Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) BPF debugger and asm tool by Daniel Borkmann.

 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.

 3) Correct reciprocal_divide and update users, from Hannes Frederic
    Sowa and Daniel Borkmann.

 4) Currently we only have a "set" operation for the hw timestamp socket
    ioctl, add a "get" operation to match.  From Ben Hutchings.

 5) Add better trace events for debugging driver datapath problems, also
    from Ben Hutchings.

 6) Implement auto corking in TCP, from Eric Dumazet.  Basically, if we
    have a small send and a previous packet is already in the qdisc or
    device queue, defer until TX completion or we get more data.

 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.

 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
    Borkmann.

 9) Share IP header compression code between Bluetooth and IEEE802154
    layers, from Jukka Rissanen.

10) Fix ipv6 router reachability probing, from Jiri Benc.

11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.

12) Support tunneling in GRO layer, from Jerry Chu.

13) Allow bonding to be configured fully using netlink, from Scott
    Feldman.

14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
    already get the TCI.  From Atzm Watanabe.

15) New "Heavy Hitter" qdisc, from Terry Lam.

16) Significantly improve the IPSEC support in pktgen, from Fan Du.

17) Allow ipv4 tunnels to cache routes, just like sockets.  From Tom
    Herbert.

18) Add Proportional Integral Enhanced packet scheduler, from Vijay
    Subramanian.

19) Allow openvswitch to mmap'd netlink, from Thomas Graf.

20) Key TCP metrics blobs also by source address, not just destination
    address.  From Christoph Paasch.

21) Support 10G in generic phylib.  From Andy Fleming.

22) Try to short-circuit GRO flow compares using device provided RX
    hash, if provided.  From Tom Herbert.

The wireless and netfilter folks have been busy little bees too.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
  net/cxgb4: Fix referencing freed adapter
  ipv6: reallocate addrconf router for ipv6 address when lo device up
  fib_frontend: fix possible NULL pointer dereference
  rtnetlink: remove IFLA_BOND_SLAVE definition
  rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
  qlcnic: update version to 5.3.55
  qlcnic: Enhance logic to calculate msix vectors.
  qlcnic: Refactor interrupt coalescing code for all adapters.
  qlcnic: Update poll controller code path
  qlcnic: Interrupt code cleanup
  qlcnic: Enhance Tx timeout debugging.
  qlcnic: Use bool for rx_mac_learn.
  bonding: fix u64 division
  rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
  sfc: Use the correct maximum TX DMA ring size for SFC9100
  Add Shradha Shah as the sfc driver maintainer.
  net/vxlan: Share RX skb de-marking and checksum checks with ovs
  tulip: cleanup by using ARRAY_SIZE()
  ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
  net/cxgb4: Don't retrieve stats during recovery
  ...

1 files changed, 263 insertions, 325 deletions

diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index 81c88dd606dc..1b3230fa3651 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ * Copyright (c) 2013 Qualcomm Atheros, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -14,409 +14,347 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include <linux/export.h>
 #include "ath9k.h"
-#include "reg.h"
-#include "hw-ops.h"
 
-const char *ath9k_hw_wow_event_to_string(u32 wow_event)
-{
-	if (wow_event & AH_WOW_MAGIC_PATTERN_EN)
-		return "Magic pattern";
-	if (wow_event & AH_WOW_USER_PATTERN_EN)
-		return "User pattern";
-	if (wow_event & AH_WOW_LINK_CHANGE)
-		return "Link change";
-	if (wow_event & AH_WOW_BEACON_MISS)
-		return "Beacon miss";
-
-	return  "unknown reason";
-}
-EXPORT_SYMBOL(ath9k_hw_wow_event_to_string);
+static const struct wiphy_wowlan_support ath9k_wowlan_support = {
+	.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT,
+	.n_patterns = MAX_NUM_USER_PATTERN,
+	.pattern_min_len = 1,
+	.pattern_max_len = MAX_PATTERN_SIZE,
+};
 
-static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah)
+static void ath9k_wow_map_triggers(struct ath_softc *sc,
+				   struct cfg80211_wowlan *wowlan,
+				   u32 *wow_triggers)
 {
-	struct ath_common *common = ath9k_hw_common(ah);
+	if (wowlan->disconnect)
+		*wow_triggers |= AH_WOW_LINK_CHANGE |
+				 AH_WOW_BEACON_MISS;
+	if (wowlan->magic_pkt)
+		*wow_triggers |= AH_WOW_MAGIC_PATTERN_EN;
 
-	REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
+	if (wowlan->n_patterns)
+		*wow_triggers |= AH_WOW_USER_PATTERN_EN;
 
-	/* set rx disable bit */
-	REG_WRITE(ah, AR_CR, AR_CR_RXD);
-
-	if (!ath9k_hw_wait(ah, AR_CR, AR_CR_RXE, 0, AH_WAIT_TIMEOUT)) {
-		ath_err(common, "Failed to stop Rx DMA in 10ms AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
-			REG_READ(ah, AR_CR), REG_READ(ah, AR_DIAG_SW));
-		return;
-	}
+	sc->wow_enabled = *wow_triggers;
 
-	REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_ON_INT);
 }
 
-static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah)
+static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
 {
+	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
-	u8 sta_mac_addr[ETH_ALEN], ap_mac_addr[ETH_ALEN];
-	u32 ctl[13] = {0};
-	u32 data_word[KAL_NUM_DATA_WORDS];
-	u8 i;
-	u32 wow_ka_data_word0;
-
-	memcpy(sta_mac_addr, common->macaddr, ETH_ALEN);
-	memcpy(ap_mac_addr, common->curbssid, ETH_ALEN);
-
-	/* set the transmit buffer */
-	ctl[0] = (KAL_FRAME_LEN | (MAX_RATE_POWER << 16));
-	ctl[1] = 0;
-	ctl[3] = 0xb;	/* OFDM_6M hardware value for this rate */
-	ctl[4] = 0;
-	ctl[7] = (ah->txchainmask) << 2;
-	ctl[2] = 0xf << 16; /* tx_tries 0 */
-
-	for (i = 0; i < KAL_NUM_DESC_WORDS; i++)
-		REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
-
-	REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
-
-	data_word[0] = (KAL_FRAME_TYPE << 2) | (KAL_FRAME_SUB_TYPE << 4) |
-		       (KAL_TO_DS << 8) | (KAL_DURATION_ID << 16);
-	data_word[1] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
-		       (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
-	data_word[2] = (sta_mac_addr[1] << 24) | (sta_mac_addr[0] << 16) |
-		       (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
-	data_word[3] = (sta_mac_addr[5] << 24) | (sta_mac_addr[4] << 16) |
-		       (sta_mac_addr[3] << 8) | (sta_mac_addr[2]);
-	data_word[4] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
-		       (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
-	data_word[5] = (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
-
-	if (AR_SREV_9462_20(ah)) {
-		/* AR9462 2.0 has an extra descriptor word (time based
-		 * discard) compared to other chips */
-		REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + (12 * 4)), 0);
-		wow_ka_data_word0 = AR_WOW_TXBUF(13);
-	} else {
-		wow_ka_data_word0 = AR_WOW_TXBUF(12);
-	}
-
-	for (i = 0; i < KAL_NUM_DATA_WORDS; i++)
-		REG_WRITE(ah, (wow_ka_data_word0 + i*4), data_word[i]);
-
-}
-
-void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
-				u8 *user_mask, int pattern_count,
-				int pattern_len)
-{
-	int i;
-	u32 pattern_val, mask_val;
-	u32 set, clr;
+	int pattern_count = 0;
+	int i, byte_cnt;
+	u8 dis_deauth_pattern[MAX_PATTERN_SIZE];
+	u8 dis_deauth_mask[MAX_PATTERN_SIZE];
 
-	/* FIXME: should check count by querying the hardware capability */
-	if (pattern_count >= MAX_NUM_PATTERN)
-		return;
-
-	REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count));
-
-	/* set the registers for pattern */
-	for (i = 0; i < MAX_PATTERN_SIZE; i += 4) {
-		memcpy(&pattern_val, user_pattern, 4);
-		REG_WRITE(ah, (AR_WOW_TB_PATTERN(pattern_count) + i),
-			  pattern_val);
-		user_pattern += 4;
-	}
-
-	/* set the registers for mask */
-	for (i = 0; i < MAX_PATTERN_MASK_SIZE; i += 4) {
-		memcpy(&mask_val, user_mask, 4);
-		REG_WRITE(ah, (AR_WOW_TB_MASK(pattern_count) + i), mask_val);
-		user_mask += 4;
-	}
+	memset(dis_deauth_pattern, 0, MAX_PATTERN_SIZE);
+	memset(dis_deauth_mask, 0, MAX_PATTERN_SIZE);
 
-	/* set the pattern length to be matched
+	/*
+	 * Create Dissassociate / Deauthenticate packet filter
+	 *
+	 *     2 bytes        2 byte    6 bytes   6 bytes  6 bytes
+	 *  +--------------+----------+---------+--------+--------+----
+	 *  + Frame Control+ Duration +   DA    +  SA    +  BSSID +
+	 *  +--------------+----------+---------+--------+--------+----
 	 *
-	 * AR_WOW_LENGTH1_REG1
-	 * bit 31:24 pattern 0 length
-	 * bit 23:16 pattern 1 length
-	 * bit 15:8 pattern 2 length
-	 * bit 7:0 pattern 3 length
+	 * The above is the management frame format for disassociate/
+	 * deauthenticate pattern, from this we need to match the first byte
+	 * of 'Frame Control' and DA, SA, and BSSID fields
+	 * (skipping 2nd byte of FC and Duration feild.
 	 *
-	 * AR_WOW_LENGTH1_REG2
-	 * bit 31:24 pattern 4 length
-	 * bit 23:16 pattern 5 length
-	 * bit 15:8 pattern 6 length
-	 * bit 7:0 pattern 7 length
+	 * Disassociate pattern
+	 * --------------------
+	 * Frame control = 00 00 1010
+	 * DA, SA, BSSID = x:x:x:x:x:x
+	 * Pattern will be A0000000 | x:x:x:x:x:x | x:x:x:x:x:x
+	 *			    | x:x:x:x:x:x  -- 22 bytes
 	 *
-	 * the below logic writes out the new
-	 * pattern length for the corresponding
-	 * pattern_count, while masking out the
-	 * other fields
+	 * Deauthenticate pattern
+	 * ----------------------
+	 * Frame control = 00 00 1100
+	 * DA, SA, BSSID = x:x:x:x:x:x
+	 * Pattern will be C0000000 | x:x:x:x:x:x | x:x:x:x:x:x
+	 *			    | x:x:x:x:x:x  -- 22 bytes
 	 */
 
-	ah->wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);
-
-	if (pattern_count < 4) {
-		/* Pattern 0-3 uses AR_WOW_LENGTH1 register */
-		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
-		       AR_WOW_LEN1_SHIFT(pattern_count);
-		clr = AR_WOW_LENGTH1_MASK(pattern_count);
-		REG_RMW(ah, AR_WOW_LENGTH1, set, clr);
-	} else {
-		/* Pattern 4-7 uses AR_WOW_LENGTH2 register */
-		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
-		       AR_WOW_LEN2_SHIFT(pattern_count);
-		clr = AR_WOW_LENGTH2_MASK(pattern_count);
-		REG_RMW(ah, AR_WOW_LENGTH2, set, clr);
-	}
+	/* Create Disassociate Pattern first */
 
-}
-EXPORT_SYMBOL(ath9k_hw_wow_apply_pattern);
+	byte_cnt = 0;
 
-u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
-{
-	u32 wow_status = 0;
-	u32 val = 0, rval;
+	/* Fill out the mask with all FF's */
 
-	/*
-	 * read the WoW status register to know
-	 * the wakeup reason
-	 */
-	rval = REG_READ(ah, AR_WOW_PATTERN);
-	val = AR_WOW_STATUS(rval);
+	for (i = 0; i < MAX_PATTERN_MASK_SIZE; i++)
+		dis_deauth_mask[i] = 0xff;
 
-	/*
-	 * mask only the WoW events that we have enabled. Sometimes
-	 * we have spurious WoW events from the AR_WOW_PATTERN
-	 * register. This mask will clean it up.
-	 */
+	/* copy the first byte of frame control field */
+	dis_deauth_pattern[byte_cnt] = 0xa0;
+	byte_cnt++;
 
-	val &= ah->wow_event_mask;
-
-	if (val) {
-		if (val & AR_WOW_MAGIC_PAT_FOUND)
-			wow_status |= AH_WOW_MAGIC_PATTERN_EN;
-		if (AR_WOW_PATTERN_FOUND(val))
-			wow_status |= AH_WOW_USER_PATTERN_EN;
-		if (val & AR_WOW_KEEP_ALIVE_FAIL)
-			wow_status |= AH_WOW_LINK_CHANGE;
-		if (val & AR_WOW_BEACON_FAIL)
-			wow_status |= AH_WOW_BEACON_MISS;
-	}
+	/* skip 2nd byte of frame control and Duration field */
+	byte_cnt += 3;
 
 	/*
-	 * set and clear WOW_PME_CLEAR registers for the chip to
-	 * generate next wow signal.
-	 * disable D3 before accessing other registers ?
+	 * need not match the destination mac address, it can be a broadcast
+	 * mac address or an unicast to this station
 	 */
+	byte_cnt += 6;
 
-	/* do we need to check the bit value 0x01000000 (7-10) ?? */
-	REG_RMW(ah, AR_PCIE_PM_CTRL, AR_PMCTRL_WOW_PME_CLR,
-		AR_PMCTRL_PWR_STATE_D1D3);
+	/* copy the source mac address */
+	memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
 
-	/*
-	 * clear all events
-	 */
-	REG_WRITE(ah, AR_WOW_PATTERN,
-		  AR_WOW_CLEAR_EVENTS(REG_READ(ah, AR_WOW_PATTERN)));
+	byte_cnt += 6;
 
-	/*
-	 * restore the beacon threshold to init value
-	 */
-	REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);
+	/* copy the bssid, its same as the source mac address */
+
+	memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
+
+	/* Create Disassociate pattern mask */
+
+	dis_deauth_mask[0] = 0xfe;
+	dis_deauth_mask[1] = 0x03;
+	dis_deauth_mask[2] = 0xc0;
+
+	ath_dbg(common, WOW, "Adding disassoc/deauth patterns for WoW\n");
 
+	ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
+				   pattern_count, byte_cnt);
+
+	pattern_count++;
 	/*
-	 * Restore the way the PCI-E reset, Power-On-Reset, external
-	 * PCIE_POR_SHORT pins are tied to its original value.
-	 * Previously just before WoW sleep, we untie the PCI-E
-	 * reset to our Chip's Power On Reset so that any PCI-E
-	 * reset from the bus will not reset our chip
+	 * for de-authenticate pattern, only the first byte of the frame
+	 * control field gets changed from 0xA0 to 0xC0
 	 */
-	if (ah->is_pciexpress)
-		ath9k_hw_configpcipowersave(ah, false);
+	dis_deauth_pattern[0] = 0xC0;
 
-	ah->wow_event_mask = 0;
+	ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
+				   pattern_count, byte_cnt);
 
-	return wow_status;
 }
-EXPORT_SYMBOL(ath9k_hw_wow_wakeup);
 
-void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
+static void ath9k_wow_add_pattern(struct ath_softc *sc,
+				  struct cfg80211_wowlan *wowlan)
 {
-	u32 wow_event_mask;
-	u32 set, clr;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath9k_wow_pattern *wow_pattern = NULL;
+	struct cfg80211_pkt_pattern *patterns = wowlan->patterns;
+	int mask_len;
+	s8 i = 0;
 
-	/*
-	 * wow_event_mask is a mask to the AR_WOW_PATTERN register to
-	 * indicate which WoW events we have enabled. The WoW events
-	 * are from the 'pattern_enable' in this function and
-	 * 'pattern_count' of ath9k_hw_wow_apply_pattern()
-	 */
-	wow_event_mask = ah->wow_event_mask;
+	if (!wowlan->n_patterns)
+		return;
 
 	/*
-	 * Untie Power-on-Reset from the PCI-E-Reset. When we are in
-	 * WOW sleep, we do want the Reset from the PCI-E to disturb
-	 * our hw state
+	 * Add the new user configured patterns
 	 */
-	if (ah->is_pciexpress) {
+	for (i = 0; i < wowlan->n_patterns; i++) {
+
+		wow_pattern = kzalloc(sizeof(*wow_pattern), GFP_KERNEL);
+
+		if (!wow_pattern)
+			return;
+
+		/*
+		 * TODO: convert the generic user space pattern to
+		 * appropriate chip specific/802.11 pattern.
+		 */
+
+		mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8);
+		memset(wow_pattern->pattern_bytes, 0, MAX_PATTERN_SIZE);
+		memset(wow_pattern->mask_bytes, 0, MAX_PATTERN_SIZE);
+		memcpy(wow_pattern->pattern_bytes, patterns[i].pattern,
+		       patterns[i].pattern_len);
+		memcpy(wow_pattern->mask_bytes, patterns[i].mask, mask_len);
+		wow_pattern->pattern_len = patterns[i].pattern_len;
+
 		/*
-		 * we need to untie the internal POR (power-on-reset)
-		 * to the external PCI-E reset. We also need to tie
-		 * the PCI-E Phy reset to the PCI-E reset.
+		 * just need to take care of deauth and disssoc pattern,
+		 * make sure we don't overwrite them.
 		 */
-		set = AR_WA_RESET_EN | AR_WA_POR_SHORT;
-		clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE;
-		REG_RMW(ah, AR_WA, set, clr);
+
+		ath9k_hw_wow_apply_pattern(ah, wow_pattern->pattern_bytes,
+					   wow_pattern->mask_bytes,
+					   i + 2,
+					   wow_pattern->pattern_len);
+		kfree(wow_pattern);
+
 	}
 
-	/*
-	 * set the power states appropriately and enable PME
-	 */
-	set = AR_PMCTRL_HOST_PME_EN | AR_PMCTRL_PWR_PM_CTRL_ENA |
-	      AR_PMCTRL_AUX_PWR_DET | AR_PMCTRL_WOW_PME_CLR;
+}
 
-	/*
-	 * set and clear WOW_PME_CLEAR registers for the chip
-	 * to generate next wow signal.
-	 */
-	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
-	clr = AR_PMCTRL_WOW_PME_CLR;
-	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+int ath9k_suspend(struct ieee80211_hw *hw,
+		  struct cfg80211_wowlan *wowlan)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+	u32 wow_triggers_enabled = 0;
+	int ret = 0;
 
-	/*
-	 * Setup for:
-	 *	- beacon misses
-	 *	- magic pattern
-	 *	- keep alive timeout
-	 *	- pattern matching
-	 */
+	mutex_lock(&sc->mutex);
 
-	/*
-	 * Program default values for pattern backoff, aifs/slot/KAL count,
-	 * beacon miss timeout, KAL timeout, etc.
-	 */
-	set = AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF);
-	REG_SET_BIT(ah, AR_WOW_PATTERN, set);
+	ath_cancel_work(sc);
+	ath_stop_ani(sc);
 
-	set = AR_WOW_AIFS_CNT(AR_WOW_CNT_AIFS_CNT) |
-	      AR_WOW_SLOT_CNT(AR_WOW_CNT_SLOT_CNT) |
-	      AR_WOW_KEEP_ALIVE_CNT(AR_WOW_CNT_KA_CNT);
-	REG_SET_BIT(ah, AR_WOW_COUNT, set);
+	if (test_bit(SC_OP_INVALID, &sc->sc_flags)) {
+		ath_dbg(common, ANY, "Device not present\n");
+		ret = -EINVAL;
+		goto fail_wow;
+	}
 
-	if (pattern_enable & AH_WOW_BEACON_MISS)
-		set = AR_WOW_BEACON_TIMO;
-	/* We are not using beacon miss, program a large value */
-	else
-		set = AR_WOW_BEACON_TIMO_MAX;
+	if (WARN_ON(!wowlan)) {
+		ath_dbg(common, WOW, "None of the WoW triggers enabled\n");
+		ret = -EINVAL;
+		goto fail_wow;
+	}
 
-	REG_WRITE(ah, AR_WOW_BCN_TIMO, set);
+	if (!device_can_wakeup(sc->dev)) {
+		ath_dbg(common, WOW, "device_can_wakeup failed, WoW is not enabled\n");
+		ret = 1;
+		goto fail_wow;
+	}
 
 	/*
-	 * Keep alive timo in ms except AR9280
+	 * none of the sta vifs are associated
+	 * and we are not currently handling multivif
+	 * cases, for instance we have to seperately
+	 * configure 'keep alive frame' for each
+	 * STA.
 	 */
-	if (!pattern_enable)
-		set = AR_WOW_KEEP_ALIVE_NEVER;
-	else
-		set = KAL_TIMEOUT * 32;
 
-	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, set);
+	if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
+		ath_dbg(common, WOW, "None of the STA vifs are associated\n");
+		ret = 1;
+		goto fail_wow;
+	}
+
+	if (sc->nvifs > 1) {
+		ath_dbg(common, WOW, "WoW for multivif is not yet supported\n");
+		ret = 1;
+		goto fail_wow;
+	}
+
+	ath9k_wow_map_triggers(sc, wowlan, &wow_triggers_enabled);
+
+	ath_dbg(common, WOW, "WoW triggers enabled 0x%x\n",
+		wow_triggers_enabled);
+
+	ath9k_ps_wakeup(sc);
+
+	ath9k_stop_btcoex(sc);
 
 	/*
-	 * Keep alive delay in us. based on 'power on clock',
-	 * therefore in usec
+	 * Enable wake up on recieving disassoc/deauth
+	 * frame by default.
 	 */
-	set = KAL_DELAY * 1000;
-	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_DELAY, set);
+	ath9k_wow_add_disassoc_deauth_pattern(sc);
+
+	if (wow_triggers_enabled & AH_WOW_USER_PATTERN_EN)
+		ath9k_wow_add_pattern(sc, wowlan);
 
+	spin_lock_bh(&sc->sc_pcu_lock);
 	/*
-	 * Create keep alive pattern to respond to beacons
+	 * To avoid false wake, we enable beacon miss interrupt only
+	 * when we go to sleep. We save the current interrupt mask
+	 * so we can restore it after the system wakes up
 	 */
-	ath9k_wow_create_keep_alive_pattern(ah);
+	sc->wow_intr_before_sleep = ah->imask;
+	ah->imask &= ~ATH9K_INT_GLOBAL;
+	ath9k_hw_disable_interrupts(ah);
+	ah->imask = ATH9K_INT_BMISS | ATH9K_INT_GLOBAL;
+	ath9k_hw_set_interrupts(ah);
+	ath9k_hw_enable_interrupts(ah);
+
+	spin_unlock_bh(&sc->sc_pcu_lock);
 
 	/*
-	 * Configure MAC WoW Registers
+	 * we can now sync irq and kill any running tasklets, since we already
+	 * disabled interrupts and not holding a spin lock
 	 */
-	set = 0;
-	/* Send keep alive timeouts anyway */
-	clr = AR_WOW_KEEP_ALIVE_AUTO_DIS;
+	synchronize_irq(sc->irq);
+	tasklet_kill(&sc->intr_tq);
 
-	if (pattern_enable & AH_WOW_LINK_CHANGE)
-		wow_event_mask |= AR_WOW_KEEP_ALIVE_FAIL;
-	else
-		set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
+	ath9k_hw_wow_enable(ah, wow_triggers_enabled);
 
-	set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
-	REG_RMW(ah, AR_WOW_KEEP_ALIVE, set, clr);
+	ath9k_ps_restore(sc);
+	ath_dbg(common, ANY, "WoW enabled in ath9k\n");
+	atomic_inc(&sc->wow_sleep_proc_intr);
 
-	/*
-	 * we are relying on a bmiss failure. ensure we have
-	 * enough threshold to prevent false positives
-	 */
-	REG_RMW_FIELD(ah, AR_RSSI_THR, AR_RSSI_THR_BM_THR,
-		      AR_WOW_BMISSTHRESHOLD);
+fail_wow:
+	mutex_unlock(&sc->mutex);
+	return ret;
+}
+
+int ath9k_resume(struct ieee80211_hw *hw)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+	u32 wow_status;
 
-	set = 0;
-	clr = 0;
+	mutex_lock(&sc->mutex);
 
-	if (pattern_enable & AH_WOW_BEACON_MISS) {
-		set = AR_WOW_BEACON_FAIL_EN;
-		wow_event_mask |= AR_WOW_BEACON_FAIL;
-	} else {
-		clr = AR_WOW_BEACON_FAIL_EN;
+	ath9k_ps_wakeup(sc);
+
+	spin_lock_bh(&sc->sc_pcu_lock);
+
+	ath9k_hw_disable_interrupts(ah);
+	ah->imask = sc->wow_intr_before_sleep;
+	ath9k_hw_set_interrupts(ah);
+	ath9k_hw_enable_interrupts(ah);
+
+	spin_unlock_bh(&sc->sc_pcu_lock);
+
+	wow_status = ath9k_hw_wow_wakeup(ah);
+
+	if (atomic_read(&sc->wow_got_bmiss_intr) == 0) {
+		/*
+		 * some devices may not pick beacon miss
+		 * as the reason they woke up so we add
+		 * that here for that shortcoming.
+		 */
+		wow_status |= AH_WOW_BEACON_MISS;
+		atomic_dec(&sc->wow_got_bmiss_intr);
+		ath_dbg(common, ANY, "Beacon miss interrupt picked up during WoW sleep\n");
 	}
 
-	REG_RMW(ah, AR_WOW_BCN_EN, set, clr);
+	atomic_dec(&sc->wow_sleep_proc_intr);
 
-	set = 0;
-	clr = 0;
-	/*
-	 * Enable the magic packet registers
-	 */
-	if (pattern_enable & AH_WOW_MAGIC_PATTERN_EN) {
-		set = AR_WOW_MAGIC_EN;
-		wow_event_mask |= AR_WOW_MAGIC_PAT_FOUND;
-	} else {
-		clr = AR_WOW_MAGIC_EN;
+	if (wow_status) {
+		ath_dbg(common, ANY, "Waking up due to WoW triggers %s with WoW status = %x\n",
+			ath9k_hw_wow_event_to_string(wow_status), wow_status);
 	}
-	set |= AR_WOW_MAC_INTR_EN;
-	REG_RMW(ah, AR_WOW_PATTERN, set, clr);
 
-	REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B,
-		  AR_WOW_PATTERN_SUPPORTED);
+	ath_restart_work(sc);
+	ath9k_start_btcoex(sc);
 
-	/*
-	 * Set the power states appropriately and enable PME
-	 */
-	clr = 0;
-	set = AR_PMCTRL_PWR_STATE_D1D3 | AR_PMCTRL_HOST_PME_EN |
-	      AR_PMCTRL_PWR_PM_CTRL_ENA;
+	ath9k_ps_restore(sc);
+	mutex_unlock(&sc->mutex);
 
-	clr = AR_PCIE_PM_CTRL_ENA;
-	REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr);
+	return 0;
+}
 
-	/*
-	 * this is needed to prevent the chip waking up
-	 * the host within 3-4 seconds with certain
-	 * platform/BIOS. The fix is to enable
-	 * D1 & D3 to match original definition and
-	 * also match the OTP value. Anyway this
-	 * is more related to SW WOW.
-	 */
-	clr = AR_PMCTRL_PWR_STATE_D1D3;
-	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled)
+{
+	struct ath_softc *sc = hw->priv;
 
-	set = AR_PMCTRL_PWR_STATE_D1D3_REAL;
-	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
+	mutex_lock(&sc->mutex);
+	device_init_wakeup(sc->dev, 1);
+	device_set_wakeup_enable(sc->dev, enabled);
+	mutex_unlock(&sc->mutex);
+}
 
-	REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);
+void ath9k_init_wow(struct ieee80211_hw *hw)
+{
+	struct ath_softc *sc = hw->priv;
 
-	/* to bring down WOW power low margin */
-	set = BIT(13);
-	REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set);
-	/* HW WoW */
-	clr = BIT(5);
-	REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr);
+	if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_WOW_DEVICE_CAPABLE) &&
+	    (sc->driver_data & ATH9K_PCI_WOW) &&
+	    device_can_wakeup(sc->dev))
+		hw->wiphy->wowlan = &ath9k_wowlan_support;
 
-	ath9k_hw_set_powermode_wow_sleep(ah);
-	ah->wow_event_mask = wow_event_mask;
+	atomic_set(&sc->wow_sleep_proc_intr, -1);
+	atomic_set(&sc->wow_got_bmiss_intr, -1);
 }
-EXPORT_SYMBOL(ath9k_hw_wow_enable);