Merge "ARM: dts: msm: Add pcie-ep device for msm8996"

5 files changed, 382 insertions, 14 deletions

diff --git a/arch/arm/boot/dts/qcom/msm8996.dtsi b/arch/arm/boot/dts/qcom/msm8996.dtsi
index 2750b77e29a7..e41105c2727d 100644
--- a/arch/arm/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm/boot/dts/qcom/msm8996.dtsi
@@ -2560,6 +2560,132 @@
 		qcom,ipa-advertise-sg-support;
 	};
 
+	pcie_ep: qcom,pcie-ep@00600000 {
+		compatible = "qcom,pcie-ep";
+
+		reg = <0x0c001000 0x1000>,
+			<0x0c000000 0xf1d>,
+			<0x0c000f20 0xa8>,
+			<0x00600000 0x2000>,
+			<0x00034000 0x4000>,
+			<0x00607000 0x1000>;
+		reg-names = "msi", "dm_core", "elbi", "parf", "phy", "mmio";
+
+		#address-cells = <0>;
+		interrupt-parent = <&pcie_ep>;
+		interrupts = <0 1 2 3 4>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0xffffffff>;
+		interrupt-map = <0 &intc 0 0 247 0
+			    1 &intc 0 0 249 0
+			    2 &intc 0 0 253 0
+			    3 &intc 0 0 254 0
+			    4 &intc 0 0 49 0>;
+
+		interrupt-names ="int_pm_turnoff", "int_dstate_change",
+			"int_link_up", "int_link_down", "int_global";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default
+			&pcie0_wake_default>;
+
+		clkreq-gpio = <&tlmm 36 0>;
+		perst-gpio = <&tlmm 35 0>;
+		wake-gpio = <&tlmm 37 0>;
+
+		gdsc-vdd-supply = <&gdsc_pcie_0>;
+		vreg-1.8-supply = <&pm8994_l12>;
+		vreg-0.9-supply = <&pm8994_l28>;
+
+		qcom,vreg-0.9-voltage-level = <925000 925000 24000>;
+
+		clocks = <&clock_gcc clk_gcc_pcie_0_pipe_clk>,
+			<&clock_gcc clk_gcc_pcie_0_cfg_ahb_clk>,
+			<&clock_gcc clk_gcc_pcie_0_mstr_axi_clk>,
+			<&clock_gcc clk_gcc_pcie_0_slv_axi_clk>,
+			<&clock_gcc clk_gcc_pcie_0_aux_clk>,
+			<&clock_gcc clk_gcc_pcie_clkref_clk>,
+			<&clock_gcc clk_gcc_pcie_phy_reset>,
+			<&clock_gcc clk_gcc_pcie_phy_cfg_ahb_clk>,
+			<&clock_gcc clk_gcc_pcie_phy_aux_clk>;
+
+		clock-names =  "pcie_0_pipe_clk", "pcie_0_cfg_ahb_clk",
+			"pcie_0_mstr_axi_clk", "pcie_0_slv_axi_clk",
+			"pcie_0_aux_clk", "pcie_0_ldo", "pcie_0_phy_reset",
+			"pcie_0_phy_cfg_ahb_clk", "pcie_0_phy_aux_clk";
+
+		resets = <&clock_gcc PCIE_PHY_BCR>,
+			<&clock_gcc PCIE_PHY_COM_BCR>,
+			<&clock_gcc PCIE_PHY_NOCSR_COM_PHY_BCR>,
+			<&clock_gcc PCIE_0_PHY_BCR>;
+
+		reset-names = "pcie_phy_reset", "pcie_phy_com_reset",
+			"pcie_phy_nocsr_com_phy_reset","pcie_0_phy_reset";
+
+		max-clock-frequency-hz = <0>, <0>, <0>, <0>, <1010526>,
+			<0>, <0>, <0>, <0>;
+
+		qcom,msm-bus,name = "pcie-ep";
+		qcom,msm-bus,num-cases = <2>;
+		qcom,msm-bus,num-paths = <1>;
+		qcom,msm-bus,vectors-KBps =
+				<45 512 0 0>,
+				<45 512 500 800>;
+
+		qcom,pcie-link-speed = <0>;
+		qcom,pcie-phy-ver = <4>;
+		qcom,pcie-perst-enum;
+
+		qcom,phy-status-reg = <0x448>;
+		qcom,phy-sequence = <0x400 0x01 0x00
+					0x404 0x01 0x00
+					0x00AC 0x00 0x00
+					0x0034 0x18 0x00
+					0x0174 0x30 0x00
+					0x00B4 0x20 0x00
+					0x1094 0x06 0x00
+					0x00D0 0x19 0x00
+					0x0078 0x3F 0x00
+					0x0084 0x1A 0x00
+					0x0090 0x00 0x00
+					0x010C 0x00 0x00
+					0x0108 0xFF 0x00
+					0x019C 0x01 0x00
+					0x018C 0x00 0x00
+					0x0050 0x04 0x00
+					0x004C 0xff 0x00
+					0x00C8 0x42 0x00
+					0x0128 0x00 0x00
+					0x0148 0x3f 0x00
+					0x0144 0xff 0x00
+					0x000C 0x01 0x00
+					0x0070 0x0f 0x00
+					0x0048 0x0f 0x00
+					0x1248 0x4B 0x00
+					0x120C 0x0A 0x00
+					0x1200 0x0A 0x00
+					0x121C 0x04 0x00
+					0x1210 0x04 0x00
+					0x12D8 0x01 0x00
+					0x12DC 0x00 0x00
+					0x12E0 0xDB 0x00
+					0x12D4 0x77 0x00
+					0x130C 0x80 0x00
+					0x1310 0x1C 0x00
+					0x1314 0x03 0x00
+					0x131C 0x14 0x00
+					0x1054 0x02 0x00
+					0x1068 0x45 0x00
+					0x10AC 0x12 0x00
+					0x0194 0x06 0x00
+					0x1454 0x00 0x00
+					0x1404 0x00 0x00
+					0x400 0x00 0x00
+					0x408 0x03 0x00>;
+
+		status = "disabled";
+	};
+
 	qcom_rng: qrng@83000 {
 		compatible = "qcom,msm-rng";
 		reg = <0x83000 0x1000>;
diff --git a/drivers/platform/msm/ep_pcie/ep_pcie_com.h b/drivers/platform/msm/ep_pcie/ep_pcie_com.h
index 4b89c8636141..0c3fb1676eea 100644
--- a/drivers/platform/msm/ep_pcie/ep_pcie_com.h
+++ b/drivers/platform/msm/ep_pcie/ep_pcie_com.h
@@ -1,4 +1,4 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -101,6 +101,14 @@
 
 #define PCIE20_AUX_CLK_FREQ_REG        0xB40
 
+#define PCIE20_MHISTATUS               0x148
+#define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174
+#define PCIE20_PARF_CFG_BITS           0x210
+
+#define PCIE20_BRIDGE_CTRL_INT_PIN_INT_LINE_REG 0x3C
+#define PCIE20_DEVICE_ID_VENDOR_ID_REG          0x0
+#define PCIE20_L1_SUBSTATES_REG                 0xB44
+
 #define PERST_TIMEOUT_US_MIN	              1000
 #define PERST_TIMEOUT_US_MAX	              1000
 #define PERST_CHECK_MAX_COUNT		      30000
@@ -126,7 +134,7 @@
 
 #define EP_PCIE_LOG_PAGES 50
 #define EP_PCIE_MAX_VREG 2
-#define EP_PCIE_MAX_CLK 6
+#define EP_PCIE_MAX_CLK 8
 #define EP_PCIE_MAX_PIPE_CLK 1
 
 #define EP_PCIE_ERROR -30655
@@ -255,6 +263,12 @@ struct ep_pcie_irq_info_t {
 	u32          num;
 };
 
+struct ep_pcie_phy_info_t {
+	u32	offset;
+	u32	val;
+	u32	delay;
+};
+
 /* pcie endpoint device structure */
 struct ep_pcie_dev_t {
 	struct platform_device       *pdev;
@@ -278,6 +292,9 @@ struct ep_pcie_dev_t {
 	u32                          link_speed;
 	bool                         active_config;
 	bool                         aggregated_irq;
+	u32                          phy_status_reg;
+	u32                          phy_len;
+	struct ep_pcie_phy_info_t	*phy_sequence;
 
 	u32                          rev;
 	u32                          phy_rev;
@@ -356,5 +373,7 @@ extern bool ep_pcie_phy_is_ready(struct ep_pcie_dev_t *dev);
 extern void ep_pcie_reg_dump(struct ep_pcie_dev_t *dev, u32 sel, bool linkdown);
 extern void ep_pcie_debugfs_init(struct ep_pcie_dev_t *ep_dev);
 extern void ep_pcie_debugfs_exit(void);
-
+#ifdef CONFIG_ARCH_MSM8996
+extern void ep_pcie_phy_bringup_port(struct ep_pcie_dev_t *dev);
+#endif
 #endif
diff --git a/drivers/platform/msm/ep_pcie/ep_pcie_core.c b/drivers/platform/msm/ep_pcie/ep_pcie_core.c
index f3cc96c271a7..f6d39031c5d5 100644
--- a/drivers/platform/msm/ep_pcie/ep_pcie_core.c
+++ b/drivers/platform/msm/ep_pcie/ep_pcie_core.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -64,7 +64,9 @@ static struct ep_pcie_clk_info_t
 	{NULL, "pcie_0_slv_axi_clk", 0, true},
 	{NULL, "pcie_0_aux_clk", 1000000, true},
 	{NULL, "pcie_0_ldo", 0, true},
-	{NULL, "pcie_0_phy_reset", 0, false}
+	{NULL, "pcie_0_phy_reset", 0, false},
+	{NULL, "pcie_0_phy_cfg_ahb_clk", 0, false},
+	{NULL, "pcie_0_phy_aux_clk", 0, false}
 };
 
 static struct ep_pcie_clk_info_t
@@ -131,11 +133,18 @@ static int ep_pcie_gpio_init(struct ep_pcie_dev_t *dev)
 		info = &dev->gpio[i];
 
 		if (!info->num) {
-			EP_PCIE_ERR(dev,
-				"PCIe V%d:  the number of gpio %s is invalid\n",
-				dev->rev, info->name);
-			rc = -EINVAL;
-			break;
+			if (i == EP_PCIE_GPIO_MDM2AP) {
+				EP_PCIE_DBG(dev,
+					"PCIe V%d: gpio %s does not exist.\n",
+					dev->rev, info->name);
+				continue;
+			} else  {
+				EP_PCIE_ERR(dev,
+					"PCIe V%d:  the number of gpio %s is invalid\n",
+					dev->rev, info->name);
+				rc = -EINVAL;
+				break;
+			}
 		}
 
 		rc = gpio_request(info->num, info->name);
@@ -451,6 +460,109 @@ static void ep_pcie_bar_init(struct ep_pcie_dev_t *dev)
 	ep_pcie_write_mask(dev->dm_core + PCIE20_MISC_CONTROL_1, BIT(0), 0);
 }
 
+#ifdef CONFIG_ARCH_MSM8996
+static void ep_pcie_core_init(struct ep_pcie_dev_t *dev)
+{
+	u32 regval;
+
+	EP_PCIE_DBG(dev, "PCIe V%d\n", dev->rev);
+
+	/* Configure PCIe to endpoint mode */
+	ep_pcie_write_reg(dev->parf, PCIE20_PARF_DEVICE_TYPE, 0x0);
+
+	/* adjust DBI base address */
+	writel_relaxed(0x0C000000, dev->parf + PCIE20_PARF_DBI_BASE_ADDR);
+
+	/* Configure PCIe core to support 1GB aperture */
+	ep_pcie_write_reg(dev->parf, PCIE20_PARF_SLV_ADDR_SPACE_SIZE,
+			0x40000000);
+
+	/* Disable the debouncers */
+	ep_pcie_write_reg(dev->parf, PCIE20_PARF_DB_CTRL, 0x73);
+
+	/* Enable Auxiliary Power Detect */
+	ep_pcie_write_mask(dev->parf + PCIE20_PARF_SYS_CTRL, 0x10, BIT(4));
+
+	/* Enable the bit to exit l1ss when sending LTR and MSI */
+	ep_pcie_write_mask(dev->parf + PCIE20_PARF_CFG_BITS, 0x2, BIT(1));
+
+	/* Enable CS for RO(CS) register writes */
+	ep_pcie_write_mask(dev->dm_core + PCIE20_MISC_CONTROL_1, 0, BIT(0));
+
+	/* Set the INT_LINE Register field to 0 */
+	ep_pcie_write_mask(dev->dm_core +
+		PCIE20_BRIDGE_CTRL_INT_PIN_INT_LINE_REG, 0xff, 0);
+
+	/* Set the PMC Register - to support PME in D0, D3hot and D3cold */
+	ep_pcie_write_mask(dev->dm_core + PCIE20_CAP_ID_NXT_PTR,
+			0xF8000000, BIT(31) | BIT(30) | BIT(27));
+
+	/* Set the frequency for the AUX clock to 19.2MHz */
+	ep_pcie_write_mask(dev->dm_core + PCIE20_AUX_CLK_FREQ_REG,
+			0x3FF, BIT(4) | BIT(2));
+
+	/* Set the Endpoint L0s Acceptable Latency to 1us (max) */
+	ep_pcie_write_mask(dev->dm_core + PCIE20_DEVICE_CAPABILITIES,
+			0x1C0, BIT(8) | BIT(7) | BIT(6));
+
+	/* Set the Endpoint L1 Acceptable Latency to 2 us (max) */
+	ep_pcie_write_mask(dev->dm_core + PCIE20_DEVICE_CAPABILITIES,
+			0xE00, BIT(11) | BIT(10) | BIT(9));
+
+	/* Set the L0s Exit Latency to 2us-4us = 0x6 */
+	ep_pcie_write_mask(dev->dm_core + PCIE20_LINK_CAPABILITIES,
+			0x38000, BIT(17) | BIT(16));
+
+	/* Set the L1 Exit Latency to be 32us-64 us = 0x6 */
+	ep_pcie_write_mask(dev->dm_core + PCIE20_LINK_CAPABILITIES,
+			0x7000, BIT(14) | BIT(13));
+
+	/* Enable Clock Power Management */
+	ep_pcie_write_mask(dev->dm_core + PCIE20_LINK_CAPABILITIES,
+			0x40000, BIT(18));
+
+	/* Disable CS for RO(CS) register writes */
+	ep_pcie_write_mask(dev->dm_core + PCIE20_MISC_CONTROL_1, BIT(0), 0);
+
+	/* Enable writes for RO(CS2) */
+	ep_pcie_write_mask(dev->elbi + PCIE20_ELBI_CS2_ENABLE, 0, BIT(0));
+
+	/* Set the Common Clock L0s Exit Latency to 2us-4us = 0x6 */
+	ep_pcie_write_mask(dev->dm_core + PCIE20_LINK_CAPABILITIES,
+			0x38000, BIT(17) | BIT(16));
+
+	/* Set the Common Clock L1 Exit Latency to be 32us-64 us = 0x6 */
+	ep_pcie_write_mask(dev->dm_core + PCIE20_LINK_CAPABILITIES,
+			0x7000, BIT(14) | BIT(13));
+
+	/* Disable writes for RO(CS2) */
+	ep_pcie_write_mask(dev->elbi + PCIE20_ELBI_CS2_ENABLE, BIT(0), 0);
+
+	/* T_Power_Off */
+	ep_pcie_write_mask(dev->dm_core + PCIE20_L1_SUBSTATES_REG,
+			BIT(1) | BIT(0), 0);
+
+	/* Set Device ID and Vendor ID */
+	ep_pcie_write_mask(dev->dm_core + PCIE20_MISC_CONTROL_1, 0, BIT(0));
+	ep_pcie_write_reg(dev->dm_core, PCIE20_DEVICE_ID_VENDOR_ID_REG,
+			0x030217cb);
+	ep_pcie_write_mask(dev->dm_core + PCIE20_MISC_CONTROL_1, BIT(0), 0);
+
+	/* Configure link speed */
+	ep_pcie_write_mask(dev->dm_core + PCIE20_LINK_CONTROL2_LINK_STATUS2,
+				0xf, dev->link_speed);
+
+	/* Configure BARs */
+	ep_pcie_bar_init(dev);
+
+	/* Enable MHI clocks */
+	ep_pcie_write_reg(dev->parf, PCIE20_PARF_MHI_CLOCK_RESET_CTRL,
+					BIT(1) | BIT(0));
+
+	ep_pcie_write_reg(dev->mmio, PCIE20_MHISTATUS, 0x0);
+	ep_pcie_write_reg(dev->mmio, PCIE20_BHI_EXECENV, 0x2);
+}
+#else
 static void ep_pcie_core_init(struct ep_pcie_dev_t *dev)
 {
 	EP_PCIE_DBG(dev, "PCIe V%d\n", dev->rev);
@@ -578,6 +690,7 @@ static void ep_pcie_core_init(struct ep_pcie_dev_t *dev)
 
 	ep_pcie_write_reg(dev->dm_core, PCIE20_AUX_CLK_FREQ_REG, 0x14);
 }
+#endif
 
 static void ep_pcie_config_inbound_iatu(struct ep_pcie_dev_t *dev)
 {
@@ -694,6 +807,32 @@ static int ep_pcie_get_resources(struct ep_pcie_dev_t *dev,
 
 	EP_PCIE_DBG(dev, "PCIe V%d\n", dev->rev);
 
+	of_get_property(pdev->dev.of_node, "qcom,phy-sequence", &cnt);
+	if (cnt) {
+		dev->phy_sequence = (struct ep_pcie_phy_info_t *)
+			devm_kzalloc(&pdev->dev, cnt, GFP_KERNEL);
+
+		if (dev->phy_sequence) {
+			dev->phy_len =
+				cnt / sizeof(*dev->phy_sequence);
+
+			of_property_read_u32_array(pdev->dev.of_node,
+				"qcom,phy-sequence",
+				(unsigned int *)dev->phy_sequence,
+				cnt / sizeof(dev->phy_sequence->offset));
+		} else {
+			EP_PCIE_ERR(dev,
+					"PCIe V%d: Failed to alloc mem for phy seq.\n",
+					dev->rev);
+			ret = -ENOMEM;
+			goto out;
+		}
+	} else {
+		EP_PCIE_DBG(dev,
+				"PCIe V%d: phy sequence is not present in DT.\n",
+				dev->rev);
+	}
+
 	cnt = of_property_count_strings((&pdev->dev)->of_node,
 			"clock-names");
 	if (cnt > 0) {
@@ -782,6 +921,7 @@ static int ep_pcie_get_resources(struct ep_pcie_dev_t *dev,
 			EP_PCIE_DBG(dev,
 				"GPIO %s is not supported in this configuration.\n",
 				gpio_info->name);
+			ret = 0;
 		}
 	}
 
@@ -1070,6 +1210,9 @@ int ep_pcie_core_enable_endpoint(enum ep_pcie_options opt)
 		EP_PCIE_INFO(dev, "PCIe V%d: PCIe  PHY is ready!\n", dev->rev);
 	}
 
+#ifdef CONFIG_ARCH_MSM8996
+	ep_pcie_phy_bringup_port(dev);
+#endif
 	ep_pcie_core_init(dev);
 	ep_pcie_config_inbound_iatu(dev);
 
@@ -1977,6 +2120,17 @@ static int ep_pcie_probe(struct platform_device *pdev)
 		EP_PCIE_DBG(&ep_pcie_dev, "PCIe V%d: pcie-link-speed:%d.\n",
 			ep_pcie_dev.rev, ep_pcie_dev.link_speed);
 
+	ret = of_property_read_u32((&pdev->dev)->of_node,
+				"qcom,phy-status-reg",
+				&ep_pcie_dev.phy_status_reg);
+	if (ret)
+		EP_PCIE_DBG(&ep_pcie_dev,
+			"PCIe V%d: phy-status-reg does not exist.\n",
+			ep_pcie_dev.rev);
+	else
+		EP_PCIE_DBG(&ep_pcie_dev, "PCIe V%d: phy-status-reg:0x%x.\n",
+			ep_pcie_dev.rev, ep_pcie_dev.phy_status_reg);
+
 	ep_pcie_dev.phy_rev = 1;
 	ret = of_property_read_u32((&pdev->dev)->of_node,
 				"qcom,pcie-phy-ver",
diff --git a/drivers/platform/msm/ep_pcie/ep_pcie_phy.c b/drivers/platform/msm/ep_pcie/ep_pcie_phy.c
index 83e74f2c7ba7..3dfabd3ed81f 100644
--- a/drivers/platform/msm/ep_pcie/ep_pcie_phy.c
+++ b/drivers/platform/msm/ep_pcie/ep_pcie_phy.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -13,6 +13,7 @@
 /*
  * MSM PCIe PHY endpoint mode
  */
+#include <linux/delay.h>
 
 #include "ep_pcie_com.h"
 #include "ep_pcie_phy.h"
@@ -23,6 +24,28 @@ void ep_pcie_phy_init(struct ep_pcie_dev_t *dev)
 		"PCIe V%d: PHY V%d: Initializing 14nm QMP phy - 100MHz\n",
 		dev->rev, dev->phy_rev);
 
+	if (dev->phy_sequence) {
+		int i;
+		struct ep_pcie_phy_info_t *phy_seq;
+
+		EP_PCIE_DBG(dev,
+				"PCIe V%d: PHY V%d: process the sequence specified by DT.!\n",
+				dev->rev, dev->phy_rev);
+
+		i =  dev->phy_len;
+		phy_seq = dev->phy_sequence;
+		while (i--) {
+			ep_pcie_write_reg(dev->phy,
+				phy_seq->offset,
+				phy_seq->val);
+			if (phy_seq->delay)
+				usleep_range(phy_seq->delay,
+					phy_seq->delay + 1);
+			phy_seq++;
+		}
+		return;
+	}
+
 	ep_pcie_write_reg(dev->phy, PCIE_PHY_SW_RESET, 0x01);
 	ep_pcie_write_reg(dev->phy, PCIE_PHY_POWER_DOWN_CONTROL, 0x01);
 
@@ -104,10 +127,26 @@ void ep_pcie_phy_init(struct ep_pcie_dev_t *dev)
 	ep_pcie_write_reg(dev->phy, PCIE_PHY_START_CONTROL, 0x03);
 }
 
+#ifdef CONFIG_ARCH_MSM8996
+void ep_pcie_phy_bringup_port(struct ep_pcie_dev_t *dev)
+{
+	ep_pcie_write_reg(dev->phy, PCIE_PORT_POWER_DOWN_CONTROL, 0x03);
+	ep_pcie_write_reg(dev->phy, PCIE_PORT_SW_RESET, 0x0);
+	ep_pcie_write_reg(dev->phy, PCIE_PORT_START_CONTROL, 0x0a);
+}
+#endif
+
 bool ep_pcie_phy_is_ready(struct ep_pcie_dev_t *dev)
 {
-	if (readl_relaxed(dev->phy + PCIE_PHY_PCS_STATUS) & BIT(6))
-		return false;
+	u32 offset;
+
+	if (dev->phy_status_reg)
+		offset = dev->phy_status_reg;
 	else
+		offset = PCIE_PHY_PCS_STATUS;
+
+	if (readl_relaxed(dev->phy + offset) & BIT(0))
 		return true;
+	else
+		return false;
 }
diff --git a/drivers/platform/msm/ep_pcie/ep_pcie_phy.h b/drivers/platform/msm/ep_pcie/ep_pcie_phy.h
index 199e0760956a..884f9fdf7dba 100644
--- a/drivers/platform/msm/ep_pcie/ep_pcie_phy.h
+++ b/drivers/platform/msm/ep_pcie/ep_pcie_phy.h
@@ -1,4 +1,4 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -460,4 +460,34 @@
 #define PCIE_PHY_LFPS_PER_TIMER_VAL                    0x9EC
 #define PCIE_PHY_SIGDET_STARTUP_TIMER_VAL              0x9F0
 #define PCIE_PHY_LOCK_DETECT_CONFIG4                   0x9F4
+#ifdef CONFIG_ARCH_MSM8996
+#define QSERDES_TX_RES_CODE_LANE_OFFSET                0x1054
+#define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN    0x1068
+#define QSERDES_TX_LANE_MODE                           0x1094
+#define QSERDES_TX_RCV_DETECT_LVL_2                    0x10AC
+#define QSERDES_RX_UCDR_FO_GAIN_HALF                   0x1200
+#define QSERDES_RX_UCDR_FO_GAIN                        0x120C
+#define QSERDES_RX_UCDR_SO_GAIN_HALF                   0x1210
+#define QSERDES_RX_UCDR_SO_GAIN                        0x121C
+#define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE       0x1248
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL1               0x12D4
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2               0x12D8
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3               0x12DC
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4               0x12E0
+#define QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2            0x130C
+#define QSERDES_RX_SIGDET_ENABLES                      0x1310
+#define QSERDES_RX_SIGDET_CNTRL                        0x1314
+#define QSERDES_RX_SIGDET_LVL                          0x1318
+#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL               0x131C
+#define PCIE_PHY_SW_RESET                              0x400
+#define PCIE_PHY_POWER_DOWN_CONTROL                    0x404
+#define PCIE_PHY_START_CONTROL                         0x408
+#define PCIE_PHY_ENDPOINT_REFCLK_DRIVE                 0x1454
+#define PCIE_PHY_PWRUP_RESET_DLY_TIME_AUXCLK           0x14A0
+#define PCIE_PORT_ENDPOINT_REFCLK_DRIVE                0x1454
+#define PCIE_PORT_POWER_DOWN_CONTROL                   0x1404
+#define PCIE_PORT_SW_RESET                             0x1400
+#define PCIE_PORT_START_CONTROL                        0x1408
+#define PCIE_COM_PCS_READY_STATUS                      0x448
+#endif
 #endif