Merge Linus master into drm-next

The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.

I've included the patch into the merge to fix the build.

Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 93 insertions, 57 deletions

diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
index 181b349b060e..f833b8bb6663 100644
--- a/drivers/net/ieee802154/cc2520.c
+++ b/drivers/net/ieee802154/cc2520.c
@@ -714,11 +714,45 @@ static irqreturn_t cc2520_sfd_isr(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static int cc2520_get_platform_data(struct spi_device *spi,
+				    struct cc2520_platform_data *pdata)
+{
+	struct device_node *np = spi->dev.of_node;
+	struct cc2520_private *priv = spi_get_drvdata(spi);
+
+	if (!np) {
+		struct cc2520_platform_data *spi_pdata = spi->dev.platform_data;
+		if (!spi_pdata)
+			return -ENOENT;
+		*pdata = *spi_pdata;
+		return 0;
+	}
+
+	pdata->fifo = of_get_named_gpio(np, "fifo-gpio", 0);
+	priv->fifo_pin = pdata->fifo;
+
+	pdata->fifop = of_get_named_gpio(np, "fifop-gpio", 0);
+
+	pdata->sfd = of_get_named_gpio(np, "sfd-gpio", 0);
+	pdata->cca = of_get_named_gpio(np, "cca-gpio", 0);
+	pdata->vreg = of_get_named_gpio(np, "vreg-gpio", 0);
+	pdata->reset = of_get_named_gpio(np, "reset-gpio", 0);
+
+	pdata->amplified = of_property_read_bool(np, "amplified");
+
+	return 0;
+}
+
 static int cc2520_hw_init(struct cc2520_private *priv)
 {
 	u8 status = 0, state = 0xff;
 	int ret;
 	int timeout = 100;
+	struct cc2520_platform_data pdata;
+
+	ret = cc2520_get_platform_data(priv->spi, &pdata);
+	if (ret)
+		goto err_ret;
 
 	ret = cc2520_read_register(priv, CC2520_FSMSTAT1, &state);
 	if (ret)
@@ -741,11 +775,47 @@ static int cc2520_hw_init(struct cc2520_private *priv)
 
 	dev_vdbg(&priv->spi->dev, "oscillator brought up\n");
 
-	/* Registers default value: section 28.1 in Datasheet */
-	ret = cc2520_write_register(priv, CC2520_TXPOWER, 0xF7);
-	if (ret)
-		goto err_ret;
+	/* If the CC2520 is connected to a CC2591 amplifier, we must both
+	 * configure GPIOs on the CC2520 to correctly configure the CC2591
+	 * and change a couple settings of the CC2520 to work with the
+	 * amplifier. See section 8 page 17 of TI application note AN065.
+	 * http://www.ti.com/lit/an/swra229a/swra229a.pdf
+	 */
+	if (pdata.amplified) {
+		ret = cc2520_write_register(priv, CC2520_TXPOWER, 0xF9);
+		if (ret)
+			goto err_ret;
+
+		ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x16);
+		if (ret)
+			goto err_ret;
+
+		ret = cc2520_write_register(priv, CC2520_GPIOCTRL0, 0x46);
+		if (ret)
+			goto err_ret;
+
+		ret = cc2520_write_register(priv, CC2520_GPIOCTRL5, 0x47);
+		if (ret)
+			goto err_ret;
+
+		ret = cc2520_write_register(priv, CC2520_GPIOPOLARITY, 0x1e);
+		if (ret)
+			goto err_ret;
+
+		ret = cc2520_write_register(priv, CC2520_TXCTRL, 0xc1);
+		if (ret)
+			goto err_ret;
+	} else {
+		ret = cc2520_write_register(priv, CC2520_TXPOWER, 0xF7);
+		if (ret)
+			goto err_ret;
 
+		ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x11);
+		if (ret)
+			goto err_ret;
+	}
+
+	/* Registers default value: section 28.1 in Datasheet */
 	ret = cc2520_write_register(priv, CC2520_CCACTRL0, 0x1A);
 	if (ret)
 		goto err_ret;
@@ -770,10 +840,6 @@ static int cc2520_hw_init(struct cc2520_private *priv)
 	if (ret)
 		goto err_ret;
 
-	ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x11);
-	if (ret)
-		goto err_ret;
-
 	ret = cc2520_write_register(priv, CC2520_ADCTEST0, 0x10);
 	if (ret)
 		goto err_ret;
@@ -808,40 +874,10 @@ err_ret:
 	return ret;
 }
 
-static struct cc2520_platform_data *
-cc2520_get_platform_data(struct spi_device *spi)
-{
-	struct cc2520_platform_data *pdata;
-	struct device_node *np = spi->dev.of_node;
-	struct cc2520_private *priv = spi_get_drvdata(spi);
-
-	if (!np)
-		return spi->dev.platform_data;
-
-	pdata = devm_kzalloc(&spi->dev, sizeof(*pdata), GFP_KERNEL);
-	if (!pdata)
-		goto done;
-
-	pdata->fifo = of_get_named_gpio(np, "fifo-gpio", 0);
-	priv->fifo_pin = pdata->fifo;
-
-	pdata->fifop = of_get_named_gpio(np, "fifop-gpio", 0);
-
-	pdata->sfd = of_get_named_gpio(np, "sfd-gpio", 0);
-	pdata->cca = of_get_named_gpio(np, "cca-gpio", 0);
-	pdata->vreg = of_get_named_gpio(np, "vreg-gpio", 0);
-	pdata->reset = of_get_named_gpio(np, "reset-gpio", 0);
-
-	spi->dev.platform_data = pdata;
-
-done:
-	return pdata;
-}
-
 static int cc2520_probe(struct spi_device *spi)
 {
 	struct cc2520_private *priv;
-	struct cc2520_platform_data *pdata;
+	struct cc2520_platform_data pdata;
 	int ret;
 
 	priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
@@ -850,8 +886,8 @@ static int cc2520_probe(struct spi_device *spi)
 
 	spi_set_drvdata(spi, priv);
 
-	pdata = cc2520_get_platform_data(spi);
-	if (!pdata) {
+	ret = cc2520_get_platform_data(spi, &pdata);
+	if (ret < 0) {
 		dev_err(&spi->dev, "no platform data\n");
 		return -EINVAL;
 	}
@@ -869,76 +905,76 @@ static int cc2520_probe(struct spi_device *spi)
 	init_completion(&priv->tx_complete);
 
 	/* Request all the gpio's */
-	if (!gpio_is_valid(pdata->fifo)) {
+	if (!gpio_is_valid(pdata.fifo)) {
 		dev_err(&spi->dev, "fifo gpio is not valid\n");
 		ret = -EINVAL;
 		goto err_hw_init;
 	}
 
-	ret = devm_gpio_request_one(&spi->dev, pdata->fifo,
+	ret = devm_gpio_request_one(&spi->dev, pdata.fifo,
 				    GPIOF_IN, "fifo");
 	if (ret)
 		goto err_hw_init;
 
-	if (!gpio_is_valid(pdata->cca)) {
+	if (!gpio_is_valid(pdata.cca)) {
 		dev_err(&spi->dev, "cca gpio is not valid\n");
 		ret = -EINVAL;
 		goto err_hw_init;
 	}
 
-	ret = devm_gpio_request_one(&spi->dev, pdata->cca,
+	ret = devm_gpio_request_one(&spi->dev, pdata.cca,
 				    GPIOF_IN, "cca");
 	if (ret)
 		goto err_hw_init;
 
-	if (!gpio_is_valid(pdata->fifop)) {
+	if (!gpio_is_valid(pdata.fifop)) {
 		dev_err(&spi->dev, "fifop gpio is not valid\n");
 		ret = -EINVAL;
 		goto err_hw_init;
 	}
 
-	ret = devm_gpio_request_one(&spi->dev, pdata->fifop,
+	ret = devm_gpio_request_one(&spi->dev, pdata.fifop,
 				    GPIOF_IN, "fifop");
 	if (ret)
 		goto err_hw_init;
 
-	if (!gpio_is_valid(pdata->sfd)) {
+	if (!gpio_is_valid(pdata.sfd)) {
 		dev_err(&spi->dev, "sfd gpio is not valid\n");
 		ret = -EINVAL;
 		goto err_hw_init;
 	}
 
-	ret = devm_gpio_request_one(&spi->dev, pdata->sfd,
+	ret = devm_gpio_request_one(&spi->dev, pdata.sfd,
 				    GPIOF_IN, "sfd");
 	if (ret)
 		goto err_hw_init;
 
-	if (!gpio_is_valid(pdata->reset)) {
+	if (!gpio_is_valid(pdata.reset)) {
 		dev_err(&spi->dev, "reset gpio is not valid\n");
 		ret = -EINVAL;
 		goto err_hw_init;
 	}
 
-	ret = devm_gpio_request_one(&spi->dev, pdata->reset,
+	ret = devm_gpio_request_one(&spi->dev, pdata.reset,
 				    GPIOF_OUT_INIT_LOW, "reset");
 	if (ret)
 		goto err_hw_init;
 
-	if (!gpio_is_valid(pdata->vreg)) {
+	if (!gpio_is_valid(pdata.vreg)) {
 		dev_err(&spi->dev, "vreg gpio is not valid\n");
 		ret = -EINVAL;
 		goto err_hw_init;
 	}
 
-	ret = devm_gpio_request_one(&spi->dev, pdata->vreg,
+	ret = devm_gpio_request_one(&spi->dev, pdata.vreg,
 				    GPIOF_OUT_INIT_LOW, "vreg");
 	if (ret)
 		goto err_hw_init;
 
-	gpio_set_value(pdata->vreg, HIGH);
+	gpio_set_value(pdata.vreg, HIGH);
 	usleep_range(100, 150);
 
-	gpio_set_value(pdata->reset, HIGH);
+	gpio_set_value(pdata.reset, HIGH);
 	usleep_range(200, 250);
 
 	ret = cc2520_hw_init(priv);
@@ -947,7 +983,7 @@ static int cc2520_probe(struct spi_device *spi)
 
 	/* Set up fifop interrupt */
 	ret = devm_request_irq(&spi->dev,
-			       gpio_to_irq(pdata->fifop),
+			       gpio_to_irq(pdata.fifop),
 			       cc2520_fifop_isr,
 			       IRQF_TRIGGER_RISING,
 			       dev_name(&spi->dev),
@@ -959,7 +995,7 @@ static int cc2520_probe(struct spi_device *spi)
 
 	/* Set up sfd interrupt */
 	ret = devm_request_irq(&spi->dev,
-			       gpio_to_irq(pdata->sfd),
+			       gpio_to_irq(pdata.sfd),
 			       cc2520_sfd_isr,
 			       IRQF_TRIGGER_FALLING,
 			       dev_name(&spi->dev),