RETRY_TIMER_REG             = 0xD0,
+	REG_UFS_PA_LINK_STARTUP_TIMER       = 0xD8,
+	REG_UFS_CFG1                        = 0xDC,
+	REG_UFS_CFG2                        = 0xE0,
+	REG_UFS_HW_VERSION                  = 0xE4,
+};
+
+/* bit offset */
+enum {
+	OFFSET_UFS_PHY_SOFT_RESET           = 1,
+	OFFSET_CLK_NS_REG                   = 10,
+};
+
+/* bit masks */
+enum {
+	MASK_UFS_PHY_SOFT_RESET             = 0x2,
+	MASK_TX_SYMBOL_CLK_1US_REG          = 0x3FF,
+	MASK_CLK_NS_REG                     = 0xFFFC00,
+};
+
+enum ufs_qcom_phy_init_type {
+	UFS_PHY_INIT_FULL,
+	UFS_PHY_INIT_CFG_RESTORE,
+};
+
+struct ufs_qcom_phy_vreg {
+	const char *name;
+	struct regulator *reg;
+	int max_uA;
+	int min_uV;
+	int max_uV;
+	bool enabled;
+};
+
+static inline void
+ufs_qcom_get_controller_revision(struct ufs_hba *hba,
+				 u8 *major, u16 *minor, u16 *step)
+{
+	u32 ver = ufshcd_readl(hba, REG_UFS_HW_VERSION);
+
+	*major = (ver & UFS_HW_VER_MAJOR_MASK) >> UFS_HW_VER_MAJOR_SHFT;
+	*minor = (ver & UFS_HW_VER_MINOR_MASK) >> UFS_HW_VER_MINOR_SHFT;
+	*step = (ver & UFS_HW_VER_STEP_MASK) >> UFS_HW_VER_STEP_SHFT;
+};
+
+static inline void ufs_qcom_assert_reset(struct ufs_hba *hba)
+{
+	ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET,
+			1 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1);
+	mb();
+}
+
+static inline void ufs_qcom_deassert_reset(struct ufs_hba *hba)
+{
+	ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET,
+			0 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1);
+	mb();
+}
+
+struct ufs_qcom_bus_vote {
+	uint32_t client_handle;
+	uint32_t curr_vote;
+	int min_bw_vote;
+	int max_bw_vote;
+	int saved_vote;
+	bool is_max_bw_needed;
+	struct device_attribute max_bus_bw;
+};
+
+struct ufs_qcom_host {
+	struct phy *generic_phy;
+	struct ufs_hba *hba;
+	struct ufs_qcom_bus_vote bus_vote;
+	struct ufs_pa_layer_attr dev_req_params;
+	struct clk *rx_l0_sync_clk;
+	struct clk *tx_l0_sync_clk;
+	struct clk *rx_l1_sync_clk;
+	struct clk *tx_l1_sync_clk;
+	bool is_lane_clks_enabled;
+	bool sec_cfg_updated;
+};
+
+#define ufs_qcom_is_link_off(hba) ufshcd_is_link_off(hba)
+#define ufs_qcom_is_link_active(hba) ufshcd_is_link_active(hba)
+#define ufs_qcom_is_link_hibern8(hba) ufshcd_is_link_hibern8(hba)
+
+#define MAX_PROP_NAME              32
+#define VDDA_PHY_MIN_UV            1000000
+#define VDDA_PHY_MAX_UV            1000000
+#define VDDA_PLL_MIN_UV            1800000
+#define VDDA_PLL_MAX_UV            1800000
+
+#endif /* UFS_QCOM_H_ */
diff --git a/include/linux/scsi/ufs/ufs.h b/include/linux/scsi/ufs/ufs.h
new file mode 100644
index 000000000000..d8b2a13f2053
--- /dev/null
+++ b/include/linux/scsi/ufs/ufs.h
@@ -0,0 +1,492 @@
+/*
+ * Universal Flash Storage Host controller driver
+ *
+ * This code is based on drivers/scsi/ufs/ufs.h
+ * Copyright (C) 2011-2013 Samsung India Software Operations
+ *
+ * Authors:
+ *	Santosh Yaraganavi <santosh.sy@samsung.com>
+ *	Vinayak Holikatti <h.vinayak@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * See the COPYING file in the top-level directory or visit
+ * <http://www.gnu.org/licenses/gpl-2.0.html>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This program is provided "AS IS" and "WITH ALL FAULTS" and
+ * without warranty of any kind. You are solely responsible for
+ * determining the appropriateness of using and distributing
+ * the program and assume all risks associated with your exercise
+ * of rights with respect to the program, including but not limited
+ * to infringement of third party rights, the risks and costs of
+ * program errors, damage to or loss of data, programs or equipment,
+ * and unavailability or interruption of operations. Under no
+ * circumstances will the contributor of this Program be liable for
+ * any damages of any kind arising from your use or distribution of
+ * this program.
+ */
+
+#ifndef _UFS_H
+#define _UFS_H
+
+#include <linux/mutex.h>
+#include <linux/types.h>
+#include <scsi/ufs/ufs.h>
+
+#define MAX_CDB_SIZE	16
+#define GENERAL_UPIU_REQUEST_SIZE 32
+#define QUERY_DESC_MAX_SIZE       255
+#define QUERY_DESC_MIN_SIZE       2
+#define QUERY_DESC_HDR_SIZE       2
+#define QUERY_OSF_SIZE            (GENERAL_UPIU_REQUEST_SIZE - \
+					(sizeof(struct utp_upiu_header)))
+#define RESPONSE_UPIU_SENSE_DATA_LENGTH	18
+
+#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
+			cpu_to_be32((byte3 << 24) | (byte2 << 16) |\
+			 (byte1 << 8) | (byte0))
+/*
+ * UFS device may have standard LUs and LUN id could be from 0x00 to
+ * 0x7F. Standard LUs use "Peripheral Device Addressing Format".
+ * UFS device may also have the Well Known LUs (also referred as W-LU)
+ * which again could be from 0x00 to 0x7F. For W-LUs, device only use
+ * the "Extended Addressing Format" which means the W-LUNs would be
+ * from 0xc100 (SCSI_W_LUN_BASE) onwards.
+ * This means max. LUN number reported from UFS device could be 0xC17F.
+ */
+#define UFS_UPIU_MAX_UNIT_NUM_ID	0x7F
+#define UFS_MAX_LUNS		(SCSI_W_LUN_BASE + UFS_UPIU_MAX_UNIT_NUM_ID)
+#define UFS_UPIU_WLUN_ID	(1 << 7)
+#define UFS_UPIU_MAX_GENERAL_LUN	8
+
+/* Well known logical unit id in LUN field of UPIU */
+enum {
+	UFS_UPIU_REPORT_LUNS_WLUN	= 0x81,
+	UFS_UPIU_UFS_DEVICE_WLUN	= 0xD0,
+	UFS_UPIU_BOOT_WLUN		= 0xB0,
+	UFS_UPIU_RPMB_WLUN		= 0xC4,
+};
+
+/**
+ * ufs_is_valid_unit_desc_lun - checks if the given LUN has a unit descriptor
+ * @lun: LU number to check
+ * @return: true if the lun has a matching unit descriptor, false otherwise
+ */
+static inline bool ufs_is_valid_unit_desc_lun(u8 lun)
+{
+	return (lun == UFS_UPIU_RPMB_WLUN || (lun < UFS_UPIU_MAX_GENERAL_LUN));
+}
+
+/*
+ * UFS Protocol Information Unit related definitions
+ */
+
+/* Task management functions */
+enum {
+	UFS_ABORT_TASK		= 0x01,
+	UFS_ABORT_TASK_SET	= 0x02,
+	UFS_CLEAR_TASK_SET	= 0x04,
+	UFS_LOGICAL_RESET	= 0x08,
+	UFS_QUERY_TASK		= 0x80,
+	UFS_QUERY_TASK_SET	= 0x81,
+};
+
+/* UTP UPIU Transaction Codes Initiator to Target */
+enum {
+	UPIU_TRANSACTION_NOP_OUT	= 0x00,
+	UPIU_TRANSACTION_COMMAND	= 0x01,
+	UPIU_TRANSACTION_DATA_OUT	= 0x02,
+	UPIU_TRANSACTION_TASK_REQ	= 0x04,
+	UPIU_TRANSACTION_QUERY_REQ	= 0x16,
+};
+
+/* UTP UPIU Transaction Codes Target to Initiator */
+enum {
+	UPIU_TRANSACTION_NOP_IN		= 0x20,
+	UPIU_TRANSACTION_RESPONSE	= 0x21,
+	UPIU_TRANSACTION_DATA_IN	= 0x22,
+	UPIU_TRANSACTION_TASK_RSP	= 0x24,
+	UPIU_TRANSACTION_READY_XFER	= 0x31,
+	UPIU_TRANSACTION_QUERY_RSP	= 0x36,
+	UPIU_TRANSACTION_REJECT_UPIU	= 0x3F,
+};
+
+/* UPIU Read/Write flags */
+enum {
+	UPIU_CMD_FLAGS_NONE	= 0x00,
+	UPIU_CMD_FLAGS_WRITE	= 0x20,
+	UPIU_CMD_FLAGS_READ	= 0x40,
+};
+
+/* UPIU Task Attributes */
+enum {
+	UPIU_TASK_ATTR_SIMPLE	= 0x00,
+	UPIU_TASK_ATTR_ORDERED	= 0x01,
+	UPIU_TASK_ATTR_HEADQ	= 0x02,
+	UPIU_TASK_ATTR_ACA	= 0x03,
+};
+
+/* UPIU Query request function */
+enum {
+	UPIU_QUERY_FUNC_STANDARD_READ_REQUEST           = 0x01,
+	UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST          = 0x81,
+};
+
+enum desc_header_offset {
+	QUERY_DESC_LENGTH_OFFSET	= 0x00,
+	QUERY_DESC_DESC_TYPE_OFFSET	= 0x01,
+};
+
+enum ufs_desc_max_size {
+	QUERY_DESC_DEVICE_MAX_SIZE		= 0x40,
+	QUERY_DESC_CONFIGURAION_MAX_SIZE	= 0x90,
+	QUERY_DESC_UNIT_MAX_SIZE		= 0x23,
+	QUERY_DESC_INTERCONNECT_MAX_SIZE	= 0x06,
+	/*
+	 * Max. 126 UNICODE characters (2 bytes per character) plus 2 bytes
+	 * of descriptor header.
+	 */
+	QUERY_DESC_STRING_MAX_SIZE		= 0xFE,
+	QUERY_DESC_GEOMETRY_MAZ_SIZE		= 0x44,
+	QUERY_DESC_POWER_MAX_SIZE		= 0x62,
+	QUERY_DESC_RFU_MAX_SIZE			= 0x00,
+};
+
+/* Unit descriptor parameters offsets in bytes*/
+enum unit_desc_param {
+	UNIT_DESC_PARAM_LEN			= 0x0,
+	UNIT_DESC_PARAM_TYPE			= 0x1,
+	UNIT_DESC_PARAM_UNIT_INDEX		= 0x2,
+	UNIT_DESC_PARAM_LU_ENABLE		= 0x3,
+	UNIT_DESC_PARAM_BOOT_LUN_ID		= 0x4,
+	UNIT_DESC_PARAM_LU_WR_PROTECT		= 0x5,
+	UNIT_DESC_PARAM_LU_Q_DEPTH		= 0x6,
+	UNIT_DESC_PARAM_MEM_TYPE		= 0x8,
+	UNIT_DESC_PARAM_DATA_RELIABILITY	= 0x9,
+	UNIT_DESC_PARAM_LOGICAL_BLK_SIZE	= 0xA,
+	UNIT_DESC_PARAM_LOGICAL_BLK_COUNT	= 0xB,
+	UNIT_DESC_PARAM_ERASE_BLK_SIZE		= 0x13,
+	UNIT_DESC_PARAM_PROVISIONING_TYPE	= 0x17,
+	UNIT_DESC_PARAM_PHY_MEM_RSRC_CNT	= 0x18,
+	UNIT_DESC_PARAM_CTX_CAPABILITIES	= 0x20,
+	UNIT_DESC_PARAM_LARGE_UNIT_SIZE_M1	= 0x22,
+};
+
+/* Device descriptor parameters offsets in bytes*/
+enum device_desc_param {
+	DEVICE_DESC_PARAM_LEN			= 0x0,
+	DEVICE_DESC_PARAM_TYPE			= 0x1,
+	DEVICE_DESC_PARAM_DEVICE_TYPE		= 0x2,
+	DEVICE_DESC_PARAM_DEVICE_CLASS		= 0x3,
+	DEVICE_DESC_PARAM_DEVICE_SUB_CLASS	= 0x4,
+	DEVICE_DESC_PARAM_PRTCL			= 0x5,
+	DEVICE_DESC_PARAM_NUM_LU		= 0x6,
+	DEVICE_DESC_PARAM_NUM_WLU		= 0x7,
+	DEVICE_DESC_PARAM_BOOT_ENBL		= 0x8,
+	DEVICE_DESC_PARAM_DESC_ACCSS_ENBL	= 0x9,
+	DEVICE_DESC_PARAM_INIT_PWR_MODE		= 0xA,
+	DEVICE_DESC_PARAM_HIGH_PR_LUN		= 0xB,
+	DEVICE_DESC_PARAM_SEC_RMV_TYPE		= 0xC,
+	DEVICE_DESC_PARAM_SEC_LU		= 0xD,
+	DEVICE_DESC_PARAM_BKOP_TERM_LT		= 0xE,
+	DEVICE_DESC_PARAM_ACTVE_ICC_LVL		= 0xF,
+	DEVICE_DESC_PARAM_SPEC_VER		= 0x10,
+	DEVICE_DESC_PARAM_MANF_DATE		= 0x12,
+	DEVICE_DESC_PARAM_MANF_NAME		= 0x14,
+	DEVICE_DESC_PARAM_PRDCT_NAME		= 0x15,
+	DEVICE_DESC_PARAM_SN			= 0x16,
+	DEVICE_DESC_PARAM_OEM_ID		= 0x17,
+	DEVICE_DESC_PARAM_MANF_ID		= 0x18,
+	DEVICE_DESC_PARAM_UD_OFFSET		= 0x1A,
+	DEVICE_DESC_PARAM_UD_LEN		= 0x1B,
+	DEVICE_DESC_PARAM_RTT_CAP		= 0x1C,
+	DEVICE_DESC_PARAM_FRQ_RTC		= 0x1D,
+};
+/*
+ * Logical Unit Write Protect
+ * 00h: LU not write protected
+ * 01h: LU write protected when fPowerOnWPEn =1
+ * 02h: LU permanently write protected when fPermanentWPEn =1
+ */
+enum ufs_lu_wp_type {
+	UFS_LU_NO_WP		= 0x00,
+	UFS_LU_POWER_ON_WP	= 0x01,
+	UFS_LU_PERM_WP		= 0x02,
+};
+
+/* bActiveICCLevel parameter current units */
+enum {
+	UFSHCD_NANO_AMP		= 0,
+	UFSHCD_MICRO_AMP	= 1,
+	UFSHCD_MILI_AMP		= 2,
+	UFSHCD_AMP		= 3,
+};
+
+#define POWER_DESC_MAX_SIZE			0x62
+#define POWER_DESC_MAX_ACTV_ICC_LVLS		16
+
+/* Attribute  bActiveICCLevel parameter bit masks definitions */
+#define ATTR_ICC_LVL_UNIT_OFFSET	14
+#define ATTR_ICC_LVL_UNIT_MASK		(0x3 << ATTR_ICC_LVL_UNIT_OFFSET)
+#define ATTR_ICC_LVL_VALUE_MASK		0x3FF
+
+/* Power descriptor parameters offsets in bytes */
+enum power_desc_param_offset {
+	PWR_DESC_LEN			= 0x0,
+	PWR_DESC_TYPE			= 0x1,
+	PWR_DESC_ACTIVE_LVLS_VCC_0	= 0x2,
+	PWR_DESC_ACTIVE_LVLS_VCCQ_0	= 0x22,
+	PWR_DESC_ACTIVE_LVLS_VCCQ2_0	= 0x42,
+};
+
+/* Exception event mask values */
+enum {
+	MASK_EE_STATUS		= 0xFFFF,
+	MASK_EE_URGENT_BKOPS	= (1 << 2),
+};
+
+/* Background operation status */
+enum bkops_status {
+	BKOPS_STATUS_NO_OP               = 0x0,
+	BKOPS_STATUS_NON_CRITICAL        = 0x1,
+	BKOPS_STATUS_PERF_IMPACT         = 0x2,
+	BKOPS_STATUS_CRITICAL            = 0x3,
+	BKOPS_STATUS_MAX		 = BKOPS_STATUS_CRITICAL,
+};
+
+/* Query response result code */
+enum {
+	QUERY_RESULT_SUCCESS                    = 0x00,
+	QUERY_RESULT_NOT_READABLE               = 0xF6,
+	QUERY_RESULT_NOT_WRITEABLE              = 0xF7,
+	QUERY_RESULT_ALREADY_WRITTEN            = 0xF8,
+	QUERY_RESULT_INVALID_LENGTH             = 0xF9,
+	QUERY_RESULT_INVALID_VALUE              = 0xFA,
+	QUERY_RESULT_INVALID_SELECTOR           = 0xFB,
+	QUERY_RESULT_INVALID_INDEX              = 0xFC,
+	QUERY_RESULT_INVALID_IDN                = 0xFD,
+	QUERY_RESULT_INVALID_OPCODE             = 0xFE,
+	QUERY_RESULT_GENERAL_FAILURE            = 0xFF,
+};
+
+/* UTP Transfer Request Command Type (CT) */
+enum {
+	UPIU_COMMAND_SET_TYPE_SCSI	= 0x0,
+	UPIU_COMMAND_SET_TYPE_UFS	= 0x1,
+	UPIU_COMMAND_SET_TYPE_QUERY	= 0x2,
+};
+
+/* UTP Transfer Request Command Offset */
+#define UPIU_COMMAND_TYPE_OFFSET	28
+
+/* Offset of the response code in the UPIU header */
+#define UPIU_RSP_CODE_OFFSET		8
+
+enum {
+	MASK_SCSI_STATUS		= 0xFF,
+	MASK_TASK_RESPONSE              = 0xFF00,
+	MASK_RSP_UPIU_RESULT            = 0xFFFF,
+	MASK_QUERY_DATA_SEG_LEN         = 0xFFFF,
+	MASK_RSP_UPIU_DATA_SEG_LEN	= 0xFFFF,
+	MASK_RSP_EXCEPTION_EVENT        = 0x10000,
+};
+
+/* Task management service response */
+enum {
+	UPIU_TASK_MANAGEMENT_FUNC_COMPL		= 0x00,
+	UPIU_TASK_MANAGEMENT_FUNC_NOT_SUPPORTED = 0x04,
+	UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED	= 0x08,
+	UPIU_TASK_MANAGEMENT_FUNC_FAILED	= 0x05,
+	UPIU_INCORRECT_LOGICAL_UNIT_NO		= 0x09,
+};
+
+/* UFS device power modes */
+enum ufs_dev_pwr_mode {
+	UFS_ACTIVE_PWR_MODE	= 1,
+	UFS_SLEEP_PWR_MODE	= 2,
+	UFS_POWERDOWN_PWR_MODE	= 3,
+};
+
+/**
+ * struct utp_upiu_header - UPIU header structure
+ * @dword_0: UPIU header DW-0
+ * @dword_1: UPIU header DW-1
+ * @dword_2: UPIU header DW-2
+ */
+struct utp_upiu_header {
+	__be32 dword_0;
+	__be32 dword_1;
+	__be32 dword_2;
+};
+
+/**
+ * struct utp_upiu_cmd - Command UPIU structure
+ * @data_transfer_len: Data Transfer Length DW-3
+ * @cdb: Command Descriptor Block CDB DW-4 to DW-7
+ */
+struct utp_upiu_cmd {
+	__be32 exp_data_transfer_len;
+	u8 cdb[MAX_CDB_SIZE];
+};
+
+/**
+ * struct utp_upiu_query - upiu request buffer structure for
+ * query request.
+ * @opcode: command to perform B-0
+ * @idn: a value that indicates the particular type of data B-1
+ * @index: Index to further identify data B-2
+ * @selector: Index to further identify data B-3
+ * @reserved_osf: spec reserved field B-4,5
+ * @length: number of descriptor bytes to read/write B-6,7
+ * @value: Attribute value to be written DW-5
+ * @reserved: spec reserved DW-6,7
+ */
+struct utp_upiu_query {
+	u8 opcode;
+	u8 idn;
+	u8 index;
+	u8 selector;
+	__be16 reserved_osf;
+	__be16 length;
+	__be32 value;
+	__be32 reserved[2];
+};
+
+/**
+ * struct utp_upiu_req - general upiu request structure
+ * @header:UPIU header structure DW-0 to DW-2
+ * @sc: fields structure for scsi command DW-3 to DW-7
+ * @qr: fields structure for query request DW-3 to DW-7
+ */
+struct utp_upiu_req {
+	struct utp_upiu_header header;
+	union {
+		struct utp_upiu_cmd sc;
+		struct utp_upiu_query qr;
+	};
+};
+
+/**
+ * struct utp_cmd_rsp - Response UPIU structure
+ * @residual_transfer_count: Residual transfer count DW-3
+ * @reserved: Reserved double words DW-4 to DW-7
+ * @sense_data_len: Sense data length DW-8 U16
+ * @sense_data: Sense data field DW-8 to DW-12
+ */
+struct utp_cmd_rsp {
+	__be32 residual_transfer_count;
+	__be32 reserved[4];
+	__be16 sense_data_len;
+	u8 sense_data[RESPONSE_UPIU_SENSE_DATA_LENGTH];
+};
+
+/**
+ * struct utp_upiu_rsp - general upiu response structure
+ * @header: UPIU header structure DW-0 to DW-2
+ * @sr: fields structure for scsi command DW-3 to DW-12
+ * @qr: fields structure for query request DW-3 to DW-7
+ */
+struct utp_upiu_rsp {
+	struct utp_upiu_header header;
+	union {
+		struct utp_cmd_rsp sr;
+		struct utp_upiu_query qr;
+	};
+};
+
+/**
+ * struct utp_upiu_task_req - Task request UPIU structure
+ * @header - UPIU header structure DW0 to DW-2
+ * @input_param1: Input parameter 1 DW-3
+ * @input_param2: Input parameter 2 DW-4
+ * @input_param3: Input parameter 3 DW-5
+ * @reserved: Reserved double words DW-6 to DW-7
+ */
+struct utp_upiu_task_req {
+	struct utp_upiu_header header;
+	__be32 input_param1;
+	__be32 input_param2;
+	__be32 input_param3;
+	__be32 reserved[2];
+};
+
+/**
+ * struct utp_upiu_task_rsp - Task Management Response UPIU structure
+ * @header: UPIU header structure DW0-DW-2
+ * @output_param1: Ouput parameter 1 DW3
+ * @output_param2: Output parameter 2 DW4
+ * @reserved: Reserved double words DW-5 to DW-7
+ */
+struct utp_upiu_task_rsp {
+	struct utp_upiu_header header;
+	__be32 output_param1;
+	__be32 output_param2;
+	__be32 reserved[3];
+};
+
+/**
+ * struct ufs_query_req - parameters for building a query request
+ * @query_func: UPIU header query function
+ * @upiu_req: the query request data
+ */
+struct ufs_query_req {
+	u8 query_func;
+	struct utp_upiu_query upiu_req;
+};
+
+/**
+ * struct ufs_query_resp - UPIU QUERY
+ * @response: device response code
+ * @upiu_res: query response data
+ */
+struct ufs_query_res {
+	u8 response;
+	struct utp_upiu_query upiu_res;
+};
+
+#define UFS_VREG_VCC_MIN_UV	   2700000 /* uV */
+#define UFS_VREG_VCC_MAX_UV	   3600000 /* uV */
+#define UFS_VREG_VCC_1P8_MIN_UV    1700000 /* uV */
+#define UFS_VREG_VCC_1P8_MAX_UV    1950000 /* uV */
+#define UFS_VREG_VCCQ_MIN_UV	   1100000 /* uV */
+#define UFS_VREG_VCCQ_MAX_UV	   1300000 /* uV */
+#define UFS_VREG_VCCQ2_MIN_UV	   1650000 /* uV */
+#define UFS_VREG_VCCQ2_MAX_UV	   1950000 /* uV */
+
+/*
+ * VCCQ & VCCQ2 current requirement when UFS device is in sleep state
+ * and link is in Hibern8 state.
+ */
+#define UFS_VREG_LPM_LOAD_UA	1000 /* uA */
+
+struct ufs_vreg {
+	struct regulator *reg;
+	const char *name;
+	bool enabled;
+	int min_uV;
+	int max_uV;
+	int min_uA;
+	int max_uA;
+};
+
+struct ufs_vreg_info {
+	struct ufs_vreg *vcc;
+	struct ufs_vreg *vccq;
+	struct ufs_vreg *vccq2;
+	struct ufs_vreg *vdd_hba;
+};
+
+struct ufs_dev_info {
+	bool f_power_on_wp_en;
+	/* Keeps information if any of the LU is power on write protected */
+	bool is_lu_power_on_wp;
+};
+
+#endif /* End of Header */
diff --git a/include/linux/scsi/ufs/ufshcd.h b/include/linux/scsi/ufs/ufshcd.h
new file mode 100644
index 000000000000..bb24bcb3bf30
--- /dev/null
+++ b/include/linux/scsi/ufs/ufshcd.h
@@ -0,0 +1,879 @@
+/*
+ * Universal Flash Storage Host controller driver
+ *
+ * This code is based on drivers/scsi/ufs/ufshcd.h
+ * Copyright (C) 2011-2013 Samsung India Software Operations
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * Authors:
+ *	Santosh Yaraganavi <santosh.sy@samsung.com>
+ *	Vinayak Holikatti <h.vinayak@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * See the COPYING file in the top-level directory or visit
+ * <http://www.gnu.org/licenses/gpl-2.0.html>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This program is provided "AS IS" and "WITH ALL FAULTS" and
+ * without warranty of any kind. You are solely responsible for
+ * determining the appropriateness of using and distributing
+ * the program and assume all risks associated with your exercise
+ * of rights with respect to the program, including but not limited
+ * to infringement of third party rights, the risks and costs of
+ * program errors, damage to or loss of data, programs or equipment,
+ * and unavailability or interruption of operations. Under no
+ * circumstances will the contributor of this Program be liable for
+ * any damages of any kind arising from your use or distribution of
+ * this program.
+ */
+
+#ifndef _UFSHCD_H
+#define _UFSHCD_H
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/bitops.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/regulator/consumer.h>
+
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_eh.h>
+
+#include <linux/fault-inject.h>
+#include "ufs.h"
+
+#define UFSHCD "ufshcd"
+#define UFSHCD_DRIVER_VERSION "0.2"
+
+struct ufs_hba;
+
+enum dev_cmd_type {
+	DEV_CMD_TYPE_NOP		= 0x0,
+	DEV_CMD_TYPE_QUERY		= 0x1,
+};
+
+/**
+ * struct uic_command - UIC command structure
+ * @command: UIC command
+ * @argument1: UIC command argument 1
+ * @argument2: UIC command argument 2
+ * @argument3: UIC command argument 3
+ * @cmd_active: Indicate if UIC command is outstanding
+ * @result: UIC command result
+ * @done: UIC command completion
+ */
+struct uic_command {
+	u32 command;
+	u32 argument1;
+	u32 argument2;
+	u32 argument3;
+	int cmd_active;
+	int result;
+	struct completion done;
+};
+
+/* Used to differentiate the power management options */
+enum ufs_pm_op {
+	UFS_RUNTIME_PM,
+	UFS_SYSTEM_PM,
+	UFS_SHUTDOWN_PM,
+};
+
+#define ufshcd_is_runtime_pm(op) ((op) == UFS_RUNTIME_PM)
+#define ufshcd_is_system_pm(op) ((op) == UFS_SYSTEM_PM)
+#define ufshcd_is_shutdown_pm(op) ((op) == UFS_SHUTDOWN_PM)
+
+/* Host <-> Device UniPro Link state */
+enum uic_link_state {
+	UIC_LINK_OFF_STATE	= 0, /* Link powered down or disabled */
+	UIC_LINK_ACTIVE_STATE	= 1, /* Link is in Fast/Slow/Sleep state */
+	UIC_LINK_HIBERN8_STATE	= 2, /* Link is in Hibernate state */
+};
+
+#define ufshcd_is_link_off(hba) ((hba)->uic_link_state == UIC_LINK_OFF_STATE)
+#define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \
+				    UIC_LINK_ACTIVE_STATE)
+#define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \
+				    UIC_LINK_HIBERN8_STATE)
+#define ufshcd_set_link_off(hba) ((hba)->uic_link_state = UIC_LINK_OFF_STATE)
+#define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \
+				    UIC_LINK_ACTIVE_STATE)
+#define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \
+				    UIC_LINK_HIBERN8_STATE)
+
+enum {
+	/* errors which require the host controller reset for recovery */
+	UFS_ERR_HIBERN8_EXIT,
+	UFS_ERR_VOPS_SUSPEND,
+	UFS_ERR_EH,
+	UFS_ERR_CLEAR_PEND_XFER_TM,
+	UFS_ERR_INT_FATAL_ERRORS,
+	UFS_ERR_INT_UIC_ERROR,
+
+	/* other errors */
+	UFS_ERR_HIBERN8_ENTER,
+	UFS_ERR_RESUME,
+	UFS_ERR_SUSPEND,
+	UFS_ERR_LINKSTARTUP,
+	UFS_ERR_POWER_MODE_CHANGE,
+	UFS_ERR_TASK_ABORT,
+	UFS_ERR_MAX,
+};
+
+/*
+ * UFS Power management levels.
+ * Each level is in increasing order of power savings.
+ */
+enum ufs_pm_level {
+	UFS_PM_LVL_0, /* UFS_ACTIVE_PWR_MODE, UIC_LINK_ACTIVE_STATE */
+	UFS_PM_LVL_1, /* UFS_ACTIVE_PWR_MODE, UIC_LINK_HIBERN8_STATE */
+	UFS_PM_LVL_2, /* UFS_SLEEP_PWR_MODE, UIC_LINK_ACTIVE_STATE */
+	UFS_PM_LVL_3, /* UFS_SLEEP_PWR_MODE, UIC_LINK_HIBERN8_STATE */
+	UFS_PM_LVL_4, /* UFS_POWERDOWN_PWR_MODE, UIC_LINK_HIBERN8_STATE */
+	UFS_PM_LVL_5, /* UFS_POWERDOWN_PWR_MODE, UIC_LINK_OFF_STATE */
+	UFS_PM_LVL_MAX
+};
+
+struct ufs_pm_lvl_states {
+	enum ufs_dev_pwr_mode dev_state;
+	enum uic_link_state link_state;
+};
+
+/**
+ * struct ufshcd_lrb - local reference block
+ * @utr_descriptor_ptr: UTRD address of the command
+ * @ucd_req_ptr: UCD address of the command
+ * @ucd_rsp_ptr: Response UPIU address for this command
+ * @ucd_prdt_ptr: PRDT address of the command
+ * @cmd: pointer to SCSI command
+ * @sense_buffer: pointer to sense buffer address of the SCSI command
+ * @sense_bufflen: Length of the sense buffer
+ * @scsi_status: SCSI status of the command
+ * @command_type: SCSI, UFS, Query.
+ * @task_tag: Task tag of the command
+ * @lun: LUN of the command
+ * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation)
+ */
+struct ufshcd_lrb {
+	struct utp_transfer_req_desc *utr_descriptor_ptr;
+	struct utp_upiu_req *ucd_req_ptr;
+	struct utp_upiu_rsp *ucd_rsp_ptr;
+	struct ufshcd_sg_entry *ucd_prdt_ptr;
+
+	struct scsi_cmnd *cmd;
+	u8 *sense_buffer;
+	unsigned int sense_bufflen;
+	int scsi_status;
+
+	int command_type;
+	int task_tag;
+	u8 lun; /* UPIU LUN id field is only 8-bit wide */
+	bool intr_cmd;
+};
+
+/**
+ * struct ufs_query - holds relevent data structures for query request
+ * @request: request upiu and function
+ * @descriptor: buffer for sending/receiving descriptor
+ * @response: response upiu and response
+ */
+struct ufs_query {
+	struct ufs_query_req request;
+	u8 *descriptor;
+	struct ufs_query_res response;
+};
+
+/**
+ * struct ufs_dev_cmd - all assosiated fields with device management commands
+ * @type: device management command type - Query, NOP OUT
+ * @lock: lock to allow one command at a time
+ * @complete: internal commands completion
+ * @tag_wq: wait queue until free command slot is available
+ */
+struct ufs_dev_cmd {
+	enum dev_cmd_type type;
+	struct mutex lock;
+	struct completion *complete;
+	wait_queue_head_t tag_wq;
+	struct ufs_query query;
+};
+
+/**
+ * struct ufs_clk_info - UFS clock related info
+ * @list: list headed by hba->clk_list_head
+ * @clk: clock node
+ * @name: clock name
+ * @max_freq: maximum frequency supported by the clock
+ * @min_freq: min frequency that can be used for clock scaling
+ * @curr_freq: indicates the current frequency that it is set to
+ * @enabled: variable to check against multiple enable/disable
+ */
+struct ufs_clk_info {
+	struct list_head list;
+	struct clk *clk;
+	const char *name;
+	u32 max_freq;
+	u32 min_freq;
+	u32 curr_freq;
+	bool enabled;
+};
+
+enum ufs_notify_change_status {
+	PRE_CHANGE,
+	POST_CHANGE,
+};
+
+struct ufs_pa_layer_attr {
+	u32 gear_rx;
+	u32 gear_tx;
+	u32 lane_rx;
+	u32 lane_tx;
+	u32 pwr_rx;
+	u32 pwr_tx;
+	u32 hs_rate;
+};
+
+struct ufs_pwr_mode_info {
+	bool is_valid;
+	struct ufs_pa_layer_attr info;
+};
+
+/**
+ * struct ufs_hba_variant_ops - variant specific callbacks
+ * @name: variant name
+ * @init: called when the driver is initialized
+ * @exit: called to cleanup everything done in init
+ * @get_ufs_hci_version: called to get UFS HCI version
+ * @clk_scale_notify: notifies that clks are scaled up/down
+ * @setup_clocks: called before touching any of the controller registers
+ * @setup_regulators: called before accessing the host controller
+ * @hce_enable_notify: called before and after HCE enable bit is set to allow
+ *                     variant specific Uni-Pro initialization.
+ * @link_startup_notify: called before and after Link startup is carried out
+ *                       to allow variant specific Uni-Pro initialization.
+ * @pwr_change_notify: called before and after a power mode change
+ *			is carried out to allow vendor spesific capabilities
+ *			to be set.
+ * @suspend: called during host controller PM callback
+ * @resume: called during host controller PM callback
+ * @update_sec_cfg: called to restore host controller secure configuration
+ * @dbg_register_dump: used to dump controller debug information
+ */
+struct ufs_hba_variant_ops {
+	const char *name;
+	int	(*init)(struct ufs_hba *);
+	void    (*exit)(struct ufs_hba *);
+	u32	(*get_ufs_hci_version)(struct ufs_hba *);
+	int	(*clk_scale_notify)(struct ufs_hba *, bool,
+				    enum ufs_notify_change_status);
+	int	(*setup_clocks)(struct ufs_hba *, bool);
+	int     (*setup_regulators)(struct ufs_hba *, bool);
+	int	(*hce_enable_notify)(struct ufs_hba *,
+				     enum ufs_notify_change_status);
+	int	(*link_startup_notify)(struct ufs_hba *,
+				       enum ufs_notify_change_status);
+	int	(*pwr_change_notify)(struct ufs_hba *,
+					enum ufs_notify_change_status status,
+					struct ufs_pa_layer_attr *,
+					struct ufs_pa_layer_attr *);
+	int     (*suspend)(struct ufs_hba *, enum ufs_pm_op);
+	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
+	int	(*update_sec_cfg)(struct ufs_hba *hba, bool restore_sec_cfg);
+	void	(*dbg_register_dump)(struct ufs_hba *hba);
+};
+
+/* clock gating state  */
+enum clk_gating_state {
+	CLKS_OFF,
+	CLKS_ON,
+	REQ_CLKS_OFF,
+	REQ_CLKS_ON,
+};
+
+/**
+ * struct ufs_clk_gating - UFS clock gating related info
+ * @gate_work: worker to turn off clocks after some delay as specified in
+ * delay_ms
+ * @ungate_work: worker to turn on clocks that will be used in case of
+ * interrupt context
+ * @state: the current clocks state
+ * @delay_ms: gating delay in ms
+ * @is_suspended: clk gating is suspended when set to 1 which can be used
+ * during suspend/resume
+ * @delay_attr: sysfs attribute to control delay_attr
+ * @enable_attr: sysfs attribute to enable/disable clock gating
+ * @is_enabled: Indicates the current status of clock gating
+ * @active_reqs: number of requests that are pending and should be waited for
+ * completion before gating clocks.
+ */
+struct ufs_clk_gating {
+	struct delayed_work gate_work;
+	struct work_struct ungate_work;
+	enum clk_gating_state state;
+	unsigned long delay_ms;
+	bool is_suspended;
+	struct device_attribute delay_attr;
+	struct device_attribute enable_attr;
+	bool is_enabled;
+	int active_reqs;
+};
+
+struct ufs_clk_scaling {
+	ktime_t  busy_start_t;
+	bool is_busy_started;
+	unsigned long  tot_busy_t;
+	unsigned long window_start_t;
+	struct device_attribute enable_attr;
+	bool is_allowed;
+};
+
+/**
+ * struct ufs_init_prefetch - contains data that is pre-fetched once during
+ * initialization
+ * @icc_level: icc level which was read during initialization
+ */
+struct ufs_init_prefetch {
+	u32 icc_level;
+};
+
+#ifdef CONFIG_DEBUG_FS
+struct ufs_stats {
+	bool enabled;
+	u64 **tag_stats;
+	int q_depth;
+	int err_stats[UFS_ERR_MAX];
+};
+
+struct debugfs_files {
+	struct dentry *debugfs_root;
+	struct dentry *tag_stats;
+	struct dentry *err_stats;
+	struct dentry *show_hba;
+	struct dentry *host_regs;
+	struct dentry *dump_dev_desc;
+	struct dentry *power_mode;
+#ifdef CONFIG_UFS_FAULT_INJECTION
+	struct fault_attr fail_attr;
+#endif
+	bool is_sys_suspended;
+};
+
+/* tag stats statistics types */
+enum ts_types {
+	TS_NOT_SUPPORTED	= -1,
+	TS_TAG			= 0,
+	TS_READ			= 1,
+	TS_WRITE		= 2,
+	TS_URGENT		= 3,
+	TS_FLUSH		= 4,
+	TS_NUM_STATS		= 5,
+};
+#endif
+
+/**
+ * struct ufs_hba - per adapter private structure
+ * @mmio_base: UFSHCI base register address
+ * @ucdl_base_addr: UFS Command Descriptor base address
+ * @utrdl_base_addr: UTP Transfer Request Descriptor base address
+ * @utmrdl_base_addr: UTP Task Management Descriptor base address
+ * @ucdl_dma_addr: UFS Command Descriptor DMA address
+ * @utrdl_dma_addr: UTRDL DMA address
+ * @utmrdl_dma_addr: UTMRDL DMA address
+ * @host: Scsi_Host instance of the driver
+ * @dev: device handle
+ * @lrb: local reference block
+ * @lrb_in_use: lrb in use
+ * @outstanding_tasks: Bits representing outstanding task requests
+ * @outstanding_reqs: Bits representing outstanding transfer requests
+ * @capabilities: UFS Controller Capabilities
+ * @nutrs: Transfer Request Queue depth supported by controller
+ * @nutmrs: Task Management Queue depth supported by controller
+ * @ufs_version: UFS Version to which controller complies
+ * @vops: pointer to variant specific operations
+ * @priv: pointer to variant specific private data
+ * @irq: Irq number of the controller
+ * @active_uic_cmd: handle of active UIC command
+ * @uic_cmd_mutex: mutex for uic command
+ * @tm_wq: wait queue for task management
+ * @tm_tag_wq: wait queue for free task management slots
+ * @tm_slots_in_use: bit map of task management request slots in use
+ * @pwr_done: completion for power mode change
+ * @tm_condition: condition variable for task management
+ * @ufshcd_state: UFSHCD states
+ * @eh_flags: Error handling flags
+ * @intr_mask: Interrupt Mask Bits
+ * @ee_ctrl_mask: Exception event control mask
+ * @is_powered: flag to check if HBA is powered
+ * @is_init_prefetch: flag to check if data was pre-fetched in initialization
+ * @init_prefetch_data: data pre-fetched during initialization
+ * @eh_work: Worker to handle UFS errors that require s/w attention
+ * @eeh_work: Worker to handle exception events
+ * @errors: HBA errors
+ * @uic_error: UFS interconnect layer error status
+ * @saved_err: sticky error mask
+ * @saved_uic_err: sticky UIC error mask
+ * @dev_cmd: ufs device management command information
+ * @last_dme_cmd_tstamp: time stamp of the last completed DME command
+ * @auto_bkops_enabled: to track whether bkops is enabled in device
+ * @ufs_stats: ufshcd statistics to be used via debugfs
+ * @debugfs_files: debugfs files associated with the ufs stats
+ * @vreg_info: UFS device voltage regulator information
+ * @clk_list_head: UFS host controller clocks list node head
+ * @pwr_info: holds current power mode
+ * @max_pwr_info: keeps the device max valid pwm
+ */
+struct ufs_hba {
+	void __iomem *mmio_base;
+
+	/* Virtual memory reference */
+	struct utp_transfer_cmd_desc *ucdl_base_addr;
+	struct utp_transfer_req_desc *utrdl_base_addr;
+	struct utp_task_req_desc *utmrdl_base_addr;
+
+	/* DMA memory reference */
+	dma_addr_t ucdl_dma_addr;
+	dma_addr_t utrdl_dma_addr;
+	dma_addr_t utmrdl_dma_addr;
+
+	struct Scsi_Host *host;
+	struct device *dev;
+	/*
+	 * This field is to keep a reference to "scsi_device" corresponding to
+	 * "UFS device" W-LU.
+	 */
+	struct scsi_device *sdev_ufs_device;
+
+	enum ufs_dev_pwr_mode curr_dev_pwr_mode;
+	enum uic_link_state uic_link_state;
+	/* Desired UFS power management level during runtime PM */
+	enum ufs_pm_level rpm_lvl;
+	/* Desired UFS power management level during system PM */
+	enum ufs_pm_level spm_lvl;
+	struct device_attribute rpm_lvl_attr;
+	struct device_attribute spm_lvl_attr;
+	int pm_op_in_progress;
+
+	struct ufshcd_lrb *lrb;
+	unsigned long lrb_in_use;
+
+	unsigned long outstanding_tasks;
+	unsigned long outstanding_reqs;
+
+	u32 capabilities;
+	int nutrs;
+	int nutmrs;
+	u32 ufs_version;
+	struct ufs_hba_variant_ops *vops;
+	void *priv;
+	unsigned int irq;
+	bool is_irq_enabled;
+
+	/* Interrupt aggregation support is broken */
+	#define UFSHCD_QUIRK_BROKEN_INTR_AGGR			UFS_BIT(0)
+
+	/*
+	 * delay before each dme command is required as the unipro
+	 * layer has shown instabilities
+	 */
+	#define UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS		UFS_BIT(1)
+
+	/*
+	 * If UFS host controller is having issue in processing LCC (Line
+	 * Control Command) coming from device then enable this quirk.
+	 * When this quirk is enabled, host controller driver should disable
+	 * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
+	 * attribute of device to 0).
+	 */
+	#define UFSHCD_QUIRK_BROKEN_LCC				UFS_BIT(2)
+
+	/*
+	 * The attribute PA_RXHSUNTERMCAP specifies whether or not the
+	 * inbound Link supports unterminated line in HS mode. Setting this
+	 * attribute to 1 fixes moving to HS gear.
+	 */
+	#define UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP		UFS_BIT(3)
+
+	/*
+	 * This quirk needs to be enabled if the host contoller only allows
+	 * accessing the peer dme attributes in AUTO mode (FAST AUTO or
+	 * SLOW AUTO).
+	 */
+	#define UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE		UFS_BIT(4)
+
+	/*
+	 * This quirk needs to be enabled if the host contoller doesn't
+	 * advertise the correct version in UFS_VER register. If this quirk
+	 * is enabled, standard UFS host driver will call the vendor specific
+	 * ops (get_ufs_hci_version) to get the correct version.
+	 */
+	#define UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION		UFS_BIT(5)
+
+	unsigned int quirks;	/* Deviations from standard UFSHCI spec. */
+
+	/* Device deviations from standard UFS device spec. */
+	unsigned int dev_quirks;
+
+	wait_queue_head_t tm_wq;
+	wait_queue_head_t tm_tag_wq;
+	unsigned long tm_condition;
+	unsigned long tm_slots_in_use;
+
+	struct uic_command *active_uic_cmd;
+	struct mutex uic_cmd_mutex;
+	struct completion *uic_async_done;
+
+	u32 ufshcd_state;
+	u32 eh_flags;
+	u32 intr_mask;
+	u16 ee_ctrl_mask;
+	bool is_powered;
+	bool is_init_prefetch;
+	struct ufs_init_prefetch init_prefetch_data;
+
+	/* Work Queues */
+	struct work_struct eh_work;
+	struct work_struct eeh_work;
+
+	/* HBA Errors */
+	u32 errors;
+	u32 uic_error;
+	u32 saved_err;
+	u32 saved_uic_err;
+
+	/* Device management request data */
+	struct ufs_dev_cmd dev_cmd;
+	ktime_t last_dme_cmd_tstamp;
+
+	/* Keeps information of the UFS device connected to this host */
+	struct ufs_dev_info dev_info;
+	bool auto_bkops_enabled;
+
+#ifdef CONFIG_DEBUG_FS
+	struct ufs_stats ufs_stats;
+	struct debugfs_files debugfs_files;
+#endif
+
+	struct ufs_vreg_info vreg_info;
+	struct list_head clk_list_head;
+
+	bool wlun_dev_clr_ua;
+
+	struct ufs_pa_layer_attr pwr_info;
+	struct ufs_pwr_mode_info max_pwr_info;
+
+	struct ufs_clk_gating clk_gating;
+	/* Control to enable/disable host capabilities */
+	u32 caps;
+	/* Allow dynamic clk gating */
+#define UFSHCD_CAP_CLK_GATING	(1 << 0)
+	/* Allow hiberb8 with clk gating */
+#define UFSHCD_CAP_HIBERN8_WITH_CLK_GATING (1 << 1)
+	/* Allow dynamic clk scaling */
+#define UFSHCD_CAP_CLK_SCALING	(1 << 2)
+	/* Allow auto bkops to enabled during runtime suspend */
+#define UFSHCD_CAP_AUTO_BKOPS_SUSPEND (1 << 3)
+	/*
+	 * This capability allows host controller driver to use the UFS HCI's
+	 * interrupt aggregation capability.
+	 * CAUTION: Enabling this might reduce overall UFS throughput.
+	 */
+#define UFSHCD_CAP_INTR_AGGR (1 << 4)
+
+	struct devfreq *devfreq;
+	struct ufs_clk_scaling clk_scaling;
+	bool is_sys_suspended;
+};
+
+/* Returns true if clocks can be gated. Otherwise false */
+static inline bool ufshcd_is_clkgating_allowed(struct ufs_hba *hba)
+{
+	return hba->caps & UFSHCD_CAP_CLK_GATING;
+}
+static inline bool ufshcd_can_hibern8_during_gating(struct ufs_hba *hba)
+{
+	return hba->caps & UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
+}
+static inline int ufshcd_is_clkscaling_supported(struct ufs_hba *hba)
+{
+	return hba->caps & UFSHCD_CAP_CLK_SCALING;
+}
+static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba)
+{
+	return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
+}
+
+static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba)
+{
+	if ((hba->caps & UFSHCD_CAP_INTR_AGGR) &&
+	    !(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR))
+		return true;
+	else
+		return false;
+}
+
+#define ufshcd_writel(hba, val, reg)	\
+	writel_relaxed((val), (hba)->mmio_base + (reg))
+#define ufshcd_readl(hba, reg)	\
+	readl_relaxed((hba)->mmio_base + (reg))
+
+/**
+ * ufshcd_rmwl - read modify write into a register
+ * @hba - per adapter instance
+ * @mask - mask to apply on read value
+ * @val - actual value to write
+ * @reg - register address
+ */
+static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg)
+{
+       u32 tmp;
+
+	tmp = ufshcd_readl(hba, reg);
+	tmp &= ~mask;
+	tmp |= (val & mask);
+	ufshcd_writel(hba, tmp, reg);
+}
+
+int ufshcd_alloc_host(struct device *, struct ufs_hba **);
+void ufshcd_dealloc_host(struct ufs_hba *);
+int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
+void ufshcd_remove(struct ufs_hba *);
+int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
+				u32 val, unsigned long interval_us,
+				unsigned long timeout_ms, bool can_sleep);
+
+/**
+ * ufshcd_set_variant - set variant specific data to the hba
+ * @hba - per adapter instance
+ * @variant - pointer to variant specific data
+ */
+static inline void ufshcd_set_variant(struct ufs_hba *hba, void *variant)
+{
+	BUG_ON(!hba);
+	hba->priv = variant;
+}
+
+/**
+ * ufshcd_get_variant - get variant specific data from the hba
+ * @hba - per adapter instance
+ */
+static inline void *ufshcd_get_variant(struct ufs_hba *hba)
+{
+	BUG_ON(!hba);
+	return hba->priv;
+}
+
+extern int ufshcd_runtime_suspend(struct ufs_hba *hba);
+extern int ufshcd_runtime_resume(struct ufs_hba *hba);
+extern int ufshcd_runtime_idle(struct ufs_hba *hba);
+extern int ufshcd_system_suspend(struct ufs_hba *hba);
+extern int ufshcd_system_resume(struct ufs_hba *hba);
+extern int ufshcd_shutdown(struct ufs_hba *hba);
+extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
+			       u8 attr_set, u32 mib_val, u8 peer);
+extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
+			       u32 *mib_val, u8 peer);
+extern int ufshcd_config_pwr_mode(struct ufs_hba *hba,
+		struct ufs_pa_layer_attr *desired_pwr_mode);
+
+/* UIC command interfaces for DME primitives */
+#define DME_LOCAL	0
+#define DME_PEER	1
+#define ATTR_SET_NOR	0	/* NORMAL */
+#define ATTR_SET_ST	1	/* STATIC */
+
+static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel,
+				 u32 mib_val)
+{
+	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
+				   mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel,
+				    u32 mib_val)
+{
+	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
+				   mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel,
+				      u32 mib_val)
+{
+	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
+				   mib_val, DME_PEER);
+}
+
+static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel,
+					 u32 mib_val)
+{
+	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
+				   mib_val, DME_PEER);
+}
+
+static inline int ufshcd_dme_get(struct ufs_hba *hba,
+				 u32 attr_sel, u32 *mib_val)
+{
+	return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_peer_get(struct ufs_hba *hba,
+				      u32 attr_sel, u32 *mib_val)
+{
+	return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER);
+}
+
+int ufshcd_read_device_desc(struct ufs_hba *hba, u8 *buf, u32 size);
+
+#define ASCII_STD true
+#define UTF16_STD false
+int ufshcd_read_string_desc(struct ufs_hba *hba, int desc_index, u8 *buf,
+				u32 size, bool ascii);
+/* variant specific ops structures */
+#ifdef CONFIG_SCSI_UFS_QCOM
+extern const struct ufs_hba_variant_ops ufs_hba_qcom_vops;
+#else
+static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
+	.name = "qcom",
+};
+#endif
+
+/* Expose Query-Request API */
+int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode,
+	enum flag_idn idn, bool *flag_res);
+int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode,
+	enum attr_idn idn, u8 index, u8 selector, u32 *attr_val);
+int ufshcd_query_descriptor(struct ufs_hba *hba, enum query_opcode opcode,
+	enum desc_idn idn, u8 index, u8 selector, u8 *desc_buf, int *buf_len);
+
+int ufshcd_hold(struct ufs_hba *hba, bool async);
+void ufshcd_release(struct ufs_hba *hba);
+
+/* Wrapper functions for safely calling variant operations */
+static inline const char *ufshcd_get_var_name(struct ufs_hba *hba)
+{
+	if (hba->vops)
+		return hba->vops->name;
+	return "";
+}
+
+static inline int ufshcd_vops_init(struct ufs_hba *hba)
+{
+	if (hba->vops && hba->vops->init)
+		return hba->vops->init(hba);
+
+	return 0;
+}
+
+static inline void ufshcd_vops_exit(struct ufs_hba *hba)
+{
+	if (hba->vops && hba->vops->exit)
+		return hba->vops->exit(hba);
+}
+
+static inline u32 ufshcd_vops_get_ufs_hci_version(struct ufs_hba *hba)
+{
+	if (hba->vops && hba->vops->get_ufs_hci_version)
+		return hba->vops->get_ufs_hci_version(hba);
+
+	return ufshcd_readl(hba, REG_UFS_VERSION);
+}
+
+static inline int ufshcd_vops_clk_scale_notify(struct ufs_hba *hba,
+			bool up, enum ufs_notify_change_status status)
+{
+	if (hba->vops && hba->vops->clk_scale_notify)
+		return hba->vops->clk_scale_notify(hba, up, status);
+	return 0;
+}
+
+static inline int ufshcd_vops_setup_clocks(struct ufs_hba *hba, bool on)
+{
+	if (hba->vops && hba->vops->setup_clocks)
+		return hba->vops->setup_clocks(hba, on);
+	return 0;
+}
+
+static inline int ufshcd_vops_setup_regulators(struct ufs_hba *hba, bool status)
+{
+	if (hba->vops && hba->vops->setup_regulators)
+		return hba->vops->setup_regulators(hba, status);
+
+	return 0;
+}
+
+static inline int ufshcd_vops_hce_enable_notify(struct ufs_hba *hba,
+						bool status)
+{
+	if (hba->vops && hba->vops->hce_enable_notify)
+		return hba->vops->hce_enable_notify(hba, status);
+
+	return 0;
+}
+static inline int ufshcd_vops_link_startup_notify(struct ufs_hba *hba,
+						bool status)
+{
+	if (hba->vops && hba->vops->link_startup_notify)
+		return hba->vops->link_startup_notify(hba, status);
+
+	return 0;
+}
+
+static inline int ufshcd_vops_pwr_change_notify(struct ufs_hba *hba,
+				  bool status,
+				  struct ufs_pa_layer_attr *dev_max_params,
+				  struct ufs_pa_layer_attr *dev_req_params)
+{
+	if (hba->vops && hba->vops->pwr_change_notify)
+		return hba->vops->pwr_change_notify(hba, status,
+					dev_max_params, dev_req_params);
+
+	return -ENOTSUPP;
+}
+
+static inline int ufshcd_vops_suspend(struct ufs_hba *hba, enum ufs_pm_op op)
+{
+	if (hba->vops && hba->vops->suspend)
+		return hba->vops->suspend(hba, op);
+
+	return 0;
+}
+
+static inline int ufshcd_vops_resume(struct ufs_hba *hba, enum ufs_pm_op op)
+{
+	if (hba->vops && hba->vops->resume)
+		return hba->vops->resume(hba, op);
+
+	return 0;
+}
+
+static inline void ufshcd_vops_dbg_register_dump(struct ufs_hba *hba)
+{
+	if (hba->vops && hba->vops->dbg_register_dump)
+		hba->vops->dbg_register_dump(hba);
+}
+
+#endif /* End of Header */
diff --git a/include/linux/scsi/ufs/unipro.h b/include/linux/scsi/ufs/unipro.h
new file mode 100644
index 000000000000..6f9cd646930a
--- /dev/null
+++ b/include/linux/scsi/ufs/unipro.h
@@ -0,0 +1,213 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UNIPRO_H_
+#define _UNIPRO_H_
+
+/*
+ * M-TX Configuration Attributes
+ */
+#define TX_MODE					0x0021
+#define TX_HSRATE_SERIES			0x0022
+#define TX_HSGEAR				0x0023
+#define TX_PWMGEAR				0x0024
+#define TX_AMPLITUDE				0x0025
+#define TX_HS_SLEWRATE				0x0026
+#define TX_SYNC_SOURCE				0x0027
+#define TX_HS_SYNC_LENGTH			0x0028
+#define TX_HS_PREPARE_LENGTH			0x0029
+#define TX_LS_PREPARE_LENGTH			0x002A
+#define TX_HIBERN8_CONTROL			0x002B
+#define TX_LCC_ENABLE				0x002C
+#define TX_PWM_BURST_CLOSURE_EXTENSION		0x002D
+#define TX_BYPASS_8B10B_ENABLE			0x002E
+#define TX_DRIVER_POLARITY			0x002F
+#define TX_HS_UNTERMINATED_LINE_DRIVE_ENABLE	0x0030
+#define TX_LS_TERMINATED_LINE_DRIVE_ENABLE	0x0031
+#define TX_LCC_SEQUENCER			0x0032
+#define TX_MIN_ACTIVATETIME			0x0033
+#define TX_PWM_G6_G7_SYNC_LENGTH		0x0034
+
+/*
+ * M-RX Configuration Attributes
+ */
+#define RX_MODE					0x00A1
+#define RX_HSRATE_SERIES			0x00A2
+#define RX_HSGEAR				0x00A3
+#define RX_PWMGEAR				0x00A4
+#define RX_LS_TERMINATED_ENABLE			0x00A5
+#define RX_HS_UNTERMINATED_ENABLE		0x00A6
+#define RX_ENTER_HIBERN8			0x00A7
+#define RX_BYPASS_8B10B_ENABLE			0x00A8
+#define RX_TERMINATION_FORCE_ENABLE		0x0089
+
+#define is_mphy_tx_attr(attr)			(attr < RX_MODE)
+/*
+ * PHY Adpater attributes
+ */
+#define PA_ACTIVETXDATALANES	0x1560
+#define PA_ACTIVERXDATALANES	0x1580
+#define PA_TXTRAILINGCLOCKS	0x1564
+#define PA_PHY_TYPE		0x1500
+#define PA_AVAILTXDATALANES	0x1520
+#define PA_AVAILRXDATALANES	0x1540
+#define PA_MINRXTRAILINGCLOCKS	0x1543
+#define PA_TXPWRSTATUS		0x1567
+#define PA_RXPWRSTATUS		0x1582
+#define PA_TXFORCECLOCK		0x1562
+#define PA_TXPWRMODE		0x1563
+#define PA_LEGACYDPHYESCDL	0x1570
+#define PA_MAXTXSPEEDFAST	0x1521
+#define PA_MAXTXSPEEDSLOW	0x1522
+#define PA_MAXRXSPEEDFAST	0x1541
+#define PA_MAXRXSPEEDSLOW	0x1542
+#define PA_TXLINKSTARTUPHS	0x1544
+#define PA_TXSPEEDFAST		0x1565
+#define PA_TXSPEEDSLOW		0x1566
+#define PA_REMOTEVERINFO	0x15A0
+#define PA_TXGEAR		0x1568
+#define PA_TXTERMINATION	0x1569
+#define PA_HSSERIES		0x156A
+#define PA_PWRMODE		0x1571
+#define PA_RXGEAR		0x1583
+#define PA_RXTERMINATION	0x1584
+#define PA_MAXRXPWMGEAR		0x1586
+#define PA_MAXRXHSGEAR		0x1587
+#define PA_RXHSUNTERMCAP	0x15A5
+#define PA_RXLSTERMCAP		0x15A6
+#define PA_PACPREQTIMEOUT	0x1590
+#define PA_PACPREQEOBTIMEOUT	0x1591
+#define PA_HIBERN8TIME		0x15A7
+#define PA_LOCALVERINFO		0x15A9
+#define PA_TACTIVATE		0x15A8
+#define PA_PACPFRAMECOUNT	0x15C0
+#define PA_PACPERRORCOUNT	0x15C1
+#define PA_PHYTESTCONTROL	0x15C2
+#define PA_PWRMODEUSERDATA0	0x15B0
+#define PA_PWRMODEUSERDATA1	0x15B1
+#define PA_PWRMODEUSERDATA2	0x15B2
+#define PA_PWRMODEUSERDATA3	0x15B3
+#define PA_PWRMODEUSERDATA4	0x15B4
+#define PA_PWRMODEUSERDATA5	0x15B5
+#define PA_PWRMODEUSERDATA6	0x15B6
+#define PA_PWRMODEUSERDATA7	0x15B7
+#define PA_PWRMODEUSERDATA8	0x15B8
+#define PA_PWRMODEUSERDATA9	0x15B9
+#define PA_PWRMODEUSERDATA10	0x15BA
+#define PA_PWRMODEUSERDATA11	0x15BB
+#define PA_CONNECTEDTXDATALANES	0x1561
+#define PA_CONNECTEDRXDATALANES	0x1581
+#define PA_LOGICALLANEMAP	0x15A1
+#define PA_SLEEPNOCONFIGTIME	0x15A2
+#define PA_STALLNOCONFIGTIME	0x15A3
+#define PA_SAVECONFIGTIME	0x15A4
+
+/* PA power modes */
+enum {
+	FAST_MODE	= 1,
+	SLOW_MODE	= 2,
+	FASTAUTO_MODE	= 4,
+	SLOWAUTO_MODE	= 5,
+	UNCHANGED	= 7,
+};
+
+/* PA TX/RX Frequency Series */
+enum {
+	PA_HS_MODE_A	= 1,
+	PA_HS_MODE_B	= 2,
+};
+
+enum ufs_pwm_gear_tag {
+	UFS_PWM_DONT_CHANGE,	/* Don't change Gear */
+	UFS_PWM_G1,		/* PWM Gear 1 (default for reset) */
+	UFS_PWM_G2,		/* PWM Gear 2 */
+	UFS_PWM_G3,		/* PWM Gear 3 */
+	UFS_PWM_G4,		/* PWM Gear 4 */
+	UFS_PWM_G5,		/* PWM Gear 5 */
+	UFS_PWM_G6,		/* PWM Gear 6 */
+	UFS_PWM_G7,		/* PWM Gear 7 */
+};
+
+enum ufs_hs_gear_tag {
+	UFS_HS_DONT_CHANGE,	/* Don't change Gear */
+	UFS_HS_G1,		/* HS Gear 1 (default for reset) */
+	UFS_HS_G2,		/* HS Gear 2 */
+	UFS_HS_G3,		/* HS Gear 3 */
+};
+
+/*
+ * Data Link Layer Attributes
+ */
+#define DL_TC0TXFCTHRESHOLD	0x2040
+#define DL_FC0PROTTIMEOUTVAL	0x2041
+#define DL_TC0REPLAYTIMEOUTVAL	0x2042
+#define DL_AFC0REQTIMEOUTVAL	0x2043
+#define DL_AFC0CREDITTHRESHOLD	0x2044
+#define DL_TC0OUTACKTHRESHOLD	0x2045
+#define DL_TC1TXFCTHRESHOLD	0x2060
+#define DL_FC1PROTTIMEOUTVAL	0x2061
+#define DL_TC1REPLAYTIMEOUTVAL	0x2062
+#define DL_AFC1REQTIMEOUTVAL	0x2063
+#define DL_AFC1CREDITTHRESHOLD	0x2064
+#define DL_TC1OUTACKTHRESHOLD	0x2065
+#define DL_TXPREEMPTIONCAP	0x2000
+#define DL_TC0TXMAXSDUSIZE	0x2001
+#define DL_TC0RXINITCREDITVAL	0x2002
+#define DL_TC0TXBUFFERSIZE	0x2005
+#define DL_PEERTC0PRESENT	0x2046
+#define DL_PEERTC0RXINITCREVAL	0x2047
+#define DL_TC1TXMAXSDUSIZE	0x2003
+#define DL_TC1RXINITCREDITVAL	0x2004
+#define DL_TC1TXBUFFERSIZE	0x2006
+#define DL_PEERTC1PRESENT	0x2066
+#define DL_PEERTC1RXINITCREVAL	0x2067
+
+/*
+ * Network Layer Attributes
+ */
+#define N_DEVICEID		0x3000
+#define N_DEVICEID_VALID	0x3001
+#define N_TC0TXMAXSDUSIZE	0x3020
+#define N_TC1TXMAXSDUSIZE	0x3021
+
+/*
+ * Transport Layer Attributes
+ */
+#define T_NUMCPORTS		0x4000
+#define T_NUMTESTFEATURES	0x4001
+#define T_CONNECTIONSTATE	0x4020
+#define T_PEERDEVICEID		0x4021
+#define T_PEERCPORTID		0x4022
+#define T_TRAFFICCLASS		0x4023
+#define T_PROTOCOLID		0x4024
+#define T_CPORTFLAGS		0x4025
+#define T_TXTOKENVALUE		0x4026
+#define T_RXTOKENVALUE		0x4027
+#define T_LOCALBUFFERSPACE	0x4028
+#define T_PEERBUFFERSPACE	0x4029
+#define T_CREDITSTOSEND		0x402A
+#define T_CPORTMODE		0x402B
+#define T_TC0TXMAXSDUSIZE	0x4060
+#define T_TC1TXMAXSDUSIZE	0x4061
+
+#ifdef FALSE
+#undef FALSE
+#endif
+
+#ifdef TRUE
+#undef TRUE
+#endif
+
+/* Boolean attribute values */
+enum {
+	FALSE = 0,
+	TRUE,
+};
+
+#endif /* _UNIPRO_H_ */