Merge remote-tracking branch 'airlied/drm-fixes' into drm-intel-next-queued

Back-merge from drm-fixes into drm-intel-next to sort out two things:

- interlaced support: -fixes contains a bugfix to correctly clear
  interlaced configuration bits in case the bios sets up an interlaced
  mode and we want to set up the progressive mode (current kernels
  don't support interlaced). The actual feature work to support
  interlaced depends upon (and conflicts with) this bugfix.

- forcewake voodoo to workaround missed IRQ issues: -fixes only enabled
  this for ivybridge, but some recent bug reports indicate that we
  need this on Sandybridge, too. But in a slightly different flavour
  and with other fixes and reworks on top. Additionally there are some
  forcewake cleanup patches heading to -next that would conflict with
  currrent -fixes.

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

3 files changed, 67 insertions, 2 deletions

diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h
new file mode 100644
index 000000000000..b081c7245ec8
--- /dev/null
+++ b/include/linux/platform_data/macb.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACB_PDATA_H__
+#define __MACB_PDATA_H__
+
+struct macb_platform_data {
+	u32		phy_mask;
+	int		phy_irq_pin;	/* PHY IRQ */
+	u8		is_rmii;	/* using RMII interface? */
+};
+
+#endif /* __MACB_PDATA_H__ */
diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h
index e9d9149ddf38..d94804aca764 100644
--- a/include/linux/platform_data/mv_usb.h
+++ b/include/linux/platform_data/mv_usb.h
@@ -42,9 +42,23 @@ struct mv_usb_platform_data {
 	/* only valid for HCD. OTG or Host only*/
 	unsigned int		mode;
 
-	int     (*phy_init)(unsigned int regbase);
-	void    (*phy_deinit)(unsigned int regbase);
+	/* This flag is used for that needs id pin checked by otg */
+	unsigned int    disable_otg_clock_gating:1;
+	/* Force a_bus_req to be asserted */
+	 unsigned int    otg_force_a_bus_req:1;
+
+	int	(*phy_init)(void __iomem *regbase);
+	void	(*phy_deinit)(void __iomem *regbase);
 	int	(*set_vbus)(unsigned int vbus);
+	int     (*private_init)(void __iomem *opregs, void __iomem *phyregs);
 };
 
+#ifndef CONFIG_HAVE_CLK
+/* Dummy stub for clk framework */
+#define clk_get(dev, id)       NULL
+#define clk_put(clock)         do {} while (0)
+#define clk_enable(clock)      do {} while (0)
+#define clk_disable(clock)     do {} while (0)
+#endif
+
 #endif
diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h
new file mode 100644
index 000000000000..6fa109339bf9
--- /dev/null
+++ b/include/linux/platform_data/s3c-hsudc.h
@@ -0,0 +1,34 @@
+/*
+ * S3C24XX USB 2.0 High-speed USB controller gadget driver
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints.
+ * Each endpoint can be configured as either in or out endpoint. Endpoints
+ * can be configured for Bulk or Interrupt transfer mode.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __LINUX_USB_S3C_HSUDC_H
+#define __LINUX_USB_S3C_HSUDC_H
+
+/**
+ * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller.
+ * @epnum: Number of endpoints to be instantiated by the controller driver.
+ * @gpio_init: Platform specific USB related GPIO initialization.
+ * @gpio_uninit: Platform specific USB releted GPIO uninitialzation.
+ *
+ * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget
+ * controllers.
+ */
+struct s3c24xx_hsudc_platdata {
+	unsigned int	epnum;
+	void		(*gpio_init)(void);
+	void		(*gpio_uninit)(void);
+};
+
+#endif	/* __LINUX_USB_S3C_HSUDC_H */