Merge branch 'next' into for-linus

Merge first round of changes for 3.13 merge window.

51 files changed, 980 insertions, 413 deletions

diff --git a/include/linux/platform_data/ad7303.h b/include/linux/platform_data/ad7303.h
new file mode 100644
index 000000000000..de6a7a6b4bbf
--- /dev/null
+++ b/include/linux/platform_data/ad7303.h
@@ -0,0 +1,21 @@
+/*
+ * Analog Devices AD7303 DAC driver
+ *
+ * Copyright 2013 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __IIO_ADC_AD7303_H__
+#define __IIO_ADC_AD7303_H__
+
+/**
+ * struct ad7303_platform_data - AD7303 platform data
+ * @use_external_ref: If set to true use an external voltage reference connected
+ * to the REF pin, otherwise use the internal reference derived from Vdd.
+ */
+struct ad7303_platform_data {
+	bool use_external_ref;
+};
+
+#endif
diff --git a/include/linux/platform_data/asoc-s3c.h b/include/linux/platform_data/asoc-s3c.h
index 88272591a895..9efc04dd255a 100644
--- a/include/linux/platform_data/asoc-s3c.h
+++ b/include/linux/platform_data/asoc-s3c.h
@@ -36,6 +36,7 @@ struct samsung_i2s {
  */
 #define QUIRK_NO_MUXPSR		(1 << 2)
 #define QUIRK_NEED_RSTCLR	(1 << 3)
+#define QUIRK_SUPPORTS_TDM	(1 << 4)
 	/* Quirks of the I2S controller */
 	u32 quirks;
 	dma_addr_t idma_addr;
diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h
index e15745b4f3a5..b3ca1e94e0c8 100644
--- a/include/linux/platform_data/at91_adc.h
+++ b/include/linux/platform_data/at91_adc.h
@@ -14,12 +14,16 @@
 			(Interruptions registers mostly)
  * @status_register:	Offset of the Interrupt Status Register
  * @trigger_register:	Offset of the Trigger setup register
+ * @mr_prescal_mask:	Mask of the PRESCAL field in the adc MR register
+ * @mr_startup_mask:	Mask of the STARTUP field in the adc MR register
  */
 struct at91_adc_reg_desc {
 	u8	channel_base;
 	u32	drdy_mask;
 	u8	status_register;
 	u8	trigger_register;
+	u32	mr_prescal_mask;
+	u32	mr_startup_mask;
 };
 
 /**
diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h
index 6a293b7fff3b..cea9f70133c5 100644
--- a/include/linux/platform_data/atmel.h
+++ b/include/linux/platform_data/atmel.h
@@ -71,6 +71,10 @@ struct atmel_nand_data {
 	u8		on_flash_bbt;		/* bbt on flash */
 	struct mtd_partition *parts;
 	unsigned int	num_parts;
+	bool		has_dma;		/* support dma transfer */
+
+	/* default is false, only for at32ap7000 chip is true */
+	bool		need_reset_workaround;
 };
 
  /* Serial */
diff --git a/include/linux/platform_data/bd6107.h b/include/linux/platform_data/bd6107.h
new file mode 100644
index 000000000000..671d6502d241
--- /dev/null
+++ b/include/linux/platform_data/bd6107.h
@@ -0,0 +1,19 @@
+/*
+ * bd6107.h - Rohm BD6107 LEDs Driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __BD6107_H__
+#define __BD6107_H__
+
+struct device;
+
+struct bd6107_platform_data {
+	struct device *fbdev;
+	int reset;			/* Reset GPIO */
+	unsigned int def_value;
+};
+
+#endif
diff --git a/include/linux/platform_data/brcmfmac-sdio.h b/include/linux/platform_data/brcmfmac-sdio.h
index 1ade657d5fc1..e75dcbf2b230 100644
--- a/include/linux/platform_data/brcmfmac-sdio.h
+++ b/include/linux/platform_data/brcmfmac-sdio.h
@@ -90,6 +90,14 @@ void __init brcmfmac_init_pdata(void)
  * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are
  * used for registering the irq using request_irq function.
  *
+ * broken_sg_support: flag for broken sg list support of SDIO host controller.
+ * Set this to true if the SDIO host controller has higher align requirement
+ * than 32 bytes for each scatterlist item.
+ *
+ * sd_head_align: alignment requirement for start of data buffer
+ *
+ * sd_sgentry_align: length alignment requirement for each sg entry
+ *
  * power_on: This function is called by the brcmfmac when the module gets
  * loaded. This can be particularly useful for low power devices. The platform
  * spcific routine may for example decide to power up the complete device.
@@ -116,6 +124,9 @@ struct brcmfmac_sdio_platform_data {
 	bool oob_irq_supported;
 	unsigned int oob_irq_nr;
 	unsigned long oob_irq_flags;
+	bool broken_sg_support;
+	unsigned short sd_head_align;
+	unsigned short sd_sgentry_align;
 	void (*power_on)(void);
 	void (*power_off)(void);
 	void (*reset)(void);
diff --git a/include/linux/platform_data/camera-mx3.h b/include/linux/platform_data/camera-mx3.h
index f226ee3777e1..a910dadc8258 100644
--- a/include/linux/platform_data/camera-mx3.h
+++ b/include/linux/platform_data/camera-mx3.h
@@ -33,6 +33,8 @@
 #define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \
 				   MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15)
 
+struct v4l2_async_subdev;
+
 /**
  * struct mx3_camera_pdata - i.MX3x camera platform data
  * @flags:	MX3_CAMERA_* flags
@@ -43,6 +45,8 @@ struct mx3_camera_pdata {
 	unsigned long flags;
 	unsigned long mclk_10khz;
 	struct device *dma_dev;
+	struct v4l2_async_subdev **asd;	/* Flat array, arranged in groups */
+	int *asd_sizes;			/* 0-terminated array of asd group sizes */
 };
 
 #endif
diff --git a/include/linux/platform_data/camera-rcar.h b/include/linux/platform_data/camera-rcar.h
new file mode 100644
index 000000000000..dfc83c581593
--- /dev/null
+++ b/include/linux/platform_data/camera-rcar.h
@@ -0,0 +1,25 @@
+/*
+ * Platform data for Renesas R-Car VIN soc-camera driver
+ *
+ * Copyright (C) 2011-2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __CAMERA_RCAR_H_
+#define __CAMERA_RCAR_H_
+
+#define RCAR_VIN_HSYNC_ACTIVE_LOW	(1 << 0)
+#define RCAR_VIN_VSYNC_ACTIVE_LOW	(1 << 1)
+#define RCAR_VIN_BT601			(1 << 2)
+#define RCAR_VIN_BT656			(1 << 3)
+
+struct rcar_vin_platform_data {
+	unsigned int flags;
+};
+
+#endif /* __CAMERA_RCAR_H_ */
diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h
index 320d9c39ea0a..9d98f3aaa16c 100644
--- a/include/linux/platform_data/clk-ux500.h
+++ b/include/linux/platform_data/clk-ux500.h
@@ -12,7 +12,9 @@
 
 void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
 		    u32 clkrst5_base, u32 clkrst6_base);
-void u9540_clk_init(void);
-void u8540_clk_init(void);
+void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
+		    u32 clkrst5_base, u32 clkrst6_base);
+void u8540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
+		    u32 clkrst5_base, u32 clkrst6_base);
 
 #endif /* __CLK_UX500_H */
diff --git a/include/linux/platform_data/cpsw.h b/include/linux/platform_data/cpsw.h
deleted file mode 100644
index bb3cd58d71e3..000000000000
--- a/include/linux/platform_data/cpsw.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Texas Instruments Ethernet Switch Driver
- *
- * Copyright (C) 2012 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __CPSW_H__
-#define __CPSW_H__
-
-#include <linux/if_ether.h>
-
-struct cpsw_slave_data {
-	char		phy_id[MII_BUS_ID_SIZE];
-	int		phy_if;
-	u8		mac_addr[ETH_ALEN];
-	u16		dual_emac_res_vlan;	/* Reserved VLAN for DualEMAC */
-
-};
-
-struct cpsw_platform_data {
-	u32	ss_reg_ofs;	/* Subsystem control register offset */
-	u32	channels;	/* number of cpdma channels (symmetric) */
-	u32	slaves;		/* number of slave cpgmac ports */
-	struct cpsw_slave_data	*slave_data;
-	u32	active_slave; /* time stamping, ethtool and SIOCGMIIPHY slave */
-	u32	cpts_clock_mult;  /* convert input clock ticks to nanoseconds */
-	u32	cpts_clock_shift; /* convert input clock ticks to nanoseconds */
-	u32	ale_entries;	/* ale table size */
-	u32	bd_ram_size;  /*buffer descriptor ram size */
-	u32	rx_descs;	/* Number of Rx Descriptios */
-	u32	mac_control;	/* Mac control register */
-	u16	default_vlan;	/* Def VLAN for ALE lookup in VLAN aware mode*/
-	bool	dual_emac;	/* Enable Dual EMAC mode */
-};
-
-#endif /* __CPSW_H__ */
diff --git a/include/linux/platform_data/dma-atmel.h b/include/linux/platform_data/dma-atmel.h
index cab0997be3de..e95f19c65873 100644
--- a/include/linux/platform_data/dma-atmel.h
+++ b/include/linux/platform_data/dma-atmel.h
@@ -35,16 +35,20 @@ struct at_dma_slave {
 
 
 /* Platform-configurable bits in CFG */
+#define ATC_PER_MSB(h)	((0x30U & (h)) >> 4)	/* Extract most significant bits of a handshaking identifier */
+
 #define	ATC_SRC_PER(h)		(0xFU & (h))	/* Channel src rq associated with periph handshaking ifc h */
 #define	ATC_DST_PER(h)		((0xFU & (h)) <<  4)	/* Channel dst rq associated with periph handshaking ifc h */
 #define	ATC_SRC_REP		(0x1 <<  8)	/* Source Replay Mod */
 #define	ATC_SRC_H2SEL		(0x1 <<  9)	/* Source Handshaking Mod */
 #define		ATC_SRC_H2SEL_SW	(0x0 <<  9)
 #define		ATC_SRC_H2SEL_HW	(0x1 <<  9)
+#define	ATC_SRC_PER_MSB(h)	(ATC_PER_MSB(h) << 10)	/* Channel src rq (most significant bits) */
 #define	ATC_DST_REP		(0x1 << 12)	/* Destination Replay Mod */
 #define	ATC_DST_H2SEL		(0x1 << 13)	/* Destination Handshaking Mod */
 #define		ATC_DST_H2SEL_SW	(0x0 << 13)
 #define		ATC_DST_H2SEL_HW	(0x1 << 13)
+#define	ATC_DST_PER_MSB(h)	(ATC_PER_MSB(h) << 14)	/* Channel dst rq (most significant bits) */
 #define	ATC_SOD			(0x1 << 16)	/* Stop On Done */
 #define	ATC_LOCK_IF		(0x1 << 20)	/* Interface Lock */
 #define	ATC_LOCK_B		(0x1 << 21)	/* AHB Bus Lock */
diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h
index f6d30cc1cb77..beac6b8b6a7b 100644
--- a/include/linux/platform_data/dma-imx.h
+++ b/include/linux/platform_data/dma-imx.h
@@ -60,10 +60,8 @@ static inline int imx_dma_is_ipu(struct dma_chan *chan)
 
 static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
 {
-	return strstr(dev_name(chan->device->dev), "sdma") ||
-		!strcmp(dev_name(chan->device->dev), "imx1-dma") ||
-		!strcmp(dev_name(chan->device->dev), "imx21-dma") ||
-		!strcmp(dev_name(chan->device->dev), "imx27-dma");
+	return !strcmp(chan->device->dev->driver->name, "imx-sdma") ||
+		!strcmp(chan->device->dev->driver->name, "imx-dma");
 }
 
 #endif
diff --git a/include/linux/platform_data/dma-rcar-hpbdma.h b/include/linux/platform_data/dma-rcar-hpbdma.h
new file mode 100644
index 000000000000..648b8ea61a22
--- /dev/null
+++ b/include/linux/platform_data/dma-rcar-hpbdma.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2011-2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef __DMA_RCAR_HPBDMA_H
+#define __DMA_RCAR_HPBDMA_H
+
+#include <linux/bitops.h>
+#include <linux/types.h>
+
+/* Transmit sizes and respective register values */
+enum {
+	XMIT_SZ_8BIT	= 0,
+	XMIT_SZ_16BIT	= 1,
+	XMIT_SZ_32BIT	= 2,
+	XMIT_SZ_MAX
+};
+
+/* DMA control register (DCR) bits */
+#define HPB_DMAE_DCR_DTAMD		(1u << 26)
+#define HPB_DMAE_DCR_DTAC		(1u << 25)
+#define HPB_DMAE_DCR_DTAU		(1u << 24)
+#define HPB_DMAE_DCR_DTAU1		(1u << 23)
+#define HPB_DMAE_DCR_SWMD		(1u << 22)
+#define HPB_DMAE_DCR_BTMD		(1u << 21)
+#define HPB_DMAE_DCR_PKMD		(1u << 20)
+#define HPB_DMAE_DCR_CT			(1u << 18)
+#define HPB_DMAE_DCR_ACMD		(1u << 17)
+#define HPB_DMAE_DCR_DIP		(1u << 16)
+#define HPB_DMAE_DCR_SMDL		(1u << 13)
+#define HPB_DMAE_DCR_SPDAM		(1u << 12)
+#define HPB_DMAE_DCR_SDRMD_MASK		(3u << 10)
+#define HPB_DMAE_DCR_SDRMD_MOD		(0u << 10)
+#define HPB_DMAE_DCR_SDRMD_AUTO		(1u << 10)
+#define HPB_DMAE_DCR_SDRMD_TIMER	(2u << 10)
+#define HPB_DMAE_DCR_SPDS_MASK		(3u << 8)
+#define HPB_DMAE_DCR_SPDS_8BIT		(0u << 8)
+#define HPB_DMAE_DCR_SPDS_16BIT		(1u << 8)
+#define HPB_DMAE_DCR_SPDS_32BIT		(2u << 8)
+#define HPB_DMAE_DCR_DMDL		(1u << 5)
+#define HPB_DMAE_DCR_DPDAM		(1u << 4)
+#define HPB_DMAE_DCR_DDRMD_MASK		(3u << 2)
+#define HPB_DMAE_DCR_DDRMD_MOD		(0u << 2)
+#define HPB_DMAE_DCR_DDRMD_AUTO		(1u << 2)
+#define HPB_DMAE_DCR_DDRMD_TIMER	(2u << 2)
+#define HPB_DMAE_DCR_DPDS_MASK		(3u << 0)
+#define HPB_DMAE_DCR_DPDS_8BIT		(0u << 0)
+#define HPB_DMAE_DCR_DPDS_16BIT		(1u << 0)
+#define HPB_DMAE_DCR_DPDS_32BIT		(2u << 0)
+
+/* Asynchronous reset register (ASYNCRSTR) bits */
+#define HPB_DMAE_ASYNCRSTR_ASRST41	BIT(10)
+#define HPB_DMAE_ASYNCRSTR_ASRST40	BIT(9)
+#define HPB_DMAE_ASYNCRSTR_ASRST39	BIT(8)
+#define HPB_DMAE_ASYNCRSTR_ASRST27	BIT(7)
+#define HPB_DMAE_ASYNCRSTR_ASRST26	BIT(6)
+#define HPB_DMAE_ASYNCRSTR_ASRST25	BIT(5)
+#define HPB_DMAE_ASYNCRSTR_ASRST24	BIT(4)
+#define HPB_DMAE_ASYNCRSTR_ASRST23	BIT(3)
+#define HPB_DMAE_ASYNCRSTR_ASRST22	BIT(2)
+#define HPB_DMAE_ASYNCRSTR_ASRST21	BIT(1)
+#define HPB_DMAE_ASYNCRSTR_ASRST20	BIT(0)
+
+struct hpb_dmae_slave_config {
+	unsigned int	id;
+	dma_addr_t	addr;
+	u32		dcr;
+	u32		port;
+	u32		rstr;
+	u32		mdr;
+	u32		mdm;
+	u32		flags;
+#define	HPB_DMAE_SET_ASYNC_RESET	BIT(0)
+#define	HPB_DMAE_SET_ASYNC_MODE		BIT(1)
+	u32		dma_ch;
+};
+
+#define HPB_DMAE_CHANNEL(_irq, _s_id)	\
+{					\
+	.ch_irq		= _irq,		\
+	.s_id		= _s_id,	\
+}
+
+struct hpb_dmae_channel {
+	unsigned int	ch_irq;
+	unsigned int	s_id;
+};
+
+struct hpb_dmae_pdata {
+	const struct hpb_dmae_slave_config *slaves;
+	int num_slaves;
+	const struct hpb_dmae_channel *channels;
+	int num_channels;
+	const unsigned int ts_shift[XMIT_SZ_MAX];
+	int num_hw_channels;
+};
+
+#endif
diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h
index 4b781014b0a0..1bb9b1852256 100644
--- a/include/linux/platform_data/dma-ste-dma40.h
+++ b/include/linux/platform_data/dma-ste-dma40.h
@@ -70,23 +70,8 @@ enum stedma40_flow_ctrl {
 	STEDMA40_FLOW_CTRL,
 };
 
-enum stedma40_periph_data_width {
-	STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
-	STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
-	STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
-	STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
-};
-
-enum stedma40_xfer_dir {
-	STEDMA40_MEM_TO_MEM = 1,
-	STEDMA40_MEM_TO_PERIPH,
-	STEDMA40_PERIPH_TO_MEM,
-	STEDMA40_PERIPH_TO_PERIPH
-};
-
-
 /**
- * struct stedma40_chan_cfg - dst/src channel configuration
+ * struct stedma40_half_channel_info - dst/src channel configuration
  *
  * @big_endian: true if the src/dst should be read as big endian
  * @data_width: Data width of the src/dst hardware
@@ -95,7 +80,7 @@ enum stedma40_xfer_dir {
  */
 struct stedma40_half_channel_info {
 	bool big_endian;
-	enum stedma40_periph_data_width data_width;
+	enum dma_slave_buswidth data_width;
 	int psize;
 	enum stedma40_flow_ctrl flow_ctrl;
 };
@@ -109,8 +94,7 @@ struct stedma40_half_channel_info {
  * version 3+, i.e DB8500v2+
  * @mode: channel mode: physical, logical, or operation
  * @mode_opt: options for the chosen channel mode
- * @src_dev_type: Src device type
- * @dst_dev_type: Dst device type
+ * @dev_type: src/dst device type (driver uses dir to figure out which)
  * @src_info: Parameters for dst half channel
  * @dst_info: Parameters for dst half channel
  * @use_fixed_channel: if true, use physical channel specified by phy_channel
@@ -121,13 +105,12 @@ struct stedma40_half_channel_info {
  *
  */
 struct stedma40_chan_cfg {
-	enum stedma40_xfer_dir			 dir;
+	enum dma_transfer_direction		 dir;
 	bool					 high_priority;
 	bool					 realtime;
 	enum stedma40_mode			 mode;
 	enum stedma40_mode_opt			 mode_opt;
-	int					 src_dev_type;
-	int					 dst_dev_type;
+	int					 dev_type;
 	struct stedma40_half_channel_info	 src_info;
 	struct stedma40_half_channel_info	 dst_info;
 
@@ -138,13 +121,8 @@ struct stedma40_chan_cfg {
 /**
  * struct stedma40_platform_data - Configuration struct for the dma device.
  *
- * @dev_len: length of dev_tx and dev_rx
  * @dev_tx: mapping between destination event line and io address
  * @dev_rx: mapping between source event line and io address
- * @memcpy: list of memcpy event lines
- * @memcpy_len: length of memcpy
- * @memcpy_conf_phy: default configuration of physical channel memcpy
- * @memcpy_conf_log: default configuration of logical channel memcpy
  * @disabled_channels: A vector, ending with -1, that marks physical channels
  * that are for different reasons not available for the driver.
  * @soft_lli_chans: A vector, that marks physical channels will use LLI by SW
@@ -154,22 +132,17 @@ struct stedma40_chan_cfg {
  * @num_of_soft_lli_chans: The number of channels that needs to be configured
  * to use SoftLLI.
  * @use_esram_lcla: flag for mapping the lcla into esram region
+ * @num_of_memcpy_chans: The number of channels reserved for memcpy.
  * @num_of_phy_chans: The number of physical channels implemented in HW.
  * 0 means reading the number of channels from DMA HW but this is only valid
  * for 'multiple of 4' channels, like 8.
  */
 struct stedma40_platform_data {
-	u32				 dev_len;
-	const dma_addr_t		*dev_tx;
-	const dma_addr_t		*dev_rx;
-	int				*memcpy;
-	u32				 memcpy_len;
-	struct stedma40_chan_cfg	*memcpy_conf_phy;
-	struct stedma40_chan_cfg	*memcpy_conf_log;
 	int				 disabled_channels[STEDMA40_MAX_PHYS];
 	int				*soft_lli_chans;
 	int				 num_of_soft_lli_chans;
 	bool				 use_esram_lcla;
+	int				 num_of_memcpy_chans;
 	int				 num_of_phy_chans;
 };
 
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
new file mode 100644
index 000000000000..179fb91bb5f2
--- /dev/null
+++ b/include/linux/platform_data/edma.h
@@ -0,0 +1,185 @@
+/*
+ *  TI EDMA definitions
+ *
+ *  Copyright (C) 2006-2013 Texas Instruments.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+/*
+ * This EDMA3 programming framework exposes two basic kinds of resource:
+ *
+ *  Channel	Triggers transfers, usually from a hardware event but
+ *		also manually or by "chaining" from DMA completions.
+ *		Each channel is coupled to a Parameter RAM (PaRAM) slot.
+ *
+ *  Slot	Each PaRAM slot holds a DMA transfer descriptor (PaRAM
+ *		"set"), source and destination addresses, a link to a
+ *		next PaRAM slot (if any), options for the transfer, and
+ *		instructions for updating those addresses.  There are
+ *		more than twice as many slots as event channels.
+ *
+ * Each PaRAM set describes a sequence of transfers, either for one large
+ * buffer or for several discontiguous smaller buffers.  An EDMA transfer
+ * is driven only from a channel, which performs the transfers specified
+ * in its PaRAM slot until there are no more transfers.  When that last
+ * transfer completes, the "link" field may be used to reload the channel's
+ * PaRAM slot with a new transfer descriptor.
+ *
+ * The EDMA Channel Controller (CC) maps requests from channels into physical
+ * Transfer Controller (TC) requests when the channel triggers (by hardware
+ * or software events, or by chaining).  The two physical DMA channels provided
+ * by the TCs are thus shared by many logical channels.
+ *
+ * DaVinci hardware also has a "QDMA" mechanism which is not currently
+ * supported through this interface.  (DSP firmware uses it though.)
+ */
+
+#ifndef EDMA_H_
+#define EDMA_H_
+
+/* PaRAM slots are laid out like this */
+struct edmacc_param {
+	unsigned int opt;
+	unsigned int src;
+	unsigned int a_b_cnt;
+	unsigned int dst;
+	unsigned int src_dst_bidx;
+	unsigned int link_bcntrld;
+	unsigned int src_dst_cidx;
+	unsigned int ccnt;
+};
+
+/* fields in edmacc_param.opt */
+#define SAM		BIT(0)
+#define DAM		BIT(1)
+#define SYNCDIM		BIT(2)
+#define STATIC		BIT(3)
+#define EDMA_FWID	(0x07 << 8)
+#define TCCMODE		BIT(11)
+#define EDMA_TCC(t)	((t) << 12)
+#define TCINTEN		BIT(20)
+#define ITCINTEN	BIT(21)
+#define TCCHEN		BIT(22)
+#define ITCCHEN		BIT(23)
+
+/*ch_status paramater of callback function possible values*/
+#define DMA_COMPLETE 1
+#define DMA_CC_ERROR 2
+#define DMA_TC1_ERROR 3
+#define DMA_TC2_ERROR 4
+
+enum address_mode {
+	INCR = 0,
+	FIFO = 1
+};
+
+enum fifo_width {
+	W8BIT = 0,
+	W16BIT = 1,
+	W32BIT = 2,
+	W64BIT = 3,
+	W128BIT = 4,
+	W256BIT = 5
+};
+
+enum dma_event_q {
+	EVENTQ_0 = 0,
+	EVENTQ_1 = 1,
+	EVENTQ_2 = 2,
+	EVENTQ_3 = 3,
+	EVENTQ_DEFAULT = -1
+};
+
+enum sync_dimension {
+	ASYNC = 0,
+	ABSYNC = 1
+};
+
+#define EDMA_CTLR_CHAN(ctlr, chan)	(((ctlr) << 16) | (chan))
+#define EDMA_CTLR(i)			((i) >> 16)
+#define EDMA_CHAN_SLOT(i)		((i) & 0xffff)
+
+#define EDMA_CHANNEL_ANY		-1	/* for edma_alloc_channel() */
+#define EDMA_SLOT_ANY			-1	/* for edma_alloc_slot() */
+#define EDMA_CONT_PARAMS_ANY		 1001
+#define EDMA_CONT_PARAMS_FIXED_EXACT	 1002
+#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
+
+#define EDMA_MAX_CC               2
+
+/* alloc/free DMA channels and their dedicated parameter RAM slots */
+int edma_alloc_channel(int channel,
+	void (*callback)(unsigned channel, u16 ch_status, void *data),
+	void *data, enum dma_event_q);
+void edma_free_channel(unsigned channel);
+
+/* alloc/free parameter RAM slots */
+int edma_alloc_slot(unsigned ctlr, int slot);
+void edma_free_slot(unsigned slot);
+
+/* alloc/free a set of contiguous parameter RAM slots */
+int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count);
+int edma_free_cont_slots(unsigned slot, int count);
+
+/* calls that operate on part of a parameter RAM slot */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+				enum address_mode mode, enum fifo_width);
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+				 enum address_mode mode, enum fifo_width);
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
+void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
+		u16 bcnt_rld, enum sync_dimension sync_mode);
+void edma_link(unsigned from, unsigned to);
+void edma_unlink(unsigned from);
+
+/* calls that operate on an entire parameter RAM slot */
+void edma_write_slot(unsigned slot, const struct edmacc_param *params);
+void edma_read_slot(unsigned slot, struct edmacc_param *params);
+
+/* channel control operations */
+int edma_start(unsigned channel);
+void edma_stop(unsigned channel);
+void edma_clean_channel(unsigned channel);
+void edma_clear_event(unsigned channel);
+void edma_pause(unsigned channel);
+void edma_resume(unsigned channel);
+
+struct edma_rsv_info {
+
+	const s16	(*rsv_chans)[2];
+	const s16	(*rsv_slots)[2];
+};
+
+/* platform_data for EDMA driver */
+struct edma_soc_info {
+
+	/* how many dma resources of each type */
+	unsigned	n_channel;
+	unsigned	n_region;
+	unsigned	n_slot;
+	unsigned	n_tc;
+	unsigned	n_cc;
+	/*
+	 * Default queue is expected to be a low-priority queue.
+	 * This way, long transfers on the default queue started
+	 * by the codec engine will not cause audio defects.
+	 */
+	enum dma_event_q	default_queue;
+
+	/* Resource reservation for other cores */
+	struct edma_rsv_info	*rsv;
+
+	s8	(*queue_tc_mapping)[2];
+	s8	(*queue_priority_mapping)[2];
+	const s16	(*xbar_chans)[2];
+};
+
+int edma_trigger_channel(unsigned);
+
+#endif
diff --git a/include/linux/platform_data/efm32-spi.h b/include/linux/platform_data/efm32-spi.h
new file mode 100644
index 000000000000..31b19ca1d73a
--- /dev/null
+++ b/include/linux/platform_data/efm32-spi.h
@@ -0,0 +1,14 @@
+#ifndef __LINUX_PLATFORM_DATA_EFM32_SPI_H__
+#define __LINUX_PLATFORM_DATA_EFM32_SPI_H__
+
+#include <linux/types.h>
+
+/**
+ * struct efm32_spi_pdata
+ * @location: pinmux location for the I/O pins (to be written to the ROUTE
+ * 	register)
+ */
+struct efm32_spi_pdata {
+	u8 location;
+};
+#endif /* ifndef __LINUX_PLATFORM_DATA_EFM32_SPI_H__ */
diff --git a/include/linux/platform_data/exynos_thermal.h b/include/linux/platform_data/exynos_thermal.h
deleted file mode 100644
index da7e6274b175..000000000000
--- a/include/linux/platform_data/exynos_thermal.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * exynos_thermal.h - Samsung EXYNOS TMU (Thermal Management Unit)
- *
- *  Copyright (C) 2011 Samsung Electronics
- *  Donggeun Kim <dg77.kim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _LINUX_EXYNOS_THERMAL_H
-#define _LINUX_EXYNOS_THERMAL_H
-#include <linux/cpu_cooling.h>
-
-enum calibration_type {
-	TYPE_ONE_POINT_TRIMMING,
-	TYPE_TWO_POINT_TRIMMING,
-	TYPE_NONE,
-};
-
-enum soc_type {
-	SOC_ARCH_EXYNOS4210 = 1,
-	SOC_ARCH_EXYNOS,
-};
-/**
- * struct freq_clip_table
- * @freq_clip_max: maximum frequency allowed for this cooling state.
- * @temp_level: Temperature level at which the temperature clipping will
- *	happen.
- * @mask_val: cpumask of the allowed cpu's where the clipping will take place.
- *
- * This structure is required to be filled and passed to the
- * cpufreq_cooling_unregister function.
- */
-struct freq_clip_table {
-	unsigned int freq_clip_max;
-	unsigned int temp_level;
-	const struct cpumask *mask_val;
-};
-
-/**
- * struct exynos_tmu_platform_data
- * @threshold: basic temperature for generating interrupt
- *	       25 <= threshold <= 125 [unit: degree Celsius]
- * @threshold_falling: differntial value for setting threshold
- *		       of temperature falling interrupt.
- * @trigger_levels: array for each interrupt levels
- *	[unit: degree Celsius]
- *	0: temperature for trigger_level0 interrupt
- *	   condition for trigger_level0 interrupt:
- *		current temperature > threshold + trigger_levels[0]
- *	1: temperature for trigger_level1 interrupt
- *	   condition for trigger_level1 interrupt:
- *		current temperature > threshold + trigger_levels[1]
- *	2: temperature for trigger_level2 interrupt
- *	   condition for trigger_level2 interrupt:
- *		current temperature > threshold + trigger_levels[2]
- *	3: temperature for trigger_level3 interrupt
- *	   condition for trigger_level3 interrupt:
- *		current temperature > threshold + trigger_levels[3]
- * @trigger_level0_en:
- *	1 = enable trigger_level0 interrupt,
- *	0 = disable trigger_level0 interrupt
- * @trigger_level1_en:
- *	1 = enable trigger_level1 interrupt,
- *	0 = disable trigger_level1 interrupt
- * @trigger_level2_en:
- *	1 = enable trigger_level2 interrupt,
- *	0 = disable trigger_level2 interrupt
- * @trigger_level3_en:
- *	1 = enable trigger_level3 interrupt,
- *	0 = disable trigger_level3 interrupt
- * @gain: gain of amplifier in the positive-TC generator block
- *	0 <= gain <= 15
- * @reference_voltage: reference voltage of amplifier
- *	in the positive-TC generator block
- *	0 <= reference_voltage <= 31
- * @noise_cancel_mode: noise cancellation mode
- *	000, 100, 101, 110 and 111 can be different modes
- * @type: determines the type of SOC
- * @efuse_value: platform defined fuse value
- * @cal_type: calibration type for temperature
- * @freq_clip_table: Table representing frequency reduction percentage.
- * @freq_tab_count: Count of the above table as frequency reduction may
- *	applicable to only some of the trigger levels.
- *
- * This structure is required for configuration of exynos_tmu driver.
- */
-struct exynos_tmu_platform_data {
-	u8 threshold;
-	u8 threshold_falling;
-	u8 trigger_levels[4];
-	bool trigger_level0_en;
-	bool trigger_level1_en;
-	bool trigger_level2_en;
-	bool trigger_level3_en;
-
-	u8 gain;
-	u8 reference_voltage;
-	u8 noise_cancel_mode;
-	u32 efuse_value;
-
-	enum calibration_type cal_type;
-	enum soc_type type;
-	struct freq_clip_table freq_tab[4];
-	unsigned int freq_tab_count;
-};
-#endif /* _LINUX_EXYNOS_THERMAL_H */
diff --git a/include/linux/platform_data/g762.h b/include/linux/platform_data/g762.h
new file mode 100644
index 000000000000..d3c51283764d
--- /dev/null
+++ b/include/linux/platform_data/g762.h
@@ -0,0 +1,37 @@
+/*
+ * Platform data structure for g762 fan controller driver
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __LINUX_PLATFORM_DATA_G762_H__
+#define __LINUX_PLATFORM_DATA_G762_H__
+
+/*
+ * Following structure can be used to set g762 driver platform specific data
+ * during board init. Note that passing a sparse structure is possible but
+ * will result in non-specified attributes to be set to default value, hence
+ * overloading those installed during boot (e.g. by u-boot).
+ */
+
+struct g762_platform_data {
+	u32 fan_startv;
+	u32 fan_gear_mode;
+	u32 pwm_polarity;
+	u32 clk_freq;
+};
+
+#endif /* __LINUX_PLATFORM_DATA_G762_H__ */
diff --git a/include/linux/platform_data/gpio-em.h b/include/linux/platform_data/gpio-em.h
index 573edfb046c4..7c5a519d2dcd 100644
--- a/include/linux/platform_data/gpio-em.h
+++ b/include/linux/platform_data/gpio-em.h
@@ -5,6 +5,7 @@ struct gpio_em_config {
 	unsigned int gpio_base;
 	unsigned int irq_base;
 	unsigned int number_of_pins;
+	const char *pctl_name;
 };
 
 #endif /* __GPIO_EM_H__ */
diff --git a/include/linux/platform_data/gpio-rcar.h b/include/linux/platform_data/gpio-rcar.h
index b253f77a7ddf..2d8d69432813 100644
--- a/include/linux/platform_data/gpio-rcar.h
+++ b/include/linux/platform_data/gpio-rcar.h
@@ -17,10 +17,13 @@
 #define __GPIO_RCAR_H__
 
 struct gpio_rcar_config {
-	unsigned int gpio_base;
+	int gpio_base;
 	unsigned int irq_base;
 	unsigned int number_of_pins;
 	const char *pctl_name;
+	unsigned has_both_edge_trigger:1;
 };
 
+#define RCAR_GP_PIN(bank, pin)		(((bank) * 32) + (pin))
+
 #endif /* __GPIO_RCAR_H__ */
diff --git a/include/linux/platform_data/gpio_backlight.h b/include/linux/platform_data/gpio_backlight.h
new file mode 100644
index 000000000000..5ae0d9c80d4d
--- /dev/null
+++ b/include/linux/platform_data/gpio_backlight.h
@@ -0,0 +1,21 @@
+/*
+ * gpio_backlight.h - Simple GPIO-controlled backlight
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __GPIO_BACKLIGHT_H__
+#define __GPIO_BACKLIGHT_H__
+
+struct device;
+
+struct gpio_backlight_platform_data {
+	struct device *fbdev;
+	int gpio;
+	int def_value;
+	bool active_low;
+	const char *name;
+};
+
+#endif
diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h
index 202e290faea8..51a2ff579d60 100644
--- a/include/linux/platform_data/leds-lp55xx.h
+++ b/include/linux/platform_data/leds-lp55xx.h
@@ -36,6 +36,13 @@ struct lp55xx_predef_pattern {
 	u8 size_b;
 };
 
+enum lp8501_pwr_sel {
+	LP8501_ALL_VDD,		/* D1~9 are connected to VDD */
+	LP8501_6VDD_3VOUT,	/* D1~6 with VDD, D7~9 with VOUT */
+	LP8501_3VDD_6VOUT,	/* D1~6 with VOUT, D7~9 with VDD */
+	LP8501_ALL_VOUT,	/* D1~9 are connected to VOUT */
+};
+
 /*
  * struct lp55xx_platform_data
  * @led_config        : Configurable led class device
@@ -67,6 +74,9 @@ struct lp55xx_platform_data {
 	/* Predefined pattern data */
 	struct lp55xx_predef_pattern *patterns;
 	unsigned int num_patterns;
+
+	/* LP8501 specific */
+	enum lp8501_pwr_sel pwr_sel;
 };
 
 #endif /* _LEDS_LP55XX_H */
diff --git a/include/linux/platform_data/leds-pca9633.h b/include/linux/platform_data/leds-pca963x.h
index c5bf29b6fa7f..e731f0036329 100644
--- a/include/linux/platform_data/leds-pca9633.h
+++ b/include/linux/platform_data/leds-pca963x.h
@@ -1,7 +1,8 @@
 /*
- * PCA9633 LED chip driver.
+ * PCA963X LED chip driver.
  *
  * Copyright 2012 bct electronic GmbH
+ * Copyright 2013 Qtechnology A/S
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -18,18 +19,24 @@
  * 02110-1301 USA
  */
 
-#ifndef __LINUX_PCA9633_H
-#define __LINUX_PCA9633_H
+#ifndef __LINUX_PCA963X_H
+#define __LINUX_PCA963X_H
 #include <linux/leds.h>
 
-enum pca9633_outdrv {
-	PCA9633_OPEN_DRAIN,
-	PCA9633_TOTEM_POLE, /* aka push-pull */
+enum pca963x_outdrv {
+	PCA963X_OPEN_DRAIN,
+	PCA963X_TOTEM_POLE, /* aka push-pull */
 };
 
-struct pca9633_platform_data {
+enum pca963x_blink_type {
+	PCA963X_SW_BLINK,
+	PCA963X_HW_BLINK,
+};
+
+struct pca963x_platform_data {
 	struct led_platform_data leds;
-	enum pca9633_outdrv outdrv;
+	enum pca963x_outdrv outdrv;
+	enum pca963x_blink_type blink_type;
 };
 
-#endif /* __LINUX_PCA9633_H*/
+#endif /* __LINUX_PCA963X_H*/
diff --git a/include/linux/platform_data/leds-renesas-tpu.h b/include/linux/platform_data/leds-renesas-tpu.h
deleted file mode 100644
index 055387086fc1..000000000000
--- a/include/linux/platform_data/leds-renesas-tpu.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __LEDS_RENESAS_TPU_H__
-#define __LEDS_RENESAS_TPU_H__
-
-struct led_renesas_tpu_config {
-	char *name;
-	unsigned pin_gpio_fn;
-	unsigned pin_gpio;
-	unsigned int channel_offset;
-	unsigned int timer_bit;
-	unsigned int max_brightness;
-	unsigned int refresh_rate;
-};
-
-#endif /* __LEDS_RENESAS_TPU_H__ */
diff --git a/include/linux/platform_data/lv5207lp.h b/include/linux/platform_data/lv5207lp.h
new file mode 100644
index 000000000000..7dc4d9a219a6
--- /dev/null
+++ b/include/linux/platform_data/lv5207lp.h
@@ -0,0 +1,19 @@
+/*
+ * lv5207lp.h - Sanyo LV5207LP LEDs Driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LV5207LP_H__
+#define __LV5207LP_H__
+
+struct device;
+
+struct lv5207lp_platform_data {
+	struct device *fbdev;
+	unsigned int max_value;
+	unsigned int def_value;
+};
+
+#endif
diff --git a/include/linux/platform_data/mailbox-omap.h b/include/linux/platform_data/mailbox-omap.h
new file mode 100644
index 000000000000..4631dbb4255e
--- /dev/null
+++ b/include/linux/platform_data/mailbox-omap.h
@@ -0,0 +1,58 @@
+/*
+ * mailbox-omap.h
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _PLAT_MAILBOX_H
+#define _PLAT_MAILBOX_H
+
+/* Interrupt register configuration types */
+#define MBOX_INTR_CFG_TYPE1	(0)
+#define MBOX_INTR_CFG_TYPE2	(1)
+
+/**
+ * struct omap_mbox_dev_info - OMAP mailbox device attribute info
+ * @name:	name of the mailbox device
+ * @tx_id:	mailbox queue id used for transmitting messages
+ * @rx_id:	mailbox queue id on which messages are received
+ * @irq_id:	irq identifier number to use from the hwmod data
+ * @usr_id:	mailbox user id for identifying the interrupt into
+ *			the MPU interrupt controller.
+ */
+struct omap_mbox_dev_info {
+	const char *name;
+	u32 tx_id;
+	u32 rx_id;
+	u32 irq_id;
+	u32 usr_id;
+};
+
+/**
+ * struct omap_mbox_pdata - OMAP mailbox platform data
+ * @intr_type:	type of interrupt configuration registers used
+			while programming mailbox queue interrupts
+ * @num_users:	number of users (processor devices) that the mailbox
+ *			h/w block can interrupt
+ * @num_fifos:	number of h/w fifos within the mailbox h/w block
+ * @info_cnt:	number of mailbox devices for the platform
+ * @info:	array of mailbox device attributes
+ */
+struct omap_mbox_pdata {
+	u32 intr_type;
+	u32 num_users;
+	u32 num_fifos;
+	u32 info_cnt;
+	struct omap_mbox_dev_info *info;
+};
+
+#endif /* _PLAT_MAILBOX_H */
diff --git a/include/linux/platform_data/max310x.h b/include/linux/platform_data/max310x.h
index 91648bf5fc5c..dd11dcd1a184 100644
--- a/include/linux/platform_data/max310x.h
+++ b/include/linux/platform_data/max310x.h
@@ -1,5 +1,5 @@
 /*
- *  Maxim (Dallas) MAX3107/8 serial driver
+ *  Maxim (Dallas) MAX3107/8/9, MAX14830 serial driver
  *
  *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
  *
@@ -37,14 +37,13 @@
  * };
  */
 
-#define MAX310X_MAX_UARTS	1
+#define MAX310X_MAX_UARTS	4
 
 /* MAX310X platform data structure */
 struct max310x_pdata {
 	/* Flags global to driver */
-	const u8		driver_flags:2;
+	const u8		driver_flags;
 #define MAX310X_EXT_CLK		(0x00000001)	/* External clock enable */
-#define MAX310X_AUTOSLEEP	(0x00000002)	/* Enable AutoSleep mode */
 	/* Flags global to UART port */
 	const u8		uart_flags[MAX310X_MAX_UARTS];
 #define MAX310X_LOOPBACK	(0x00000001)	/* Loopback mode enable */
@@ -60,8 +59,6 @@ struct max310x_pdata {
 	void (*init)(void);
 	/* Called before finish */
 	void (*exit)(void);
-	/* Suspend callback */
-	void (*suspend)(int do_suspend);
 };
 
 #endif
diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h
index b4a0521ce411..d44912d81578 100644
--- a/include/linux/platform_data/mmc-esdhc-imx.h
+++ b/include/linux/platform_data/mmc-esdhc-imx.h
@@ -40,5 +40,6 @@ struct esdhc_platform_data {
 	enum wp_types wp_type;
 	enum cd_types cd_type;
 	int max_bus_width;
+	unsigned int f_max;
 };
 #endif /* __ASM_ARCH_IMX_ESDHC_H */
diff --git a/include/linux/platform_data/mmc-pxamci.h b/include/linux/platform_data/mmc-pxamci.h
index 9eb515bb799d..1706b3597ce0 100644
--- a/include/linux/platform_data/mmc-pxamci.h
+++ b/include/linux/platform_data/mmc-pxamci.h
@@ -12,7 +12,7 @@ struct pxamci_platform_data {
 	unsigned long detect_delay_ms;		/* delay in millisecond before detecting cards after interrupt */
 	int (*init)(struct device *, irq_handler_t , void *);
 	int (*get_ro)(struct device *);
-	void (*setpower)(struct device *, unsigned int);
+	int (*setpower)(struct device *, unsigned int);
 	void (*exit)(struct device *, void *);
 	int gpio_card_detect;			/* gpio detecting card insertion */
 	int gpio_card_ro;			/* gpio detecting read only toggle */
diff --git a/include/linux/platform_data/mtd-nand-pxa3xx.h b/include/linux/platform_data/mtd-nand-pxa3xx.h
index c42f39f20195..ffb801998e5d 100644
--- a/include/linux/platform_data/mtd-nand-pxa3xx.h
+++ b/include/linux/platform_data/mtd-nand-pxa3xx.h
@@ -16,19 +16,6 @@ struct pxa3xx_nand_timing {
 	unsigned int	tAR;  /* ND_ALE low to ND_nRE low delay */
 };
 
-struct pxa3xx_nand_cmdset {
-	uint16_t	read1;
-	uint16_t	read2;
-	uint16_t	program;
-	uint16_t	read_status;
-	uint16_t	read_id;
-	uint16_t	erase;
-	uint16_t	reset;
-	uint16_t	lock;
-	uint16_t	unlock;
-	uint16_t	lock_status;
-};
-
 struct pxa3xx_nand_flash {
 	char		*name;
 	uint32_t	chip_id;
diff --git a/include/linux/platform_data/net-cw1200.h b/include/linux/platform_data/net-cw1200.h
new file mode 100644
index 000000000000..c6fbc3ce4ab0
--- /dev/null
+++ b/include/linux/platform_data/net-cw1200.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CW1200_PLAT_H_INCLUDED
+#define CW1200_PLAT_H_INCLUDED
+
+struct cw1200_platform_data_spi {
+	u8 spi_bits_per_word;           /* REQUIRED */
+	u16 ref_clk;                    /* REQUIRED (in KHz) */
+
+	/* All others are optional */
+	bool have_5ghz;
+	int reset;                     /* GPIO to RSTn signal (0 disables) */
+	int powerup;                   /* GPIO to POWERUP signal (0 disables) */
+	int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata,
+			  bool enable); /* Control 3v3 / 1v8 supply */
+	int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata,
+			bool enable); /* Control CLK32K */
+	const u8 *macaddr;  /* if NULL, use cw1200_mac_template module parameter */
+	const char *sdd_file;  /* if NULL, will use default for detected hw type */
+};
+
+struct cw1200_platform_data_sdio {
+	u16 ref_clk;                    /* REQUIRED (in KHz) */
+
+	/* All others are optional */
+	bool have_5ghz;
+	bool no_nptb;       /* SDIO hardware does not support non-power-of-2-blocksizes */
+	int reset;          /* GPIO to RSTn signal (0 disables) */
+	int powerup;        /* GPIO to POWERUP signal (0 disables) */
+	int irq;            /* IRQ line or 0 to use SDIO IRQ */
+	int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata,
+			  bool enable); /* Control 3v3 / 1v8 supply */
+	int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata,
+			bool enable); /* Control CLK32K */
+	const u8 *macaddr;  /* if NULL, use cw1200_mac_template module parameter */
+	const char *sdd_file;  /* if NULL, will use default for detected hw type */
+};
+
+
+/* An example of SPI support in your board setup file:
+
+   static struct cw1200_platform_data_spi cw1200_platform_data = {
+       .ref_clk = 38400,
+       .spi_bits_per_word = 16,
+       .reset = GPIO_RF_RESET,
+       .powerup = GPIO_RF_POWERUP,
+       .macaddr = wifi_mac_addr,
+       .sdd_file = "sdd_sagrad_1091_1098.bin",
+  };
+  static struct spi_board_info myboard_spi_devices[] __initdata = {
+       {
+               .modalias = "cw1200_wlan_spi",
+               .max_speed_hz = 52000000,
+               .bus_num = 0,
+               .irq = WIFI_IRQ,
+               .platform_data = &cw1200_platform_data,
+               .chip_select = 0,
+       },
+  };
+
+ */
+
+/* An example of SDIO support in your board setup file:
+
+  static struct cw1200_platform_data_sdio my_cw1200_platform_data = {
+	.ref_clk = 38400,
+	.have_5ghz = false,
+	.sdd_file = "sdd_myplatform.bin",
+  };
+  cw1200_sdio_set_platform_data(&my_cw1200_platform_data);
+
+ */
+
+void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata);
+
+#endif /* CW1200_PLAT_H_INCLUDED */
diff --git a/include/linux/platform_data/omap-abe-twl6040.h b/include/linux/platform_data/omap-abe-twl6040.h
deleted file mode 100644
index 5d298ac10fc2..000000000000
--- a/include/linux/platform_data/omap-abe-twl6040.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/**
- * omap-abe-twl6040.h - ASoC machine driver OMAP4+ devices, header.
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
- * All rights reserved.
- *
- * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef _OMAP_ABE_TWL6040_H_
-#define _OMAP_ABE_TWL6040_H_
-
-/* To select if only one channel is connected in a stereo port */
-#define ABE_TWL6040_LEFT	(1 << 0)
-#define ABE_TWL6040_RIGHT	(1 << 1)
-
-struct omap_abe_twl6040_data {
-	char *card_name;
-	/* Feature flags for connected audio pins */
-	u8	has_hs;
-	u8	has_hf;
-	bool	has_ep;
-	u8	has_aux;
-	u8	has_vibra;
-	bool	has_dmic;
-	bool	has_hsmic;
-	bool	has_mainmic;
-	bool	has_submic;
-	u8	has_afm;
-	/* Other features */
-	bool	jack_detection;	/* board can detect jack events */
-	int	mclk_freq;	/* MCLK frequency speed for twl6040 */
-};
-
-#endif /* _OMAP_ABE_TWL6040_H_ */
diff --git a/include/linux/platform_data/omap_ocp2scp.h b/include/linux/platform_data/omap_ocp2scp.h
deleted file mode 100644
index 5c6c3939355f..000000000000
--- a/include/linux/platform_data/omap_ocp2scp.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * omap_ocp2scp.h -- ocp2scp header file
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Author: Kishon Vijay Abraham I <kishon@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __DRIVERS_OMAP_OCP2SCP_H
-#define __DRIVERS_OMAP_OCP2SCP_H
-
-struct omap_ocp2scp_dev {
-	const char			*drv_name;
-	struct resource			*res;
-};
-
-struct omap_ocp2scp_platform_data {
-	int				dev_cnt;
-	struct omap_ocp2scp_dev		**devices;
-};
-#endif /* __DRIVERS_OMAP_OCP2SCP_H */
diff --git a/include/linux/platform_data/pca953x.h b/include/linux/platform_data/pca953x.h
new file mode 100644
index 000000000000..3c98dd4f901f
--- /dev/null
+++ b/include/linux/platform_data/pca953x.h
@@ -0,0 +1,30 @@
+#ifndef _LINUX_PCA953X_H
+#define _LINUX_PCA953X_H
+
+#include <linux/types.h>
+#include <linux/i2c.h>
+
+/* platform data for the PCA9539 16-bit I/O expander driver */
+
+struct pca953x_platform_data {
+	/* number of the first GPIO */
+	unsigned	gpio_base;
+
+	/* initial polarity inversion setting */
+	u32		invert;
+
+	/* interrupt base */
+	int		irq_base;
+
+	void		*context;	/* param to setup/teardown */
+
+	int		(*setup)(struct i2c_client *client,
+				unsigned gpio, unsigned ngpio,
+				void *context);
+	int		(*teardown)(struct i2c_client *client,
+				unsigned gpio, unsigned ngpio,
+				void *context);
+	const char	*const *names;
+};
+
+#endif /* _LINUX_PCA953X_H */
diff --git a/include/linux/platform_data/pinctrl-coh901.h b/include/linux/platform_data/pinctrl-coh901.h
deleted file mode 100644
index dfbc65d10484..000000000000
--- a/include/linux/platform_data/pinctrl-coh901.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2007-2012 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * GPIO block resgister definitions and inline macros for
- * U300 GPIO COH 901 335 or COH 901 571/3
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_GPIO_U300_H
-#define __MACH_U300_GPIO_U300_H
-
-/**
- * struct u300_gpio_platform - U300 GPIO platform data
- * @ports: number of GPIO block ports
- * @gpio_base: first GPIO number for this block (use a free range)
- */
-struct u300_gpio_platform {
-	u8 ports;
-	int gpio_base;
-};
-
-#endif /* __MACH_U300_GPIO_U300_H */
diff --git a/include/linux/platform_data/pinctrl-nomadik.h b/include/linux/platform_data/pinctrl-nomadik.h
index f73b2f0c55b7..abf5bed84df3 100644
--- a/include/linux/platform_data/pinctrl-nomadik.h
+++ b/include/linux/platform_data/pinctrl-nomadik.h
@@ -226,30 +226,6 @@ enum nmk_gpio_slpm {
 	NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
 };
 
-/* Older deprecated pin config API that should go away soon */
-extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
-extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
-extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);
-extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
-extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
-#ifdef CONFIG_PINCTRL_NOMADIK
-extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
-#else
-static inline int nmk_gpio_set_mode(int gpio, int gpio_mode)
-{
-	return -ENODEV;
-}
-#endif
-extern int nmk_gpio_get_mode(int gpio);
-
-extern void nmk_gpio_wakeups_suspend(void);
-extern void nmk_gpio_wakeups_resume(void);
-
-extern void nmk_gpio_clocks_enable(void);
-extern void nmk_gpio_clocks_disable(void);
-
-extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up);
-
 /*
  * Platform data to register a block: only the initial gpio/irq number.
  */
diff --git a/include/linux/platform_data/pwm-renesas-tpu.h b/include/linux/platform_data/pwm-renesas-tpu.h
new file mode 100644
index 000000000000..a7220b10ddab
--- /dev/null
+++ b/include/linux/platform_data/pwm-renesas-tpu.h
@@ -0,0 +1,16 @@
+#ifndef __PWM_RENESAS_TPU_H__
+#define __PWM_RENESAS_TPU_H__
+
+#include <linux/pwm.h>
+
+#define TPU_CHANNEL_MAX		4
+
+struct tpu_pwm_channel_data {
+	enum pwm_polarity polarity;
+};
+
+struct tpu_pwm_platform_data {
+	struct tpu_pwm_channel_data channels[TPU_CHANNEL_MAX];
+};
+
+#endif /* __PWM_RENESAS_TPU_H__ */
diff --git a/include/linux/platform_data/rcar-du.h b/include/linux/platform_data/rcar-du.h
new file mode 100644
index 000000000000..1a2e9901a22e
--- /dev/null
+++ b/include/linux/platform_data/rcar-du.h
@@ -0,0 +1,74 @@
+/*
+ * rcar_du.h  --  R-Car Display Unit DRM driver
+ *
+ * Copyright (C) 2013 Renesas Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __RCAR_DU_H__
+#define __RCAR_DU_H__
+
+#include <drm/drm_mode.h>
+
+enum rcar_du_output {
+	RCAR_DU_OUTPUT_DPAD0,
+	RCAR_DU_OUTPUT_DPAD1,
+	RCAR_DU_OUTPUT_LVDS0,
+	RCAR_DU_OUTPUT_LVDS1,
+	RCAR_DU_OUTPUT_TCON,
+	RCAR_DU_OUTPUT_MAX,
+};
+
+enum rcar_du_encoder_type {
+	RCAR_DU_ENCODER_UNUSED = 0,
+	RCAR_DU_ENCODER_NONE,
+	RCAR_DU_ENCODER_VGA,
+	RCAR_DU_ENCODER_LVDS,
+};
+
+struct rcar_du_panel_data {
+	unsigned int width_mm;		/* Panel width in mm */
+	unsigned int height_mm;		/* Panel height in mm */
+	struct drm_mode_modeinfo mode;
+};
+
+struct rcar_du_connector_lvds_data {
+	struct rcar_du_panel_data panel;
+};
+
+struct rcar_du_connector_vga_data {
+	/* TODO: Add DDC information for EDID retrieval */
+};
+
+/*
+ * struct rcar_du_encoder_data - Encoder platform data
+ * @type: the encoder type (RCAR_DU_ENCODER_*)
+ * @output: the DU output the connector is connected to (RCAR_DU_OUTPUT_*)
+ * @connector.lvds: platform data for LVDS connectors
+ * @connector.vga: platform data for VGA connectors
+ *
+ * Encoder platform data describes an on-board encoder, its associated DU SoC
+ * output, and the connector.
+ */
+struct rcar_du_encoder_data {
+	enum rcar_du_encoder_type type;
+	enum rcar_du_output output;
+
+	union {
+		struct rcar_du_connector_lvds_data lvds;
+		struct rcar_du_connector_vga_data vga;
+	} connector;
+};
+
+struct rcar_du_platform_data {
+	struct rcar_du_encoder_data *encoders;
+	unsigned int num_encoders;
+};
+
+#endif /* __RCAR_DU_H__ */
diff --git a/include/linux/platform_data/remoteproc-omap.h b/include/linux/platform_data/remoteproc-omap.h
index 3c1c6444ec4b..bfbd12b41162 100644
--- a/include/linux/platform_data/remoteproc-omap.h
+++ b/include/linux/platform_data/remoteproc-omap.h
@@ -50,7 +50,7 @@ void __init omap_rproc_reserve_cma(void);
 
 #else
 
-void __init omap_rproc_reserve_cma(void)
+static inline void __init omap_rproc_reserve_cma(void)
 {
 }
 
diff --git a/include/linux/platform_data/serial-sccnxp.h b/include/linux/platform_data/serial-sccnxp.h
index bdc510d03245..af0c8c3b89ae 100644
--- a/include/linux/platform_data/serial-sccnxp.h
+++ b/include/linux/platform_data/serial-sccnxp.h
@@ -60,7 +60,6 @@
  * };
  *
  * static struct sccnxp_pdata sc2892_info = {
- *	.frequency	= 3686400,
  *	.mctrl_cfg[0]	= MCTRL_SIG(DIR_OP, LINE_OP0),
  *	.mctrl_cfg[1]	= MCTRL_SIG(DIR_OP, LINE_OP1),
  * };
@@ -78,8 +77,6 @@
 
 /* SCCNXP platform data structure */
 struct sccnxp_pdata {
-	/* Frequency (extrenal clock or crystal) */
-	int			frequency;
 	/* Shift for A0 line */
 	const u8		reg_shift;
 	/* Modem control lines configuration */
diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h
index 92dabcaf6499..54334393ab92 100644
--- a/include/linux/platform_data/si5351.h
+++ b/include/linux/platform_data/si5351.h
@@ -79,6 +79,23 @@ enum si5351_drive_strength {
 };
 
 /**
+ * enum si5351_disable_state - Si5351 clock output disable state
+ * @SI5351_DISABLE_DEFAULT: default, do not change eeprom config
+ * @SI5351_DISABLE_LOW: CLKx is set to a LOW state when disabled
+ * @SI5351_DISABLE_HIGH: CLKx is set to a HIGH state when disabled
+ * @SI5351_DISABLE_FLOATING: CLKx is set to a FLOATING state when
+ *				disabled
+ * @SI5351_DISABLE_NEVER: CLKx is NEVER disabled
+ */
+enum si5351_disable_state {
+	SI5351_DISABLE_DEFAULT = 0,
+	SI5351_DISABLE_LOW,
+	SI5351_DISABLE_HIGH,
+	SI5351_DISABLE_FLOATING,
+	SI5351_DISABLE_NEVER,
+};
+
+/**
  * struct si5351_clkout_config - Si5351 clock output configuration
  * @clkout: clkout number
  * @multisynth_src: multisynth source clock
@@ -91,6 +108,7 @@ struct si5351_clkout_config {
 	enum si5351_multisynth_src multisynth_src;
 	enum si5351_clkout_src clkout_src;
 	enum si5351_drive_strength drive;
+	enum si5351_disable_state disable_state;
 	bool pll_master;
 	unsigned long rate;
 };
diff --git a/include/linux/platform_data/simplefb.h b/include/linux/platform_data/simplefb.h
new file mode 100644
index 000000000000..077303cedbf4
--- /dev/null
+++ b/include/linux/platform_data/simplefb.h
@@ -0,0 +1,64 @@
+/*
+ * simplefb.h - Simple Framebuffer Device
+ *
+ * Copyright (C) 2013 David Herrmann <dh.herrmann@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __PLATFORM_DATA_SIMPLEFB_H__
+#define __PLATFORM_DATA_SIMPLEFB_H__
+
+#include <drm/drm_fourcc.h>
+#include <linux/fb.h>
+#include <linux/kernel.h>
+
+/* format array, use it to initialize a "struct simplefb_format" array */
+#define SIMPLEFB_FORMATS \
+{ \
+	{ "r5g6b5", 16, {11, 5}, {5, 6}, {0, 5}, {0, 0}, DRM_FORMAT_RGB565 }, \
+	{ "x1r5g5b5", 16, {10, 5}, {5, 5}, {0, 5}, {0, 0}, DRM_FORMAT_XRGB1555 }, \
+	{ "a1r5g5b5", 16, {10, 5}, {5, 5}, {0, 5}, {15, 1}, DRM_FORMAT_ARGB1555 }, \
+	{ "r8g8b8", 24, {16, 8}, {8, 8}, {0, 8}, {0, 0}, DRM_FORMAT_RGB888 }, \
+	{ "x8r8g8b8", 32, {16, 8}, {8, 8}, {0, 8}, {0, 0}, DRM_FORMAT_XRGB8888 }, \
+	{ "a8r8g8b8", 32, {16, 8}, {8, 8}, {0, 8}, {24, 8}, DRM_FORMAT_ARGB8888 }, \
+	{ "a8b8g8r8", 32, {0, 8}, {8, 8}, {16, 8}, {24, 8}, DRM_FORMAT_ABGR8888 }, \
+	{ "x2r10g10b10", 32, {20, 10}, {10, 10}, {0, 10}, {0, 0}, DRM_FORMAT_XRGB2101010 }, \
+	{ "a2r10g10b10", 32, {20, 10}, {10, 10}, {0, 10}, {30, 2}, DRM_FORMAT_ARGB2101010 }, \
+}
+
+/*
+ * Data-Format for Simple-Framebuffers
+ * @name: unique 0-terminated name that can be used to identify the mode
+ * @red,green,blue: Offsets and sizes of the single RGB parts
+ * @transp: Offset and size of the alpha bits. length=0 means no alpha
+ * @fourcc: 32bit DRM four-CC code (see drm_fourcc.h)
+ */
+struct simplefb_format {
+	const char *name;
+	u32 bits_per_pixel;
+	struct fb_bitfield red;
+	struct fb_bitfield green;
+	struct fb_bitfield blue;
+	struct fb_bitfield transp;
+	u32 fourcc;
+};
+
+/*
+ * Simple-Framebuffer description
+ * If the arch-boot code creates simple-framebuffers without DT support, it
+ * can pass the width, height, stride and format via this platform-data object.
+ * The framebuffer location must be given as IORESOURCE_MEM resource.
+ * @format must be a format as described in "struct simplefb_format" above.
+ */
+struct simplefb_platform_data {
+	u32 width;
+	u32 height;
+	u32 stride;
+	const char *format;
+};
+
+#endif /* __PLATFORM_DATA_SIMPLEFB_H__ */
diff --git a/include/linux/platform_data/spi-davinci.h b/include/linux/platform_data/spi-davinci.h
index 7af305b37868..8dc2fa47a2aa 100644
--- a/include/linux/platform_data/spi-davinci.h
+++ b/include/linux/platform_data/spi-davinci.h
@@ -19,7 +19,7 @@
 #ifndef __ARCH_ARM_DAVINCI_SPI_H
 #define __ARCH_ARM_DAVINCI_SPI_H
 
-#include <mach/edma.h>
+#include <linux/platform_data/edma.h>
 
 #define SPI_INTERN_CS	0xFF
 
diff --git a/include/linux/platform_data/ssm2518.h b/include/linux/platform_data/ssm2518.h
new file mode 100644
index 000000000000..9a8e3ea287e3
--- /dev/null
+++ b/include/linux/platform_data/ssm2518.h
@@ -0,0 +1,22 @@
+/*
+ * SSM2518 amplifier audio driver
+ *
+ * Copyright 2013 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_SSM2518_H__
+#define __LINUX_PLATFORM_DATA_SSM2518_H__
+
+/**
+ * struct ssm2518_platform_data - Platform data for the ssm2518 driver
+ * @enable_gpio: GPIO connected to the nSD pin. Set to -1 if the nSD pin is
+ *            hardwired.
+ */
+struct ssm2518_platform_data {
+	int enable_gpio;
+};
+
+#endif
diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h
new file mode 100644
index 000000000000..753839187ba0
--- /dev/null
+++ b/include/linux/platform_data/st_sensors_pdata.h
@@ -0,0 +1,24 @@
+/*
+ * STMicroelectronics sensors platform-data driver
+ *
+ * Copyright 2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_SENSORS_PDATA_H
+#define ST_SENSORS_PDATA_H
+
+/**
+ * struct st_sensors_platform_data - Platform data for the ST sensors
+ * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2).
+ *	Available only for accelerometer and pressure sensors.
+ *	Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet).
+ */
+struct st_sensors_platform_data {
+	u8 drdy_int_pin;
+};
+
+#endif /* ST_SENSORS_PDATA_H */
diff --git a/include/linux/platform_data/ti_am335x_adc.h b/include/linux/platform_data/ti_am335x_adc.h
deleted file mode 100644
index e41d5834cb84..000000000000
--- a/include/linux/platform_data/ti_am335x_adc.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __LINUX_TI_AM335X_ADC_H
-#define __LINUX_TI_AM335X_ADC_H
-
-/**
- * struct adc_data	ADC Input information
- * @adc_channels:	Number of analog inputs
- *			available for ADC.
- */
-
-struct adc_data {
-	unsigned int adc_channels;
-};
-
-#endif
diff --git a/include/linux/platform_data/usb-musb-ux500.h b/include/linux/platform_data/usb-musb-ux500.h
index 4c1cc50a595a..dd9c83ac7de0 100644
--- a/include/linux/platform_data/usb-musb-ux500.h
+++ b/include/linux/platform_data/usb-musb-ux500.h
@@ -9,14 +9,11 @@
 
 #include <linux/dmaengine.h>
 
-#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8
-#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8
+#define UX500_MUSB_DMA_NUM_RX_TX_CHANNELS 8
 
 struct ux500_musb_board_data {
 	void	**dma_rx_param_array;
 	void	**dma_tx_param_array;
-	u32	num_rx_channels;
-	u32	num_tx_channels;
 	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
 };
 
diff --git a/include/linux/platform_data/usb-rcar-phy.h b/include/linux/platform_data/usb-rcar-phy.h
new file mode 100644
index 000000000000..8ec6964a32a5
--- /dev/null
+++ b/include/linux/platform_data/usb-rcar-phy.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __USB_RCAR_PHY_H
+#define __USB_RCAR_PHY_H
+
+#include <linux/types.h>
+
+struct rcar_phy_platform_data {
+	bool ferrite_bead:1;	/* (R8A7778 only)			*/
+
+	bool port1_func:1;	/* true: port 1 used by function, false: host */
+	unsigned penc1:1;	/* Output of the PENC1 pin in function mode */
+	struct {		/* Overcurrent pin control for ports 0..2 */
+		bool select_3_3v:1; /* true: USB_OVCn pin, false: OVCn pin */
+				/* Set to false on port 1 in function mode */
+		bool active_high:1; /* true: active  high, false: active low */
+				/* Set to true  on port 1 in function mode */
+	} ovc_pin[3];		/* (R8A7778 only has 2 ports)		*/
+};
+
+#endif /* __USB_RCAR_PHY_H */
diff --git a/include/linux/platform_data/usb3503.h b/include/linux/platform_data/usb3503.h
index 85dcc709f7e9..1d1b6ef871f6 100644
--- a/include/linux/platform_data/usb3503.h
+++ b/include/linux/platform_data/usb3503.h
@@ -3,6 +3,10 @@
 
 #define USB3503_I2C_NAME	"usb3503"
 
+#define USB3503_OFF_PORT1	(1 << 1)
+#define USB3503_OFF_PORT2	(1 << 2)
+#define USB3503_OFF_PORT3	(1 << 3)
+
 enum usb3503_mode {
 	USB3503_MODE_UNKNOWN,
 	USB3503_MODE_HUB,
@@ -11,6 +15,7 @@ enum usb3503_mode {
 
 struct usb3503_platform_data {
 	enum usb3503_mode	initial_mode;
+	u8	port_off_mask;
 	int	gpio_intn;
 	int	gpio_connect;
 	int	gpio_reset;
diff --git a/include/linux/platform_data/vsp1.h b/include/linux/platform_data/vsp1.h
new file mode 100644
index 000000000000..a73a456d7f11
--- /dev/null
+++ b/include/linux/platform_data/vsp1.h
@@ -0,0 +1,25 @@
+/*
+ * vsp1.h  --  R-Car VSP1 Platform Data
+ *
+ * Copyright (C) 2013 Renesas Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __PLATFORM_VSP1_H__
+#define __PLATFORM_VSP1_H__
+
+#define VSP1_HAS_LIF		(1 << 0)
+
+struct vsp1_platform_data {
+	unsigned int features;
+	unsigned int rpf_count;
+	unsigned int uds_count;
+	unsigned int wpf_count;
+};
+
+#endif /* __PLATFORM_VSP1_H__ */
diff --git a/include/linux/platform_data/tegra_usb.h b/include/linux/platform_data/zforce_ts.h
index 66c673fef408..0472ab2f6ede 100644
--- a/include/linux/platform_data/tegra_usb.h
+++ b/include/linux/platform_data/zforce_ts.h
@@ -1,5 +1,6 @@
-/*
- * Copyright (C) 2010 Google, Inc.
+/* drivers/input/touchscreen/zforce.c
+ *
+ * Copyright (C) 2012-2013 MundoReader S.L.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -9,24 +10,17 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
  */
 
-#ifndef _TEGRA_USB_H_
-#define _TEGRA_USB_H_
+#ifndef _LINUX_INPUT_ZFORCE_TS_H
+#define _LINUX_INPUT_ZFORCE_TS_H
 
-enum tegra_usb_operating_modes {
-	TEGRA_USB_DEVICE,
-	TEGRA_USB_HOST,
-	TEGRA_USB_OTG,
-};
+struct zforce_ts_platdata {
+	int gpio_int;
+	int gpio_rst;
 
-struct tegra_ehci_platform_data {
-	enum tegra_usb_operating_modes operating_mode;
-	/* power down the phy on bus suspend */
-	int power_down_on_bus_suspend;
-	void *phy_config;
-	int vbus_gpio;
+	unsigned int x_max;
+	unsigned int y_max;
 };
 
-#endif /* _TEGRA_USB_H_ */
+#endif /* _LINUX_INPUT_ZFORCE_TS_H */