Merge 4.4.187 into android-4.4-p

Changes in 4.4.187
	MIPS: ath79: fix ar933x uart parity mode
	MIPS: fix build on non-linux hosts
	dmaengine: imx-sdma: fix use-after-free on probe error path
	ath10k: Do not send probe response template for mesh
	ath9k: Check for errors when reading SREV register
	ath6kl: add some bounds checking
	ath: DFS JP domain W56 fixed pulse type 3 RADAR detection
	batman-adv: fix for leaked TVLV handler.
	media: dvb: usb: fix use after free in dvb_usb_device_exit
	crypto: talitos - fix skcipher failure due to wrong output IV
	media: marvell-ccic: fix DMA s/g desc number calculation
	media: vpss: fix a potential NULL pointer dereference
	net: stmmac: dwmac1000: Clear unused address entries
	signal/pid_namespace: Fix reboot_pid_ns to use send_sig not force_sig
	af_key: fix leaks in key_pol_get_resp and dump_sp.
	xfrm: Fix xfrm sel prefix length validation
	media: staging: media: davinci_vpfe: - Fix for memory leak if decoder initialization fails.
	net: phy: Check against net_device being NULL
	tua6100: Avoid build warnings.
	locking/lockdep: Fix merging of hlocks with non-zero references
	media: wl128x: Fix some error handling in fm_v4l2_init_video_device()
	cpupower : frequency-set -r option misses the last cpu in related cpu list
	net: fec: Do not use netdev messages too early
	net: axienet: Fix race condition causing TX hang
	s390/qdio: handle PENDING state for QEBSM devices
	perf test 6: Fix missing kvm module load for s390
	gpio: omap: fix lack of irqstatus_raw0 for OMAP4
	gpio: omap: ensure irq is enabled before wakeup
	regmap: fix bulk writes on paged registers
	bpf: silence warning messages in core
	rcu: Force inlining of rcu_read_lock()
	xfrm: fix sa selector validation
	perf evsel: Make perf_evsel__name() accept a NULL argument
	vhost_net: disable zerocopy by default
	EDAC/sysfs: Fix memory leak when creating a csrow object
	media: i2c: fix warning same module names
	ntp: Limit TAI-UTC offset
	timer_list: Guard procfs specific code
	acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
	media: coda: fix mpeg2 sequence number handling
	media: coda: increment sequence offset for the last returned frame
	mt7601u: do not schedule rx_tasklet when the device has been disconnected
	x86/build: Add 'set -e' to mkcapflags.sh to delete broken capflags.c
	mt7601u: fix possible memory leak when the device is disconnected
	ath10k: fix PCIE device wake up failed
	rslib: Fix decoding of shortened codes
	rslib: Fix handling of of caller provided syndrome
	ixgbe: Check DDM existence in transceiver before access
	EDAC: Fix global-out-of-bounds write when setting edac_mc_poll_msec
	bcache: check c->gc_thread by IS_ERR_OR_NULL in cache_set_flush()
	Bluetooth: hci_bcsp: Fix memory leak in rx_skb
	Bluetooth: 6lowpan: search for destination address in all peers
	Bluetooth: Check state in l2cap_disconnect_rsp
	Bluetooth: validate BLE connection interval updates
	crypto: ghash - fix unaligned memory access in ghash_setkey()
	crypto: arm64/sha1-ce - correct digest for empty data in finup
	crypto: arm64/sha2-ce - correct digest for empty data in finup
	Input: gtco - bounds check collection indent level
	regulator: s2mps11: Fix buck7 and buck8 wrong voltages
	tracing/snapshot: Resize spare buffer if size changed
	NFSv4: Handle the special Linux file open access mode
	lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
	ALSA: seq: Break too long mutex context in the write loop
	media: v4l2: Test type instead of cfg->type in v4l2_ctrl_new_custom()
	media: coda: Remove unbalanced and unneeded mutex unlock
	KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed
	drm/nouveau/i2c: Enable i2c pads & busses during preinit
	padata: use smp_mb in padata_reorder to avoid orphaned padata jobs
	9p/virtio: Add cleanup path in p9_virtio_init
	PCI: Do not poll for PME if the device is in D3cold
	take floppy compat ioctls to sodding floppy.c
	floppy: fix div-by-zero in setup_format_params
	floppy: fix out-of-bounds read in next_valid_format
	floppy: fix invalid pointer dereference in drive_name
	floppy: fix out-of-bounds read in copy_buffer
	coda: pass the host file in vma->vm_file on mmap
	gpu: ipu-v3: ipu-ic: Fix saturation bit offset in TPMEM
	parisc: Fix kernel panic due invalid values in IAOQ0 or IAOQ1
	powerpc/32s: fix suspend/resume when IBATs 4-7 are used
	powerpc/watchpoint: Restore NV GPRs while returning from exception
	eCryptfs: fix a couple type promotion bugs
	intel_th: msu: Fix single mode with disabled IOMMU
	Bluetooth: Add SMP workaround Microsoft Surface Precision Mouse bug
	usb: Handle USB3 remote wakeup for LPM enabled devices correctly
	dm bufio: fix deadlock with loop device
	bnx2x: Prevent load reordering in tx completion processing
	caif-hsi: fix possible deadlock in cfhsi_exit_module()
	ipv4: don't set IPv6 only flags to IPv4 addresses
	net: bcmgenet: use promisc for unsupported filters
	net: neigh: fix multiple neigh timer scheduling
	nfc: fix potential illegal memory access
	sky2: Disable MSI on ASUS P6T
	netrom: fix a memory leak in nr_rx_frame()
	netrom: hold sock when setting skb->destructor
	tcp: Reset bytes_acked and bytes_received when disconnecting
	bonding: validate ip header before check IPPROTO_IGMP
	net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling
	net: bridge: mcast: fix stale ipv6 hdr pointer when handling v6 query
	net: bridge: stp: don't cache eth dest pointer before skb pull
	elevator: fix truncation of icq_cache_name
	NFSv4: Fix open create exclusive when the server reboots
	nfsd: increase DRC cache limit
	nfsd: give out fewer session slots as limit approaches
	nfsd: fix performance-limiting session calculation
	nfsd: Fix overflow causing non-working mounts on 1 TB machines
	drm/panel: simple: Fix panel_simple_dsi_probe
	usb: core: hub: Disable hub-initiated U1/U2
	tty: max310x: Fix invalid baudrate divisors calculator
	pinctrl: rockchip: fix leaked of_node references
	tty: serial: cpm_uart - fix init when SMC is relocated
	memstick: Fix error cleanup path of memstick_init
	tty/serial: digicolor: Fix digicolor-usart already registered warning
	tty: serial: msm_serial: avoid system lockup condition
	drm/virtio: Add memory barriers for capset cache.
	phy: renesas: rcar-gen2: Fix memory leak at error paths
	usb: gadget: Zero ffs_io_data
	powerpc/pci/of: Fix OF flags parsing for 64bit BARs
	PCI: sysfs: Ignore lockdep for remove attribute
	iio: iio-utils: Fix possible incorrect mask calculation
	recordmcount: Fix spurious mcount entries on powerpc
	mfd: core: Set fwnode for created devices
	mfd: arizona: Fix undefined behavior
	um: Silence lockdep complaint about mmap_sem
	powerpc/4xx/uic: clear pending interrupt after irq type/pol change
	serial: sh-sci: Fix TX DMA buffer flushing and workqueue races
	kallsyms: exclude kasan local symbols on s390
	perf test mmap-thread-lookup: Initialize variable to suppress memory sanitizer warning
	f2fs: avoid out-of-range memory access
	mailbox: handle failed named mailbox channel request
	powerpc/eeh: Handle hugepages in ioremap space
	sh: prevent warnings when using iounmap
	mm/kmemleak.c: fix check for softirq context
	9p: pass the correct prototype to read_cache_page
	mm/mmu_notifier: use hlist_add_head_rcu()
	locking/lockdep: Fix lock used or unused stats error
	locking/lockdep: Hide unused 'class' variable
	usb: wusbcore: fix unbalanced get/put cluster_id
	usb: pci-quirks: Correct AMD PLL quirk detection
	x86/sysfb_efi: Add quirks for some devices with swapped width and height
	x86/speculation/mds: Apply more accurate check on hypervisor platform
	hpet: Fix division by zero in hpet_time_div()
	ALSA: line6: Fix wrong altsetting for LINE6_PODHD500_1
	ALSA: hda - Add a conexant codec entry to let mute led work
	powerpc/tm: Fix oops on sigreturn on systems without TM
	access: avoid the RCU grace period for the temporary subjective credentials
	vmstat: Remove BUG_ON from vmstat_update
	mm, vmstat: make quiet_vmstat lighter
	ipv6: check sk sk_type and protocol early in ip_mroute_set/getsockopt
	tcp: reset sk_send_head in tcp_write_queue_purge
	ISDN: hfcsusb: checking idx of ep configuration
	media: cpia2_usb: first wake up, then free in disconnect
	media: radio-raremono: change devm_k*alloc to k*alloc
	Bluetooth: hci_uart: check for missing tty operations
	sched/fair: Don't free p->numa_faults with concurrent readers
	drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl
	ceph: hold i_ceph_lock when removing caps for freeing inode
	Linux 4.4.187

Change-Id: I6086b23376cdf9f6a905f727fb07175a7ebdd356
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

5 files changed, 66 insertions, 34 deletions

diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 0040c29f651a..b9e137c03fe3 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -421,7 +421,16 @@ static int cpm_uart_startup(struct uart_port *port)
 			clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX);
 		}
 		cpm_uart_initbd(pinfo);
-		cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
+		if (IS_SMC(pinfo)) {
+			out_be32(&pinfo->smcup->smc_rstate, 0);
+			out_be32(&pinfo->smcup->smc_tstate, 0);
+			out_be16(&pinfo->smcup->smc_rbptr,
+				 in_be16(&pinfo->smcup->smc_rbase));
+			out_be16(&pinfo->smcup->smc_tbptr,
+				 in_be16(&pinfo->smcup->smc_tbase));
+		} else {
+			cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
+		}
 	}
 	/* Install interrupt handler. */
 	retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port);
@@ -875,16 +884,14 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
 	         (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);
 
 /*
- *  In case SMC1 is being relocated...
+ *  In case SMC is being relocated...
  */
-#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
 	out_be16(&up->smc_rbptr, in_be16(&pinfo->smcup->smc_rbase));
 	out_be16(&up->smc_tbptr, in_be16(&pinfo->smcup->smc_tbase));
 	out_be32(&up->smc_rstate, 0);
 	out_be32(&up->smc_tstate, 0);
 	out_be16(&up->smc_brkcr, 1);              /* number of break chars */
 	out_be16(&up->smc_brkec, 0);
-#endif
 
 	/* Set up the uart parameters in the
 	 * parameter ram.
@@ -898,8 +905,6 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
 	out_be16(&up->smc_brkec, 0);
 	out_be16(&up->smc_brkcr, 1);
 
-	cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
-
 	/* Set UART mode, 8 bit, no parity, one stop.
 	 * Enable receive and transmit.
 	 */
diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c
index a80cdad114f3..d8cb94997487 100644
--- a/drivers/tty/serial/digicolor-usart.c
+++ b/drivers/tty/serial/digicolor-usart.c
@@ -544,7 +544,11 @@ static int __init digicolor_uart_init(void)
 	if (ret)
 		return ret;
 
-	return platform_driver_register(&digicolor_uart_platform);
+	ret = platform_driver_register(&digicolor_uart_platform);
+	if (ret)
+		uart_unregister_driver(&digicolor_uart);
+
+	return ret;
 }
 module_init(digicolor_uart_init);
 
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 0ac0c618954e..a66fb7afecc7 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -486,37 +486,48 @@ static bool max310x_reg_precious(struct device *dev, unsigned int reg)
 
 static int max310x_set_baud(struct uart_port *port, int baud)
 {
-	unsigned int mode = 0, clk = port->uartclk, div = clk / baud;
+	unsigned int mode = 0, div = 0, frac = 0, c = 0, F = 0;
 
-	/* Check for minimal value for divider */
-	if (div < 16)
-		div = 16;
-
-	if (clk % baud && (div / 16) < 0x8000) {
+	/*
+	 * Calculate the integer divisor first. Select a proper mode
+	 * in case if the requested baud is too high for the pre-defined
+	 * clocks frequency.
+	 */
+	div = port->uartclk / baud;
+	if (div < 8) {
+		/* Mode x4 */
+		c = 4;
+		mode = MAX310X_BRGCFG_4XMODE_BIT;
+	} else if (div < 16) {
 		/* Mode x2 */
+		c = 8;
 		mode = MAX310X_BRGCFG_2XMODE_BIT;
-		clk = port->uartclk * 2;
-		div = clk / baud;
-
-		if (clk % baud && (div / 16) < 0x8000) {
-			/* Mode x4 */
-			mode = MAX310X_BRGCFG_4XMODE_BIT;
-			clk = port->uartclk * 4;
-			div = clk / baud;
-		}
+	} else {
+		c = 16;
 	}
 
-	max310x_port_write(port, MAX310X_BRGDIVMSB_REG, (div / 16) >> 8);
-	max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div / 16);
-	max310x_port_write(port, MAX310X_BRGCFG_REG, (div % 16) | mode);
+	/* Calculate the divisor in accordance with the fraction coefficient */
+	div /= c;
+	F = c*baud;
+
+	/* Calculate the baud rate fraction */
+	if (div > 0)
+		frac = (16*(port->uartclk % F)) / F;
+	else
+		div = 1;
+
+	max310x_port_write(port, MAX310X_BRGDIVMSB_REG, div >> 8);
+	max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div);
+	max310x_port_write(port, MAX310X_BRGCFG_REG, frac | mode);
 
-	return DIV_ROUND_CLOSEST(clk, div);
+	/* Return the actual baud rate we just programmed */
+	return (16*port->uartclk) / (c*(16*div + frac));
 }
 
 static int max310x_update_best_err(unsigned long f, long *besterr)
 {
 	/* Use baudrate 115200 for calculate error */
-	long err = f % (115200 * 16);
+	long err = f % (460800 * 16);
 
 	if ((*besterr < 0) || (*besterr > err)) {
 		*besterr = err;
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 5f0ded6fc4e9..eaeb098b5d6a 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -222,10 +222,14 @@ no_rx:
 
 static inline void msm_wait_for_xmitr(struct uart_port *port)
 {
+	unsigned int timeout = 500000;
+
 	while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) {
 		if (msm_read(port, UART_ISR) & UART_ISR_TX_READY)
 			break;
 		udelay(1);
+		if (!timeout--)
+			break;
 	}
 	msm_write(port, UART_CR_CMD_RESET_TX_READY, UART_CR);
 }
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 669134e27ed9..c450e32c153d 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1203,6 +1203,7 @@ static void work_fn_tx(struct work_struct *work)
 	struct uart_port *port = &s->port;
 	struct circ_buf *xmit = &port->state->xmit;
 	dma_addr_t buf;
+	int head, tail;
 
 	/*
 	 * DMA is idle now.
@@ -1212,16 +1213,23 @@ static void work_fn_tx(struct work_struct *work)
 	 * consistent xmit buffer state.
 	 */
 	spin_lock_irq(&port->lock);
-	buf = s->tx_dma_addr + (xmit->tail & (UART_XMIT_SIZE - 1));
+	head = xmit->head;
+	tail = xmit->tail;
+	buf = s->tx_dma_addr + (tail & (UART_XMIT_SIZE - 1));
 	s->tx_dma_len = min_t(unsigned int,
-		CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
-		CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
-	spin_unlock_irq(&port->lock);
+		CIRC_CNT(head, tail, UART_XMIT_SIZE),
+		CIRC_CNT_TO_END(head, tail, UART_XMIT_SIZE));
+	if (!s->tx_dma_len) {
+		/* Transmit buffer has been flushed */
+		spin_unlock_irq(&port->lock);
+		return;
+	}
 
 	desc = dmaengine_prep_slave_single(chan, buf, s->tx_dma_len,
 					   DMA_MEM_TO_DEV,
 					   DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
+		spin_unlock_irq(&port->lock);
 		dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n");
 		/* switch to PIO */
 		sci_tx_dma_release(s, true);
@@ -1231,20 +1239,20 @@ static void work_fn_tx(struct work_struct *work)
 	dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len,
 				   DMA_TO_DEVICE);
 
-	spin_lock_irq(&port->lock);
 	desc->callback = sci_dma_tx_complete;
 	desc->callback_param = s;
-	spin_unlock_irq(&port->lock);
 	s->cookie_tx = dmaengine_submit(desc);
 	if (dma_submit_error(s->cookie_tx)) {
+		spin_unlock_irq(&port->lock);
 		dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
 		/* switch to PIO */
 		sci_tx_dma_release(s, true);
 		return;
 	}
 
+	spin_unlock_irq(&port->lock);
 	dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
-		__func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
+		__func__, xmit->buf, tail, head, s->cookie_tx);
 
 	dma_async_issue_pending(chan);
 }