diff options
| author | Casey Piper <cpiper@codeaurora.org> | 2014-11-06 14:28:16 -0800 |
|---|---|---|
| committer | David Keitel <dkeitel@codeaurora.org> | 2016-03-23 20:35:59 -0700 |
| commit | 4c024922c0c1b4d55938cedf711f577a0358624b (patch) | |
| tree | 789a2c5f476df58c669355f8bfd99f77aa8ca9d4 /Documentation | |
| parent | 55d7b11d67e46345998e2c73b55e2881d7afc850 (diff) | |
msm: mdss: Add i2c mhl driver MSM8994 fluid configuration
Add support for HDMI to MHL i2c bridge chip on MSM8994
FLUID and enable HDMI on MSM8994 fluid, as it is supported
in conjunction with the MHL bridge chip.
Change-Id: I47d76cc0b507330d4ba10f420d82f9aee6604824
Signed-off-by: Casey Piper <cpiper@codeaurora.org>
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/sii8620-i2c.txt | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/i2c/sii8620-i2c.txt b/Documentation/devicetree/bindings/i2c/sii8620-i2c.txt index 29ce419af086..ccfcc8e85c35 100644 --- a/Documentation/devicetree/bindings/i2c/sii8620-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/sii8620-i2c.txt @@ -3,17 +3,25 @@ Required properties: - compatible: must be "sil,sii-8620" - reg: i2c slave address +- sil,pwr-gpio: MHL power gpio required to power sii8620 +- sil,fw-wake: MHL fw wake gpio going into sii8620 - sil,reset-gpio: MHL reset gpio going into sii8620 for toggling reset pin - sil,irq-gpio: MHL interrupt gpio coming out of sii8620 - sil,i2c_port#: Port number of i2c device +- pinctrl-0: Pin control group to be used for this controller. +- pinctrl-names: Should contain only one value - "mhl_active". Example: i2c@f9923000 { sil,sii-8620@72 { compatible = "sil,sii-8620"; reg = <0x72>; + sil,pwr-gpio = <&pm8994_gpios 2 0>; + sil,fw-wake = <&msm_gpio 38 0>; sil,reset-gpio = <&msm_gpio 58 0>; sil,irq-gpio = <&msm_gpio 57 0>; sil,i2c_port# = <1>; + pinctrl-names = "mhl_active"; + pinctrl-0 = <&mhl_intr_active &mhl_reset_active>; }; }; |