Merge 4.4.300 into android-4.4-p

Changes in 4.4.300
	Bluetooth: bfusb: fix division by zero in send path
	USB: core: Fix bug in resuming hub's handling of wakeup requests
	USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status
	mfd: intel-lpss: Fix too early PM enablement in the ACPI ->probe()
	can: gs_usb: fix use of uninitialized variable, detach device on reception of invalid USB data
	can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved}
	drm/i915: Avoid bitwise vs logical OR warning in snb_wm_latency_quirk()
	media: uvcvideo: fix division by zero at stream start
	rtlwifi: rtl8192cu: Fix WARNING when calling local_irq_restore() with interrupts enabled
	HID: uhid: Fix worker destroying device without any protection
	nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
	rtc: cmos: take rtc_lock while reading from CMOS
	media: mceusb: fix control-message timeouts
	media: em28xx: fix control-message timeouts
	media: dib0700: fix undefined behavior in tuner shutdown
	media: pvrusb2: fix control-message timeouts
	media: stk1160: fix control-message timeouts
	can: softing_cs: softingcs_probe(): fix memleak on registration failure
	PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
	Bluetooth: cmtp: fix possible panic when cmtp_init_sockets() fails
	Bluetooth: stop proccessing malicious adv data
	crypto: qce - fix uaf on qce_ahash_register_one
	tty: serial: atmel: Check return code of dmaengine_submit()
	tty: serial: atmel: Call dma_async_issue_pending()
	netfilter: bridge: add support for pppoe filtering
	arm64: dts: qcom: msm8916: fix MMC controller aliases
	drm/amdgpu: Fix a NULL pointer dereference in amdgpu_connector_lcd_native_mode()
	serial: amba-pl011: do not request memory region twice
	floppy: Fix hang in watchdog when disk is ejected
	media: dib8000: Fix a memleak in dib8000_init()
	media: saa7146: mxb: Fix a NULL pointer dereference in mxb_attach()
	media: msi001: fix possible null-ptr-deref in msi001_probe()
	usb: ftdi-elan: fix memory leak on device disconnect
	pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in __nonstatic_find_io_region()
	pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in nonstatic_find_mem_region()
	ppp: ensure minimum packet size in ppp_write()
	spi: spi-meson-spifc: Add missing pm_runtime_disable() in meson_spifc_probe
	can: softing: softing_startstop(): fix set but not used variable warning
	can: xilinx_can: xcan_probe(): check for error irq
	pcmcia: fix setting of kthread task states
	net: mcs7830: handle usb read errors properly
	ext4: avoid trim error on fs with small groups
	ALSA: jack: Add missing rwsem around snd_ctl_remove() calls
	ALSA: PCM: Add missing rwsem around snd_ctl_remove() calls
	ALSA: hda: Add missing rwsem around snd_ctl_remove() calls
	powerpc/prom_init: Fix improper check of prom_getprop()
	ALSA: oss: fix compile error when OSS_DEBUG is enabled
	char/mwave: Adjust io port register size
	RDMA/core: Let ib_find_gid() continue search even after empty entry
	dmaengine: pxa/mmp: stop referencing config->slave_id
	ASoC: samsung: idma: Check of ioremap return value
	misc: lattice-ecp3-config: Fix task hung when firmware load failed
	mips: lantiq: add support for clk_set_parent()
	mips: bcm63xx: add support for clk_set_parent()
	RDMA/cxgb4: Set queue pair state when being queried
	Bluetooth: Fix debugfs entry leak in hci_register_dev()
	fs: dlm: filter user dlm messages for kernel locks
	ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START reply
	usb: gadget: f_fs: Use stream_open() for endpoint files
	media: b2c2: Add missing check in flexcop_pci_isr:
	HSI: core: Fix return freed object in hsi_new_client
	mwifiex: Fix skb_over_panic in mwifiex_usb_recv()
	floppy: Add max size check for user space request
	media: saa7146: hexium_orion: Fix a NULL pointer dereference in hexium_attach()
	media: m920x: don't use stack on USB reads
	iwlwifi: mvm: synchronize with FW after multicast commands
	net: bonding: debug: avoid printing debug logs when bond is not notifying peers
	media: igorplugusb: receiver overflow should be reported
	media: saa7146: hexium_gemini: Fix a NULL pointer dereference in hexium_attach()
	usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0
	ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream
	um: registers: Rename function names to avoid conflicts and build problems
	ACPICA: Utilities: Avoid deleting the same object twice in a row
	ACPICA: Executer: Fix the REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()
	btrfs: remove BUG_ON() in find_parent_nodes()
	btrfs: remove BUG_ON(!eie) in find_parent_nodes
	net: mdio: Demote probed message to debug print
	dm btree: add a defensive bounds check to insert_at()
	dm space map common: add bounds check to sm_ll_lookup_bitmap()
	serial: pl010: Drop CR register reset on set_termios
	serial: core: Keep mctrl register state and cached copy in sync
	parisc: Avoid calling faulthandler_disabled() twice
	powerpc/6xx: add missing of_node_put
	powerpc/powernv: add missing of_node_put
	powerpc/cell: add missing of_node_put
	powerpc/btext: add missing of_node_put
	i2c: i801: Don't silently correct invalid transfer size
	powerpc/smp: Move setup_profiling_timer() under CONFIG_PROFILING
	i2c: mpc: Correct I2C reset procedure
	w1: Misuse of get_user()/put_user() reported by sparse
	ALSA: seq: Set upper limit of processed events
	i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
	MIPS: Octeon: Fix build errors using clang
	scsi: sr: Don't use GFP_DMA
	power: bq25890: Enable continuous conversion for ADC at charging
	ubifs: Error path in ubifs_remount_rw() seems to wrongly free write buffers
	ext4: set csum seed in tmp inode while migrating to extents
	ext4: Fix BUG_ON in ext4_bread when write quota data
	ext4: don't use the orphan list when migrating an inode
	powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
	net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
	parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries
	af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress
	net: axienet: Wait for PhyRstCmplt after core reset
	net: axienet: fix number of TX ring slots for available check
	netns: add schedule point in ops_exit_list()
	dmaengine: at_xdmac: Don't start transactions at tx_submit level
	dmaengine: at_xdmac: Print debug message after realeasing the lock
	dmaengine: at_xdmac: Fix lld view setting
	dmaengine: at_xdmac: Fix at_xdmac_lld struct definition
	net_sched: restore "mpu xxx" handling
	bcmgenet: add WOL IRQ check
	lib82596: Fix IRQ check in sni_82596_probe
	Linux 4.4.300

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ic6c59dd0f4ed703fff49584b3774d39e4548af4a

4 files changed, 19 insertions, 28 deletions

diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 5d41d5b92619..7f4ba9273966 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -465,14 +465,11 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
 	if ((termios->c_cflag & CREAD) == 0)
 		uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
 
-	/* first, disable everything */
 	old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
 
 	if (UART_ENABLE_MS(port, termios->c_cflag))
 		old_cr |= UART010_CR_MSIE;
 
-	writel(0, uap->port.membase + UART010_CR);
-
 	/* Set baud rate */
 	quot -= 1;
 	writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index ecace294dc7e..75932d68a722 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1945,31 +1945,12 @@ static const char *pl011_type(struct uart_port *port)
 }
 
 /*
- * Release the memory region(s) being used by 'port'
- */
-static void pl011_release_port(struct uart_port *port)
-{
-	release_mem_region(port->mapbase, SZ_4K);
-}
-
-/*
- * Request the memory region(s) being used by 'port'
- */
-static int pl011_request_port(struct uart_port *port)
-{
-	return request_mem_region(port->mapbase, SZ_4K, "uart-pl011")
-			!= NULL ? 0 : -EBUSY;
-}
-
-/*
  * Configure/autoconfigure the port.
  */
 static void pl011_config_port(struct uart_port *port, int flags)
 {
-	if (flags & UART_CONFIG_TYPE) {
+	if (flags & UART_CONFIG_TYPE)
 		port->type = PORT_AMBA;
-		pl011_request_port(port);
-	}
 }
 
 /*
@@ -1984,6 +1965,8 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
 		ret = -EINVAL;
 	if (ser->baud_base < 9600)
 		ret = -EINVAL;
+	if (port->mapbase != (unsigned long) ser->iomem_base)
+		ret = -EINVAL;
 	return ret;
 }
 
@@ -2001,8 +1984,6 @@ static struct uart_ops amba_pl011_pops = {
 	.flush_buffer	= pl011_dma_flush_buffer,
 	.set_termios	= pl011_set_termios,
 	.type		= pl011_type,
-	.release_port	= pl011_release_port,
-	.request_port	= pl011_request_port,
 	.config_port	= pl011_config_port,
 	.verify_port	= pl011_verify_port,
 #ifdef CONFIG_CONSOLE_POLL
@@ -2032,8 +2013,6 @@ static const struct uart_ops sbsa_uart_pops = {
 	.shutdown	= sbsa_uart_shutdown,
 	.set_termios	= sbsa_uart_set_termios,
 	.type		= pl011_type,
-	.release_port	= pl011_release_port,
-	.request_port	= pl011_request_port,
 	.config_port	= pl011_config_port,
 	.verify_port	= pl011_verify_port,
 #ifdef CONFIG_CONSOLE_POLL
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 3bd19de7df71..e49493703179 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -928,6 +928,13 @@ static void atmel_tx_dma(struct uart_port *port)
 		desc->callback = atmel_complete_tx_dma;
 		desc->callback_param = atmel_port;
 		atmel_port->cookie_tx = dmaengine_submit(desc);
+		if (dma_submit_error(atmel_port->cookie_tx)) {
+			dev_err(port->dev, "dma_submit_error %d\n",
+				atmel_port->cookie_tx);
+			return;
+		}
+
+		dma_async_issue_pending(chan);
 	}
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -1186,6 +1193,13 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
 	desc->callback_param = port;
 	atmel_port->desc_rx = desc;
 	atmel_port->cookie_rx = dmaengine_submit(desc);
+	if (dma_submit_error(atmel_port->cookie_rx)) {
+		dev_err(port->dev, "dma_submit_error %d\n",
+			atmel_port->cookie_rx);
+		goto chan_err;
+	}
+
+	dma_async_issue_pending(atmel_port->chan_rx);
 
 	return 0;
 
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 99122059c750..d8dffcb6f5be 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2250,7 +2250,8 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 		 * We probably don't need a spinlock around this, but
 		 */
 		spin_lock_irqsave(&port->lock, flags);
-		port->ops->set_mctrl(port, port->mctrl & TIOCM_DTR);
+		port->mctrl &= TIOCM_DTR;
+		port->ops->set_mctrl(port, port->mctrl);
 		spin_unlock_irqrestore(&port->lock, flags);
 
 		/*