diff options
| author | Runmin Wang <runminw@codeaurora.org> | 2017-03-16 14:44:48 -0700 |
|---|---|---|
| committer | Runmin Wang <runminw@codeaurora.org> | 2017-03-18 08:55:10 -0700 |
| commit | 78cbd38fd58116df6d09bfc6166cf57b90d0711d (patch) | |
| tree | e412b9e8b42c65e150f904d94e2cd27c40c26cf7 /drivers/usb | |
| parent | 6f55033ecf068f77136caac2e7c4a7869b3ec2bd (diff) | |
| parent | 26c815656d14b133b04936f384f5a55fceb2e835 (diff) | |
Merge tag 'lsk-v4.4-17.02-android' into branch 'msm-4.4'
* refs/heads/tmp-26c8156:
Linux 4.4.49
drm/i915: fix use-after-free in page_flip_completed()
ALSA: seq: Don't handle loop timeout at snd_seq_pool_done()
ALSA: seq: Fix race at creating a queue
xen-netfront: Delete rx_refill_timer in xennet_disconnect_backend()
scsi: mpt3sas: disable ASPM for MPI2 controllers
scsi: aacraid: Fix INTx/MSI-x issue with older controllers
scsi: zfcp: fix use-after-free by not tracing WKA port open/close on failed send
netvsc: Set maximum GSO size in the right place
mac80211: Fix adding of mesh vendor IEs
ARM: 8642/1: LPAE: catch pending imprecise abort on unmask
target: Fix COMPARE_AND_WRITE ref leak for non GOOD status
target: Fix early transport_generic_handle_tmr abort scenario
target: Use correct SCSI status during EXTENDED_COPY exception
target: Don't BUG_ON during NodeACL dynamic -> explicit conversion
ARM: 8643/3: arm/ptrace: Preserve previous registers for short regset write
hns: avoid stack overflow with CONFIG_KASAN
cpumask: use nr_cpumask_bits for parsing functions
Revert "x86/ioapic: Restore IO-APIC irq_chip retrigger callback"
selinux: fix off-by-one in setprocattr
ARC: [arcompact] brown paper bag bug in unaligned access delay slot fixup
Linux 4.4.48
base/memory, hotplug: fix a kernel oops in show_valid_zones()
x86/irq: Make irq activate operations symmetric
USB: serial: option: add device ID for HP lt2523 (Novatel E371)
usb: gadget: f_fs: Assorted buffer overflow checks.
USB: Add quirk for WORLDE easykey.25 MIDI keyboard
USB: serial: pl2303: add ATEN device ID
USB: serial: qcserial: add Dell DW5570 QDL
KVM: x86: do not save guest-unsupported XSAVE state
HID: wacom: Fix poor prox handling in 'wacom_pl_irq'
percpu-refcount: fix reference leak during percpu-atomic transition
mmc: sdhci: Ignore unexpected CARD_INT interrupts
can: bcm: fix hrtimer/tasklet termination in bcm op removal
mm, fs: check for fatal signals in do_generic_file_read()
mm/memory_hotplug.c: check start_pfn in test_pages_in_a_zone()
cifs: initialize file_info_lock
zswap: disable changing params if init fails
svcrpc: fix oops in absence of krb5 module
NFSD: Fix a null reference case in find_or_create_lock_stateid()
powerpc: Add missing error check to prom_find_boot_cpu()
powerpc/eeh: Fix wrong flag passed to eeh_unfreeze_pe()
libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices
ata: sata_mv:- Handle return value of devm_ioremap.
perf/core: Fix PERF_RECORD_MMAP2 prot/flags for anonymous memory
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes
crypto: api - Clear CRYPTO_ALG_DEAD bit before registering an alg
drm/nouveau/nv1a,nv1f/disp: fix memory clock rate retrieval
drm/nouveau/disp/gt215: Fix HDA ELD handling (thus, HDMI audio) on gt215
ext4: validate s_first_meta_bg at mount time
PCI/ASPM: Handle PCI-to-PCIe bridges as roots of PCIe hierarchies
ANDROID: security: export security_path_chown()
Linux 4.4.47
net: dsa: Bring back device detaching in dsa_slave_suspend()
qmi_wwan/cdc_ether: add device ID for HP lt2523 (Novatel E371) WWAN card
af_unix: move unix_mknod() out of bindlock
r8152: don't execute runtime suspend if the tx is not empty
bridge: netlink: call br_changelink() during br_dev_newlink()
tcp: initialize max window for a new fastopen socket
ipv6: addrconf: Avoid addrconf_disable_change() using RCU read-side lock
net: phy: bcm63xx: Utilize correct config_intr function
net: fix harmonize_features() vs NETIF_F_HIGHDMA
ax25: Fix segfault after sock connection timeout
ravb: do not use zero-length alignment DMA descriptor
openvswitch: maintain correct checksum state in conntrack actions
tcp: fix tcp_fastopen unaligned access complaints on sparc
net: systemport: Decouple flow control from __bcm_sysport_tx_reclaim
net: ipv4: fix table id in getroute response
net: lwtunnel: Handle lwtunnel_fill_encap failure
mlxsw: pci: Fix EQE structure definition
mlxsw: switchx2: Fix memory leak at skb reallocation
mlxsw: spectrum: Fix memory leak at skb reallocation
r8152: fix the sw rx checksum is unavailable
ANDROID: sdcardfs: Switch strcasecmp for internal call
ANDROID: sdcardfs: switch to full_name_hash and qstr
ANDROID: sdcardfs: Add GID Derivation to sdcardfs
ANDROID: sdcardfs: Remove redundant operation
ANDROID: sdcardfs: add support for user permission isolation
ANDROID: sdcardfs: Refactor configfs interface
ANDROID: sdcardfs: Allow non-owners to touch
ANDROID: binder: fix format specifier for type binder_size_t
ANDROID: fs: Export vfs_rmdir2
ANDROID: fs: Export free_fs_struct and set_fs_pwd
ANDROID: mnt: remount should propagate to slaves of slaves
ANDROID: sdcardfs: Switch ->d_inode to d_inode()
ANDROID: sdcardfs: Fix locking issue with permision fix up
ANDROID: sdcardfs: Change magic value
ANDROID: sdcardfs: Use per mount permissions
ANDROID: sdcardfs: Add gid and mask to private mount data
ANDROID: sdcardfs: User new permission2 functions
ANDROID: vfs: Add setattr2 for filesystems with per mount permissions
ANDROID: vfs: Add permission2 for filesystems with per mount permissions
ANDROID: vfs: Allow filesystems to access their private mount data
ANDROID: mnt: Add filesystem private data to mount points
ANDROID: sdcardfs: Move directory unlock before touch
ANDROID: sdcardfs: fix external storage exporting incorrect uid
ANDROID: sdcardfs: Added top to sdcardfs_inode_info
ANDROID: sdcardfs: Switch package list to RCU
ANDROID: sdcardfs: Fix locking for permission fix up
ANDROID: sdcardfs: Check for other cases on path lookup
ANDROID: sdcardfs: override umask on mkdir and create
Linux 4.4.46
mm, memcg: do not retry precharge charges
platform/x86: intel_mid_powerbtn: Set IRQ_ONESHOT
pinctrl: broxton: Use correct PADCFGLOCK offset
s5k4ecgx: select CRC32 helper
IB/umem: Release pid in error and ODP flow
IB/ipoib: move back IB LL address into the hard header
drm/i915: Don't leak edid in intel_crt_detect_ddc()
SUNRPC: cleanup ida information when removing sunrpc module
NFSv4.0: always send mode in SETATTR after EXCLUSIVE4
nfs: Don't increment lock sequence ID after NFS4ERR_MOVED
parisc: Don't use BITS_PER_LONG in userspace-exported swab.h header
ARC: [arcompact] handle unaligned access delay slot corner case
ARC: udelay: fix inline assembler by adding LP_COUNT to clobber list
can: ti_hecc: add missing prepare and unprepare of the clock
can: c_can_pci: fix null-pointer-deref in c_can_start() - set device pointer
s390/ptrace: Preserve previous registers for short regset write
RDMA/cma: Fix unknown symbol when CONFIG_IPV6 is not enabled
ISDN: eicon: silence misleading array-bounds warning
sysctl: fix proc_doulongvec_ms_jiffies_minmax()
mm/mempolicy.c: do not put mempolicy before using its nodemask
drm: Fix broken VT switch with video=1366x768 option
tile/ptrace: Preserve previous registers for short regset write
fbdev: color map copying bounds checking
Linux 4.4.45
arm64: avoid returning from bad_mode
selftest/powerpc: Wrong PMC initialized in pmc56_overflow test
dmaengine: pl330: Fix runtime PM support for terminated transfers
ite-cir: initialize use_demodulator before using it
blackfin: check devm_pinctrl_get() for errors
ARM: 8613/1: Fix the uaccess crash on PB11MPCore
ARM: ux500: fix prcmu_is_cpu_in_wfi() calculation
ARM: dts: imx6qdl-nitrogen6_max: fix sgtl5000 pinctrl init
arm64/ptrace: Reject attempts to set incomplete hardware breakpoint fields
arm64/ptrace: Avoid uninitialised struct padding in fpr_set()
arm64/ptrace: Preserve previous registers for short regset write - 3
arm64/ptrace: Preserve previous registers for short regset write - 2
arm64/ptrace: Preserve previous registers for short regset write
ARM: dts: da850-evm: fix read access to SPI flash
ceph: fix bad endianness handling in parse_reply_info_extra
ARM: 8634/1: hw_breakpoint: blacklist Scorpion CPUs
svcrdma: avoid duplicate dma unmapping during error recovery
clocksource/exynos_mct: Clear interrupt when cpu is shut down
ubifs: Fix journal replay wrt. xattr nodes
qla2xxx: Fix crash due to null pointer access
x86/ioapic: Restore IO-APIC irq_chip retrigger callback
mtd: nand: xway: disable module support
ieee802154: atusb: do not use the stack for buffers to make them DMA able
mmc: mxs-mmc: Fix additional cycles after transmission stop
HID: corsair: fix control-transfer error handling
HID: corsair: fix DMA buffers on stack
PCI: Enumerate switches below PCI-to-PCIe bridges
fuse: clear FR_PENDING flag when moving requests out of pending queue
svcrpc: don't leak contexts on PROC_DESTROY
x86/PCI: Ignore _CRS on Supermicro X8DTH-i/6/iF/6F
tmpfs: clear S_ISGID when setting posix ACLs
ARM: dts: imx31: fix AVIC base address
ARM: dts: imx31: move CCM device node to AIPS2 bus devices
ARM: dts: imx31: fix clock control module interrupts description
perf scripting: Avoid leaking the scripting_context variable
IB/IPoIB: Remove can't use GFP_NOIO warning
IB/mlx4: When no DMFS for IPoIB, don't allow NET_IF QPs
IB/mlx4: Fix port query for 56Gb Ethernet links
IB/mlx4: Fix out-of-range array index in destroy qp flow
IB/mlx4: Set traffic class in AH
IB/mlx5: Wait for all async command completions to complete
ftrace/x86: Set ftrace_stub to weak to prevent gcc from using short jumps to it
Linux 4.4.44
pinctrl: sh-pfc: Do not unconditionally support PIN_CONFIG_BIAS_DISABLE
powerpc/ibmebus: Fix device reference leaks in sysfs interface
powerpc/ibmebus: Fix further device reference leaks
bus: vexpress-config: fix device reference leak
blk-mq: Always schedule hctx->next_cpu
ACPI / APEI: Fix NMI notification handling
block: cfq_cpd_alloc() should use @gfp
cpufreq: powernv: Disable preemption while checking CPU throttling state
NFSv4.1: nfs4_fl_prepare_ds must be careful about reporting success.
NFS: Fix a performance regression in readdir
pNFS: Fix race in pnfs_wait_on_layoutreturn
pinctrl: meson: fix gpio request disabling other modes
btrfs: fix error handling when run_delayed_extent_op fails
btrfs: fix locking when we put back a delayed ref that's too new
x86/cpu: Fix bootup crashes by sanitizing the argument of the 'clearcpuid=' command-line option
USB: serial: ch341: fix modem-control and B0 handling
USB: serial: ch341: fix resume after reset
drm/radeon: drop verde dpm quirks
sysctl: Drop reference added by grab_header in proc_sys_readdir
sysrq: attach sysrq handler correctly for 32-bit kernel
tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx
mnt: Protect the mountpoint hashtable with mount_lock
vme: Fix wrong pointer utilization in ca91cx42_slave_get
xhci: fix deadlock at host remove by running watchdog correctly
i2c: fix kernel memory disclosure in dev interface
i2c: print correct device invalid address
Input: elants_i2c - avoid divide by 0 errors on bad touchscreen data
USB: serial: ch341: fix open and resume after B0
USB: serial: ch341: fix control-message error handling
USB: serial: ch341: fix open error handling
USB: serial: ch341: fix initial modem-control state
USB: serial: kl5kusb105: fix line-state error handling
nl80211: fix sched scan netlink socket owner destruction
KVM: x86: Introduce segmented_write_std
KVM: x86: emulate FXSAVE and FXRSTOR
KVM: x86: add asm_safe wrapper
KVM: x86: add Align16 instruction flag
KVM: x86: flush pending lapic jump label updates on module unload
jump_labels: API for flushing deferred jump label updates
KVM: eventfd: fix NULL deref irqbypass consumer
KVM: x86: fix emulation of "MOV SS, null selector"
mm/hugetlb.c: fix reservation race when freeing surplus pages
ocfs2: fix crash caused by stale lvb with fsdlm plugin
mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}
selftests: do not require bash for the generated test
selftests: do not require bash to run netsocktests testcase
Input: i8042 - add Pegatron touchpad to noloop table
Input: xpad - use correct product id for x360w controllers
DEBUG: sched/fair: Fix sched_load_avg_cpu events for task_groups
DEBUG: sched/fair: Fix missing sched_load_avg_cpu events
net: socket: don't set sk_uid to garbage value in ->setattr()
ANDROID: configs: CONFIG_ARM64_SW_TTBR0_PAN=y
UPSTREAM: arm64: Disable PAN on uaccess_enable()
UPSTREAM: arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN
UPSTREAM: arm64: xen: Enable user access before a privcmd hvc call
UPSTREAM: arm64: Handle faults caused by inadvertent user access with PAN enabled
BACKPORT: arm64: Disable TTBR0_EL1 during normal kernel execution
BACKPORT: arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1
BACKPORT: arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro
BACKPORT: arm64: Factor out PAN enabling/disabling into separate uaccess_* macros
UPSTREAM: arm64: alternative: add auto-nop infrastructure
UPSTREAM: arm64: barriers: introduce nops and __nops macros for NOP sequences
Revert "FROMLIST: arm64: Factor out PAN enabling/disabling into separate uaccess_* macros"
Revert "FROMLIST: arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro"
Revert "FROMLIST: arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1"
Revert "FROMLIST: arm64: Disable TTBR0_EL1 during normal kernel execution"
Revert "FROMLIST: arm64: Handle faults caused by inadvertent user access with PAN enabled"
Revert "FROMLIST: arm64: xen: Enable user access before a privcmd hvc call"
Revert "FROMLIST: arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN"
ANDROID: sched/walt: fix build failure if FAIR_GROUP_SCHED=n
Linux 4.4.43
mm/init: fix zone boundary creation
ALSA: usb-audio: Add a quirk for Plantronics BT600
spi: mvebu: fix baudrate calculation for armada variant
ARM: OMAP4+: Fix bad fallthrough for cpuidle
ARM: zynq: Reserve correct amount of non-DMA RAM
powerpc: Fix build warning on 32-bit PPC
ALSA: firewire-tascam: Fix to handle error from initialization of stream data
HID: hid-cypress: validate length of report
net: vrf: do not allow table id 0
net: ipv4: Fix multipath selection with vrf
gro: Disable frag0 optimization on IPv6 ext headers
gro: use min_t() in skb_gro_reset_offset()
gro: Enter slow-path if there is no tailroom
r8152: fix rx issue for runtime suspend
r8152: split rtl8152_suspend function
ipv4: Do not allow MAIN to be alias for new LOCAL w/ custom rules
igmp: Make igmp group member RFC 3376 compliant
drop_monitor: consider inserted data in genlmsg_end
drop_monitor: add missing call to genlmsg_end
net/mlx5: Avoid shadowing numa_node
net/mlx5: Check FW limitations on log_max_qp before setting it
net: stmmac: Fix race between stmmac_drv_probe and stmmac_open
net, sched: fix soft lockup in tc_classify
ipv6: handle -EFAULT from skb_copy_bits
net: vrf: Drop conntrack data after pass through VRF device on Tx
ser_gigaset: return -ENOMEM on error instead of success
netvsc: reduce maximum GSO size
Linux 4.4.42
usb: gadget: composite: always set ep->mult to a sensible value
Revert "usb: gadget: composite: always set ep->mult to a sensible value"
tick/broadcast: Prevent NULL pointer dereference
drm/radeon: Always store CRTC relative radeon_crtc->cursor_x/y values
cx23885-dvb: move initialization of a8293_pdata
net: vxge: avoid unused function warnings
net: ti: cpmac: Fix compiler warning due to type confusion
cred/userns: define current_user_ns() as a function
staging: comedi: dt282x: tidy up register bit defines
powerpc/pci/rpadlpar: Fix device reference leaks
md: MD_RECOVERY_NEEDED is set for mddev->recovery
crypto: arm64/aes-ce - fix for big endian
crypto: arm64/aes-xts-ce: fix for big endian
crypto: arm64/sha1-ce - fix for big endian
crypto: arm64/aes-neon - fix for big endian
crypto: arm64/aes-ccm-ce: fix for big endian
crypto: arm/aes-ce - fix for big endian
crypto: arm64/ghash-ce - fix for big endian
crypto: arm64/sha2-ce - fix for big endian
s390/crypto: unlock on error in prng_tdes_read()
mmc: mmc_test: Uninitialized return value
PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend
irqchip/bcm7038-l1: Implement irq_cpu_offline() callback
target/iscsi: Fix double free in lio_target_tiqn_addtpg()
scsi: mvsas: fix command_active typo
ASoC: samsung: i2s: Fixup last IRQ unsafe spin lock call
iommu/vt-d: Flush old iommu caches for kdump when the device gets context mapped
iommu/vt-d: Fix pasid table size encoding
iommu/amd: Fix the left value check of cmd buffer
iommu/amd: Missing error code in amd_iommu_init_device()
clk: imx31: fix rewritten input argument of mx31_clocks_init()
clk: clk-wm831x: fix a logic error
hwmon: (g762) Fix overflows and crash seen when writing limit attributes
hwmon: (nct7802) Fix overflows seen when writing into limit attributes
hwmon: (ds620) Fix overflows seen when writing temperature limits
hwmon: (amc6821) sign extension temperature
hwmon: (scpi) Fix module autoload
cris: Only build flash rescue image if CONFIG_ETRAX_AXISFLASHMAP is selected
ath10k: use the right length of "background"
stable-fixup: hotplug: fix unused function warning
usb: dwc3: ep0: explicitly call dwc3_ep0_prepare_one_trb()
usb: dwc3: ep0: add dwc3_ep0_prepare_one_trb()
usb: dwc3: gadget: always unmap EP0 requests
staging: iio: ad7606: fix improper setting of oversampling pins
mei: bus: fix mei_cldev_enable KDoc
USB: serial: io_ti: bind to interface after fw download
USB: phy: am335x-control: fix device and of_node leaks
ARM: dts: r8a7794: Correct hsusb parent clock
USB: serial: kl5kusb105: abort on open exception path
ALSA: usb-audio: Fix bogus error return in snd_usb_create_stream()
usb: musb: blackfin: add bfin_fifo_offset in bfin_ops
usb: hub: Move hub_port_disable() to fix warning if PM is disabled
usb: musb: Fix trying to free already-free IRQ 4
usb: dwc3: pci: add Intel Gemini Lake PCI ID
xhci: Fix race related to abort operation
xhci: Use delayed_work instead of timer for command timeout
usb: xhci-mem: use passed in GFP flags instead of GFP_KERNEL
USB: serial: mos7720: fix parallel probe
USB: serial: mos7720: fix parport use-after-free on probe errors
USB: serial: mos7720: fix use-after-free on probe errors
USB: serial: mos7720: fix NULL-deref at open
USB: serial: mos7840: fix NULL-deref at open
USB: serial: kobil_sct: fix NULL-deref in write
USB: serial: cyberjack: fix NULL-deref at open
USB: serial: oti6858: fix NULL-deref at open
USB: serial: io_edgeport: fix NULL-deref at open
USB: serial: ti_usb_3410_5052: fix NULL-deref at open
USB: serial: garmin_gps: fix memory leak on failed URB submit
USB: serial: iuu_phoenix: fix NULL-deref at open
USB: serial: io_ti: fix I/O after disconnect
USB: serial: io_ti: fix another NULL-deref at open
USB: serial: io_ti: fix NULL-deref at open
USB: serial: spcp8x5: fix NULL-deref at open
USB: serial: keyspan_pda: verify endpoints at probe
USB: serial: pl2303: fix NULL-deref at open
USB: serial: quatech2: fix sleep-while-atomic in close
USB: serial: omninet: fix NULL-derefs at open and disconnect
usb: xhci: hold lock over xhci_abort_cmd_ring()
xhci: Handle command completion and timeout race
usb: host: xhci: Fix possible wild pointer when handling abort command
usb: xhci: fix return value of xhci_setup_device()
xhci: free xhci virtual devices with leaf nodes first
usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Apollo Lake
xhci: workaround for hosts missing CAS bit
usb: xhci: fix possible wild pointer
usb: dwc3: core: avoid Overflow events
usb: gadget: composite: Test get_alt() presence instead of set_alt()
USB: dummy-hcd: fix bug in stop_activity (handle ep0)
USB: fix problems with duplicate endpoint addresses
USB: gadgetfs: fix checks of wTotalLength in config descriptors
USB: gadgetfs: fix use-after-free bug
USB: gadgetfs: fix unbounded memory allocation bug
usb: gadgetfs: restrict upper bound on device configuration size
usb: storage: unusual_uas: Add JMicron JMS56x to unusual device
usb: musb: dsps: implement clear_ep_rxintr() callback
usb: musb: core: add clear_ep_rxintr() to musb_platform_ops
KVM: MIPS: Flush KVM entry code from icache globally
KVM: x86: reset MMU on KVM_SET_VCPU_EVENTS
mac80211: initialize fast-xmit 'info' later
ARM: davinci: da850: don't add emac clock to lookup table twice
ALSA: usb-audio: Fix irq/process data synchronization
ALSA: hda - Apply asus-mode8 fixup to ASUS X71SL
ALSA: hda - Fix up GPIO for ASUS ROG Ranger
Linux 4.4.41
net: mvpp2: fix dma unmapping of TX buffers for fragments
sg_write()/bsg_write() is not fit to be called under KERNEL_DS
kconfig/nconf: Fix hang when editing symbol with a long prompt
target/user: Fix use-after-free of tcmu_cmds if they are expired
powerpc: Convert cmp to cmpd in idle enter sequence
powerpc/ps3: Fix system hang with GCC 5 builds
nfs_write_end(): fix handling of short copies
libceph: verify authorize reply on connect
PCI: Check for PME in targeted sleep state
Input: drv260x - fix input device's parent assignment
media: solo6x10: fix lockup by avoiding delayed register write
IB/cma: Fix a race condition in iboe_addr_get_sgid()
IB/multicast: Check ib_find_pkey() return value
IPoIB: Avoid reading an uninitialized member variable
IB/mad: Fix an array index check
fgraph: Handle a case where a tracer ignores set_graph_notrace
platform/x86: asus-nb-wmi.c: Add X45U quirk
ftrace/x86_32: Set ftrace_stub to weak to prevent gcc from using short jumps to it
kvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF)
KVM: PPC: Book3S HV: Don't lose hardware R/C bit updates in H_PROTECT
KVM: PPC: Book3S HV: Save/restore XER in checkpointed register state
md/raid5: limit request size according to implementation limits
sc16is7xx: Drop bogus use of IRQF_ONESHOT
s390/vmlogrdr: fix IUCV buffer allocation
firmware: fix usermode helper fallback loading
ARC: mm: arc700: Don't assume 2 colours for aliasing VIPT dcache
scsi: avoid a permanent stop of the scsi device's request queue
scsi: zfcp: fix rport unblock race with LUN recovery
scsi: zfcp: do not trace pure benign residual HBA responses at default level
scsi: zfcp: fix use-after-"free" in FC ingress path after TMF
scsi: megaraid_sas: Do not set MPI2_TYPE_CUDA for JBOD FP path for FW which does not support JBOD sequence map
scsi: megaraid_sas: For SRIOV enabled firmware, ensure VF driver waits for 30secs before reset
vt: fix Scroll Lock LED trigger name
block: protect iterate_bdevs() against concurrent close
mei: request async autosuspend at the end of enumeration
drivers/gpu/drm/ast: Fix infinite loop if read fails
drm/gma500: Add compat ioctl
drm/radeon: add additional pci revision to dpm workaround
drm/radeon: Hide the HW cursor while it's out of bounds
drm/radeon: Also call cursor_move_locked when the cursor size changes
drm/nouveau/i2c/gk110b,gm10x: use the correct implementation
drm/nouveau/fifo/gf100-: protect channel preempt with subdev mutex
drm/nouveau/ltc: protect clearing of comptags with mutex
drm/nouveau/bios: require checksum to match for fast acpi shadow method
drm/nouveau/kms: lvds panel strap moved again on maxwell
ACPI / video: Add force_native quirk for HP Pavilion dv6
ACPI / video: Add force_native quirk for Dell XPS 17 L702X
staging: comedi: ni_mio_common: fix E series ni_ai_insn_read() data
staging: comedi: ni_mio_common: fix M Series ni_ai_insn_read() data mask
thermal: hwmon: Properly report critical temperature in sysfs
clk: bcm2835: Avoid overwriting the div info when disabling a pll_div clk
timekeeping_Force_unsigned_clocksource_to_nanoseconds_conversion
regulator: stw481x-vmmc: fix ages old enable error
mmc: sdhci: Fix recovery from tuning timeout
ath9k: Really fix LED polarity for some Mini PCI AR9220 MB92 cards.
cfg80211/mac80211: fix BSS leaks when abandoning assoc attempts
rtlwifi: Fix enter/exit power_save
ssb: Fix error routine when fallback SPROM fails
Linux 4.4.40
ppp: defer netns reference release for ppp channel
driver core: fix race between creating/querying glue dir and its cleanup
xfs: set AGI buffer type in xlog_recover_clear_agi_bucket
arm/xen: Use alloc_percpu rather than __alloc_percpu
xen/gntdev: Use VM_MIXEDMAP instead of VM_IO to avoid NUMA balancing
tpm xen: Remove bogus tpm_chip_unregister
kernel/debug/debug_core.c: more properly delay for secondary CPUs
kernel/watchdog: use nmi registers snapshot in hardlockup handler
CIFS: Fix a possible memory corruption in push locks
CIFS: Fix missing nls unload in smb2_reconnect()
CIFS: Fix a possible memory corruption during reconnect
ASoC: intel: Fix crash at suspend/resume without card registration
dm space map metadata: fix 'struct sm_metadata' leak on failed create
dm crypt: mark key as invalid until properly loaded
dm flakey: return -EINVAL on interval bounds error in flakey_ctr()
blk-mq: Do not invoke .queue_rq() for a stopped queue
usb: gadget: composite: always set ep->mult to a sensible value
exec: Ensure mm->user_ns contains the execed files
fs: exec: apply CLOEXEC before changing dumpable task flags
mm/vmscan.c: set correct defer count for shrinker
loop: return proper error from loop_queue_rq()
f2fs: set ->owner for debugfs status file's file_operations
ext4: do not perform data journaling when data is encrypted
ext4: return -ENOMEM instead of success
ext4: reject inodes with negative size
ext4: add sanity checking to count_overhead()
ext4: fix in-superblock mount options processing
ext4: use more strict checks for inodes_per_block on mount
ext4: fix stack memory corruption with 64k block size
ext4: fix mballoc breakage with 64k block size
crypto: caam - fix AEAD givenc descriptors
ptrace: Capture the ptracer's creds not PT_PTRACE_CAP
mm: Add a user_ns owner to mm_struct and fix ptrace permission checks
block_dev: don't test bdev->bd_contains when it is not stable
btrfs: make file clone aware of fatal signals
Btrfs: don't BUG() during drop snapshot
Btrfs: fix memory leak in do_walk_down
Btrfs: don't leak reloc root nodes on error
Btrfs: return gracefully from balance if fs tree is corrupted
Btrfs: bail out if block group has different mixed flag
Btrfs: fix memory leak in reading btree blocks
clk: ti: omap36xx: Work around sprz319 advisory 2.1
ALSA: hda: when comparing pin configurations, ignore assoc in addition to seq
ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiO
ALSA: hda - fix headset-mic problem on a Dell laptop
ALSA: hda - ignore the assoc and seq when comparing pin configurations
ALSA: hda/ca0132 - Add quirk for Alienware 15 R2 2016
ALSA: hiface: Fix M2Tech hiFace driver sampling rate change
ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks
USB: UHCI: report non-PME wakeup signalling for Intel hardware
usb: gadget: composite: correctly initialize ep->maxpacket
usb: gadget: f_uac2: fix error handling at afunc_bind
usb: hub: Fix auto-remount of safely removed or ejected USB-3 devices
USB: cdc-acm: add device id for GW Instek AFG-125
USB: serial: kl5kusb105: fix open error path
USB: serial: option: add dlink dwm-158
USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041
Btrfs: fix qgroup rescan worker initialization
btrfs: store and load values of stripes_min/stripes_max in balance status item
Btrfs: fix tree search logic when replaying directory entry deletes
btrfs: limit async_work allocation and worker func duration
ANDROID: trace: net: use %pK for kernel pointers
ANDROID: android-base: Enable QUOTA related configs
net: ipv4: Don't crash if passing a null sk to ip_rt_update_pmtu.
net: inet: Support UID-based routing in IP protocols.
Revert "net: ipv6: fix virtual tunneling build"
net: core: add UID to flows, rules, and routes
net: core: Add a UID field to struct sock.
Revert "net: core: Support UID-based routing."
Revert "net: core: Handle 'sk' being NULL in UID-based routing"
Revert "ANDROID: net: fix 'const' warnings"
Revert "ANDROID: net: fib: remove duplicate assignment"
Revert "ANDROID: net: core: fix UID-based routing"
UPSTREAM: efi/arm64: Don't apply MEMBLOCK_NOMAP to UEFI memory map mapping
UPSTREAM: arm64: enable CONFIG_DEBUG_RODATA by default
goldfish: enable CONFIG_INET_DIAG_DESTROY
sched/walt: kill {min,max}_capacity
sched: fix wrong truncation of walt_avg
ANDROID: dm verity: add minimum prefetch size
Linux 4.4.39
crypto: rsa - Add Makefile dependencies to fix parallel builds
hotplug: Make register and unregister notifier API symmetric
batman-adv: Check for alloc errors when preparing TT local data
m68k: Fix ndelay() macro
arm64: futex.h: Add missing PAN toggling
can: peak: fix bad memory access and free sequence
can: raw: raw_setsockopt: limit number of can_filter that can be set
crypto: mcryptd - Check mcryptd algorithm compatibility
perf/x86: Fix full width counter, counter overflow
locking/rtmutex: Use READ_ONCE() in rt_mutex_owner()
locking/rtmutex: Prevent dequeue vs. unlock race
zram: restrict add/remove attributes to root only
parisc: Fix TLB related boot crash on SMP machines
parisc: Remove unnecessary TLB purges from flush_dcache_page_asm and flush_icache_page_asm
parisc: Purge TLB before setting PTE
powerpc/eeh: Fix deadlock when PE frozen state can't be cleared
Conflicts:
arch/arm64/kernel/traps.c
drivers/usb/dwc3/core.h
drivers/usb/dwc3/ep0.c
drivers/usb/gadget/function/f_fs.c
drivers/usb/host/xhci-mem.c
drivers/usb/host/xhci-ring.c
drivers/usb/host/xhci.c
drivers/video/fbdev/core/fbcmap.c
include/trace/events/sched.h
mm/vmscan.c
Change-Id: I3faa0010ecb98972cd8e6470377a493b56d95f89
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Diffstat (limited to 'drivers/usb')
48 files changed, 672 insertions, 352 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 4d77745f439f..96849e2e7435 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1708,6 +1708,7 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */ .driver_info = QUIRK_CONTROL_LINE_STATE, }, { USB_DEVICE(0x2184, 0x001c) }, /* GW Instek AFG-2225 */ + { USB_DEVICE(0x2184, 0x0036) }, /* GW Instek AFG-125 */ { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ }, /* Motorola H24 HSPA module: */ diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index ff44cfa26af8..ac30a051ad71 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -205,6 +205,16 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, if (ifp->desc.bNumEndpoints >= num_ep) goto skip_to_next_endpoint_or_interface_descriptor; + /* Check for duplicate endpoint addresses */ + for (i = 0; i < ifp->desc.bNumEndpoints; ++i) { + if (ifp->endpoint[i].desc.bEndpointAddress == + d->bEndpointAddress) { + dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n", + cfgno, inum, asnum, d->bEndpointAddress); + goto skip_to_next_endpoint_or_interface_descriptor; + } + } + endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints]; ++ifp->desc.bNumEndpoints; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 29242ffe8dca..f84ef04284f5 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -106,6 +106,7 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem); static void hub_release(struct kref *kref); static int usb_reset_and_verify_device(struct usb_device *udev); +static int hub_port_disable(struct usb_hub *hub, int port1, int set_state); static inline char *portspeed(struct usb_hub *hub, int portstatus) { @@ -894,88 +895,6 @@ static int hub_set_port_link_state(struct usb_hub *hub, int port1, } /* - * If USB 3.0 ports are placed into the Disabled state, they will no longer - * detect any device connects or disconnects. This is generally not what the - * USB core wants, since it expects a disabled port to produce a port status - * change event when a new device connects. - * - * Instead, set the link state to Disabled, wait for the link to settle into - * that state, clear any change bits, and then put the port into the RxDetect - * state. - */ -static int hub_usb3_port_disable(struct usb_hub *hub, int port1) -{ - int ret; - int total_time; - u16 portchange, portstatus; - - if (!hub_is_superspeed(hub->hdev)) - return -EINVAL; - - ret = hub_port_status(hub, port1, &portstatus, &portchange); - if (ret < 0) - return ret; - - /* - * USB controller Advanced Micro Devices, Inc. [AMD] FCH USB XHCI - * Controller [1022:7814] will have spurious result making the following - * usb 3.0 device hotplugging route to the 2.0 root hub and recognized - * as high-speed device if we set the usb 3.0 port link state to - * Disabled. Since it's already in USB_SS_PORT_LS_RX_DETECT state, we - * check the state here to avoid the bug. - */ - if ((portstatus & USB_PORT_STAT_LINK_STATE) == - USB_SS_PORT_LS_RX_DETECT) { - dev_dbg(&hub->ports[port1 - 1]->dev, - "Not disabling port; link state is RxDetect\n"); - return ret; - } - - ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED); - if (ret) - return ret; - - /* Wait for the link to enter the disabled state. */ - for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) { - ret = hub_port_status(hub, port1, &portstatus, &portchange); - if (ret < 0) - return ret; - - if ((portstatus & USB_PORT_STAT_LINK_STATE) == - USB_SS_PORT_LS_SS_DISABLED) - break; - if (total_time >= HUB_DEBOUNCE_TIMEOUT) - break; - msleep(HUB_DEBOUNCE_STEP); - } - if (total_time >= HUB_DEBOUNCE_TIMEOUT) - dev_warn(&hub->ports[port1 - 1]->dev, - "Could not disable after %d ms\n", total_time); - - return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT); -} - -static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) -{ - struct usb_port *port_dev = hub->ports[port1 - 1]; - struct usb_device *hdev = hub->hdev; - int ret = 0; - - if (port_dev->child && set_state) - usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED); - if (!hub->error) { - if (hub_is_superspeed(hub->hdev)) - ret = hub_usb3_port_disable(hub, port1); - else - ret = usb_clear_port_feature(hdev, port1, - USB_PORT_FEAT_ENABLE); - } - if (ret && ret != -ENODEV) - dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret); - return ret; -} - -/* * Disable a port and mark a logical connect-change event, so that some * time later hub_wq will disconnect() any existing usb_device on the port * and will re-enumerate if there actually is a device attached. @@ -4086,6 +4005,26 @@ void usb_unlocked_enable_lpm(struct usb_device *udev) } EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm); +/* usb3 devices use U3 for disabled, make sure remote wakeup is disabled */ +static void hub_usb3_port_prepare_disable(struct usb_hub *hub, + struct usb_port *port_dev) +{ + struct usb_device *udev = port_dev->child; + int ret; + + if (udev && udev->port_is_suspended && udev->do_remote_wakeup) { + ret = hub_set_port_link_state(hub, port_dev->portnum, + USB_SS_PORT_LS_U0); + if (!ret) { + msleep(USB_RESUME_TIMEOUT); + ret = usb_disable_remote_wakeup(udev); + } + if (ret) + dev_warn(&udev->dev, + "Port disable: can't disable remote wake\n"); + udev->do_remote_wakeup = 0; + } +} #else /* CONFIG_PM */ @@ -4093,6 +4032,9 @@ EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm); #define hub_resume NULL #define hub_reset_resume NULL +static inline void hub_usb3_port_prepare_disable(struct usb_hub *hub, + struct usb_port *port_dev) { } + int usb_disable_lpm(struct usb_device *udev) { return 0; @@ -4128,6 +4070,34 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, #endif /* CONFIG_PM */ +/* + * USB-3 does not have a similar link state as USB-2 that will avoid negotiating + * a connection with a plugged-in cable but will signal the host when the cable + * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices + */ +static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) +{ + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_device *hdev = hub->hdev; + int ret = 0; + + if (!hub->error) { + if (hub_is_superspeed(hub->hdev)) { + hub_usb3_port_prepare_disable(hub, port_dev); + ret = hub_set_port_link_state(hub, port_dev->portnum, + USB_SS_PORT_LS_U3); + } else { + ret = usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_ENABLE); + } + } + if (port_dev->child && set_state) + usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED); + if (ret && ret != -ENODEV) + dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret); + return ret; +} + /* USB 2.0 spec, 7.1.7.3 / fig 7-29: * diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index d2e50a27140c..24f9f98968a5 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -37,6 +37,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* CBM - Flash disk */ { USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME }, + /* WORLDE easy key (easykey.25) MIDI controller */ + { USB_DEVICE(0x0218, 0x0401), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* HP 5300/5370C scanner */ { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 }, diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 9de5e06430e1..f6e2bea7b9aa 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -44,7 +44,7 @@ #define DWC3_XHCI_RESOURCES_NUM 2 #define DWC3_SCRATCHBUF_SIZE 4096 /* each buffer is assumed to be 4KiB */ -#define DWC3_EVENT_BUFFERS_SIZE (2 * PAGE_SIZE) +#define DWC3_EVENT_BUFFERS_SIZE 4096 #define DWC3_EVENT_TYPE_MASK 0xfe #define DWC3_EVENT_TYPE_DEV 0 diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 3d731d1b5c60..d2c0c1a8d979 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -37,6 +37,7 @@ #define PCI_DEVICE_ID_INTEL_BXT 0x0aaa #define PCI_DEVICE_ID_INTEL_APL 0x5aaa #define PCI_DEVICE_ID_INTEL_KBP 0xa2b0 +#define PCI_DEVICE_ID_INTEL_GLK 0x31aa static const struct acpi_gpio_params reset_gpios = { 0, 0, false }; static const struct acpi_gpio_params cs_gpios = { 1, 0, false }; @@ -216,6 +217,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, { } /* Terminating Entry */ }; diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 9cd87513619c..c2a6fdbfcfee 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -62,20 +62,13 @@ static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state) } } -static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma, - u32 len, u32 type, bool chain) +static void dwc3_ep0_prepare_one_trb(struct dwc3 *dwc, u8 epnum, + dma_addr_t buf_dma, u32 len, u32 type, bool chain) { - struct dwc3_gadget_ep_cmd_params params; struct dwc3_trb *trb; struct dwc3_ep *dep; - int ret; - dep = dwc->eps[epnum]; - if (dep->flags & DWC3_EP_BUSY) { - dwc3_trace(trace_dwc3_ep0, "%s still busy", dep->name); - return 0; - } trb = &dwc->ep0_trb[dep->free_slot]; @@ -96,15 +89,25 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma, trb->ctrl |= (DWC3_TRB_CTRL_IOC | DWC3_TRB_CTRL_LST); - if (chain) + trace_dwc3_prepare_trb(dep, trb); +} + +static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3_ep *dep; + int ret; + + dep = dwc->eps[epnum]; + if (dep->flags & DWC3_EP_BUSY) { + dwc3_trace(trace_dwc3_ep0, "%s still busy", dep->name); return 0; + } memset(¶ms, 0, sizeof(params)); params.param0 = upper_32_bits(dwc->ep0_trb_addr); params.param1 = lower_32_bits(dwc->ep0_trb_addr); - trace_dwc3_prepare_trb(dep, trb); - ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, DWC3_DEPCMD_STARTTRANSFER, ¶ms); if (ret < 0) { @@ -333,9 +336,9 @@ void dwc3_ep0_out_start(struct dwc3 *dwc) { int ret; - ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8, + dwc3_ep0_prepare_one_trb(dwc, 0, dwc->ctrl_req_addr, 8, DWC3_TRBCTL_CONTROL_SETUP, false); - + ret = dwc3_ep0_start_trans(dwc, 0); if (WARN_ON_ONCE(ret < 0)) dbg_event(dwc->eps[0]->number, "EOUTSTART", ret); } @@ -923,9 +926,9 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, dwc->ep0_next_event = DWC3_EP0_COMPLETE; - ret = dwc3_ep0_start_trans(dwc, epnum, - dwc->ctrl_req_addr, 0, - DWC3_TRBCTL_CONTROL_DATA, false); + dwc3_ep0_prepare_one_trb(dwc, epnum, dwc->ctrl_req_addr, + 0, DWC3_TRBCTL_CONTROL_DATA, false); + ret = dwc3_ep0_start_trans(dwc, epnum); if (WARN_ON_ONCE(ret < 0)) dbg_event(epnum, "ECTRL_DATA", ret); } @@ -1010,9 +1013,10 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, req->direction = !!dep->number; if (req->request.length == 0) { - ret = dwc3_ep0_start_trans(dwc, dep->number, + dwc3_ep0_prepare_one_trb(dwc, dep->number, dwc->ctrl_req_addr, 0, DWC3_TRBCTL_CONTROL_DATA, false); + ret = dwc3_ep0_start_trans(dwc, dep->number); } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) && (dep->number == 0)) { u32 transfer_size = 0; @@ -1030,7 +1034,7 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, if (req->request.length > DWC3_EP0_BOUNCE_SIZE) { transfer_size = ALIGN(req->request.length - maxpacket, maxpacket); - ret = dwc3_ep0_start_trans(dwc, dep->number, + dwc3_ep0_prepare_one_trb(dwc, dep->number, req->request.dma, transfer_size, DWC3_TRBCTL_CONTROL_DATA, @@ -1042,9 +1046,10 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, dwc->ep0_bounced = true; - ret = dwc3_ep0_start_trans(dwc, dep->number, + dwc3_ep0_prepare_one_trb(dwc, dep->number, dwc->ep0_bounce_addr, transfer_size, DWC3_TRBCTL_CONTROL_DATA, false); + ret = dwc3_ep0_start_trans(dwc, dep->number); } else { ret = usb_gadget_map_request(&dwc->gadget, &req->request, dep->number); @@ -1053,9 +1058,10 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, return; } - ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma, + dwc3_ep0_prepare_one_trb(dwc, dep->number, req->request.dma, req->request.length, DWC3_TRBCTL_CONTROL_DATA, false); + ret = dwc3_ep0_start_trans(dwc, dep->number); } dbg_queue(dep->number, &req->request, ret); @@ -1069,8 +1075,9 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep) type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3 : DWC3_TRBCTL_CONTROL_STATUS2; - return dwc3_ep0_start_trans(dwc, dep->number, + dwc3_ep0_prepare_one_trb(dwc, dep->number, dwc->ctrl_req_addr, 0, type, false); + return dwc3_ep0_start_trans(dwc, dep->number); } static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 7a279db521ca..8fd0e2cfa148 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -285,11 +285,11 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, if (req->request.status == -EINPROGRESS) req->request.status = status; - if (dwc->ep0_bounced && dep->number == 0) + if (dwc->ep0_bounced && dep->number <= 1) dwc->ep0_bounced = false; - else - usb_gadget_unmap_request(&dwc->gadget, &req->request, - req->direction); + + usb_gadget_unmap_request(&dwc->gadget, &req->request, + req->direction); dev_dbg(dwc->dev, "request %pK from %s completed %d/%d ===> %d\n", req, dep->name, req->request.actual, diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 9d795489c285..a844ea4d06db 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -160,11 +160,16 @@ int config_ep_by_speed(struct usb_gadget *g, ep_found: /* commit results */ - _ep->maxpacket = usb_endpoint_maxp(chosen_desc); + _ep->maxpacket = usb_endpoint_maxp(chosen_desc) & 0x7ff; _ep->desc = chosen_desc; _ep->comp_desc = NULL; _ep->maxburst = 0; - _ep->mult = 0; + _ep->mult = 1; + + if (g->speed == USB_SPEED_HIGH && (usb_endpoint_xfer_isoc(_ep->desc) || + usb_endpoint_xfer_int(_ep->desc))) + _ep->mult = ((usb_endpoint_maxp(_ep->desc) & 0x1800) >> 11) + 1; + if (!want_comp_desc) return 0; @@ -181,7 +186,7 @@ ep_found: switch (usb_endpoint_type(_ep->desc)) { case USB_ENDPOINT_XFER_ISOC: /* mult: bits 1:0 of bmAttributes */ - _ep->mult = comp_desc->bmAttributes & 0x3; + _ep->mult = (comp_desc->bmAttributes & 0x3) + 1; case USB_ENDPOINT_XFER_BULK: case USB_ENDPOINT_XFER_INT: _ep->maxburst = comp_desc->bMaxBurst + 1; @@ -1750,9 +1755,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) value = min(w_length, (u16) 1); break; - /* function drivers must handle get/set altsetting; if there's - * no get() method, we know only altsetting zero works. - */ + /* function drivers must handle get/set altsetting */ case USB_REQ_SET_INTERFACE: if (ctrl->bRequestType != USB_RECIP_INTERFACE) goto unknown; @@ -1761,7 +1764,13 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) f = cdev->config->interface[intf]; if (!f) break; - if (w_value && !f->set_alt) + + /* + * If there's no get_alt() method, we know only altsetting zero + * works. There is no need to check if set_alt() is not NULL + * as we check this in usb_add_function(). + */ + if (w_value && !f->get_alt) break; value = f->set_alt(f, w_index, w_value); if (value == USB_GADGET_DELAYED_STATUS) { diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 31d3022b6ce7..a1c00525a598 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -2437,6 +2437,8 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type, if (len < sizeof(*d) || h->interface >= ffs->interfaces_count) return -EINVAL; length = le32_to_cpu(d->dwSize); + if (len < length) + return -EINVAL; type = le32_to_cpu(d->dwPropertyDataType); if (type < USB_EXT_PROP_UNICODE || type > USB_EXT_PROP_UNICODE_MULTI) { @@ -2445,6 +2447,11 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type, return -EINVAL; } pnl = le16_to_cpu(d->wPropertyNameLength); + if (length < 14 + pnl) { + pr_vdebug("invalid os descriptor length: %d pnl:%d (descriptor %d)\n", + length, pnl, type); + return -EINVAL; + } pdl = le32_to_cpu(*(u32 *)((u8 *)data + 10 + pnl)); if (length != 14 + pnl + pdl) { pr_vdebug("invalid os descriptor length: %d pnl:%d pdl:%d (descriptor %d)\n", @@ -2534,6 +2541,9 @@ static int __ffs_data_got_descs(struct ffs_data *ffs, } } if (flags & (1 << i)) { + if (len < 4) { + goto error; + } os_descs_count = get_unaligned_le32(data); data += 4; len -= 4; @@ -2611,7 +2621,8 @@ static int __ffs_data_got_strings(struct ffs_data *ffs, ffs_log("enter: len %zu", len); - if (unlikely(get_unaligned_le32(data) != FUNCTIONFS_STRINGS_MAGIC || + if (unlikely(len < 16 || + get_unaligned_le32(data) != FUNCTIONFS_STRINGS_MAGIC || get_unaligned_le32(data + 4) != len)) goto error; str_count = get_unaligned_le32(data + 8); diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index 12628dd36e55..12064d3bddf6 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -1079,13 +1079,13 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc); if (!agdev->out_ep) { dev_err(dev, "%s:%d Error!\n", __func__, __LINE__); - goto err; + return ret; } agdev->in_ep = usb_ep_autoconfig(gadget, &fs_epin_desc); if (!agdev->in_ep) { dev_err(dev, "%s:%d Error!\n", __func__, __LINE__); - goto err; + return ret; } uac2->p_prm.uac2 = uac2; @@ -1102,7 +1102,7 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) ret = usb_assign_descriptors(fn, fs_audio_desc, hs_audio_desc, NULL); if (ret) - goto err; + return ret; prm = &agdev->uac2.c_prm; prm->max_psize = hs_epout_desc.wMaxPacketSize; @@ -1117,19 +1117,19 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) prm->rbuf = kzalloc(prm->max_psize * USB_XFERS, GFP_KERNEL); if (!prm->rbuf) { prm->max_psize = 0; - goto err_free_descs; + goto err; } ret = alsa_uac2_init(agdev); if (ret) - goto err_free_descs; + goto err; return 0; -err_free_descs: - usb_free_all_descriptors(fn); err: kfree(agdev->uac2.p_prm.rbuf); kfree(agdev->uac2.c_prm.rbuf); +err_free_descs: + usb_free_all_descriptors(fn); return -EINVAL; } diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c index 3d0d5d94a62f..0f01c04d7cbd 100644 --- a/drivers/usb/gadget/function/uvc_video.c +++ b/drivers/usb/gadget/function/uvc_video.c @@ -243,7 +243,7 @@ uvc_video_alloc_requests(struct uvc_video *video) req_size = video->ep->maxpacket * max_t(unsigned int, video->ep->maxburst, 1) - * (video->ep->mult + 1); + * (video->ep->mult); for (i = 0; i < UVC_NUM_REQUESTS; ++i) { video->req_buffer[i] = kmalloc(req_size, GFP_KERNEL); diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index e57f48f9528f..de014436fb22 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -1125,7 +1125,7 @@ ep0_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) /* data and/or status stage for control request */ } else if (dev->state == STATE_DEV_SETUP) { - /* IN DATA+STATUS caller makes len <= wLength */ + len = min_t(size_t, len, dev->setup_wLength); if (dev->setup_in) { retval = setup_req (dev->gadget->ep0, dev->req, len); if (retval == 0) { @@ -1755,10 +1755,12 @@ static struct usb_gadget_driver probe_driver = { * such as configuration notifications. */ -static int is_valid_config (struct usb_config_descriptor *config) +static int is_valid_config(struct usb_config_descriptor *config, + unsigned int total) { return config->bDescriptorType == USB_DT_CONFIG && config->bLength == USB_DT_CONFIG_SIZE + && total >= USB_DT_CONFIG_SIZE && config->bConfigurationValue != 0 && (config->bmAttributes & USB_CONFIG_ATT_ONE) != 0 && (config->bmAttributes & USB_CONFIG_ATT_WAKEUP) == 0; @@ -1783,7 +1785,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) } spin_unlock_irq(&dev->lock); - if (len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) + if ((len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) || + (len > PAGE_SIZE * 4)) return -EINVAL; /* we might need to change message format someday */ @@ -1807,7 +1810,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) /* full or low speed config */ dev->config = (void *) kbuf; total = le16_to_cpu(dev->config->wTotalLength); - if (!is_valid_config (dev->config) || total >= length) + if (!is_valid_config(dev->config, total) || + total > length - USB_DT_DEVICE_SIZE) goto fail; kbuf += total; length -= total; @@ -1816,10 +1820,13 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) if (kbuf [1] == USB_DT_CONFIG) { dev->hs_config = (void *) kbuf; total = le16_to_cpu(dev->hs_config->wTotalLength); - if (!is_valid_config (dev->hs_config) || total >= length) + if (!is_valid_config(dev->hs_config, total) || + total > length - USB_DT_DEVICE_SIZE) goto fail; kbuf += total; length -= total; + } else { + dev->hs_config = NULL; } /* could support multiple configs, using another encoding! */ diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index dde44450dfa9..22d067cd5aa3 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -330,7 +330,7 @@ static void nuke(struct dummy *dum, struct dummy_ep *ep) /* caller must hold lock */ static void stop_activity(struct dummy *dum) { - struct dummy_ep *ep; + int i; /* prevent any more requests */ dum->address = 0; @@ -338,8 +338,8 @@ static void stop_activity(struct dummy *dum) /* The timer is left running so that outstanding URBs can fail */ /* nuke any pending requests first, so driver i/o is quiesced */ - list_for_each_entry(ep, &dum->gadget.ep_list, ep.ep_list) - nuke(dum, ep); + for (i = 0; i < DUMMY_ENDPOINTS; ++i) + nuke(dum, &dum->ep[i]); /* driver now does any non-usb quiescing necessary */ } diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c index 940304c33224..02260cfdedb1 100644 --- a/drivers/usb/host/uhci-pci.c +++ b/drivers/usb/host/uhci-pci.c @@ -129,6 +129,10 @@ static int uhci_pci_init(struct usb_hcd *hcd) if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_HP) uhci->wait_for_hp = 1; + /* Intel controllers use non-PME wakeup signalling */ + if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_INTEL) + device_set_run_wake(uhci_dev(uhci), 1); + /* Set up pointers to PCI-specific functions */ uhci->reset_hc = uhci_pci_reset_hc; uhci->check_and_reset_hc = uhci_pci_check_and_reset_hc; diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 163de4bde2d8..d885033d3322 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1529,6 +1529,35 @@ int xhci_bus_suspend(struct usb_hcd *hcd) return 0; } +/* + * Workaround for missing Cold Attach Status (CAS) if device re-plugged in S3. + * warm reset a USB3 device stuck in polling or compliance mode after resume. + * See Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 + */ +static bool xhci_port_missing_cas_quirk(int port_index, + __le32 __iomem **port_array) +{ + u32 portsc; + + portsc = readl(port_array[port_index]); + + /* if any of these are set we are not stuck */ + if (portsc & (PORT_CONNECT | PORT_CAS)) + return false; + + if (((portsc & PORT_PLS_MASK) != XDEV_POLLING) && + ((portsc & PORT_PLS_MASK) != XDEV_COMP_MODE)) + return false; + + /* clear wakeup/change bits, and do a warm port reset */ + portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); + portsc |= PORT_WR; + writel(portsc, port_array[port_index]); + /* flush write */ + readl(port_array[port_index]); + return true; +} + int xhci_bus_resume(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); @@ -1566,6 +1595,14 @@ int xhci_bus_resume(struct usb_hcd *hcd) u32 temp; temp = readl(port_array[port_index]); + + /* warm reset CAS limited ports stuck in polling/compliance */ + if ((xhci->quirks & XHCI_MISSING_CAS) && + (hcd->speed >= HCD_USB3) && + xhci_port_missing_cas_quirk(port_index, port_array)) { + xhci_dbg(xhci, "reset stuck port %d\n", port_index); + continue; + } if (DEV_SUPERSPEED_ANY(temp)) temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); else diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 8e5ab373dce9..82483599a882 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -964,6 +964,40 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) xhci->devs[slot_id] = NULL; } +/* + * Free a virt_device structure. + * If the virt_device added a tt_info (a hub) and has children pointing to + * that tt_info, then free the child first. Recursive. + * We can't rely on udev at this point to find child-parent relationships. + */ +void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_id) +{ + struct xhci_virt_device *vdev; + struct list_head *tt_list_head; + struct xhci_tt_bw_info *tt_info, *next; + int i; + + vdev = xhci->devs[slot_id]; + if (!vdev) + return; + + tt_list_head = &(xhci->rh_bw[vdev->real_port - 1].tts); + list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) { + /* is this a hub device that added a tt_info to the tts list */ + if (tt_info->slot_id == slot_id) { + /* are any devices using this tt_info? */ + for (i = 1; i < HCS_MAX_SLOTS(xhci->hcs_params1); i++) { + vdev = xhci->devs[i]; + if (vdev && (vdev->tt_info == tt_info)) + xhci_free_virt_devices_depth_first( + xhci, i); + } + } + } + /* we are now at a leaf device */ + xhci_free_virt_device(xhci, slot_id); +} + int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags) { @@ -1933,7 +1967,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) struct device *dev = xhci_to_hcd(xhci)->self.controller; int i, j, num_ports; - del_timer_sync(&xhci->cmd_timer); + cancel_delayed_work_sync(&xhci->cmd_timer); xhci_event_ring_cleanup(xhci); @@ -1956,8 +1990,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } } - for (i = 1; i < MAX_HC_SLOTS; ++i) - xhci_free_virt_device(xhci, i); + for (i = HCS_MAX_SLOTS(xhci->hcs_params1); i > 0; i--) + xhci_free_virt_devices_depth_first(xhci, i); dma_pool_destroy(xhci->segment_pool); xhci->segment_pool = NULL; @@ -2636,9 +2670,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) INIT_LIST_HEAD(&xhci->cmd_list); - /* init command timeout timer */ - setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout, - (unsigned long)xhci); + /* init command timeout work */ + INIT_DELAYED_WORK(&xhci->cmd_timer, xhci_handle_command_timeout); + init_completion(&xhci->cmd_ring_stop_completion); page_size = readl(&xhci->op_regs->page_size); xhci_dbg_trace(xhci, trace_xhci_dbg_init, @@ -2677,7 +2711,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) * "physically contiguous and 64-byte (cache line) aligned". */ xhci->dcbaa = dma_alloc_coherent(dev, sizeof(*xhci->dcbaa), &dma, - GFP_KERNEL); + flags); if (!xhci->dcbaa) goto fail; memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa)); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index cf147ccac7d3..dd262f418140 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -51,6 +51,7 @@ #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f #define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8 #define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8 +#define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8 static const char hcd_name[] = "xhci_hcd"; @@ -165,9 +166,15 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI)) { + pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) { xhci->quirks |= XHCI_PME_STUCK_QUIRK; } + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) + xhci->quirks |= XHCI_MISSING_CAS; + if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_EJ168) { xhci->quirks |= XHCI_RESET_ON_RESUME; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 98d01acc8b11..12e38cf022ff 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -280,23 +280,76 @@ void xhci_ring_cmd_db(struct xhci_hcd *xhci) readl(&xhci->dba->doorbell[0]); } -static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) +static bool xhci_mod_cmd_timer(struct xhci_hcd *xhci, unsigned long delay) +{ + return mod_delayed_work(system_wq, &xhci->cmd_timer, delay); +} + +static struct xhci_command *xhci_next_queued_cmd(struct xhci_hcd *xhci) +{ + return list_first_entry_or_null(&xhci->cmd_list, struct xhci_command, + cmd_list); +} + +/* + * Turn all commands on command ring with status set to "aborted" to no-op trbs. + * If there are other commands waiting then restart the ring and kick the timer. + * This must be called with command ring stopped and xhci->lock held. + */ +static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci, + struct xhci_command *cur_cmd) +{ + struct xhci_command *i_cmd; + u32 cycle_state; + + /* Turn all aborted commands in list to no-ops, then restart */ + list_for_each_entry(i_cmd, &xhci->cmd_list, cmd_list) { + + if (i_cmd->status != COMP_CMD_ABORT) + continue; + + i_cmd->status = COMP_CMD_STOP; + + xhci_dbg(xhci, "Turn aborted command %pK to no-op\n", + i_cmd->command_trb); + /* get cycle state from the original cmd trb */ + cycle_state = le32_to_cpu( + i_cmd->command_trb->generic.field[3]) & TRB_CYCLE; + /* modify the command trb to no-op command */ + i_cmd->command_trb->generic.field[0] = 0; + i_cmd->command_trb->generic.field[1] = 0; + i_cmd->command_trb->generic.field[2] = 0; + i_cmd->command_trb->generic.field[3] = cpu_to_le32( + TRB_TYPE(TRB_CMD_NOOP) | cycle_state); + + /* + * caller waiting for completion is called when command + * completion event is received for these no-op commands + */ + } + + xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; + + /* ring command ring doorbell to restart the command ring */ + if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) && + !(xhci->xhc_state & XHCI_STATE_DYING)) { + xhci->current_cmd = cur_cmd; + xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT); + xhci_ring_cmd_db(xhci); + } +} + +/* Must be called with xhci->lock held, releases and aquires lock back */ +static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags) { u64 temp_64; int ret; xhci_dbg(xhci, "Abort command ring\n"); - temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); - xhci->cmd_ring_state = CMD_RING_STATE_ABORTED; + reinit_completion(&xhci->cmd_ring_stop_completion); - /* - * Writing the CMD_RING_ABORT bit should cause a cmd completion event, - * however on some host hw the CMD_RING_RUNNING bit is correctly cleared - * but the completion event in never sent. Use the cmd timeout timer to - * handle those cases. Use twice the time to cover the bit polling retry - */ - mod_timer(&xhci->cmd_timer, jiffies + (2 * XHCI_CMD_DEFAULT_TIMEOUT)); + temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); xhci_write_64(xhci, temp_64 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring); @@ -316,16 +369,30 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) udelay(1000); ret = xhci_handshake(&xhci->op_regs->cmd_ring, CMD_RING_RUNNING, 0, 3 * 1000 * 1000); - if (ret == 0) - return 0; - - xhci_err(xhci, "Stopped the command ring failed, " - "maybe the host is dead\n"); - del_timer(&xhci->cmd_timer); - xhci->xhc_state |= XHCI_STATE_DYING; - xhci_quiesce(xhci); - xhci_halt(xhci); - return -ESHUTDOWN; + if (ret < 0) { + xhci_err(xhci, "Stopped the command ring failed, " + "maybe the host is dead\n"); + xhci->xhc_state |= XHCI_STATE_DYING; + xhci_quiesce(xhci); + xhci_halt(xhci); + return -ESHUTDOWN; + } + } + /* + * Writing the CMD_RING_ABORT bit should cause a cmd completion event, + * however on some host hw the CMD_RING_RUNNING bit is correctly cleared + * but the completion event in never sent. Wait 2 secs (arbitrary + * number) to handle those cases after negation of CMD_RING_RUNNING. + */ + spin_unlock_irqrestore(&xhci->lock, flags); + ret = wait_for_completion_timeout(&xhci->cmd_ring_stop_completion, + msecs_to_jiffies(2000)); + spin_lock_irqsave(&xhci->lock, flags); + if (!ret) { + xhci_dbg(xhci, "No stop event for abort, ring start fail?\n"); + xhci_cleanup_command_queue(xhci); + } else { + xhci_handle_stopped_cmd_ring(xhci, xhci_next_queued_cmd(xhci)); } return 0; @@ -846,17 +913,6 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) spin_lock_irqsave(&xhci->lock, flags); ep->stop_cmds_pending--; - if (xhci->xhc_state & XHCI_STATE_REMOVING) { - spin_unlock_irqrestore(&xhci->lock, flags); - return; - } - if (xhci->xhc_state & XHCI_STATE_DYING) { - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Stop EP timer ran, but another timer marked " - "xHCI as DYING, exiting."); - spin_unlock_irqrestore(&xhci->lock, flags); - return; - } if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) { xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Stop EP timer ran, but no command pending, " @@ -1208,101 +1264,62 @@ void xhci_cleanup_command_queue(struct xhci_hcd *xhci) xhci_complete_del_and_free_cmd(cur_cmd, COMP_CMD_ABORT); } -/* - * Turn all commands on command ring with status set to "aborted" to no-op trbs. - * If there are other commands waiting then restart the ring and kick the timer. - * This must be called with command ring stopped and xhci->lock held. - */ -static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci, - struct xhci_command *cur_cmd) -{ - struct xhci_command *i_cmd, *tmp_cmd; - u32 cycle_state; - - /* Turn all aborted commands in list to no-ops, then restart */ - list_for_each_entry_safe(i_cmd, tmp_cmd, &xhci->cmd_list, - cmd_list) { - - if (i_cmd->status != COMP_CMD_ABORT) - continue; - - i_cmd->status = COMP_CMD_STOP; - - xhci_dbg(xhci, "Turn aborted command %pK to no-op\n", - i_cmd->command_trb); - /* get cycle state from the original cmd trb */ - cycle_state = le32_to_cpu( - i_cmd->command_trb->generic.field[3]) & TRB_CYCLE; - /* modify the command trb to no-op command */ - i_cmd->command_trb->generic.field[0] = 0; - i_cmd->command_trb->generic.field[1] = 0; - i_cmd->command_trb->generic.field[2] = 0; - i_cmd->command_trb->generic.field[3] = cpu_to_le32( - TRB_TYPE(TRB_CMD_NOOP) | cycle_state); - - /* - * caller waiting for completion is called when command - * completion event is received for these no-op commands - */ - } - - xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; - - /* ring command ring doorbell to restart the command ring */ - if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) && - !(xhci->xhc_state & XHCI_STATE_DYING)) { - xhci->current_cmd = cur_cmd; - mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT); - xhci_ring_cmd_db(xhci); - } - return; -} - - -void xhci_handle_command_timeout(unsigned long data) +void xhci_handle_command_timeout(struct work_struct *work) { struct xhci_hcd *xhci; int ret; unsigned long flags; u64 hw_ring_state; - bool second_timeout = false; - xhci = (struct xhci_hcd *) data; - /* mark this command to be cancelled */ + xhci = container_of(to_delayed_work(work), struct xhci_hcd, cmd_timer); + spin_lock_irqsave(&xhci->lock, flags); - if (xhci->current_cmd) { - if (xhci->current_cmd->status == COMP_CMD_ABORT) - second_timeout = true; - xhci->current_cmd->status = COMP_CMD_ABORT; + + /* + * If timeout work is pending, or current_cmd is NULL, it means we + * raced with command completion. Command is handled so just return. + */ + if (!xhci->current_cmd || delayed_work_pending(&xhci->cmd_timer)) { + spin_unlock_irqrestore(&xhci->lock, flags); + return; } + /* mark this command to be cancelled */ + xhci->current_cmd->status = COMP_CMD_ABORT; /* Make sure command ring is running before aborting it */ hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) && (hw_ring_state & CMD_RING_RUNNING)) { - spin_unlock_irqrestore(&xhci->lock, flags); + /* Prevent new doorbell, and start command abort */ + xhci->cmd_ring_state = CMD_RING_STATE_ABORTED; xhci_dbg(xhci, "Command timeout\n"); - ret = xhci_abort_cmd_ring(xhci); + ret = xhci_abort_cmd_ring(xhci, flags); if (unlikely(ret == -ESHUTDOWN)) { xhci_err(xhci, "Abort command ring failed\n"); xhci_cleanup_command_queue(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); xhci_dbg(xhci, "xHCI host controller is dead.\n"); + + return; } - return; + + goto time_out_completed; } - /* command ring failed to restart, or host removed. Bail out */ - if (second_timeout || xhci->xhc_state & XHCI_STATE_REMOVING) { - spin_unlock_irqrestore(&xhci->lock, flags); - xhci_dbg(xhci, "command timed out twice, ring start fail?\n"); + /* host removed. Bail out */ + if (xhci->xhc_state & XHCI_STATE_REMOVING) { + xhci_dbg(xhci, "host removed, ring start fail?\n"); xhci_cleanup_command_queue(xhci); - return; + + goto time_out_completed; } /* command timeout on stopped ring, ring can't be aborted */ xhci_dbg(xhci, "Command timeout on stopped ring\n"); xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd); + +time_out_completed: spin_unlock_irqrestore(&xhci->lock, flags); return; } @@ -1335,7 +1352,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, cmd = list_entry(xhci->cmd_list.next, struct xhci_command, cmd_list); - del_timer(&xhci->cmd_timer); + cancel_delayed_work(&xhci->cmd_timer); trace_xhci_cmd_completion(cmd_trb, (struct xhci_generic_trb *) event); @@ -1343,7 +1360,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, /* If CMD ring stopped we own the trbs between enqueue and dequeue */ if (cmd_comp_code == COMP_CMD_STOP) { - xhci_handle_stopped_cmd_ring(xhci, cmd); + complete_all(&xhci->cmd_ring_stop_completion); return; } @@ -1361,8 +1378,11 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, */ if (cmd_comp_code == COMP_CMD_ABORT) { xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; - if (cmd->status == COMP_CMD_ABORT) + if (cmd->status == COMP_CMD_ABORT) { + if (xhci->current_cmd == cmd) + xhci->current_cmd = NULL; goto event_handled; + } } cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3])); @@ -1423,7 +1443,9 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, if (cmd->cmd_list.next != &xhci->cmd_list) { xhci->current_cmd = list_entry(cmd->cmd_list.next, struct xhci_command, cmd_list); - mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT); + xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT); + } else if (xhci->current_cmd == cmd) { + xhci->current_cmd = NULL; } event_handled: @@ -4206,9 +4228,9 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd, /* if there are no other commands queued we start the timeout timer */ if (xhci->cmd_list.next == &cmd->cmd_list && - !timer_pending(&xhci->cmd_timer)) { + !delayed_work_pending(&xhci->cmd_timer)) { xhci->current_cmd = cmd; - mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT); + xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT); } queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3, diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8c6bb15ef51f..82391a0dbc7b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -121,10 +121,10 @@ int xhci_halt(struct xhci_hcd *xhci) xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; - if (timer_pending(&xhci->cmd_timer)) { + if (delayed_work_pending(&xhci->cmd_timer)) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Cleanup command queue"); - del_timer(&xhci->cmd_timer); + cancel_delayed_work(&xhci->cmd_timer); xhci_cleanup_command_queue(xhci); } @@ -1579,19 +1579,6 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) xhci_urb_free_priv(urb_priv); return ret; } - if ((xhci->xhc_state & XHCI_STATE_DYING) || - (xhci->xhc_state & XHCI_STATE_HALTED)) { - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Ep 0x%x: URB %pK to be canceled on " - "non-responsive xHCI host.", - urb->ep->desc.bEndpointAddress, urb); - /* Let the stop endpoint command watchdog timer (which set this - * state) finish cleaning up the endpoint TD lists. We must - * have caught it in the middle of dropping a lock and giving - * back an URB. - */ - goto done; - } ep_index = xhci_get_endpoint_index(&urb->ep->desc); ep = &xhci->devs[urb->dev->slot_id]->eps[ep_index]; @@ -3818,8 +3805,10 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, mutex_lock(&xhci->mutex); - if (xhci->xhc_state) /* dying, removing or halted */ + if (xhci->xhc_state) { /* dying, removing or halted */ + ret = -ESHUTDOWN; goto out; + } if (!udev->slot_id) { xhci_dbg_trace(xhci, trace_xhci_dbg_address, diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 097cfa9e4692..8fcec1be6b1a 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -312,6 +312,8 @@ struct xhci_op_regs { #define XDEV_U2 (0x2 << 5) #define XDEV_U3 (0x3 << 5) #define XDEV_INACTIVE (0x6 << 5) +#define XDEV_POLLING (0x7 << 5) +#define XDEV_COMP_MODE (0xa << 5) #define XDEV_RESUME (0xf << 5) /* true: port has power (see HCC_PPC) */ #define PORT_POWER (1 << 9) @@ -1553,7 +1555,8 @@ struct xhci_hcd { #define CMD_RING_STATE_STOPPED (1 << 2) struct list_head cmd_list; unsigned int cmd_ring_reserved_trbs; - struct timer_list cmd_timer; + struct delayed_work cmd_timer; + struct completion cmd_ring_stop_completion; struct xhci_command *current_cmd; struct xhci_ring *event_ring; struct xhci_erst erst; @@ -1639,6 +1642,7 @@ struct xhci_hcd { /* For controllers with a broken beyond repair streams implementation */ #define XHCI_BROKEN_STREAMS (1 << 19) #define XHCI_PME_STUCK_QUIRK (1 << 20) +#define XHCI_MISSING_CAS (1 << 24) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ @@ -1922,7 +1926,7 @@ void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct xhci_dequeue_state *deq_state); void xhci_stop_endpoint_command_watchdog(unsigned long arg); -void xhci_handle_command_timeout(unsigned long data); +void xhci_handle_command_timeout(struct work_struct *work); void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id); diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 310238c6b5cd..896798071817 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -469,6 +469,7 @@ static const struct musb_platform_ops bfin_ops = { .init = bfin_musb_init, .exit = bfin_musb_exit, + .fifo_offset = bfin_fifo_offset, .readb = bfin_readb, .writeb = bfin_writeb, .readw = bfin_readw, diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 2337d7a7d62d..90de7900e4b8 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -214,6 +214,7 @@ struct musb_platform_ops { dma_addr_t *dma_addr, u32 *len); void (*pre_root_reset_end)(struct musb *musb); void (*post_root_reset_end)(struct musb *musb); + void (*clear_ep_rxintr)(struct musb *musb, int epnum); }; /* @@ -612,4 +613,10 @@ static inline void musb_platform_post_root_reset_end(struct musb *musb) musb->ops->post_root_reset_end(musb); } +static inline void musb_platform_clear_ep_rxintr(struct musb *musb, int epnum) +{ + if (musb->ops->clear_ep_rxintr) + musb->ops->clear_ep_rxintr(musb, epnum); +} + #endif /* __MUSB_CORE_H__ */ diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index eeb7d9ecf7df..5a021b26d7d2 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -301,6 +301,17 @@ static void otg_timer(unsigned long _musb) spin_unlock_irqrestore(&musb->lock, flags); } +void dsps_musb_clear_ep_rxintr(struct musb *musb, int epnum) +{ + u32 epintr; + struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent); + const struct dsps_musb_wrapper *wrp = glue->wrp; + + /* musb->lock might already been held */ + epintr = (1 << epnum) << wrp->rxep_shift; + musb_writel(musb->ctrl_base, wrp->epintr_status, epintr); +} + static irqreturn_t dsps_interrupt(int irq, void *hci) { struct musb *musb = hci; @@ -647,6 +658,7 @@ static struct musb_platform_ops dsps_ops = { .try_idle = dsps_musb_try_idle, .set_mode = dsps_musb_set_mode, .recover = dsps_musb_recover, + .clear_ep_rxintr = dsps_musb_clear_ep_rxintr, }; static u64 musb_dmamask = DMA_BIT_MASK(32); diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index e0a083f6ab68..13d5614f37f1 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2390,12 +2390,11 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh) int is_in = usb_pipein(urb->pipe); int status = 0; u16 csr; + struct dma_channel *dma = NULL; musb_ep_select(regs, hw_end); if (is_dma_capable()) { - struct dma_channel *dma; - dma = is_in ? ep->rx_channel : ep->tx_channel; if (dma) { status = ep->musb->dma_controller->channel_abort(dma); @@ -2412,10 +2411,9 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh) /* giveback saves bulk toggle */ csr = musb_h_flush_rxfifo(ep, 0); - /* REVISIT we still get an irq; should likely clear the - * endpoint's irq status here to avoid bogus irqs. - * clearing that status is platform-specific... - */ + /* clear the endpoint's irq status here to avoid bogus irqs */ + if (is_dma_capable() && dma) + musb_platform_clear_ep_rxintr(musb, ep->epnum); } else if (ep->epnum) { musb_h_tx_flush_fifo(ep); csr = musb_readw(epio, MUSB_TXCSR); diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h index f7b13fd25257..a3dcbd55e436 100644 --- a/drivers/usb/musb/musbhsdma.h +++ b/drivers/usb/musb/musbhsdma.h @@ -157,5 +157,5 @@ struct musb_dma_controller { void __iomem *base; u8 channel_count; u8 used_channels; - u8 irq; + int irq; }; diff --git a/drivers/usb/phy/phy-am335x-control.c b/drivers/usb/phy/phy-am335x-control.c index 7b3035ff9434..1b4d742a2397 100644 --- a/drivers/usb/phy/phy-am335x-control.c +++ b/drivers/usb/phy/phy-am335x-control.c @@ -126,10 +126,12 @@ struct phy_control *am335x_get_phy_control(struct device *dev) return NULL; dev = bus_find_device(&platform_bus_type, NULL, node, match); + of_node_put(node); if (!dev) return NULL; ctrl_usb = dev_get_drvdata(dev); + put_device(dev); if (!ctrl_usb) return NULL; return &ctrl_usb->phy_ctrl; diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index c73808f095bb..71133d96f97d 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -99,6 +99,8 @@ static int ch341_control_out(struct usb_device *dev, u8 request, r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, value, index, NULL, 0, DEFAULT_TIMEOUT); + if (r < 0) + dev_err(&dev->dev, "failed to send control message: %d\n", r); return r; } @@ -116,7 +118,20 @@ static int ch341_control_in(struct usb_device *dev, r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, value, index, buf, bufsize, DEFAULT_TIMEOUT); - return r; + if (r < bufsize) { + if (r >= 0) { + dev_err(&dev->dev, + "short control message received (%d < %u)\n", + r, bufsize); + r = -EIO; + } + + dev_err(&dev->dev, "failed to receive control message: %d\n", + r); + return r; + } + + return 0; } static int ch341_set_baudrate(struct usb_device *dev, @@ -158,9 +173,9 @@ static int ch341_set_handshake(struct usb_device *dev, u8 control) static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) { + const unsigned int size = 2; char *buffer; int r; - const unsigned size = 8; unsigned long flags; buffer = kmalloc(size, GFP_KERNEL); @@ -171,14 +186,9 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) if (r < 0) goto out; - /* setup the private status if available */ - if (r == 2) { - r = 0; - spin_lock_irqsave(&priv->lock, flags); - priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; - spin_unlock_irqrestore(&priv->lock, flags); - } else - r = -EPROTO; + spin_lock_irqsave(&priv->lock, flags); + priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; + spin_unlock_irqrestore(&priv->lock, flags); out: kfree(buffer); return r; @@ -188,9 +198,9 @@ out: kfree(buffer); static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) { + const unsigned int size = 2; char *buffer; int r; - const unsigned size = 8; buffer = kmalloc(size, GFP_KERNEL); if (!buffer) @@ -253,7 +263,6 @@ static int ch341_port_probe(struct usb_serial_port *port) spin_lock_init(&priv->lock); priv->baud_rate = DEFAULT_BAUD_RATE; - priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; r = ch341_configure(port->serial->dev, priv); if (r < 0) @@ -315,7 +324,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) r = ch341_configure(serial->dev, priv); if (r) - goto out; + return r; if (tty) ch341_set_termios(tty, port, NULL); @@ -325,12 +334,19 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) if (r) { dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n", __func__, r); - goto out; + return r; } r = usb_serial_generic_open(tty, port); + if (r) + goto err_kill_interrupt_urb; -out: return r; + return 0; + +err_kill_interrupt_urb: + usb_kill_urb(port->interrupt_in_urb); + + return r; } /* Old_termios contains the original termios settings and @@ -345,26 +361,25 @@ static void ch341_set_termios(struct tty_struct *tty, baud_rate = tty_get_baud_rate(tty); - priv->baud_rate = baud_rate; - if (baud_rate) { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); - spin_unlock_irqrestore(&priv->lock, flags); + priv->baud_rate = baud_rate; ch341_set_baudrate(port->serial->dev, priv); - } else { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); - spin_unlock_irqrestore(&priv->lock, flags); } - ch341_set_handshake(port->serial->dev, priv->line_control); - /* Unimplemented: * (cflag & CSIZE) : data bits [5, 8] * (cflag & PARENB) : parity {NONE, EVEN, ODD} * (cflag & CSTOPB) : stop bits [1, 2] */ + + spin_lock_irqsave(&priv->lock, flags); + if (C_BAUD(tty) == B0) + priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) + priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); + spin_unlock_irqrestore(&priv->lock, flags); + + ch341_set_handshake(port->serial->dev, priv->line_control); } static void ch341_break_ctl(struct tty_struct *tty, int break_state) @@ -539,14 +554,23 @@ static int ch341_tiocmget(struct tty_struct *tty) static int ch341_reset_resume(struct usb_serial *serial) { - struct ch341_private *priv; - - priv = usb_get_serial_port_data(serial->port[0]); + struct usb_serial_port *port = serial->port[0]; + struct ch341_private *priv = usb_get_serial_port_data(port); + int ret; /* reconfigure ch341 serial port after bus-reset */ ch341_configure(serial->dev, priv); - return 0; + if (test_bit(ASYNCB_INITIALIZED, &port->port.flags)) { + ret = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); + if (ret) { + dev_err(&port->dev, "failed to submit interrupt urb: %d\n", + ret); + return ret; + } + } + + return usb_serial_generic_resume(serial); } static struct usb_serial_driver ch341_device = { diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 2916dea3ede8..8948f375e75d 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -50,6 +50,7 @@ #define CYBERJACK_PRODUCT_ID 0x0100 /* Function prototypes */ +static int cyberjack_attach(struct usb_serial *serial); static int cyberjack_port_probe(struct usb_serial_port *port); static int cyberjack_port_remove(struct usb_serial_port *port); static int cyberjack_open(struct tty_struct *tty, @@ -77,6 +78,7 @@ static struct usb_serial_driver cyberjack_device = { .description = "Reiner SCT Cyberjack USB card reader", .id_table = id_table, .num_ports = 1, + .attach = cyberjack_attach, .port_probe = cyberjack_port_probe, .port_remove = cyberjack_port_remove, .open = cyberjack_open, @@ -100,6 +102,14 @@ struct cyberjack_private { short wrsent; /* Data already sent */ }; +static int cyberjack_attach(struct usb_serial *serial) +{ + if (serial->num_bulk_out < serial->num_ports) + return -ENODEV; + + return 0; +} + static int cyberjack_port_probe(struct usb_serial_port *port) { struct cyberjack_private *priv; diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index db591d19d416..37d0e8cc7af6 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1044,6 +1044,7 @@ static int garmin_write_bulk(struct usb_serial_port *port, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __func__, status); count = status; + kfree(buffer); } /* we are done with this urb, so let the host driver diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 1947ea0e0988..b63a6c3899c5 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2761,6 +2761,11 @@ static int edge_startup(struct usb_serial *serial) EDGE_COMPATIBILITY_MASK1, EDGE_COMPATIBILITY_MASK2 }; + if (serial->num_bulk_in < 1 || serial->num_interrupt_in < 1) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + dev = serial->dev; /* create our private serial structure */ diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index fce82fd79f77..c02808a30436 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -1499,8 +1499,7 @@ static int do_boot_mode(struct edgeport_serial *serial, dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__); - /* return an error on purpose */ - return -ENODEV; + return 1; } stayinbootmode: @@ -1508,7 +1507,7 @@ stayinbootmode: dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__); serial->product_info.TiMode = TI_MODE_BOOT; - return 0; + return 1; } static int ti_do_config(struct edgeport_port *port, int feature, int on) @@ -2549,6 +2548,13 @@ static int edge_startup(struct usb_serial *serial) int status; u16 product_id; + /* Make sure we have the required endpoints when in download mode. */ + if (serial->interface->cur_altsetting->desc.bNumEndpoints > 1) { + if (serial->num_bulk_in < serial->num_ports || + serial->num_bulk_out < serial->num_ports) + return -ENODEV; + } + /* create our private serial structure */ edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); if (!edge_serial) @@ -2556,14 +2562,18 @@ static int edge_startup(struct usb_serial *serial) mutex_init(&edge_serial->es_lock); edge_serial->serial = serial; + INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work); usb_set_serial_data(serial, edge_serial); status = download_fw(edge_serial); - if (status) { + if (status < 0) { kfree(edge_serial); return status; } + if (status > 0) + return 1; /* bind but do not register any ports */ + product_id = le16_to_cpu( edge_serial->serial->dev->descriptor.idProduct); @@ -2575,7 +2585,6 @@ static int edge_startup(struct usb_serial *serial) } } - INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work); edge_heartbeat_schedule(edge_serial); return 0; @@ -2583,6 +2592,9 @@ static int edge_startup(struct usb_serial *serial) static void edge_disconnect(struct usb_serial *serial) { + struct edgeport_serial *edge_serial = usb_get_serial_data(serial); + + cancel_delayed_work_sync(&edge_serial->heartbeat_work); } static void edge_release(struct usb_serial *serial) diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 5ad4a0fb4b26..7ed7d33d6c10 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -68,6 +68,16 @@ struct iuu_private { u32 clk; }; +static int iuu_attach(struct usb_serial *serial) +{ + unsigned char num_ports = serial->num_ports; + + if (serial->num_bulk_in < num_ports || serial->num_bulk_out < num_ports) + return -ENODEV; + + return 0; +} + static int iuu_port_probe(struct usb_serial_port *port) { struct iuu_private *priv; @@ -1196,6 +1206,7 @@ static struct usb_serial_driver iuu_device = { .tiocmset = iuu_tiocmset, .set_termios = iuu_set_termios, .init_termios = iuu_init_termios, + .attach = iuu_attach, .port_probe = iuu_port_probe, .port_remove = iuu_port_remove, }; diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 4f7e072e4e00..930be98d59b3 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -699,6 +699,19 @@ MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw"); MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw"); #endif +static int keyspan_pda_attach(struct usb_serial *serial) +{ + unsigned char num_ports = serial->num_ports; + + if (serial->num_bulk_out < num_ports || + serial->num_interrupt_in < num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int keyspan_pda_port_probe(struct usb_serial_port *port) { @@ -776,6 +789,7 @@ static struct usb_serial_driver keyspan_pda_device = { .break_ctl = keyspan_pda_break_ctl, .tiocmget = keyspan_pda_tiocmget, .tiocmset = keyspan_pda_tiocmset, + .attach = keyspan_pda_attach, .port_probe = keyspan_pda_port_probe, .port_remove = keyspan_pda_port_remove, }; diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index e020ad28a00c..83c823d32ff9 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -192,10 +192,11 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, status_buf, KLSI_STATUSBUF_LEN, 10000 ); - if (rc < 0) - dev_err(&port->dev, "Reading line status failed (error = %d)\n", - rc); - else { + if (rc != KLSI_STATUSBUF_LEN) { + dev_err(&port->dev, "reading line status failed: %d\n", rc); + if (rc >= 0) + rc = -EIO; + } else { status = get_unaligned_le16(status_buf); dev_info(&port->serial->dev->dev, "read status %x %x\n", @@ -296,7 +297,7 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) rc = usb_serial_generic_open(tty, port); if (rc) { retval = rc; - goto exit; + goto err_free_cfg; } rc = usb_control_msg(port->serial->dev, @@ -311,21 +312,38 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) if (rc < 0) { dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc); retval = rc; + goto err_generic_close; } else dev_dbg(&port->dev, "%s - enabled reading\n", __func__); rc = klsi_105_get_line_state(port, &line_state); - if (rc >= 0) { - spin_lock_irqsave(&priv->lock, flags); - priv->line_state = line_state; - spin_unlock_irqrestore(&priv->lock, flags); - dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state); - retval = 0; - } else + if (rc < 0) { retval = rc; + goto err_disable_read; + } + + spin_lock_irqsave(&priv->lock, flags); + priv->line_state = line_state; + spin_unlock_irqrestore(&priv->lock, flags); + dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, + line_state); + + return 0; -exit: +err_disable_read: + usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + KL5KUSB105A_SIO_CONFIGURE, + USB_TYPE_VENDOR | USB_DIR_OUT, + KL5KUSB105A_SIO_CONFIGURE_READ_OFF, + 0, /* index */ + NULL, 0, + KLSI_TIMEOUT); +err_generic_close: + usb_serial_generic_close(port); +err_free_cfg: kfree(cfg); + return retval; } diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 2363654cafc9..813035f51fe7 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -51,6 +51,7 @@ /* Function prototypes */ +static int kobil_attach(struct usb_serial *serial); static int kobil_port_probe(struct usb_serial_port *probe); static int kobil_port_remove(struct usb_serial_port *probe); static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port); @@ -86,6 +87,7 @@ static struct usb_serial_driver kobil_device = { .description = "KOBIL USB smart card terminal", .id_table = id_table, .num_ports = 1, + .attach = kobil_attach, .port_probe = kobil_port_probe, .port_remove = kobil_port_remove, .ioctl = kobil_ioctl, @@ -113,6 +115,16 @@ struct kobil_private { }; +static int kobil_attach(struct usb_serial *serial) +{ + if (serial->num_interrupt_out < serial->num_ports) { + dev_err(&serial->interface->dev, "missing interrupt-out endpoint\n"); + return -ENODEV; + } + + return 0; +} + static int kobil_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 63db004af21f..e56cdb436de3 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -65,8 +65,6 @@ struct moschip_port { struct urb *write_urb_pool[NUM_URBS]; }; -static struct usb_serial_driver moschip7720_2port_driver; - #define USB_VENDOR_ID_MOSCHIP 0x9710 #define MOSCHIP_DEVICE_ID_7720 0x7720 #define MOSCHIP_DEVICE_ID_7715 0x7715 @@ -970,25 +968,6 @@ static void mos7720_bulk_out_data_callback(struct urb *urb) tty_port_tty_wakeup(&mos7720_port->port->port); } -/* - * mos77xx_probe - * this function installs the appropriate read interrupt endpoint callback - * depending on whether the device is a 7720 or 7715, thus avoiding costly - * run-time checks in the high-frequency callback routine itself. - */ -static int mos77xx_probe(struct usb_serial *serial, - const struct usb_device_id *id) -{ - if (id->idProduct == MOSCHIP_DEVICE_ID_7715) - moschip7720_2port_driver.read_int_callback = - mos7715_interrupt_callback; - else - moschip7720_2port_driver.read_int_callback = - mos7720_interrupt_callback; - - return 0; -} - static int mos77xx_calc_num_ports(struct usb_serial *serial) { u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); @@ -1920,6 +1899,11 @@ static int mos7720_startup(struct usb_serial *serial) u16 product; int ret_val; + if (serial->num_bulk_in < 2 || serial->num_bulk_out < 2) { + dev_err(&serial->interface->dev, "missing bulk endpoints\n"); + return -ENODEV; + } + product = le16_to_cpu(serial->dev->descriptor.idProduct); dev = serial->dev; @@ -1944,19 +1928,18 @@ static int mos7720_startup(struct usb_serial *serial) tmp->interrupt_in_endpointAddress; serial->port[1]->interrupt_in_urb = NULL; serial->port[1]->interrupt_in_buffer = NULL; + + if (serial->port[0]->interrupt_in_urb) { + struct urb *urb = serial->port[0]->interrupt_in_urb; + + urb->complete = mos7715_interrupt_callback; + } } /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); - /* start the interrupt urb */ - ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); - if (ret_val) - dev_err(&dev->dev, - "%s - Error %d submitting control urb\n", - __func__, ret_val); - #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT if (product == MOSCHIP_DEVICE_ID_7715) { ret_val = mos7715_parport_init(serial); @@ -1964,6 +1947,13 @@ static int mos7720_startup(struct usb_serial *serial) return ret_val; } #endif + /* start the interrupt urb */ + ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); + if (ret_val) { + dev_err(&dev->dev, "failed to submit interrupt urb: %d\n", + ret_val); + } + /* LSR For Port 1 */ read_mos_reg(serial, 0, MOS7720_LSR, &data); dev_dbg(&dev->dev, "LSR:%x\n", data); @@ -1973,6 +1963,8 @@ static int mos7720_startup(struct usb_serial *serial) static void mos7720_release(struct usb_serial *serial) { + usb_kill_urb(serial->port[0]->interrupt_in_urb); + #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT /* close the parallel port */ @@ -2056,7 +2048,6 @@ static struct usb_serial_driver moschip7720_2port_driver = { .close = mos7720_close, .throttle = mos7720_throttle, .unthrottle = mos7720_unthrottle, - .probe = mos77xx_probe, .attach = mos7720_startup, .release = mos7720_release, .port_probe = mos7720_port_probe, @@ -2070,7 +2061,7 @@ static struct usb_serial_driver moschip7720_2port_driver = { .chars_in_buffer = mos7720_chars_in_buffer, .break_ctl = mos7720_break, .read_bulk_callback = mos7720_bulk_in_callback, - .read_int_callback = NULL /* dynamically assigned in probe() */ + .read_int_callback = mos7720_interrupt_callback, }; static struct usb_serial_driver * const serial_drivers[] = { diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 7f3ddd7ba2ce..97ea52b5cfd4 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2116,6 +2116,17 @@ static int mos7840_calc_num_ports(struct usb_serial *serial) return mos7840_num_ports; } +static int mos7840_attach(struct usb_serial *serial) +{ + if (serial->num_bulk_in < serial->num_ports || + serial->num_bulk_out < serial->num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int mos7840_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; @@ -2391,6 +2402,7 @@ static struct usb_serial_driver moschip7840_4port_device = { .tiocmset = mos7840_tiocmset, .tiocmiwait = usb_serial_generic_tiocmiwait, .get_icount = usb_serial_generic_get_icount, + .attach = mos7840_attach, .port_probe = mos7840_port_probe, .port_remove = mos7840_port_remove, .read_bulk_callback = mos7840_bulk_in_callback, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index f6c6900bccf0..a180b17d2432 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -38,6 +38,7 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int omninet_write_room(struct tty_struct *tty); static void omninet_disconnect(struct usb_serial *serial); +static int omninet_attach(struct usb_serial *serial); static int omninet_port_probe(struct usb_serial_port *port); static int omninet_port_remove(struct usb_serial_port *port); @@ -56,6 +57,7 @@ static struct usb_serial_driver zyxel_omninet_device = { .description = "ZyXEL - omni.net lcd plus usb", .id_table = id_table, .num_ports = 1, + .attach = omninet_attach, .port_probe = omninet_port_probe, .port_remove = omninet_port_remove, .open = omninet_open, @@ -104,6 +106,17 @@ struct omninet_data { __u8 od_outseq; /* Sequence number for bulk_out URBs */ }; +static int omninet_attach(struct usb_serial *serial) +{ + /* The second bulk-out endpoint is used for writing. */ + if (serial->num_bulk_out < 2) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int omninet_port_probe(struct usb_serial_port *port) { struct omninet_data *od; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9894e341c6ac..42cc72e54c05 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -268,6 +268,8 @@ static void option_instat_callback(struct urb *urb); #define TELIT_PRODUCT_CC864_SINGLE 0x1006 #define TELIT_PRODUCT_DE910_DUAL 0x1010 #define TELIT_PRODUCT_UE910_V2 0x1012 +#define TELIT_PRODUCT_LE922_USBCFG1 0x1040 +#define TELIT_PRODUCT_LE922_USBCFG2 0x1041 #define TELIT_PRODUCT_LE922_USBCFG0 0x1042 #define TELIT_PRODUCT_LE922_USBCFG3 0x1043 #define TELIT_PRODUCT_LE922_USBCFG5 0x1045 @@ -1210,6 +1212,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0), .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG1), + .driver_info = (kernel_ulong_t)&telit_le910_blacklist }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG2), + .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3), .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff), @@ -1989,6 +1995,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) }, { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) }, + { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) }, /* D-Link DWM-158 */ { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff), /* D-Link DWM-221 B1 */ .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ @@ -2000,6 +2007,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index a4b88bc038b6..b8bf52bf7a94 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -134,6 +134,7 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty); static int oti6858_tiocmget(struct tty_struct *tty); static int oti6858_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); +static int oti6858_attach(struct usb_serial *serial); static int oti6858_port_probe(struct usb_serial_port *port); static int oti6858_port_remove(struct usb_serial_port *port); @@ -158,6 +159,7 @@ static struct usb_serial_driver oti6858_device = { .write_bulk_callback = oti6858_write_bulk_callback, .write_room = oti6858_write_room, .chars_in_buffer = oti6858_chars_in_buffer, + .attach = oti6858_attach, .port_probe = oti6858_port_probe, .port_remove = oti6858_port_remove, }; @@ -324,6 +326,20 @@ static void send_data(struct work_struct *work) usb_serial_port_softint(port); } +static int oti6858_attach(struct usb_serial *serial) +{ + unsigned char num_ports = serial->num_ports; + + if (serial->num_bulk_in < num_ports || + serial->num_bulk_out < num_ports || + serial->num_interrupt_in < num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int oti6858_port_probe(struct usb_serial_port *port) { struct oti6858_private *priv; diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index ae682e4eeaef..1db4b61bdf7b 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -49,6 +49,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, + { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) }, { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) }, { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) }, { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) }, @@ -220,9 +221,17 @@ static int pl2303_probe(struct usb_serial *serial, static int pl2303_startup(struct usb_serial *serial) { struct pl2303_serial_private *spriv; + unsigned char num_ports = serial->num_ports; enum pl2303_type type = TYPE_01; unsigned char *buf; + if (serial->num_bulk_in < num_ports || + serial->num_bulk_out < num_ports || + serial->num_interrupt_in < num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); if (!spriv) return -ENOMEM; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index e3b7af8adfb7..09d9be88209e 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -27,6 +27,7 @@ #define ATEN_VENDOR_ID 0x0557 #define ATEN_VENDOR_ID2 0x0547 #define ATEN_PRODUCT_ID 0x2008 +#define ATEN_PRODUCT_ID2 0x2118 #define IODATA_VENDOR_ID 0x04bb #define IODATA_PRODUCT_ID 0x0a03 diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 1bc6089b9008..696458db7e3c 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -124,6 +124,7 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1410, 0xa021)}, /* Novatel Gobi 3000 Composite */ {USB_DEVICE(0x413c, 0x8193)}, /* Dell Gobi 3000 QDL */ {USB_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */ + {USB_DEVICE(0x413c, 0x81a6)}, /* Dell DW5570 QDL (MC8805) */ {USB_DEVICE(0x1199, 0x68a4)}, /* Sierra Wireless QDL */ {USB_DEVICE(0x1199, 0x68a5)}, /* Sierra Wireless Modem */ {USB_DEVICE(0x1199, 0x68a8)}, /* Sierra Wireless QDL */ diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index b18974cbd995..a3ed07c58754 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -408,16 +408,12 @@ static void qt2_close(struct usb_serial_port *port) { struct usb_serial *serial; struct qt2_port_private *port_priv; - unsigned long flags; int i; serial = port->serial; port_priv = usb_get_serial_port_data(port); - spin_lock_irqsave(&port_priv->urb_lock, flags); usb_kill_urb(port_priv->write_urb); - port_priv->urb_in_use = false; - spin_unlock_irqrestore(&port_priv->urb_lock, flags); /* flush the port transmit buffer */ i = usb_control_msg(serial->dev, diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index ef0dbf0703c5..475e6c31b266 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -154,6 +154,19 @@ static int spcp8x5_probe(struct usb_serial *serial, return 0; } +static int spcp8x5_attach(struct usb_serial *serial) +{ + unsigned char num_ports = serial->num_ports; + + if (serial->num_bulk_in < num_ports || + serial->num_bulk_out < num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int spcp8x5_port_probe(struct usb_serial_port *port) { const struct usb_device_id *id = usb_get_serial_data(port->serial); @@ -477,6 +490,7 @@ static struct usb_serial_driver spcp8x5_device = { .tiocmget = spcp8x5_tiocmget, .tiocmset = spcp8x5_tiocmset, .probe = spcp8x5_probe, + .attach = spcp8x5_attach, .port_probe = spcp8x5_port_probe, .port_remove = spcp8x5_port_remove, }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 2694df2f4559..535fcfafc097 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -339,6 +339,13 @@ static int ti_startup(struct usb_serial *serial) goto free_tdev; } + if (serial->num_bulk_in < serial->num_ports || + serial->num_bulk_out < serial->num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + status = -ENODEV; + goto free_tdev; + } + return 0; free_tdev: diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 7ffe4209067b..640a2e2ec04d 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2135,6 +2135,13 @@ UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), +/* Reported-by George Cherian <george.cherian@cavium.com> */ +UNUSUAL_DEV(0x152d, 0x9561, 0x0000, 0x9999, + "JMicron", + "JMS56x", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_REPORT_OPCODES), + /* * Patch by Constantin Baranov <const@tltsu.ru> * Report by Andreas Koenecke. |