Merge android-4.4.98 (3d4af8) into msm-4.4

* refs/heads/tmp-03d4af8
  Linux 4.4.98
  PKCS#7: fix unitialized boolean 'want'
  x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context
  can: c_can: don't indicate triple sampling support for D_CAN
  can: sun4i: handle overrun in RX FIFO
  rbd: use GFP_NOIO for parent stat and data requests
  drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue
  Input: elan_i2c - add ELAN060C to the ACPI table
  MIPS: AR7: Ensure that serial ports are properly set up
  MIPS: AR7: Defer registration of GPIO
  tools: firmware: check for distro fallback udev cancel rule
  selftests: firmware: send expected errors to /dev/null
  selftests: firmware: add empty string and async tests
  test: firmware_class: report errors properly on failure
  MIPS: SMP: Fix deadlock & online race
  MIPS: Fix race on setting and getting cpu_online_mask
  MIPS: SMP: Use a completion event to signal CPU up
  MIPS: Fix CM region target definitions
  MIPS: microMIPS: Fix incorrect mask in insn_table_MM
  ALSA: seq: Avoid invalid lockdep class warning
  ALSA: seq: Fix OSS sysex delivery in OSS emulation
  ARM: 8720/1: ensure dump_instr() checks addr_limit
  KEYS: fix NULL pointer dereference during ASN.1 parsing [ver #2]
  crypto: x86/sha1-mb - fix panic due to unaligned access
  workqueue: Fix NULL pointer dereference
  x86/uaccess, sched/preempt: Verify access_ok() context
  platform/x86: hp-wmi: Do not shadow error values
  platform/x86: hp-wmi: Fix error value for hp_wmi_tablet_state
  KEYS: trusted: fix writing past end of buffer in trusted_read()
  KEYS: trusted: sanitize all key material
  cdc_ncm: Set NTB format again after altsetting switch for Huawei devices
  platform/x86: hp-wmi: Fix detection for dock and tablet mode
  net: dsa: select NET_SWITCHDEV
  s390/qeth: issue STARTLAN as first IPA command
  IB/ipoib: Change list_del to list_del_init in the tx object
  Input: mpr121 - set missing event capability
  Input: mpr121 - handle multiple bits change of status register
  IPsec: do not ignore crypto err in ah4 input
  netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev family
  usb: hcd: initialize hcd->flags to 0 when rm hcd
  serial: sh-sci: Fix register offsets for the IRDA serial port
  phy: increase size of MII_BUS_ID_SIZE and bus_id
  iio: trigger: free trigger resource correctly
  crypto: vmx - disable preemption to enable vsx in aes_ctr.c
  ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
  powerpc/corenet: explicitly disable the SDHC controller on kmcoge4
  iommu/arm-smmu-v3: Clear prior settings when updating STEs
  KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counter
  drm: drm_minor_register(): Clean up debugfs on failure
  xen/netback: set default upper limit of tx/rx queues to 8
  PCI: mvebu: Handle changes to the bridge windows while enabled
  video: fbdev: pmag-ba-fb: Remove bad `__init' annotation
  adv7604: Initialize drive strength to default when using DT
  ANDROID: binder: clarify deferred thread work.
  FROMLIST: arm64: Avoid aligning normal memory pointers in __memcpy_{to,from}io

Conflicts:
	arch/arm64/kernel/io.c

Change-Id: I992fcf368dbc672ad7d6ae31e87f289f4d7df2bf
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>

6 files changed, 48 insertions, 6 deletions

diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c
index cf7c18947189..d065c0e2d18e 100644
--- a/drivers/net/can/c_can/c_can_pci.c
+++ b/drivers/net/can/c_can/c_can_pci.c
@@ -178,7 +178,6 @@ static int c_can_pci_probe(struct pci_dev *pdev,
 		break;
 	case BOSCH_D_CAN:
 		priv->regs = reg_map_d_can;
-		priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
 		break;
 	default:
 		ret = -EINVAL;
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index e36d10520e24..717530eac70c 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -320,7 +320,6 @@ static int c_can_plat_probe(struct platform_device *pdev)
 		break;
 	case BOSCH_D_CAN:
 		priv->regs = reg_map_d_can;
-		priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
 		priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
 		priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
 		priv->read_reg32 = d_can_plat_read_reg32;
diff --git a/drivers/net/can/sun4i_can.c b/drivers/net/can/sun4i_can.c
index b0c80859f746..1ac2090a1721 100644
--- a/drivers/net/can/sun4i_can.c
+++ b/drivers/net/can/sun4i_can.c
@@ -539,6 +539,13 @@ static int sun4i_can_err(struct net_device *dev, u8 isrc, u8 status)
 		}
 		stats->rx_over_errors++;
 		stats->rx_errors++;
+
+		/* reset the CAN IP by entering reset mode
+		 * ignoring timeout error
+		 */
+		set_reset_mode(dev);
+		set_normal_mode(dev);
+
 		/* clear bit */
 		sun4i_can_write_cmdreg(priv, SUN4I_CMD_CLEAR_OR_FLAG);
 	}
@@ -653,8 +660,9 @@ static irqreturn_t sun4i_can_interrupt(int irq, void *dev_id)
 			netif_wake_queue(dev);
 			can_led_event(dev, CAN_LED_EVENT_TX);
 		}
-		if (isrc & SUN4I_INT_RBUF_VLD) {
-			/* receive interrupt */
+		if ((isrc & SUN4I_INT_RBUF_VLD) &&
+		    !(isrc & SUN4I_INT_DATA_OR)) {
+			/* receive interrupt - don't read if overrun occurred */
 			while (status & SUN4I_STA_RBUF_RDY) {
 				/* RX buffer is not empty */
 				sun4i_can_rx(dev);
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index e0e94b855bbe..1228d0da4075 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -724,8 +724,10 @@ int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_
 	u8 *buf;
 	int len;
 	int temp;
+	int err;
 	u8 iface_no;
 	struct usb_cdc_parsed_header hdr;
+	u16 curr_ntb_format;
 
 	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
@@ -823,6 +825,32 @@ int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_
 		goto error2;
 	}
 
+	/*
+	 * Some Huawei devices have been observed to come out of reset in NDP32 mode.
+	 * Let's check if this is the case, and set the device to NDP16 mode again if
+	 * needed.
+	*/
+	if (ctx->drvflags & CDC_NCM_FLAG_RESET_NTB16) {
+		err = usbnet_read_cmd(dev, USB_CDC_GET_NTB_FORMAT,
+				      USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
+				      0, iface_no, &curr_ntb_format, 2);
+		if (err < 0) {
+			goto error2;
+		}
+
+		if (curr_ntb_format == USB_CDC_NCM_NTB32_FORMAT) {
+			dev_info(&intf->dev, "resetting NTB format to 16-bit");
+			err = usbnet_write_cmd(dev, USB_CDC_SET_NTB_FORMAT,
+					       USB_TYPE_CLASS | USB_DIR_OUT
+					       | USB_RECIP_INTERFACE,
+					       USB_CDC_NCM_NTB16_FORMAT,
+					       iface_no, NULL, 0);
+
+			if (err < 0)
+				goto error2;
+		}
+	}
+
 	cdc_ncm_find_endpoints(dev, ctx->data);
 	cdc_ncm_find_endpoints(dev, ctx->control);
 	if (!dev->in || !dev->out || !dev->status) {
diff --git a/drivers/net/usb/huawei_cdc_ncm.c b/drivers/net/usb/huawei_cdc_ncm.c
index 2680a65cd5e4..63f28908afda 100644
--- a/drivers/net/usb/huawei_cdc_ncm.c
+++ b/drivers/net/usb/huawei_cdc_ncm.c
@@ -80,6 +80,12 @@ static int huawei_cdc_ncm_bind(struct usbnet *usbnet_dev,
 	 * be at the end of the frame.
 	 */
 	drvflags |= CDC_NCM_FLAG_NDP_TO_END;
+
+	/* Additionally, it has been reported that some Huawei E3372H devices, with
+	 * firmware version 21.318.01.00.541, come out of reset in NTB32 format mode, hence
+	 * needing to be set to the NTB16 one again.
+	 */
+	drvflags |= CDC_NCM_FLAG_RESET_NTB16;
 	ret = cdc_ncm_bind_common(usbnet_dev, intf, 1, drvflags);
 	if (ret)
 		goto err;
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 72ee1c305cc4..02db20b26749 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -67,6 +67,7 @@ module_param(rx_drain_timeout_msecs, uint, 0444);
 unsigned int rx_stall_timeout_msecs = 60000;
 module_param(rx_stall_timeout_msecs, uint, 0444);
 
+#define MAX_QUEUES_DEFAULT 8
 unsigned int xenvif_max_queues;
 module_param_named(max_queues, xenvif_max_queues, uint, 0644);
 MODULE_PARM_DESC(max_queues,
@@ -2157,11 +2158,12 @@ static int __init netback_init(void)
 	if (!xen_domain())
 		return -ENODEV;
 
-	/* Allow as many queues as there are CPUs if user has not
+	/* Allow as many queues as there are CPUs but max. 8 if user has not
 	 * specified a value.
 	 */
 	if (xenvif_max_queues == 0)
-		xenvif_max_queues = num_online_cpus();
+		xenvif_max_queues = min_t(unsigned int, MAX_QUEUES_DEFAULT,
+					  num_online_cpus());
 
 	if (fatal_skb_slots < XEN_NETBK_LEGACY_SLOTS_MAX) {
 		pr_info("fatal_skb_slots too small (%d), bump it to XEN_NETBK_LEGACY_SLOTS_MAX (%d)\n",