Merge branch 'next' (accumulated 3.16 merge window patches) into master

Now that 3.15 is released, this merges the 'next' branch into 'master',
bringing us to the normal situation where my 'master' branch is the
merge window.

* accumulated work in next: (6809 commits)
  ufs: sb mutex merge + mutex_destroy
  powerpc: update comments for generic idle conversion
  cris: update comments for generic idle conversion
  idle: remove cpu_idle() forward declarations
  nbd: zero from and len fields in NBD_CMD_DISCONNECT.
  mm: convert some level-less printks to pr_*
  MAINTAINERS: adi-buildroot-devel is moderated
  MAINTAINERS: add linux-api for review of API/ABI changes
  mm/kmemleak-test.c: use pr_fmt for logging
  fs/dlm/debug_fs.c: replace seq_printf by seq_puts
  fs/dlm/lockspace.c: convert simple_str to kstr
  fs/dlm/config.c: convert simple_str to kstr
  mm: mark remap_file_pages() syscall as deprecated
  mm: memcontrol: remove unnecessary memcg argument from soft limit functions
  mm: memcontrol: clean up memcg zoneinfo lookup
  mm/memblock.c: call kmemleak directly from memblock_(alloc|free)
  mm/mempool.c: update the kmemleak stack trace for mempool allocations
  lib/radix-tree.c: update the kmemleak stack trace for radix tree allocations
  mm: introduce kmemleak_update_trace()
  mm/kmemleak.c: use %u to print ->checksum
  ...

8 files changed, 181 insertions, 75 deletions

diff --git a/include/linux/platform_data/adau17x1.h b/include/linux/platform_data/adau17x1.h
new file mode 100644
index 000000000000..a81766cae230
--- /dev/null
+++ b/include/linux/platform_data/adau17x1.h
@@ -0,0 +1,109 @@
+/*
+ * Driver for ADAU1761/ADAU1461/ADAU1761/ADAU1961/ADAU1781/ADAU1781 codecs
+ *
+ * Copyright 2011-2014 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_ADAU17X1_H__
+#define __LINUX_PLATFORM_DATA_ADAU17X1_H__
+
+/**
+ * enum adau17x1_micbias_voltage - Microphone bias voltage
+ * @ADAU17X1_MICBIAS_0_90_AVDD: 0.9 * AVDD
+ * @ADAU17X1_MICBIAS_0_65_AVDD: 0.65 * AVDD
+ */
+enum adau17x1_micbias_voltage {
+	ADAU17X1_MICBIAS_0_90_AVDD = 0,
+	ADAU17X1_MICBIAS_0_65_AVDD = 1,
+};
+
+/**
+ * enum adau1761_digmic_jackdet_pin_mode - Configuration of the JACKDET/MICIN pin
+ * @ADAU1761_DIGMIC_JACKDET_PIN_MODE_NONE: Disable the pin
+ * @ADAU1761_DIGMIC_JACKDET_PIN_MODE_DIGMIC: Configure the pin for usage as
+ *   digital microphone input.
+ * @ADAU1761_DIGMIC_JACKDET_PIN_MODE_JACKDETECT: Configure the pin for jack
+ *  insertion detection.
+ */
+enum adau1761_digmic_jackdet_pin_mode {
+	ADAU1761_DIGMIC_JACKDET_PIN_MODE_NONE,
+	ADAU1761_DIGMIC_JACKDET_PIN_MODE_DIGMIC,
+	ADAU1761_DIGMIC_JACKDET_PIN_MODE_JACKDETECT,
+};
+
+/**
+ * adau1761_jackdetect_debounce_time - Jack insertion detection debounce time
+ * @ADAU1761_JACKDETECT_DEBOUNCE_5MS: 5 milliseconds
+ * @ADAU1761_JACKDETECT_DEBOUNCE_10MS: 10 milliseconds
+ * @ADAU1761_JACKDETECT_DEBOUNCE_20MS: 20 milliseconds
+ * @ADAU1761_JACKDETECT_DEBOUNCE_40MS: 40 milliseconds
+ */
+enum adau1761_jackdetect_debounce_time {
+	ADAU1761_JACKDETECT_DEBOUNCE_5MS = 0,
+	ADAU1761_JACKDETECT_DEBOUNCE_10MS = 1,
+	ADAU1761_JACKDETECT_DEBOUNCE_20MS = 2,
+	ADAU1761_JACKDETECT_DEBOUNCE_40MS = 3,
+};
+
+/**
+ * enum adau1761_output_mode - Output mode configuration
+ * @ADAU1761_OUTPUT_MODE_HEADPHONE: Headphone output
+ * @ADAU1761_OUTPUT_MODE_HEADPHONE_CAPLESS: Capless headphone output
+ * @ADAU1761_OUTPUT_MODE_LINE: Line output
+ */
+enum adau1761_output_mode {
+	ADAU1761_OUTPUT_MODE_HEADPHONE,
+	ADAU1761_OUTPUT_MODE_HEADPHONE_CAPLESS,
+	ADAU1761_OUTPUT_MODE_LINE,
+};
+
+/**
+ * struct adau1761_platform_data - ADAU1761 Codec driver platform data
+ * @input_differential: If true the input pins will be configured in
+ *  differential mode.
+ * @lineout_mode: Output mode for the LOUT/ROUT pins
+ * @headphone_mode: Output mode for the LHP/RHP pins
+ * @digmic_jackdetect_pin_mode: JACKDET/MICIN pin configuration
+ * @jackdetect_debounce_time: Jack insertion detection debounce time.
+ *  Note: This value will only be used, if the JACKDET/MICIN pin is configured
+ *  for jack insertion detection.
+ * @jackdetect_active_low: If true the jack insertion detection is active low.
+ *  Othwise it will be active high.
+ * @micbias_voltage: Microphone voltage bias
+ */
+struct adau1761_platform_data {
+	bool input_differential;
+	enum adau1761_output_mode lineout_mode;
+	enum adau1761_output_mode headphone_mode;
+
+	enum adau1761_digmic_jackdet_pin_mode digmic_jackdetect_pin_mode;
+
+	enum adau1761_jackdetect_debounce_time jackdetect_debounce_time;
+	bool jackdetect_active_low;
+
+	enum adau17x1_micbias_voltage micbias_voltage;
+};
+
+/**
+ * struct adau1781_platform_data - ADAU1781 Codec driver platform data
+ * @left_input_differential: If true configure the left input as
+ * differential input.
+ * @right_input_differential: If true configure the right input as differntial
+ *  input.
+ * @use_dmic: If true configure the MIC pins as digital microphone pins instead
+ *  of analog microphone pins.
+ * @micbias_voltage: Microphone voltage bias
+ */
+struct adau1781_platform_data {
+	bool left_input_differential;
+	bool right_input_differential;
+
+	bool use_dmic;
+
+	enum adau17x1_micbias_voltage micbias_voltage;
+};
+
+#endif
diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h
index b3ca1e94e0c8..7819fc787731 100644
--- a/include/linux/platform_data/at91_adc.h
+++ b/include/linux/platform_data/at91_adc.h
@@ -7,23 +7,10 @@
 #ifndef _AT91_ADC_H_
 #define _AT91_ADC_H_
 
-/**
- * struct at91_adc_reg_desc - Various informations relative to registers
- * @channel_base:	Base offset for the channel data registers
- * @drdy_mask:		Mask of the DRDY field in the relevant registers
-			(Interruptions registers mostly)
- * @status_register:	Offset of the Interrupt Status Register
- * @trigger_register:	Offset of the Trigger setup register
- * @mr_prescal_mask:	Mask of the PRESCAL field in the adc MR register
- * @mr_startup_mask:	Mask of the STARTUP field in the adc MR register
- */
-struct at91_adc_reg_desc {
-	u8	channel_base;
-	u32	drdy_mask;
-	u8	status_register;
-	u8	trigger_register;
-	u32	mr_prescal_mask;
-	u32	mr_startup_mask;
+enum atmel_adc_ts_type {
+	ATMEL_ADC_TOUCHSCREEN_NONE = 0,
+	ATMEL_ADC_TOUCHSCREEN_4WIRE = 4,
+	ATMEL_ADC_TOUCHSCREEN_5WIRE = 5,
 };
 
 /**
@@ -42,23 +29,21 @@ struct at91_adc_trigger {
 /**
  * struct at91_adc_data - platform data for ADC driver
  * @channels_used:		channels in use on the board as a bitmask
- * @num_channels:		global number of channels available on the board
- * @registers:			Registers definition on the board
  * @startup_time:		startup time of the ADC in microseconds
  * @trigger_list:		Triggers available in the ADC
  * @trigger_number:		Number of triggers available in the ADC
  * @use_external_triggers:	does the board has external triggers availables
  * @vref:			Reference voltage for the ADC in millivolts
+ * @touchscreen_type:		If a touchscreen is connected, its type (4 or 5 wires)
  */
 struct at91_adc_data {
 	unsigned long			channels_used;
-	u8				num_channels;
-	struct at91_adc_reg_desc	*registers;
 	u8				startup_time;
 	struct at91_adc_trigger		*trigger_list;
 	u8				trigger_number;
 	bool				use_external_triggers;
 	u16				vref;
+	enum atmel_adc_ts_type		touchscreen_type;
 };
 
 extern void __init at91_add_device_adc(struct at91_adc_data *data);
diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h
index e26b0c14edea..4b452c6a2f7b 100644
--- a/include/linux/platform_data/atmel.h
+++ b/include/linux/platform_data/atmel.h
@@ -84,14 +84,6 @@ struct atmel_uart_data {
 	short			use_dma_rx;	/* use receive DMA? */
 	void __iomem		*regs;		/* virt. base address, if any */
 	struct serial_rs485	rs485;		/* rs485 settings */
-	int			rts_gpio;	/* optional RTS GPIO */
-};
-
- /* Touchscreen Controller */
-struct at91_tsadcc_data {
-	unsigned int    adc_clock;
-	u8		pendet_debounce;
-	u8		ts_sample_hold_time;
 };
 
 /* CAN */
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
index f50821cb64be..eb8d5627d080 100644
--- a/include/linux/platform_data/edma.h
+++ b/include/linux/platform_data/edma.h
@@ -43,15 +43,15 @@
 
 /* PaRAM slots are laid out like this */
 struct edmacc_param {
-	unsigned int opt;
-	unsigned int src;
-	unsigned int a_b_cnt;
-	unsigned int dst;
-	unsigned int src_dst_bidx;
-	unsigned int link_bcntrld;
-	unsigned int src_dst_cidx;
-	unsigned int ccnt;
-};
+	u32 opt;
+	u32 src;
+	u32 a_b_cnt;
+	u32 dst;
+	u32 src_dst_bidx;
+	u32 link_bcntrld;
+	u32 src_dst_cidx;
+	u32 ccnt;
+} __packed;
 
 /* fields in edmacc_param.opt */
 #define SAM		BIT(0)
@@ -130,7 +130,7 @@ void edma_set_src(unsigned slot, dma_addr_t src_port,
 				enum address_mode mode, enum fifo_width);
 void edma_set_dest(unsigned slot, dma_addr_t dest_port,
 				 enum address_mode mode, enum fifo_width);
-void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
+dma_addr_t edma_get_position(unsigned slot, bool dst);
 void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
 void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
 void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
@@ -158,13 +158,6 @@ struct edma_rsv_info {
 
 /* platform_data for EDMA driver */
 struct edma_soc_info {
-
-	/* how many dma resources of each type */
-	unsigned	n_channel;
-	unsigned	n_region;
-	unsigned	n_slot;
-	unsigned	n_tc;
-	unsigned	n_cc;
 	/*
 	 * Default queue is expected to be a low-priority queue.
 	 * This way, long transfers on the default queue started
@@ -175,7 +168,6 @@ struct edma_soc_info {
 	/* Resource reservation for other cores */
 	struct edma_rsv_info	*rsv;
 
-	s8	(*queue_tc_mapping)[2];
 	s8	(*queue_priority_mapping)[2];
 	const s16	(*xbar_chans)[2];
 };
diff --git a/include/linux/platform_data/ipmmu-vmsa.h b/include/linux/platform_data/ipmmu-vmsa.h
new file mode 100644
index 000000000000..5275b3ac6d37
--- /dev/null
+++ b/include/linux/platform_data/ipmmu-vmsa.h
@@ -0,0 +1,24 @@
+/*
+ * IPMMU VMSA Platform Data
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#ifndef __IPMMU_VMSA_H__
+#define __IPMMU_VMSA_H__
+
+struct ipmmu_vmsa_master {
+	const char *name;
+	unsigned int utlb;
+};
+
+struct ipmmu_vmsa_platform_data {
+	const struct ipmmu_vmsa_master *masters;
+	unsigned int num_masters;
+};
+
+#endif /* __IPMMU_VMSA_H__ */
diff --git a/include/linux/platform_data/max3421-hcd.h b/include/linux/platform_data/max3421-hcd.h
new file mode 100644
index 000000000000..0303d1970084
--- /dev/null
+++ b/include/linux/platform_data/max3421-hcd.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2014 eGauge Systems LLC
+ *	Contributed by David Mosberger-Tang <davidm@egauge.net>
+ *
+ * Platform-data structure for MAX3421 USB HCD driver.
+ *
+ */
+#ifndef MAX3421_HCD_PLAT_H_INCLUDED
+#define MAX3421_HCD_PLAT_H_INCLUDED
+
+/*
+ * This structure defines the mapping of certain auxiliary functions to the
+ * MAX3421E GPIO pins.  The chip has eight GP inputs and eight GP outputs.
+ * A value of 0 indicates that the pin is not used/wired to anything.
+ *
+ * At this point, the only control the max3421-hcd driver cares about is
+ * to control Vbus (5V to the peripheral).
+ */
+struct max3421_hcd_platform_data {
+	u8 vbus_gpout;			/* pin controlling Vbus */
+	u8 vbus_active_level;		/* level that turns on power */
+};
+
+#endif /* MAX3421_HCD_PLAT_H_INCLUDED */
diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h
deleted file mode 100644
index c2fd9024717c..000000000000
--- a/include/linux/platform_data/mipi-csis.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2010 - 2012 Samsung Electronics Co., Ltd.
- *
- * Samsung S5P/Exynos SoC series MIPI CSIS device support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
-#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
-
-/**
- * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
- * @clk_rate:    bus clock frequency
- * @wclk_source: CSI wrapper clock selection: 0 - bus clock, 1 - ext. SCLK_CAM
- * @lanes:       number of data lanes used
- * @hs_settle:   HS-RX settle time
- */
-struct s5p_platform_mipi_csis {
-	unsigned long clk_rate;
-	u8 wclk_source;
-	u8 lanes;
-	u8 hs_settle;
-};
-
-#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
diff --git a/include/linux/platform_data/syscon.h b/include/linux/platform_data/syscon.h
new file mode 100644
index 000000000000..2354c6fa3726
--- /dev/null
+++ b/include/linux/platform_data/syscon.h
@@ -0,0 +1,8 @@
+#ifndef PLATFORM_DATA_SYSCON_H
+#define PLATFORM_DATA_SYSCON_H
+
+struct syscon_platform_data {
+	const char *label;
+};
+
+#endif