Merge 4.4.294 into android-4.4-p

Changes in 4.4.294
	staging: ion: Prevent incorrect reference counting behavour
	USB: serial: option: add Telit LE910S1 0x9200 composition
	USB: serial: option: add Fibocom FM101-GL variants
	usb: hub: Fix usb enumeration issue due to address0 race
	usb: hub: Fix locking issues with address0_mutex
	binder: fix test regression due to sender_euid change
	ALSA: ctxfi: Fix out-of-range access
	staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect()
	xen: don't continue xenstore initialization in case of errors
	xen: detect uninitialized xenbus in xenbus_init
	ARM: dts: BCM5301X: Add interrupt properties to GPIO node
	ASoC: topology: Add missing rwsem around snd_ctl_remove() calls
	net: ieee802154: handle iftypes as u32
	NFSv42: Don't fail clone() unless the OP_CLONE operation failed
	ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE
	scsi: mpt3sas: Fix kernel panic during drive powercycle test
	tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows
	tracing: Check pid filtering when creating events
	hugetlbfs: flush TLBs correctly after huge_pmd_unshare
	proc/vmcore: fix clearing user buffer by properly using clear_user()
	NFC: add NCI_UNREG flag to eliminate the race
	fuse: fix page stealing
	fuse: release pipe buf after last use
	shm: extend forced shm destroy to support objects from several IPC nses
	xen: sync include/xen/interface/io/ring.h with Xen's newest version
	xen/blkfront: read response from backend only once
	xen/blkfront: don't take local copy of a request from the ring page
	xen/blkfront: don't trust the backend response data blindly
	xen/netfront: read response from backend only once
	xen/netfront: don't read data from request on the ring page
	xen/netfront: disentangle tx_skb_freelist
	xen/netfront: don't trust the backend response data blindly
	tty: hvc: replace BUG_ON() with negative return value
	hugetlb: take PMD sharing into account when flushing tlb/caches
	net: return correct error code
	platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep
	s390/setup: avoid using memblock_enforce_memory_limit
	scsi: iscsi: Unblock session then wake up error handler
	net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound
	net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()
	kprobes: Limit max data_size of the kretprobe instances
	sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
	sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
	fs: add fget_many() and fput_many()
	fget: check that the fd still exists after getting a ref to it
	natsemi: xtensa: fix section mismatch warnings
	net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()
	siphash: use _unaligned version by default
	parisc: Fix "make install" on newer debian releases
	vgacon: Propagate console boot parameters before calling `vc_resize'
	tty: serial: msm_serial: Deactivate RX DMA for polling support
	serial: pl011: Add ACPI SBSA UART match id
	Linux 4.4.294

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Id3cafc33da957a0501bcf61d000025167d552797

2 files changed, 23 insertions, 5 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 6910a6d7c63e..66dda8d018ca 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4393,8 +4393,6 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
 	if (oldspeed == USB_SPEED_LOW)
 		delay = HUB_LONG_RESET_TIME;
 
-	mutex_lock(hcd->address0_mutex);
-
 	/* Reset the device; full speed may morph to high speed */
 	/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
 	retval = hub_port_reset(hub, port1, udev, delay, false);
@@ -4681,7 +4679,6 @@ fail:
 		hub_port_disable(hub, port1, 0);
 		update_devnum(udev, devnum);	/* for disconnect processing */
 	}
-	mutex_unlock(hcd->address0_mutex);
 	return retval;
 }
 
@@ -4771,6 +4768,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 	struct usb_port *port_dev = hub->ports[port1 - 1];
 	struct usb_device *udev = port_dev->child;
 	static int unreliable_port = -1;
+	bool retry_locked;
 
 	/* Disconnect any existing devices under this port */
 	if (udev) {
@@ -4826,7 +4824,11 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		unit_load = 100;
 
 	status = 0;
+
 	for (i = 0; i < SET_CONFIG_TRIES; i++) {
+		usb_lock_port(port_dev);
+		mutex_lock(hcd->address0_mutex);
+		retry_locked = true;
 
 		/* reallocate for each attempt, since references
 		 * to the previous one can escape in various ways
@@ -4835,6 +4837,8 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		if (!udev) {
 			dev_err(&port_dev->dev,
 					"couldn't allocate usb_device\n");
+			mutex_unlock(hcd->address0_mutex);
+			usb_unlock_port(port_dev);
 			goto done;
 		}
 
@@ -4856,12 +4860,14 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		}
 
 		/* reset (non-USB 3.0 devices) and get descriptor */
-		usb_lock_port(port_dev);
 		status = hub_port_init(hub, udev, port1, i);
-		usb_unlock_port(port_dev);
 		if (status < 0)
 			goto loop;
 
+		mutex_unlock(hcd->address0_mutex);
+		usb_unlock_port(port_dev);
+		retry_locked = false;
+
 		if (udev->quirks & USB_QUIRK_DELAY_INIT)
 			msleep(2000);
 
@@ -4954,6 +4960,10 @@ loop:
 		usb_ep0_reinit(udev);
 		release_devnum(udev);
 		hub_free_dev(udev);
+		if (retry_locked) {
+			mutex_unlock(hcd->address0_mutex);
+			usb_unlock_port(port_dev);
+		}
 		usb_put_dev(udev);
 		if ((status == -ENOTCONN) || (status == -ENOTSUPP))
 			break;
@@ -5506,6 +5516,8 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	bos = udev->bos;
 	udev->bos = NULL;
 
+	mutex_lock(hcd->address0_mutex);
+
 	for (i = 0; i < SET_CONFIG_TRIES; ++i) {
 
 		/* ep0 maxpacket size may change; let the HCD know about it.
@@ -5515,6 +5527,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 		if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV)
 			break;
 	}
+	mutex_unlock(hcd->address0_mutex);
 
 	if (ret < 0)
 		goto re_enumerate;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 9a0f8ee8cbd9..502931f658a8 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1243,6 +1243,8 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = NCTRL(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, 0x9010),				/* Telit SBL FN980 flashing device */
 	  .driver_info = NCTRL(0) | ZLP },
+	{ USB_DEVICE(TELIT_VENDOR_ID, 0x9200),				/* Telit LE910S1 flashing device */
+	  .driver_info = NCTRL(0) | ZLP },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) },
@@ -2072,6 +2074,9 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) },	/* Fibocom FG150 Diag */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) },		/* Fibocom FG150 AT */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) },			/* Fibocom FM101-GL (laptop MBIM) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff),			/* Fibocom FM101-GL (laptop MBIM) */
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */