Merge tag 'asoc-v3.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v3.10

A series of driver specific updates, none particularly critical, plus
one fix to the compressed API code to handle capture streams properly
which is very safe for mainline as there's no current users.

25 files changed, 151 insertions, 37 deletions

diff --git a/include/linux/acpi_dma.h b/include/linux/acpi_dma.h
index d09deabc7bf6..fb0298082916 100644
--- a/include/linux/acpi_dma.h
+++ b/include/linux/acpi_dma.h
@@ -37,6 +37,8 @@ struct acpi_dma_spec {
  * @dev:		struct device of this controller
  * @acpi_dma_xlate:	callback function to find a suitable channel
  * @data:		private data used by a callback function
+ * @base_request_line:	first supported request line (CSRT)
+ * @end_request_line:	last supported request line (CSRT)
  */
 struct acpi_dma {
 	struct list_head	dma_controllers;
@@ -44,6 +46,8 @@ struct acpi_dma {
 	struct dma_chan		*(*acpi_dma_xlate)
 				(struct acpi_dma_spec *, struct acpi_dma *);
 	void			*data;
+	unsigned short		base_request_line;
+	unsigned short		end_request_line;
 };
 
 /* Used with acpi_dma_simple_xlate() */
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index f14a98a79c9d..2e34db82a643 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -134,7 +134,10 @@ struct bcma_host_ops {
 #define BCMA_CORE_I2S			0x834
 #define BCMA_CORE_SDR_DDR1_MEM_CTL	0x835	/* SDR/DDR1 memory controller core */
 #define BCMA_CORE_SHIM			0x837	/* SHIM component in ubus/6362 */
-#define BCMA_CORE_ARM_CR4		0x83e
+#define BCMA_CORE_PHY_AC		0x83B
+#define BCMA_CORE_PCIE2			0x83C	/* PCI Express Gen2 */
+#define BCMA_CORE_USB30_DEV		0x83D
+#define BCMA_CORE_ARM_CR4		0x83E
 #define BCMA_CORE_DEFAULT		0xFFF
 
 #define BCMA_MAX_NR_CORES		16
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index b840a4960282..677b4f01b2d0 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -1,3 +1,6 @@
+#ifndef _LINUX_BRCMPHY_H
+#define _LINUX_BRCMPHY_H
+
 #define PHY_ID_BCM50610			0x0143bd60
 #define PHY_ID_BCM50610M		0x0143bd70
 #define PHY_ID_BCM5241			0x0143bc30
@@ -29,3 +32,5 @@
 #define PHY_BRCM_CLEAR_RGMII_MODE	0x00004000
 #define PHY_BRCM_DIS_TXCRXC_NOENRGY	0x00008000
 #define PHY_BCM_FLAGS_VALID		0x80000000
+
+#endif /* _LINUX_BRCMPHY_H */
diff --git a/include/linux/journal-head.h b/include/linux/journal-head.h
index 13a3da25ff07..98cd41bb39c8 100644
--- a/include/linux/journal-head.h
+++ b/include/linux/journal-head.h
@@ -30,15 +30,19 @@ struct journal_head {
 
 	/*
 	 * Journalling list for this buffer [jbd_lock_bh_state()]
+	 * NOTE: We *cannot* combine this with b_modified into a bitfield
+	 * as gcc would then (which the C standard allows but which is
+	 * very unuseful) make 64-bit accesses to the bitfield and clobber
+	 * b_jcount if its update races with bitfield modification.
 	 */
-	unsigned b_jlist:4;
+	unsigned b_jlist;
 
 	/*
 	 * This flag signals the buffer has been modified by
 	 * the currently running transaction
 	 * [jbd_lock_bh_state()]
 	 */
-	unsigned b_modified:1;
+	unsigned b_modified;
 
 	/*
 	 * Copy of the buffer data frozen for writing to the log.
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index e96329ceb28c..e9ef6d6b51d5 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -562,6 +562,9 @@ int __trace_bprintk(unsigned long ip, const char *fmt, ...);
 extern __printf(2, 3)
 int __trace_printk(unsigned long ip, const char *fmt, ...);
 
+extern int __trace_bputs(unsigned long ip, const char *str);
+extern int __trace_puts(unsigned long ip, const char *str, int size);
+
 /**
  * trace_puts - write a string into the ftrace buffer
  * @str: the string to record
@@ -587,8 +590,6 @@ int __trace_printk(unsigned long ip, const char *fmt, ...);
  *  (1 when __trace_bputs is used, strlen(str) when __trace_puts is used)
  */
 
-extern int __trace_bputs(unsigned long ip, const char *str);
-extern int __trace_puts(unsigned long ip, const char *str, int size);
 #define trace_puts(str) ({						\
 	static const char *trace_printk_fmt				\
 		__attribute__((section("__trace_printk_fmt"))) =	\
diff --git a/include/linux/kref.h b/include/linux/kref.h
index e15828fd71f1..484604d184be 100644
--- a/include/linux/kref.h
+++ b/include/linux/kref.h
@@ -19,6 +19,7 @@
 #include <linux/atomic.h>
 #include <linux/kernel.h>
 #include <linux/mutex.h>
+#include <linux/spinlock.h>
 
 struct kref {
 	atomic_t refcount;
@@ -98,6 +99,38 @@ static inline int kref_put(struct kref *kref, void (*release)(struct kref *kref)
 	return kref_sub(kref, 1, release);
 }
 
+/**
+ * kref_put_spinlock_irqsave - decrement refcount for object.
+ * @kref: object.
+ * @release: pointer to the function that will clean up the object when the
+ *	     last reference to the object is released.
+ *	     This pointer is required, and it is not acceptable to pass kfree
+ *	     in as this function.
+ * @lock: lock to take in release case
+ *
+ * Behaves identical to kref_put with one exception.  If the reference count
+ * drops to zero, the lock will be taken atomically wrt dropping the reference
+ * count.  The release function has to call spin_unlock() without _irqrestore.
+ */
+static inline int kref_put_spinlock_irqsave(struct kref *kref,
+		void (*release)(struct kref *kref),
+		spinlock_t *lock)
+{
+	unsigned long flags;
+
+	WARN_ON(release == NULL);
+	if (atomic_add_unless(&kref->refcount, -1, 1))
+		return 0;
+	spin_lock_irqsave(lock, flags);
+	if (atomic_dec_and_test(&kref->refcount)) {
+		release(kref);
+		local_irq_restore(flags);
+		return 1;
+	}
+	spin_unlock_irqrestore(lock, flags);
+	return 0;
+}
+
 static inline int kref_put_mutex(struct kref *kref,
 				 void (*release)(struct kref *kref),
 				 struct mutex *lock)
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index fb1bf7d6a410..0390d5943ed6 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -373,13 +373,11 @@ struct ab8500_sysctrl_platform_data;
 /**
  * struct ab8500_platform_data - AB8500 platform data
  * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
- * @pm_power_off: Should machine pm power off hook be registered or not
  * @init: board-specific initialization after detection of ab8500
  * @regulator: machine-specific constraints for regulators
  */
 struct ab8500_platform_data {
 	int irq_base;
-	bool pm_power_off;
 	void (*init) (struct ab8500 *);
 	struct ab8500_regulator_platform_data *regulator;
 	struct abx500_gpio_platform_data *gpio;
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index 67f46ad6920a..352eec9df1b8 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -126,7 +126,7 @@ struct mlx4_rss_context {
 
 struct mlx4_qp_path {
 	u8			fl;
-	u8			reserved1[1];
+	u8			vlan_control;
 	u8			disable_pkey_check;
 	u8			pkey_index;
 	u8			counter_index;
@@ -141,11 +141,32 @@ struct mlx4_qp_path {
 	u8			sched_queue;
 	u8			vlan_index;
 	u8			feup;
-	u8			reserved3;
+	u8			fvl_rx;
 	u8			reserved4[2];
 	u8			dmac[6];
 };
 
+enum { /* fl */
+	MLX4_FL_CV      = 1 << 6,
+	MLX4_FL_ETH_HIDE_CQE_VLAN       = 1 << 2
+};
+enum { /* vlan_control */
+	MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED	= 1 << 6,
+	MLX4_VLAN_CTRL_ETH_RX_BLOCK_TAGGED	= 1 << 2,
+	MLX4_VLAN_CTRL_ETH_RX_BLOCK_PRIO_TAGGED	= 1 << 1, /* 802.1p priority tag */
+	MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED	= 1 << 0
+};
+
+enum { /* feup */
+	MLX4_FEUP_FORCE_ETH_UP          = 1 << 6, /* force Eth UP */
+	MLX4_FSM_FORCE_ETH_SRC_MAC      = 1 << 5, /* force Source MAC */
+	MLX4_FVL_FORCE_ETH_VLAN         = 1 << 3  /* force Eth vlan */
+};
+
+enum { /* fvl_rx */
+	MLX4_FVL_RX_FORCE_ETH_VLAN      = 1 << 0 /* enforce Eth rx vlan */
+};
+
 struct mlx4_qp_context {
 	__be32			flags;
 	__be32			pd;
@@ -185,6 +206,10 @@ struct mlx4_qp_context {
 	u32			reserved5[10];
 };
 
+enum { /* param3 */
+	MLX4_STRIP_VLAN = 1 << 30
+};
+
 /* Which firmware version adds support for NEC (NoErrorCompletion) bit */
 #define MLX4_FW_VER_WQE_CTRL_NEC mlx4_fw_ver(2, 2, 232)
 
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index a94a5a0ab122..60584b185a0c 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2733,6 +2733,17 @@ static inline netdev_features_t netdev_get_wanted_features(
 }
 netdev_features_t netdev_increment_features(netdev_features_t all,
 	netdev_features_t one, netdev_features_t mask);
+
+/* Allow TSO being used on stacked device :
+ * Performing the GSO segmentation before last device
+ * is a performance improvement.
+ */
+static inline netdev_features_t netdev_add_tso_features(netdev_features_t features,
+							netdev_features_t mask)
+{
+	return netdev_increment_features(features, NETIF_F_ALL_TSO, mask);
+}
+
 int __netdev_update_features(struct net_device *dev);
 void netdev_update_features(struct net_device *dev);
 void netdev_change_features(struct net_device *dev);
diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h
index 3863a4dbdf18..2a93b64a3869 100644
--- a/include/linux/of_platform.h
+++ b/include/linux/of_platform.h
@@ -11,9 +11,10 @@
  *
  */
 
-#ifdef CONFIG_OF_DEVICE
 #include <linux/device.h>
 #include <linux/mod_devicetable.h>
+
+#ifdef CONFIG_OF_DEVICE
 #include <linux/pm.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
@@ -100,7 +101,7 @@ extern int of_platform_populate(struct device_node *root,
 
 #if !defined(CONFIG_OF_ADDRESS)
 struct of_dev_auxdata;
-struct device;
+struct device_node;
 static inline int of_platform_populate(struct device_node *root,
 					const struct of_device_id *matches,
 					const struct of_dev_auxdata *lookup,
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 81b31613eb25..170447977278 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -60,11 +60,13 @@ static inline void acpi_pci_slot_remove(struct pci_bus *bus) { }
 void acpiphp_init(void);
 void acpiphp_enumerate_slots(struct pci_bus *bus, acpi_handle handle);
 void acpiphp_remove_slots(struct pci_bus *bus);
+void acpiphp_check_host_bridge(acpi_handle handle);
 #else
 static inline void acpiphp_init(void) { }
 static inline void acpiphp_enumerate_slots(struct pci_bus *bus,
 					   acpi_handle handle) { }
 static inline void acpiphp_remove_slots(struct pci_bus *bus) { }
+static inline void acpiphp_check_host_bridge(acpi_handle handle) { }
 #endif
 
 #else	/* CONFIG_ACPI */
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 72474e18f1e0..6aa238096622 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -37,17 +37,17 @@
  *	if it is 0, pull-down is disabled.
  * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and
  *	low, this is the most typical case and is typically achieved with two
- *	active transistors on the output. Sending this config will enabale
+ *	active transistors on the output. Setting this config will enable
  *	push-pull mode, the argument is ignored.
  * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open
  *	collector) which means it is usually wired with other output ports
- *	which are then pulled up with an external resistor. Sending this
- *	config will enabale open drain mode, the argument is ignored.
+ *	which are then pulled up with an external resistor. Setting this
+ *	config will enable open drain mode, the argument is ignored.
  * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source
- *	(open emitter). Sending this config will enabale open drain mode, the
+ *	(open emitter). Setting this config will enable open drain mode, the
  *	argument is ignored.
- * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as
- * 	argument. The argument is in mA.
+ * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current
+ *	passed as argument. The argument is in mA.
  * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin.
  *      If the argument != 0, schmitt-trigger mode is enabled. If it's 0,
  *      schmitt-trigger mode is disabled.
diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/clk-lpss.h
index 528e73ce46d2..23901992b9dd 100644
--- a/include/linux/platform_data/clk-lpss.h
+++ b/include/linux/platform_data/clk-lpss.h
@@ -13,6 +13,11 @@
 #ifndef __CLK_LPSS_H
 #define __CLK_LPSS_H
 
+struct lpss_clk_data {
+	const char *name;
+	struct clk *clk;
+};
+
 extern int lpt_clk_init(void);
 
 #endif /* __CLK_LPSS_H */
diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h
index ff9b0aab5281..c860c1b314c0 100644
--- a/include/linux/platform_data/serial-omap.h
+++ b/include/linux/platform_data/serial-omap.h
@@ -43,8 +43,6 @@ struct omap_uart_port_info {
 	int			DTR_present;
 
 	int (*get_context_loss_count)(struct device *);
-	void (*set_forceidle)(struct device *);
-	void (*set_noidle)(struct device *);
 	void (*enable_wakeup)(struct device *, bool);
 };
 
diff --git a/include/linux/printk.h b/include/linux/printk.h
index 6af944ab38f0..22c7052e9372 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -4,6 +4,7 @@
 #include <stdarg.h>
 #include <linux/init.h>
 #include <linux/kern_levels.h>
+#include <linux/linkage.h>
 
 extern const char linux_banner[];
 extern const char linux_proc_banner[];
diff --git a/include/linux/rio.h b/include/linux/rio.h
index a3e784278667..18e099342e6f 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -83,7 +83,6 @@
 
 extern struct bus_type rio_bus_type;
 extern struct device rio_bus;
-extern struct list_head rio_devices;	/* list of all devices */
 
 struct rio_mport;
 struct rio_dev;
@@ -237,6 +236,7 @@ enum rio_phy_type {
  * @name: Port name string
  * @priv: Master port private data
  * @dma: DMA device associated with mport
+ * @nscan: RapidIO network enumeration/discovery operations
  */
 struct rio_mport {
 	struct list_head dbells;	/* list of doorbell events */
@@ -262,8 +262,14 @@ struct rio_mport {
 #ifdef CONFIG_RAPIDIO_DMA_ENGINE
 	struct dma_device	dma;
 #endif
+	struct rio_scan *nscan;
 };
 
+/*
+ * Enumeration/discovery control flags
+ */
+#define RIO_SCAN_ENUM_NO_WAIT	0x00000001 /* Do not wait for enum completed */
+
 struct rio_id_table {
 	u16 start;	/* logical minimal id */
 	u32 max;	/* max number of IDs in table */
@@ -460,6 +466,16 @@ static inline struct rio_mport *dma_to_mport(struct dma_device *ddev)
 }
 #endif /* CONFIG_RAPIDIO_DMA_ENGINE */
 
+/**
+ * struct rio_scan - RIO enumeration and discovery operations
+ * @enumerate: Callback to perform RapidIO fabric enumeration.
+ * @discover: Callback to perform RapidIO fabric discovery.
+ */
+struct rio_scan {
+	int (*enumerate)(struct rio_mport *mport, u32 flags);
+	int (*discover)(struct rio_mport *mport, u32 flags);
+};
+
 /* Architecture and hardware-specific functions */
 extern int rio_register_mport(struct rio_mport *);
 extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int);
diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h
index b75c05920ab5..5059994fe297 100644
--- a/include/linux/rio_drv.h
+++ b/include/linux/rio_drv.h
@@ -433,5 +433,6 @@ extern u16 rio_local_get_device_id(struct rio_mport *port);
 extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from);
 extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did,
 				   struct rio_dev *from);
+extern int rio_init_mports(void);
 
 #endif				/* LINUX_RIO_DRV_H */
diff --git a/include/linux/socket.h b/include/linux/socket.h
index 428c37a1f95c..33bf2dfab19d 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -305,7 +305,6 @@ struct ucred {
 
 extern void cred_to_ucred(struct pid *pid, const struct cred *cred, struct ucred *ucred);
 
-extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
 extern int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
 			       int offset, int len);
 extern int csum_partial_copy_fromiovecend(unsigned char *kdata, 
@@ -314,7 +313,6 @@ extern int csum_partial_copy_fromiovecend(unsigned char *kdata,
 					  unsigned int len, __wsum *csump);
 
 extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr_storage *address, int mode);
-extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len);
 extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata,
 			     int offset, int len);
 extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr_storage *kaddr);
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 733eb5ee31c5..6ff26c8db7b9 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -57,7 +57,7 @@ extern struct bus_type spi_bus_type;
  * @modalias: Name of the driver to use with this device, or an alias
  *	for that name.  This appears in the sysfs "modalias" attribute
  *	for driver coldplugging, and in uevents used for hotplugging
- * @cs_gpio: gpio number of the chipselect line (optional, -EINVAL when
+ * @cs_gpio: gpio number of the chipselect line (optional, -ENOENT when
  *	when not using a GPIO line)
  *
  * A @spi_device is used to interchange data between an SPI slave
@@ -266,7 +266,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  *	queue so the subsystem notifies the driver that it may relax the
  *	hardware by issuing this call
  * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
- *	number. Any individual value may be -EINVAL for CS lines that
+ *	number. Any individual value may be -ENOENT for CS lines that
  *	are not GPIOs (driven by the SPI controller itself).
  *
  * Each SPI master controller can communicate with one or more @spi_device
diff --git a/include/linux/time.h b/include/linux/time.h
index 22d81b3c955b..d5d229b2e5af 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -117,14 +117,10 @@ static inline bool timespec_valid_strict(const struct timespec *ts)
 
 extern bool persistent_clock_exist;
 
-#ifdef ALWAYS_USE_PERSISTENT_CLOCK
-#define has_persistent_clock()	true
-#else
 static inline bool has_persistent_clock(void)
 {
 	return persistent_clock_exist;
 }
-#endif
 
 extern void read_persistent_clock(struct timespec *ts);
 extern void read_boot_clock(struct timespec *ts);
diff --git a/include/linux/uio.h b/include/linux/uio.h
index 629aaf51f30b..c55ce243cc09 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -35,4 +35,7 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs)
 }
 
 unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
+
+int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
+int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len);
 #endif
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index c454a88abf2e..f1b0dca60f12 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -563,9 +563,8 @@ static inline int gadget_is_dualspeed(struct usb_gadget *g)
 }
 
 /**
- * gadget_is_superspeed() - return true if the hardware handles
- * supperspeed
- * @g: controller that might support supper speed
+ * gadget_is_superspeed() - return true if the hardware handles superspeed
+ * @g: controller that might support superspeed
  */
 static inline int gadget_is_superspeed(struct usb_gadget *g)
 {
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index b9b0f7b4e43b..302ddf55d2da 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -268,6 +268,8 @@ struct usb_serial_driver {
 			struct usb_serial_port *port, struct ktermios *old);
 	void (*break_ctl)(struct tty_struct *tty, int break_state);
 	int  (*chars_in_buffer)(struct tty_struct *tty);
+	void (*wait_until_sent)(struct tty_struct *tty, long timeout);
+	bool (*tx_empty)(struct usb_serial_port *port);
 	void (*throttle)(struct tty_struct *tty);
 	void (*unthrottle)(struct tty_struct *tty);
 	int  (*tiocmget)(struct tty_struct *tty);
@@ -327,6 +329,8 @@ extern void usb_serial_generic_close(struct usb_serial_port *port);
 extern int usb_serial_generic_resume(struct usb_serial *serial);
 extern int usb_serial_generic_write_room(struct tty_struct *tty);
 extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
+extern void usb_serial_generic_wait_until_sent(struct tty_struct *tty,
+								long timeout);
 extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
 extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
 extern void usb_serial_generic_throttle(struct tty_struct *tty);
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index e8d65718560b..0d33fca48774 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -36,7 +36,7 @@ extern int fg_console, last_console, want_console;
 int vc_allocate(unsigned int console);
 int vc_cons_allocated(unsigned int console);
 int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines);
-void vc_deallocate(unsigned int console);
+struct vc_data *vc_deallocate(unsigned int console);
 void reset_palette(struct vc_data *vc);
 void do_blank_screen(int entering_gfx);
 void do_unblank_screen(int leaving_gfx);
diff --git a/include/linux/wait.h b/include/linux/wait.h
index ac38be2692d8..1133695eb067 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -217,6 +217,8 @@ do {									\
 		if (!ret)						\
 			break;						\
 	}								\
+	if (!ret && (condition))					\
+		ret = 1;						\
 	finish_wait(&wq, &__wait);					\
 } while (0)
 
@@ -233,8 +235,9 @@ do {									\
  * wake_up() has to be called after changing any variable that could
  * change the result of the wait condition.
  *
- * The function returns 0 if the @timeout elapsed, and the remaining
- * jiffies if the condition evaluated to true before the timeout elapsed.
+ * The function returns 0 if the @timeout elapsed, or the remaining
+ * jiffies (at least 1) if the @condition evaluated to %true before
+ * the @timeout elapsed.
  */
 #define wait_event_timeout(wq, condition, timeout)			\
 ({									\
@@ -302,6 +305,8 @@ do {									\
 		ret = -ERESTARTSYS;					\
 		break;							\
 	}								\
+	if (!ret && (condition))					\
+		ret = 1;						\
 	finish_wait(&wq, &__wait);					\
 } while (0)
 
@@ -318,9 +323,10 @@ do {									\
  * wake_up() has to be called after changing any variable that could
  * change the result of the wait condition.
  *
- * The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it
- * was interrupted by a signal, and the remaining jiffies otherwise
- * if the condition evaluated to true before the timeout elapsed.
+ * Returns:
+ * 0 if the @timeout elapsed, -%ERESTARTSYS if it was interrupted by
+ * a signal, or the remaining jiffies (at least 1) if the @condition
+ * evaluated to %true before the @timeout elapsed.
  */
 #define wait_event_interruptible_timeout(wq, condition, timeout)	\
 ({									\