Merge tag 'omap-for-v3.15/crossbar-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

Merge OMAP crossbar support from Tony Lindgren:

Add support for GIC crossbar that routes interrupts on newer omaps.

Looks like people wanted these merged via the omap tree as it's
the only user for the GIC crossbar.

* tag 'omap-for-v3.15/crossbar-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: DRA: Enable Crossbar IP support for DRA7XX
  ARM: OMAP4+: Correct Wakeup-gen code to use physical irq number
  DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP
  DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs

Signed-off-by: Olof Johansson <olof@lixom.net>

2 files changed, 33 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index bae0d87a38b2..5573c08d3180 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -50,6 +50,11 @@ Optional
   regions, used when the GIC doesn't have banked registers. The offset is
   cpu-offset * cpu-nr.
 
+- arm,routable-irqs : Total number of gic irq inputs which are not directly
+		  connected from the peripherals, but are routed dynamically
+		  by a crossbar/multiplexer preceding the GIC. The GIC irq
+		  input line is assigned dynamically when the corresponding
+		  peripheral's crossbar line is mapped.
 Example:
 
 	intc: interrupt-controller@fff11000 {
@@ -57,6 +62,7 @@ Example:
 		#interrupt-cells = <3>;
 		#address-cells = <1>;
 		interrupt-controller;
+		arm,routable-irqs = <160>;
 		reg = <0xfff11000 0x1000>,
 		      <0xfff10100 0x100>;
 	};
diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
new file mode 100644
index 000000000000..fb88585cfb93
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -0,0 +1,27 @@
+Some socs have a large number of interrupts requests to service
+the needs of its many peripherals and subsystems. All of the
+interrupt lines from the subsystems are not needed at the same
+time, so they have to be muxed to the irq-controller appropriately.
+In such places a interrupt controllers are preceded by an CROSSBAR
+that provides flexibility in muxing the device requests to the controller
+inputs.
+
+Required properties:
+- compatible : Should be "ti,irq-crossbar"
+- reg: Base address and the size of the crossbar registers.
+- ti,max-irqs: Total number of irqs available at the interrupt controller.
+- ti,reg-size: Size of a individual register in bytes. Every individual
+	    register is assumed to be of same size. Valid sizes are 1, 2, 4.
+- ti,irqs-reserved: List of the reserved irq lines that are not muxed using
+		 crossbar. These interrupt lines are reserved in the soc,
+		 so crossbar bar driver should not consider them as free
+		 lines.
+
+Examples:
+		crossbar_mpu: @4a020000 {
+			compatible = "ti,irq-crossbar";
+			reg = <0x4a002a48 0x130>;
+			ti,max-irqs = <160>;
+			ti,reg-size = <2>;
+			ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+		};