Merge 4.4.92 into android-4.4

Changes in 4.4.92
	usb: gadget: inode.c: fix unbalanced spin_lock in ep0_write
	USB: gadgetfs: Fix crash caused by inadequate synchronization
	USB: gadgetfs: fix copy_to_user while holding spinlock
	usb: gadget: udc: atmel: set vbus irqflags explicitly
	usb-storage: unusual_devs entry to fix write-access regression for Seagate external drives
	usb: renesas_usbhs: fix the BCLR setting condition for non-DCP pipe
	usb: renesas_usbhs: fix usbhsf_fifo_clear() for RX direction
	ALSA: usb-audio: Check out-of-bounds access by corrupted buffer descriptor
	usb: pci-quirks.c: Corrected timeout values used in handshake
	USB: dummy-hcd: fix connection failures (wrong speed)
	USB: dummy-hcd: fix infinite-loop resubmission bug
	USB: dummy-hcd: Fix erroneous synchronization change
	USB: devio: Don't corrupt user memory
	usb: gadget: mass_storage: set msg_registered after msg registered
	USB: g_mass_storage: Fix deadlock when driver is unbound
	lsm: fix smack_inode_removexattr and xattr_getsecurity memleak
	ALSA: compress: Remove unused variable
	ALSA: usx2y: Suppress kernel warning at page allocation failures
	driver core: platform: Don't read past the end of "driver_override" buffer
	Drivers: hv: fcopy: restore correct transfer length
	stm class: Fix a use-after-free
	ftrace: Fix kmemleak in unregister_ftrace_graph
	HID: i2c-hid: allocate hid buffers for real worst case
	iwlwifi: add workaround to disable wide channels in 5GHz
	scsi: sd: Do not override max_sectors_kb sysfs setting
	USB: uas: fix bug in handling of alternate settings
	USB: core: harden cdc_parse_cdc_header
	usb: Increase quirk delay for USB devices
	USB: fix out-of-bounds in usb_set_configuration
	xhci: fix finding correct bus_state structure for USB 3.1 hosts
	iio: adc: twl4030: Fix an error handling path in 'twl4030_madc_probe()'
	iio: adc: twl4030: Disable the vusb3v1 rugulator in the error handling path of 'twl4030_madc_probe()'
	iio: ad_sigma_delta: Implement a dedicated reset function
	staging: iio: ad7192: Fix - use the dedicated reset function avoiding dma from stack.
	iio: core: Return error for failed read_reg
	iio: ad7793: Fix the serial interface reset
	iio: adc: mcp320x: Fix readout of negative voltages
	iio: adc: mcp320x: Fix oops on module unload
	uwb: properly check kthread_run return value
	uwb: ensure that endpoint is interrupt
	brcmfmac: setup passive scan if requested by user-space
	drm/i915/bios: ignore HDMI on port A
	nvme: protect against simultaneous shutdown invocations
	sched/cpuset/pm: Fix cpuset vs. suspend-resume bugs
	ext4: fix data corruption for mmap writes
	ext4: Don't clear SGID when inheriting ACLs
	ext4: don't allow encrypted operations without keys
	Linux 4.4.92

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

4 files changed, 71 insertions, 27 deletions

diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index c2ea4e5666fb..9710cf71054a 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1990,6 +1990,10 @@ int cdc_parse_cdc_header(struct usb_cdc_parsed_header *hdr,
 			elength = 1;
 			goto next_desc;
 		}
+		if ((buflen < elength) || (elength < 3)) {
+			dev_err(&intf->dev, "invalid descriptor buffer length\n");
+			break;
+		}
 		if (buffer[1] != USB_DT_CS_INTERFACE) {
 			dev_err(&intf->dev, "skipping garbage\n");
 			goto next_desc;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
index da5826d788d6..f18491cf793c 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
@@ -876,7 +876,7 @@ static void brcmf_escan_prep(struct brcmf_cfg80211_info *cfg,
 
 	eth_broadcast_addr(params_le->bssid);
 	params_le->bss_type = DOT11_BSSTYPE_ANY;
-	params_le->scan_type = 0;
+	params_le->scan_type = BRCMF_SCANTYPE_ACTIVE;
 	params_le->channel_num = 0;
 	params_le->nprobes = cpu_to_le32(-1);
 	params_le->active_time = cpu_to_le32(-1);
@@ -884,12 +884,9 @@ static void brcmf_escan_prep(struct brcmf_cfg80211_info *cfg,
 	params_le->home_time = cpu_to_le32(-1);
 	memset(&params_le->ssid_le, 0, sizeof(params_le->ssid_le));
 
-	/* if request is null exit so it will be all channel broadcast scan */
-	if (!request)
-		return;
-
 	n_ssids = request->n_ssids;
 	n_channels = request->n_channels;
+
 	/* Copy channel array if applicable */
 	brcmf_dbg(SCAN, "### List of channelspecs to scan ### %d\n",
 		  n_channels);
@@ -926,16 +923,8 @@ static void brcmf_escan_prep(struct brcmf_cfg80211_info *cfg,
 			ptr += sizeof(ssid_le);
 		}
 	} else {
-		brcmf_dbg(SCAN, "Broadcast scan %p\n", request->ssids);
-		if ((request->ssids) && request->ssids->ssid_len) {
-			brcmf_dbg(SCAN, "SSID %s len=%d\n",
-				  params_le->ssid_le.SSID,
-				  request->ssids->ssid_len);
-			params_le->ssid_le.SSID_len =
-				cpu_to_le32(request->ssids->ssid_len);
-			memcpy(&params_le->ssid_le.SSID, request->ssids->ssid,
-				request->ssids->ssid_len);
-		}
+		brcmf_dbg(SCAN, "Performing passive scan\n");
+		params_le->scan_type = BRCMF_SCANTYPE_PASSIVE;
 	}
 	/* Adding mask to channel numbers */
 	params_le->channel_num =
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
index daa427b46712..4320c4cae53e 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
@@ -45,6 +45,11 @@
 #define BRCMF_SCAN_PARAMS_COUNT_MASK	0x0000ffff
 #define BRCMF_SCAN_PARAMS_NSSID_SHIFT	16
 
+/* scan type definitions */
+#define BRCMF_SCANTYPE_DEFAULT		0xFF
+#define BRCMF_SCANTYPE_ACTIVE		0
+#define BRCMF_SCANTYPE_PASSIVE		1
+
 /* primary (ie tx) key */
 #define BRCMF_PRIMARY_KEY		(1 << 1)
 #define DOT11_BSSTYPE_ANY		2
diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index d82984912e04..95b82cc132e6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -73,6 +73,7 @@
 /* NVM offsets (in words) definitions */
 enum wkp_nvm_offsets {
 	/* NVM HW-Section offset (in words) definitions */
+	SUBSYSTEM_ID = 0x0A,
 	HW_ADDR = 0x15,
 
 	/* NVM SW-Section offset (in words) definitions */
@@ -257,13 +258,12 @@ static u32 iwl_get_channel_flags(u8 ch_num, int ch_idx, bool is_5ghz,
 static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
 				struct iwl_nvm_data *data,
 				const __le16 * const nvm_ch_flags,
-				bool lar_supported)
+				bool lar_supported, bool no_wide_in_5ghz)
 {
 	int ch_idx;
 	int n_channels = 0;
 	struct ieee80211_channel *channel;
 	u16 ch_flags;
-	bool is_5ghz;
 	int num_of_ch, num_2ghz_channels;
 	const u8 *nvm_chan;
 
@@ -278,12 +278,20 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
 	}
 
 	for (ch_idx = 0; ch_idx < num_of_ch; ch_idx++) {
+		bool is_5ghz = (ch_idx >= num_2ghz_channels);
+
 		ch_flags = __le16_to_cpup(nvm_ch_flags + ch_idx);
 
-		if (ch_idx >= num_2ghz_channels &&
-		    !data->sku_cap_band_52GHz_enable)
+		if (is_5ghz && !data->sku_cap_band_52GHz_enable)
 			continue;
 
+		/* workaround to disable wide channels in 5GHz */
+		if (no_wide_in_5ghz && is_5ghz) {
+			ch_flags &= ~(NVM_CHANNEL_40MHZ |
+				     NVM_CHANNEL_80MHZ |
+				     NVM_CHANNEL_160MHZ);
+		}
+
 		if (!lar_supported && !(ch_flags & NVM_CHANNEL_VALID)) {
 			/*
 			 * Channels might become valid later if lar is
@@ -303,8 +311,8 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
 		n_channels++;
 
 		channel->hw_value = nvm_chan[ch_idx];
-		channel->band = (ch_idx < num_2ghz_channels) ?
-				IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
+		channel->band = is_5ghz ?
+				IEEE80211_BAND_5GHZ : IEEE80211_BAND_2GHZ;
 		channel->center_freq =
 			ieee80211_channel_to_frequency(
 				channel->hw_value, channel->band);
@@ -316,7 +324,6 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
 		 * is not used in mvm, and is used for backwards compatibility
 		 */
 		channel->max_power = IWL_DEFAULT_MAX_TX_POWER;
-		is_5ghz = channel->band == IEEE80211_BAND_5GHZ;
 
 		/* don't put limitations in case we're using LAR */
 		if (!lar_supported)
@@ -405,7 +412,8 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg,
 static void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg,
 			    struct iwl_nvm_data *data,
 			    const __le16 *ch_section,
-			    u8 tx_chains, u8 rx_chains, bool lar_supported)
+			    u8 tx_chains, u8 rx_chains, bool lar_supported,
+			    bool no_wide_in_5ghz)
 {
 	int n_channels;
 	int n_used = 0;
@@ -414,12 +422,14 @@ static void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg,
 	if (cfg->device_family != IWL_DEVICE_FAMILY_8000)
 		n_channels = iwl_init_channel_map(
 				dev, cfg, data,
-				&ch_section[NVM_CHANNELS], lar_supported);
+				&ch_section[NVM_CHANNELS], lar_supported,
+				no_wide_in_5ghz);
 	else
 		n_channels = iwl_init_channel_map(
 				dev, cfg, data,
 				&ch_section[NVM_CHANNELS_FAMILY_8000],
-				lar_supported);
+				lar_supported,
+				no_wide_in_5ghz);
 
 	sband = &data->bands[IEEE80211_BAND_2GHZ];
 	sband->band = IEEE80211_BAND_2GHZ;
@@ -582,6 +592,39 @@ static void iwl_set_hw_address_family_8000(struct device *dev,
 
 #define IWL_4165_DEVICE_ID 0x5501
 
+static bool
+iwl_nvm_no_wide_in_5ghz(struct device *dev, const struct iwl_cfg *cfg,
+			const __le16 *nvm_hw)
+{
+	/*
+	 * Workaround a bug in Indonesia SKUs where the regulatory in
+	 * some 7000-family OTPs erroneously allow wide channels in
+	 * 5GHz.  To check for Indonesia, we take the SKU value from
+	 * bits 1-4 in the subsystem ID and check if it is either 5 or
+	 * 9.  In those cases, we need to force-disable wide channels
+	 * in 5GHz otherwise the FW will throw a sysassert when we try
+	 * to use them.
+	 */
+	if (cfg->device_family == IWL_DEVICE_FAMILY_7000) {
+		/*
+		 * Unlike the other sections in the NVM, the hw
+		 * section uses big-endian.
+		 */
+		u16 subsystem_id = be16_to_cpup((const __be16 *)nvm_hw
+						+ SUBSYSTEM_ID);
+		u8 sku = (subsystem_id & 0x1e) >> 1;
+
+		if (sku == 5 || sku == 9) {
+			IWL_DEBUG_EEPROM(dev,
+					 "disabling wide channels in 5GHz (0x%0x %d)\n",
+					 subsystem_id, sku);
+			return true;
+		}
+	}
+
+	return false;
+}
+
 struct iwl_nvm_data *
 iwl_parse_nvm_data(struct device *dev, const struct iwl_cfg *cfg,
 		   const __le16 *nvm_hw, const __le16 *nvm_sw,
@@ -591,6 +634,7 @@ iwl_parse_nvm_data(struct device *dev, const struct iwl_cfg *cfg,
 		   u32 mac_addr0, u32 mac_addr1, u32 hw_id)
 {
 	struct iwl_nvm_data *data;
+	bool no_wide_in_5ghz = iwl_nvm_no_wide_in_5ghz(dev, cfg, nvm_hw);
 	u32 sku;
 	u32 radio_cfg;
 	u16 lar_config;
@@ -657,7 +701,8 @@ iwl_parse_nvm_data(struct device *dev, const struct iwl_cfg *cfg,
 		iwl_set_hw_address(cfg, data, nvm_hw);
 
 		iwl_init_sbands(dev, cfg, data, nvm_sw,
-				tx_chains, rx_chains, lar_fw_supported);
+				tx_chains, rx_chains, lar_fw_supported,
+				no_wide_in_5ghz);
 	} else {
 		u16 lar_offset = data->nvm_version < 0xE39 ?
 				 NVM_LAR_OFFSET_FAMILY_8000_OLD :
@@ -673,7 +718,8 @@ iwl_parse_nvm_data(struct device *dev, const struct iwl_cfg *cfg,
 
 		iwl_init_sbands(dev, cfg, data, regulatory,
 				tx_chains, rx_chains,
-				lar_fw_supported && data->lar_enabled);
+				lar_fw_supported && data->lar_enabled,
+				no_wide_in_5ghz);
 	}
 
 	data->calib_version = 255;