diff options
| author | Dhaval Patel <pdhaval@codeaurora.org> | 2016-04-19 11:45:56 -0700 |
|---|---|---|
| committer | Harsh Sahu <hsahu@codeaurora.org> | 2016-11-11 12:07:41 -0800 |
| commit | a42b1f1045e66dc13b38e1c00a75fe1859d7745d (patch) | |
| tree | 75225f4c5bccc8b2b57ee2f03267e93d67505973 /Documentation/devicetree | |
| parent | 5d2b103d523f4651e9f7101d003ba1377f699206 (diff) | |
msm: mdss: turn off the phy during idle pc only if panel supports
Commit ff19fe24e621ae5dc90f7e45fe4cfe159a647d15 ("mdss:
dsi: turn off phy power supply during static screen")
turns off the dsi phy during idle pc for phy rev 2.0. DSI
lanes are in floating state after dsi phy power off and
all panels may not be able to handle it. This change
allows to turn on the feature based on panel capability.
Change-Id: I9b166df254128a8a53c567f88971779b9ad0f36c
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Diffstat (limited to 'Documentation/devicetree')
| -rw-r--r-- | Documentation/devicetree/bindings/fb/mdss-dsi-panel.txt | 7 |
1 files changed, 6 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/fb/mdss-dsi-panel.txt b/Documentation/devicetree/bindings/fb/mdss-dsi-panel.txt index 56ad8c361219..0174306135c1 100644 --- a/Documentation/devicetree/bindings/fb/mdss-dsi-panel.txt +++ b/Documentation/devicetree/bindings/fb/mdss-dsi-panel.txt @@ -459,7 +459,11 @@ the fps window. fields in the supply entry, refer to the qcom,ctrl-supply-entries binding above. - qcom,config-select: Optional property to select default configuration. - +- qcom,panel-allow-phy-poweroff: A boolean property indicates that panel allows to turn off the phy power + supply during idle screen. A panel should able to handle the dsi lanes + in floating state(not LP00 or LP11) to turn on this property. Software + turns off PHY pmic power supply, phy ldo and DSI Lane ldo during + idle screen (footswitch control off) when this property is enabled. [[Optional config sub-nodes]] These subnodes provide different configurations for a given same panel. Default configuration can be chosen by specifying phandle of the selected subnode in the qcom,config-select. @@ -647,6 +651,7 @@ Example: qcom,suspend-ulps-enabled; qcom,panel-roi-alignment = <4 4 2 2 20 20>; qcom,esd-check-enabled; + qcom,panel-allow-phy-poweroff; qcom,mdss-dsi-panel-status-command = [06 01 00 01 05 00 02 0A 08]; qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode"; qcom,mdss-dsi-panel-status-check-mode = "reg_read"; |