Merge 4.4.170 into android-4.4

Changes in 4.4.170
	USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
	xhci: Don't prevent USB2 bus suspend in state check intended for USB3 only
	USB: serial: option: add GosunCn ZTE WeLink ME3630
	USB: serial: option: add HP lt4132
	USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode)
	USB: serial: option: add Fibocom NL668 series
	USB: serial: option: add Telit LN940 series
	mmc: core: Reset HPI enabled state during re-init and in case of errors
	mmc: omap_hsmmc: fix DMA API warning
	gpio: max7301: fix driver for use with CONFIG_VMAP_STACK
	Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels
	x86/mtrr: Don't copy uninitialized gentry fields back to userspace
	drm/ioctl: Fix Spectre v1 vulnerabilities
	ip6mr: Fix potential Spectre v1 vulnerability
	ipv4: Fix potential Spectre v1 vulnerability
	ax25: fix a use-after-free in ax25_fillin_cb()
	ibmveth: fix DMA unmap error in ibmveth_xmit_start error path
	ieee802154: lowpan_header_create check must check daddr
	ipv6: explicitly initialize udp6_addr in udp_sock_create6()
	isdn: fix kernel-infoleak in capi_unlocked_ioctl
	netrom: fix locking in nr_find_socket()
	packet: validate address length
	packet: validate address length if non-zero
	sctp: initialize sin6_flowinfo for ipv6 addrs in sctp_inet6addr_event
	vhost: make sure used idx is seen before log in vhost_add_used_n()
	VSOCK: Send reset control packet when socket is partially bound
	xen/netfront: tolerate frags with no data
	gro_cell: add napi_disable in gro_cells_destroy
	sock: Make sock->sk_stamp thread-safe
	ALSA: rme9652: Fix potential Spectre v1 vulnerability
	ALSA: emu10k1: Fix potential Spectre v1 vulnerabilities
	ALSA: pcm: Fix potential Spectre v1 vulnerability
	ALSA: emux: Fix potential Spectre v1 vulnerabilities
	ALSA: hda: add mute LED support for HP EliteBook 840 G4
	ALSA: hda/tegra: clear pending irq handlers
	USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays
	USB: serial: option: add Fibocom NL678 series
	usb: r8a66597: Fix a possible concurrency use-after-free bug in r8a66597_endpoint_disable()
	Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G
	KVM: x86: Use jmp to invoke kvm_spurious_fault() from .fixup
	perf pmu: Suppress potential format-truncation warning
	ext4: fix possible use after free in ext4_quota_enable
	ext4: missing unlock/put_page() in ext4_try_to_write_inline_data()
	ext4: fix EXT4_IOC_GROUP_ADD ioctl
	ext4: force inode writes when nfsd calls commit_metadata()
	spi: bcm2835: Fix race on DMA termination
	spi: bcm2835: Fix book-keeping of DMA termination
	spi: bcm2835: Avoid finishing transfer prematurely in IRQ mode
	cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader.
	media: vivid: free bitmap_cap when updating std/timings/etc.
	MIPS: Ensure pmd_present() returns false after pmd_mknotpresent()
	MIPS: Align kernel load address to 64KB
	CIFS: Fix error mapping for SMB2_LOCK command which caused OFD lock problem
	x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested
	spi: bcm2835: Unbreak the build of esoteric configs
	powerpc: Fix COFF zImage booting on old powermacs
	ARM: imx: update the cpu power up timing setting on i.mx6sx
	Input: restore EV_ABS ABS_RESERVED
	checkstack.pl: fix for aarch64
	xfrm: Fix bucket count reported to userspace
	scsi: bnx2fc: Fix NULL dereference in error handling
	Input: omap-keypad - fix idle configuration to not block SoC idle states
	scsi: zfcp: fix posting too many status read buffers leading to adapter shutdown
	fork: record start_time late
	hwpoison, memory_hotplug: allow hwpoisoned pages to be offlined
	mm, devm_memremap_pages: mark devm_memremap_pages() EXPORT_SYMBOL_GPL
	mm, devm_memremap_pages: kill mapping "System RAM" support
	sunrpc: fix cache_head leak due to queued request
	sunrpc: use SVC_NET() in svcauth_gss_* functions
	crypto: x86/chacha20 - avoid sleeping with preemption disabled
	ALSA: cs46xx: Potential NULL dereference in probe
	ALSA: usb-audio: Avoid access before bLength check in build_audio_procunit()
	ALSA: usb-audio: Fix an out-of-bound read in create_composite_quirks
	dlm: fixed memory leaks after failed ls_remove_names allocation
	dlm: possible memory leak on error path in create_lkb()
	dlm: lost put_lkb on error path in receive_convert() and receive_unlock()
	dlm: memory leaks on error path in dlm_user_request()
	gfs2: Fix loop in gfs2_rbm_find
	b43: Fix error in cordic routine
	9p/net: put a lower bound on msize
	iommu/vt-d: Handle domain agaw being less than iommu agaw
	ceph: don't update importing cap's mseq when handing cap export
	genwqe: Fix size check
	intel_th: msu: Fix an off-by-one in attribute store
	power: supply: olpc_battery: correct the temperature units
	Linux 4.4.170

Change-Id: I1b2927583f8853bfeb3ad11d045c2cf5c5c926f3
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

7 files changed, 46 insertions, 3 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 0a8e5ac891d4..3919ea066bf9 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -507,6 +507,13 @@ static int acm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
 	if (retval)
 		goto error_init_termios;
 
+	/*
+	 * Suppress initial echoing for some devices which might send data
+	 * immediately after acm driver has been installed.
+	 */
+	if (acm->quirks & DISABLE_ECHO)
+		tty->termios.c_lflag &= ~ECHO;
+
 	tty->driver_data = acm;
 
 	return 0;
@@ -1677,6 +1684,9 @@ static const struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x0e8d, 0x2000), /* MediaTek Inc Preloader */
+	.driver_info = DISABLE_ECHO, /* DISABLE ECHO in termios flag */
+	},
 	{ USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index b30ac5fcde68..1ad9ff9f493d 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -134,3 +134,4 @@ struct acm {
 #define QUIRK_CONTROL_LINE_STATE	BIT(6)
 #define CLEAR_HALT_CONDITIONS		BIT(7)
 #define SEND_ZERO_PACKET		BIT(8)
+#define DISABLE_ECHO			BIT(9)
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index a11c2c8bda53..a217f71b45c6 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -1990,6 +1990,8 @@ static int r8a66597_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 
 static void r8a66597_endpoint_disable(struct usb_hcd *hcd,
 				      struct usb_host_endpoint *hep)
+__acquires(r8a66597->lock)
+__releases(r8a66597->lock)
 {
 	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
 	struct r8a66597_pipe *pipe = (struct r8a66597_pipe *)hep->hcpriv;
@@ -2002,13 +2004,14 @@ static void r8a66597_endpoint_disable(struct usb_hcd *hcd,
 		return;
 	pipenum = pipe->info.pipenum;
 
+	spin_lock_irqsave(&r8a66597->lock, flags);
 	if (pipenum == 0) {
 		kfree(hep->hcpriv);
 		hep->hcpriv = NULL;
+		spin_unlock_irqrestore(&r8a66597->lock, flags);
 		return;
 	}
 
-	spin_lock_irqsave(&r8a66597->lock, flags);
 	pipe_stop(r8a66597, pipe);
 	pipe_irq_disable(r8a66597, pipenum);
 	disable_irq_empty(r8a66597, pipenum);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 5d21cd8359d4..421825b44202 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1329,7 +1329,8 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 		portsc_buf[port_index] = 0;
 
 		/* Bail out if a USB3 port has a new device in link training */
-		if ((t1 & PORT_PLS_MASK) == XDEV_POLLING) {
+		if ((hcd->speed >= HCD_USB3) &&
+		    (t1 & PORT_PLS_MASK) == XDEV_POLLING) {
 			bus_state->bus_suspended = 0;
 			spin_unlock_irqrestore(&xhci->lock, flags);
 			xhci_dbg(xhci, "Bus suspend bailout, port in polling\n");
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 2b81939fecd7..7bc2c9fef605 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1163,6 +1163,10 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, 0x1900),				/* Telit LN940 (QMI) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff),	/* Telit LN940 (MBIM) */
+	  .driver_info = NCTRL(0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) },
@@ -1327,6 +1331,7 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x0602, 0xff) },	/* GosunCn ZTE WeLink ME3630 (MBIM mode) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
@@ -1530,6 +1535,7 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff),  /* Telewell TW-LTE 4G v2 */
 	  .driver_info = RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1476, 0xff) },	/* GosunCn ZTE WeLink ME3630 (ECM/NCM mode) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },
@@ -1757,6 +1763,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E),
 	  .driver_info = RSVD(5) | RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) },	/* Simcom SIM7500/SIM7600 MBIM mode */
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
 	  .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),
@@ -1941,7 +1948,18 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) },	/* HP lt2523 (Novatel E371) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x10) },	/* HP lt4132 (Huawei ME906s-158) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x12) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) },
+	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 */
+	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
+	{ USB_DEVICE(0x2cb7, 0x0104),						/* Fibocom NL678 series */
+	  .driver_info = RSVD(4) | RSVD(5) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff),			/* Fibocom NL678 series */
+	  .driver_info = RSVD(6) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 3da25ad267a2..4966768d3c98 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -86,9 +86,14 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
 	{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LM920_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LM940_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_TD620_PRODUCT_ID) },
 	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
 	{ USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) },
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 123289085ee2..a84f0959ab34 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -123,10 +123,15 @@
 
 /* Hewlett-Packard POS Pole Displays */
 #define HP_VENDOR_ID		0x03f0
+#define HP_LM920_PRODUCT_ID	0x026b
+#define HP_TD620_PRODUCT_ID	0x0956
 #define HP_LD960_PRODUCT_ID	0x0b39
 #define HP_LCM220_PRODUCT_ID	0x3139
 #define HP_LCM960_PRODUCT_ID	0x3239
 #define HP_LD220_PRODUCT_ID	0x3524
+#define HP_LD220TA_PRODUCT_ID	0x4349
+#define HP_LD960TA_PRODUCT_ID	0x4439
+#define HP_LM940_PRODUCT_ID	0x5039
 
 /* Cressi Edy (diving computer) PC interface */
 #define CRESSI_VENDOR_ID	0x04b8