Merge Linus master into drm-next

The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.

I've included the patch into the merge to fix the build.

Signed-off-by: Dave Airlie <airlied@redhat.com>

7 files changed, 74 insertions, 35 deletions

diff --git a/arch/mips/netlogic/xlp/ahci-init-xlp2.c b/arch/mips/netlogic/xlp/ahci-init-xlp2.c
index c83dbf3689e2..7b066a44e679 100644
--- a/arch/mips/netlogic/xlp/ahci-init-xlp2.c
+++ b/arch/mips/netlogic/xlp/ahci-init-xlp2.c
@@ -203,6 +203,7 @@ static u8 read_phy_reg(u64 regbase, u32 addr, u32 physel)
 static void config_sata_phy(u64 regbase)
 {
 	u32 port, i, reg;
+	u8 val;
 
 	for (port = 0; port < 2; port++) {
 		for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++)
@@ -210,6 +211,18 @@ static void config_sata_phy(u64 regbase)
 
 		for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++)
 			write_phy_reg(regbase, reg, port, sata_phy_config2[i]);
+
+		/* Fix for PHY link up failures at lower temperatures */
+		write_phy_reg(regbase, 0x800F, port, 0x1f);
+
+		val = read_phy_reg(regbase, 0x0029, port);
+		write_phy_reg(regbase, 0x0029, port, val | (0x7 << 1));
+
+		val = read_phy_reg(regbase, 0x0056, port);
+		write_phy_reg(regbase, 0x0056, port, val & ~(1 << 3));
+
+		val = read_phy_reg(regbase, 0x0018, port);
+		write_phy_reg(regbase, 0x0018, port, val & ~(0x7 << 0));
 	}
 }
 
diff --git a/arch/mips/netlogic/xlp/ahci-init.c b/arch/mips/netlogic/xlp/ahci-init.c
index a9d0fae02103..92be1a3258b1 100644
--- a/arch/mips/netlogic/xlp/ahci-init.c
+++ b/arch/mips/netlogic/xlp/ahci-init.c
@@ -151,7 +151,7 @@ static void nlm_sata_firmware_init(int node)
 static int __init nlm_ahci_init(void)
 {
 	int node = 0;
-	int chip = read_c0_prid() & PRID_REV_MASK;
+	int chip = read_c0_prid() & PRID_IMP_MASK;
 
 	if (chip == PRID_IMP_NETLOGIC_XLP3XX)
 		nlm_sata_firmware_init(node);
diff --git a/arch/mips/netlogic/xlp/dt.c b/arch/mips/netlogic/xlp/dt.c
index 7cc46032b28e..a625bdb6d6aa 100644
--- a/arch/mips/netlogic/xlp/dt.c
+++ b/arch/mips/netlogic/xlp/dt.c
@@ -41,17 +41,21 @@
 
 #include <asm/prom.h>
 
-extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[],
-	__dtb_xlp_fvp_begin[], __dtb_xlp_gvp_begin[];
+extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[], __dtb_xlp_fvp_begin[],
+	__dtb_xlp_gvp_begin[], __dtb_xlp_rvp_begin[];
 static void *xlp_fdt_blob;
 
 void __init *xlp_dt_init(void *fdtp)
 {
 	if (!fdtp) {
 		switch (current_cpu_data.processor_id & PRID_IMP_MASK) {
+#ifdef CONFIG_DT_XLP_RVP
+		case PRID_IMP_NETLOGIC_XLP5XX:
+			fdtp = __dtb_xlp_rvp_begin;
+			break;
+#endif
 #ifdef CONFIG_DT_XLP_GVP
 		case PRID_IMP_NETLOGIC_XLP9XX:
-		case PRID_IMP_NETLOGIC_XLP5XX:
 			fdtp = __dtb_xlp_gvp_begin;
 			break;
 #endif
diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c
index bc24beb3a426..a8f4144a0297 100644
--- a/arch/mips/netlogic/xlp/nlm_hal.c
+++ b/arch/mips/netlogic/xlp/nlm_hal.c
@@ -71,10 +71,20 @@ static int xlp9xx_irq_to_irt(int irq)
 	switch (irq) {
 	case PIC_GPIO_IRQ:
 		return 12;
+	case PIC_I2C_0_IRQ:
+		return 125;
+	case PIC_I2C_1_IRQ:
+		return 126;
+	case PIC_I2C_2_IRQ:
+		return 127;
+	case PIC_I2C_3_IRQ:
+		return 128;
 	case PIC_9XX_XHCI_0_IRQ:
 		return 114;
 	case PIC_9XX_XHCI_1_IRQ:
 		return 115;
+	case PIC_9XX_XHCI_2_IRQ:
+		return 116;
 	case PIC_UART_0_IRQ:
 		return 133;
 	case PIC_UART_1_IRQ:
@@ -170,16 +180,23 @@ static int xlp_irq_to_irt(int irq)
 	}
 
 	if (devoff != 0) {
+		uint32_t val;
+
 		pcibase = nlm_pcicfg_base(devoff);
-		irt = nlm_read_reg(pcibase, XLP_PCI_IRTINFO_REG) & 0xffff;
-		/* HW weirdness, I2C IRT entry has to be fixed up */
-		switch (irq) {
-		case PIC_I2C_1_IRQ:
-			irt = irt + 1; break;
-		case PIC_I2C_2_IRQ:
-			irt = irt + 2; break;
-		case PIC_I2C_3_IRQ:
-			irt = irt + 3; break;
+		val = nlm_read_reg(pcibase, XLP_PCI_IRTINFO_REG);
+		if (val == 0xffffffff) {
+			irt = -1;
+		} else {
+			irt = val & 0xffff;
+			/* HW weirdness, I2C IRT entry has to be fixed up */
+			switch (irq) {
+			case PIC_I2C_1_IRQ:
+				irt = irt + 1; break;
+			case PIC_I2C_2_IRQ:
+				irt = irt + 2; break;
+			case PIC_I2C_3_IRQ:
+				irt = irt + 3; break;
+			}
 		}
 	} else if (irq >= PIC_PCIE_LINK_LEGACY_IRQ(0) &&
 			irq <= PIC_PCIE_LINK_LEGACY_IRQ(3)) {
@@ -325,7 +342,7 @@ static unsigned int nlm_xlp2_get_pic_frequency(int node)
 	/* Find the clock source PLL device for PIC */
 	if (cpu_xlp9xx) {
 		reg_select = nlm_read_sys_reg(clockbase,
-				SYS_9XX_CLK_DEV_SEL) & 0x3;
+				SYS_9XX_CLK_DEV_SEL_REG) & 0x3;
 		switch (reg_select) {
 		case 0:
 			ctrl_val0 = nlm_read_sys_reg(clockbase,
@@ -354,7 +371,7 @@ static unsigned int nlm_xlp2_get_pic_frequency(int node)
 		}
 	} else {
 		reg_select = (nlm_read_sys_reg(sysbase,
-					SYS_CLK_DEV_SEL) >> 22) & 0x3;
+					SYS_CLK_DEV_SEL_REG) >> 22) & 0x3;
 		switch (reg_select) {
 		case 0:
 			ctrl_val0 = nlm_read_sys_reg(sysbase,
@@ -410,7 +427,7 @@ static unsigned int nlm_xlp2_get_pic_frequency(int node)
 
 	fdiv = fdiv/(1 << 13);
 	pll_out_freq_num = ((ref_clk >> 1) * (6 + mdiv)) + fdiv;
-	pll_out_freq_den = (1 << vco_post_div) * pll_post_div * 3;
+	pll_out_freq_den = (1 << vco_post_div) * pll_post_div * ref_div;
 
 	if (pll_out_freq_den > 0)
 		do_div(pll_out_freq_num, pll_out_freq_den);
@@ -418,10 +435,10 @@ static unsigned int nlm_xlp2_get_pic_frequency(int node)
 	/* PIC post divider, which happens after PLL */
 	if (cpu_xlp9xx)
 		pic_div = nlm_read_sys_reg(clockbase,
-				SYS_9XX_CLK_DEV_DIV) & 0x3;
+				SYS_9XX_CLK_DEV_DIV_REG) & 0x3;
 	else
 		pic_div = (nlm_read_sys_reg(sysbase,
-					SYS_CLK_DEV_DIV) >> 22) & 0x3;
+					SYS_CLK_DEV_DIV_REG) >> 22) & 0x3;
 	do_div(pll_out_freq_num, 1 << pic_div);
 
 	return pll_out_freq_num;
@@ -442,19 +459,21 @@ unsigned int nlm_get_cpu_frequency(void)
 
 /*
  * Fills upto 8 pairs of entries containing the DRAM map of a node
- * if n < 0, get dram map for all nodes
+ * if node < 0, get dram map for all nodes
  */
-int xlp_get_dram_map(int n, uint64_t *dram_map)
+int nlm_get_dram_map(int node, uint64_t *dram_map, int nentries)
 {
 	uint64_t bridgebase, base, lim;
 	uint32_t val;
 	unsigned int barreg, limreg, xlatreg;
-	int i, node, rv;
+	int i, n, rv;
 
 	/* Look only at mapping on Node 0, we don't handle crazy configs */
 	bridgebase = nlm_get_bridge_regbase(0);
 	rv = 0;
 	for (i = 0; i < 8; i++) {
+		if (rv + 1 >= nentries)
+			break;
 		if (cpu_is_xlp9xx()) {
 			barreg = BRIDGE_9XX_DRAM_BAR(i);
 			limreg = BRIDGE_9XX_DRAM_LIMIT(i);
@@ -464,10 +483,10 @@ int xlp_get_dram_map(int n, uint64_t *dram_map)
 			limreg = BRIDGE_DRAM_LIMIT(i);
 			xlatreg = BRIDGE_DRAM_NODE_TRANSLN(i);
 		}
-		if (n >= 0) {
+		if (node >= 0) {
 			/* node specified, get node mapping of BAR */
 			val = nlm_read_bridge_reg(bridgebase, xlatreg);
-			node = (val >> 1) & 0x3;
+			n = (val >> 1) & 0x3;
 			if (n != node)
 				continue;
 		}
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index 4fdd9fd29d1d..f743fd9da323 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -51,7 +51,6 @@ uint64_t nlm_io_base;
 struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
 cpumask_t nlm_cpumask = CPU_MASK_CPU0;
 unsigned int nlm_threads_per_core;
-unsigned int xlp_cores_per_node;
 
 static void nlm_linux_exit(void)
 {
@@ -82,7 +81,7 @@ static void __init xlp_init_mem_from_bars(void)
 	uint64_t map[16];
 	int i, n;
 
-	n = xlp_get_dram_map(-1, map);	/* -1: info for all nodes */
+	n = nlm_get_dram_map(-1, map, ARRAY_SIZE(map));	/* -1 : all nodes */
 	for (i = 0; i < n; i += 2) {
 		/* exclude 0x1000_0000-0x2000_0000, u-boot device */
 		if (map[i] <= 0x10000000 && map[i+1] > 0x10000000)
@@ -163,10 +162,6 @@ void __init prom_init(void)
 	void *reset_vec;
 
 	nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE);
-	if (cpu_is_xlp9xx())
-		xlp_cores_per_node = 32;
-	else
-		xlp_cores_per_node = 8;
 	nlm_init_boot_cpu();
 	xlp_mmu_init();
 	nlm_node_init(0);
diff --git a/arch/mips/netlogic/xlp/usb-init-xlp2.c b/arch/mips/netlogic/xlp/usb-init-xlp2.c
index 17ade1ce5dfd..2524939a5e3a 100644
--- a/arch/mips/netlogic/xlp/usb-init-xlp2.c
+++ b/arch/mips/netlogic/xlp/usb-init-xlp2.c
@@ -128,6 +128,9 @@ static void xlp9xx_usb_ack(struct irq_data *data)
 	case PIC_9XX_XHCI_1_IRQ:
 		port_addr = nlm_xlpii_get_usb_regbase(node, 2);
 		break;
+	case PIC_9XX_XHCI_2_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(node, 3);
+		break;
 	default:
 		pr_err("No matching USB irq %d node  %d!\n", irq, node);
 		return;
@@ -222,14 +225,16 @@ static int __init nlm_platform_xlpii_usb_init(void)
 	}
 
 	/* XLP 9XX, multi-node */
-	pr_info("Initializing 9XX USB Interface\n");
+	pr_info("Initializing 9XX/5XX USB Interface\n");
 	for (node = 0; node < NLM_NR_NODES; node++) {
 		if (!nlm_node_present(node))
 			continue;
 		nlm_xlpii_usb_hw_reset(node, 1);
 		nlm_xlpii_usb_hw_reset(node, 2);
+		nlm_xlpii_usb_hw_reset(node, 3);
 		nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_0_IRQ, xlp9xx_usb_ack);
 		nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_1_IRQ, xlp9xx_usb_ack);
+		nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_2_IRQ, xlp9xx_usb_ack);
 	}
 	return 0;
 }
@@ -253,6 +258,9 @@ static void nlm_xlp9xx_usb_fixup_final(struct pci_dev *dev)
 	case 0x22:
 		dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_1_IRQ);
 		break;
+	case 0x23:
+		dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_2_IRQ);
+		break;
 	}
 }
 
diff --git a/arch/mips/netlogic/xlp/wakeup.c b/arch/mips/netlogic/xlp/wakeup.c
index e5f44d2605a8..87d7846af2d0 100644
--- a/arch/mips/netlogic/xlp/wakeup.c
+++ b/arch/mips/netlogic/xlp/wakeup.c
@@ -99,7 +99,7 @@ static int wait_for_cpus(int cpu, int bootcpu)
 	do {
 		notready = nlm_threads_per_core;
 		for (i = 0; i < nlm_threads_per_core; i++)
-			if (cpu_ready[cpu + i] || cpu == bootcpu)
+			if (cpu_ready[cpu + i] || (cpu + i) == bootcpu)
 				--notready;
 	} while (notready != 0 && --count > 0);
 
@@ -111,7 +111,7 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
 	struct nlm_soc_info *nodep;
 	uint64_t syspcibase, fusebase;
 	uint32_t syscoremask, mask, fusemask;
-	int core, n, cpu;
+	int core, n, cpu, ncores;
 
 	for (n = 0; n < NLM_NR_NODES; n++) {
 		if (n != 0) {
@@ -168,7 +168,8 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
 		syscoremask = (1 << hweight32(~fusemask & mask)) - 1;
 
 		pr_info("Node %d - SYS/FUSE coremask %x\n", n, syscoremask);
-		for (core = 0; core < nlm_cores_per_node(); core++) {
+		ncores = nlm_cores_per_node();
+		for (core = 0; core < ncores; core++) {
 			/* we will be on node 0 core 0 */
 			if (n == 0 && core == 0)
 				continue;
@@ -178,8 +179,7 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
 				continue;
 
 			/* see if at least the first hw thread is enabled */
-			cpu = (n * nlm_cores_per_node() + core)
-						* NLM_THREADS_PER_CORE;
+			cpu = (n * ncores + core) * NLM_THREADS_PER_CORE;
 			if (!cpumask_test_cpu(cpu, wakeup_mask))
 				continue;