Merge Linus master into drm-next

The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.

I've included the patch into the merge to fix the build.

Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 12 insertions, 34 deletions

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 10ef8244a239..82f512d87cb8 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -416,7 +416,7 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
 			new_val |= ESDHC_VENDOR_SPEC_FRC_SDCLK_ON;
 		else
 			new_val &= ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON;
-			writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC);
+		writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC);
 		return;
 	case SDHCI_HOST_CONTROL2:
 		new_val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
@@ -864,6 +864,7 @@ static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
 #ifdef CONFIG_OF
 static int
 sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
+			 struct sdhci_host *host,
 			 struct esdhc_platform_data *boarddata)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -900,11 +901,14 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
 	if (of_property_read_u32(np, "fsl,delay-line", &boarddata->delay_line))
 		boarddata->delay_line = 0;
 
+	mmc_of_parse_voltage(np, &host->ocr_mask);
+
 	return 0;
 }
 #else
 static inline int
 sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
+			 struct sdhci_host *host,
 			 struct esdhc_platform_data *boarddata)
 {
 	return -ENODEV;
@@ -999,7 +1003,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 			host->ioaddr + ESDHC_TUNING_CTRL);
 
 	boarddata = &imx_data->boarddata;
-	if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
+	if (sdhci_esdhc_imx_probe_dt(pdev, host, boarddata) < 0) {
 		if (!host->mmc->parent->platform_data) {
 			dev_err(mmc_dev(host->mmc), "no board data!\n");
 			err = -EINVAL;
@@ -1009,40 +1013,9 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 					host->mmc->parent->platform_data);
 	}
 
-	/* write_protect */
-	if (boarddata->wp_type == ESDHC_WP_GPIO) {
-		err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio);
-		if (err) {
-			dev_err(mmc_dev(host->mmc),
-				"failed to request write-protect gpio!\n");
-			goto disable_clk;
-		}
-		host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
-	}
-
 	/* card_detect */
-	switch (boarddata->cd_type) {
-	case ESDHC_CD_GPIO:
-		err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0);
-		if (err) {
-			dev_err(mmc_dev(host->mmc),
-				"failed to request card-detect gpio!\n");
-			goto disable_clk;
-		}
-		/* fall through */
-
-	case ESDHC_CD_CONTROLLER:
-		/* we have a working card_detect back */
+	if (boarddata->cd_type == ESDHC_CD_CONTROLLER)
 		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
-		break;
-
-	case ESDHC_CD_PERMANENT:
-		host->mmc->caps |= MMC_CAP_NONREMOVABLE;
-		break;
-
-	case ESDHC_CD_NONE:
-		break;
-	}
 
 	switch (boarddata->max_bus_width) {
 	case 8:
@@ -1075,6 +1048,11 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
 	}
 
+	/* call to generic mmc_of_parse to support additional capabilities */
+	err = mmc_of_parse(host->mmc);
+	if (err)
+		goto disable_clk;
+
 	err = sdhci_add_host(host);
 	if (err)
 		goto disable_clk;