Merge 4.4.237 into android-4.4-p

Changes in 4.4.237
	ARM: dts: socfpga: fix register entry for timer3 on Arria10
	scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA
	drivers/net/wan/lapbether: Added needed_tailroom
	firestream: Fix memleak in fs_open
	drivers/net/wan/lapbether: Set network_header before transmitting
	xfs: initialize the shortform attr header padding entry
	drivers/net/wan/hdlc_cisco: Add hard_header_len
	ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled
	gcov: Disable gcov build with GCC 10
	iio: adc: mcp3422: fix locking scope
	iio: adc: mcp3422: fix locking on error path
	iio:light:ltr501 Fix timestamp alignment issue.
	iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak.
	iio:accel:mma8452: Fix timestamp alignment and prevent data leak.
	USB: core: add helpers to retrieve endpoints
	staging: wlan-ng: fix out of bounds read in prism2sta_probe_usb()
	btrfs: fix wrong address when faulting in pages in the search ioctl
	scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem
	rbd: require global CAP_SYS_ADMIN for mapping and unmapping
	fbcon: remove soft scrollback code
	fbcon: remove now unusued 'softback_lines' cursor() argument
	vgacon: remove software scrollback support
	KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit
	video: fbdev: fix OOB read in vga_8planes_imageblit()
	USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter
	USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules
	usb: Fix out of sync data toggle if a configured device is reconfigured
	gcov: add support for GCC 10.1
	NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall
	scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort
	scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery
	SUNRPC: stop printk reading past end of string
	rapidio: Replace 'select' DMAENGINES 'with depends on'
	i2c: algo: pca: Reapply i2c bus settings after reset
	MIPS: SNI: Fix MIPS_L1_CACHE_SHIFT
	perf test: Free formats for perf pmu parse test
	fbcon: Fix user font detection test at fbcon_resize().
	MIPS: SNI: Fix spurious interrupts
	USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook
	USB: UAS: fix disconnect by unplugging a hub
	usblp: fix race between disconnect() and read()
	Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists
	serial: 8250_pci: Add Realtek 816a and 816b
	ehci-hcd: Move include to keep CRC stable
	powerpc/dma: Fix dma_map_ops::get_required_mask
	x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y
	Linux 4.4.237

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: If3f7701823084090849a6866ba1e52a0276c9621

10 files changed, 151 insertions, 52 deletions

diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index c578d64edc15..71c2ae4b8106 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -840,6 +840,11 @@ static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, lo
 	if (rv < 0)
 		return rv;
 
+	if (!usblp->present) {
+		count = -ENODEV;
+		goto done;
+	}
+
 	if ((avail = usblp->rstatus) < 0) {
 		printk(KERN_ERR "usblp%d: error %d reading from printer\n",
 		    usblp->minor, (int)avail);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index f083ecfddd1b..e568325cb6e1 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1141,6 +1141,34 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
 	}
 }
 
+/*
+ * usb_disable_device_endpoints -- Disable all endpoints for a device
+ * @dev: the device whose endpoints are being disabled
+ * @skip_ep0: 0 to disable endpoint 0, 1 to skip it.
+ */
+static void usb_disable_device_endpoints(struct usb_device *dev, int skip_ep0)
+{
+	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
+	int i;
+
+	if (hcd->driver->check_bandwidth) {
+		/* First pass: Cancel URBs, leave endpoint pointers intact. */
+		for (i = skip_ep0; i < 16; ++i) {
+			usb_disable_endpoint(dev, i, false);
+			usb_disable_endpoint(dev, i + USB_DIR_IN, false);
+		}
+		/* Remove endpoints from the host controller internal state */
+		mutex_lock(hcd->bandwidth_mutex);
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		mutex_unlock(hcd->bandwidth_mutex);
+	}
+	/* Second pass: remove endpoint pointers */
+	for (i = skip_ep0; i < 16; ++i) {
+		usb_disable_endpoint(dev, i, true);
+		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
+	}
+}
+
 /**
  * usb_disable_device - Disable all the endpoints for a USB device
  * @dev: the device whose endpoints are being disabled
@@ -1154,7 +1182,6 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
 void usb_disable_device(struct usb_device *dev, int skip_ep0)
 {
 	int i;
-	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
 
 	/* getting rid of interfaces will disconnect
 	 * any drivers bound to them (a key side effect)
@@ -1200,22 +1227,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 
 	dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
 		skip_ep0 ? "non-ep0" : "all");
-	if (hcd->driver->check_bandwidth) {
-		/* First pass: Cancel URBs, leave endpoint pointers intact. */
-		for (i = skip_ep0; i < 16; ++i) {
-			usb_disable_endpoint(dev, i, false);
-			usb_disable_endpoint(dev, i + USB_DIR_IN, false);
-		}
-		/* Remove endpoints from the host controller internal state */
-		mutex_lock(hcd->bandwidth_mutex);
-		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
-		mutex_unlock(hcd->bandwidth_mutex);
-		/* Second pass: remove endpoint pointers */
-	}
-	for (i = skip_ep0; i < 16; ++i) {
-		usb_disable_endpoint(dev, i, true);
-		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
-	}
+
+	usb_disable_device_endpoints(dev, skip_ep0);
 }
 
 /**
@@ -1458,6 +1471,9 @@ EXPORT_SYMBOL_GPL(usb_set_interface);
  * The caller must own the device lock.
  *
  * Return: Zero on success, else a negative error code.
+ *
+ * If this routine fails the device will probably be in an unusable state
+ * with endpoints disabled, and interfaces only partially enabled.
  */
 int usb_reset_configuration(struct usb_device *dev)
 {
@@ -1473,10 +1489,7 @@ int usb_reset_configuration(struct usb_device *dev)
 	 * calls during probe() are fine
 	 */
 
-	for (i = 1; i < 16; ++i) {
-		usb_disable_endpoint(dev, i, true);
-		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
-	}
+	usb_disable_device_endpoints(dev, 1); /* skip ep0*/
 
 	config = dev->actconfig;
 	retval = 0;
@@ -1489,34 +1502,10 @@ int usb_reset_configuration(struct usb_device *dev)
 		mutex_unlock(hcd->bandwidth_mutex);
 		return -ENOMEM;
 	}
-	/* Make sure we have enough bandwidth for each alternate setting 0 */
-	for (i = 0; i < config->desc.bNumInterfaces; i++) {
-		struct usb_interface *intf = config->interface[i];
-		struct usb_host_interface *alt;
 
-		alt = usb_altnum_to_altsetting(intf, 0);
-		if (!alt)
-			alt = &intf->altsetting[0];
-		if (alt != intf->cur_altsetting)
-			retval = usb_hcd_alloc_bandwidth(dev, NULL,
-					intf->cur_altsetting, alt);
-		if (retval < 0)
-			break;
-	}
-	/* If not, reinstate the old alternate settings */
+	/* xHCI adds all endpoints in usb_hcd_alloc_bandwidth */
+	retval = usb_hcd_alloc_bandwidth(dev, config, NULL, NULL);
 	if (retval < 0) {
-reset_old_alts:
-		for (i--; i >= 0; i--) {
-			struct usb_interface *intf = config->interface[i];
-			struct usb_host_interface *alt;
-
-			alt = usb_altnum_to_altsetting(intf, 0);
-			if (!alt)
-				alt = &intf->altsetting[0];
-			if (alt != intf->cur_altsetting)
-				usb_hcd_alloc_bandwidth(dev, NULL,
-						alt, intf->cur_altsetting);
-		}
 		usb_enable_lpm(dev);
 		mutex_unlock(hcd->bandwidth_mutex);
 		return retval;
@@ -1525,8 +1514,12 @@ reset_old_alts:
 			USB_REQ_SET_CONFIGURATION, 0,
 			config->desc.bConfigurationValue, 0,
 			NULL, 0, USB_CTRL_SET_TIMEOUT);
-	if (retval < 0)
-		goto reset_old_alts;
+	if (retval < 0) {
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		usb_enable_lpm(dev);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return retval;
+	}
 	mutex_unlock(hcd->bandwidth_mutex);
 
 	/* re-init hc/hcd interface/endpoint state */
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index eed7c8d8e3d4..dd72e85f2e17 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -236,6 +236,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Generic RTL8153 based ethernet adapters */
 	{ USB_DEVICE(0x0bda, 0x8153), .driver_info = USB_QUIRK_NO_LPM },
 
+	/* SONiX USB DEVICE Touchpad */
+	{ USB_DEVICE(0x0c45, 0x7056), .driver_info =
+			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+
 	/* Action Semiconductor flash disk */
 	{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
 			USB_QUIRK_STRING_FETCH_255 },
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 36e5098e4e6f..415e9cf407ba 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -77,6 +77,89 @@ MODULE_PARM_DESC(autosuspend, "default autosuspend delay");
 
 
 /**
+ * usb_find_common_endpoints() -- look up common endpoint descriptors
+ * @alt:	alternate setting to search
+ * @bulk_in:	pointer to descriptor pointer, or NULL
+ * @bulk_out:	pointer to descriptor pointer, or NULL
+ * @int_in:	pointer to descriptor pointer, or NULL
+ * @int_out:	pointer to descriptor pointer, or NULL
+ *
+ * Search the alternate setting's endpoint descriptors for the first bulk-in,
+ * bulk-out, interrupt-in and interrupt-out endpoints and return them in the
+ * provided pointers (unless they are NULL).
+ *
+ * If a requested endpoint is not found, the corresponding pointer is set to
+ * NULL.
+ *
+ * Return: Zero if all requested descriptors were found, or -ENXIO otherwise.
+ */
+int usb_find_common_endpoints(struct usb_host_interface *alt,
+		struct usb_endpoint_descriptor **bulk_in,
+		struct usb_endpoint_descriptor **bulk_out,
+		struct usb_endpoint_descriptor **int_in,
+		struct usb_endpoint_descriptor **int_out)
+{
+	struct usb_endpoint_descriptor *epd;
+	int i;
+
+	if (bulk_in)
+		*bulk_in = NULL;
+	if (bulk_out)
+		*bulk_out = NULL;
+	if (int_in)
+		*int_in = NULL;
+	if (int_out)
+		*int_out = NULL;
+
+	for (i = 0; i < alt->desc.bNumEndpoints; ++i) {
+		epd = &alt->endpoint[i].desc;
+
+		switch (usb_endpoint_type(epd)) {
+		case USB_ENDPOINT_XFER_BULK:
+			if (usb_endpoint_dir_in(epd)) {
+				if (bulk_in && !*bulk_in) {
+					*bulk_in = epd;
+					break;
+				}
+			} else {
+				if (bulk_out && !*bulk_out) {
+					*bulk_out = epd;
+					break;
+				}
+			}
+
+			continue;
+		case USB_ENDPOINT_XFER_INT:
+			if (usb_endpoint_dir_in(epd)) {
+				if (int_in && !*int_in) {
+					*int_in = epd;
+					break;
+				}
+			} else {
+				if (int_out && !*int_out) {
+					*int_out = epd;
+					break;
+				}
+			}
+
+			continue;
+		default:
+			continue;
+		}
+
+		if ((!bulk_in || *bulk_in) &&
+				(!bulk_out || *bulk_out) &&
+				(!int_in || *int_in) &&
+				(!int_out || *int_out)) {
+			return 0;
+		}
+	}
+
+	return -ENXIO;
+}
+EXPORT_SYMBOL_GPL(usb_find_common_endpoints);
+
+/**
  * usb_find_alt_setting() - Given a configuration, find the alternate setting
  * for the given interface.
  * @config: the configuration to search (not necessarily the current config).
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index f7661d9750fd..330e05acf5f7 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -35,6 +35,7 @@
 #include <linux/interrupt.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
 #include <linux/moduleparam.h>
 #include <linux/dma-mapping.h>
 #include <linux/debugfs.h>
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 086a7115d263..4dc93547e927 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -27,7 +27,6 @@
  */
 
 /*-------------------------------------------------------------------------*/
-#include <linux/usb/otg.h>
 
 #define	PORT_WAKE_BITS	(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 0afea511eb37..25e76d4c1505 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -708,6 +708,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_MTIUSBCONVERTER_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
 	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 32a40ab9a385..c33e06752b5f 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -159,6 +159,7 @@
 #define XSENS_AWINDA_DONGLE_PID 0x0102
 #define XSENS_MTW_PID		0x0200	/* Xsens MTw */
 #define XSENS_MTDEVBOARD_PID	0x0300	/* Motion Tracker Development Board */
+#define XSENS_MTIUSBCONVERTER_PID	0x0301	/* MTi USB converter */
 #define XSENS_CONVERTER_PID	0xD00D	/* Xsens USB-serial converter */
 
 /* Xsens devices using FTDI VID */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 52b1092ed57e..8cff50ef4fd1 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1808,6 +1808,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) },	/* Simcom SIM7500/SIM7600 MBIM mode */
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff),	/* Simcom SIM7500/SIM7600 RNDIS mode */
 	  .driver_info = RSVD(7) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9205, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT+ECM mode */
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9206, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT-only mode */
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
 	  .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 698ba127b635..34dcd2e1b4fe 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -646,8 +646,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 	if (devinfo->resetting) {
 		cmnd->result = DID_ERROR << 16;
 		cmnd->scsi_done(cmnd);
-		spin_unlock_irqrestore(&devinfo->lock, flags);
-		return 0;
+		goto zombie;
 	}
 
 	/* Find a free uas-tag */
@@ -682,6 +681,16 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 		cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
 
 	err = uas_submit_urbs(cmnd, devinfo, GFP_ATOMIC);
+	/*
+	 * in case of fatal errors the SCSI layer is peculiar
+	 * a command that has finished is a success for the purpose
+	 * of queueing, no matter how fatal the error
+	 */
+	if (err == -ENODEV) {
+		cmnd->result = DID_ERROR << 16;
+		cmnd->scsi_done(cmnd);
+		goto zombie;
+	}
 	if (err) {
 		/* If we did nothing, give up now */
 		if (cmdinfo->state & SUBMIT_STATUS_URB) {
@@ -692,6 +701,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 	}
 
 	devinfo->cmnd[idx] = cmnd;
+zombie:
 	spin_unlock_irqrestore(&devinfo->lock, flags);
 	return 0;
 }