Merge "wcnss: Update the wcnss wlan module power up sequence"

4 files changed, 253 insertions, 46 deletions

diff --git a/Documentation/devicetree/bindings/wcnss/wcnss-wlan.txt b/Documentation/devicetree/bindings/wcnss/wcnss-wlan.txt
index 061c1d16ad24..46cbc5206be4 100644
--- a/Documentation/devicetree/bindings/wcnss/wcnss-wlan.txt
+++ b/Documentation/devicetree/bindings/wcnss/wcnss-wlan.txt
@@ -12,7 +12,7 @@ Required properties:
              "riva_ccu_base", "pronto_a2xb_base", "pronto_ccpu_base",
              "pronto_saw2_base", "wlan_tx_phy_aborts","wlan_brdg_err_source",
              "wlan_tx_status", "alarms_txctl", "alarms_tactl",
-             "pronto_mcu_base".
+             "pronto_mcu_base", "pronto_qfuse".
 - interupts: Pronto to Apps interrupts for tx done and rx pending.
 - qcom,pronto-vddmx-supply: regulator to supply pronto pll.
 - qcom,pronto-vddcx-supply: voltage corner regulator to supply WLAN/BT/FM
@@ -29,7 +29,7 @@ Required properties:
 - qcom,wcnss-vadc: VADC handle for battery voltage notification APIs.
 - pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
 - pinctrl-names : Names corresponding to the numbered pinctrl states
-- clocks: from common clock binding: handle to xo and rf_clk clocks.
+- clocks: from common clock binding: handle to xo, rf_clk and wcnss snoc clocks.
 - clock-names: Names of all the clocks that are accessed by the subsystem
 - qcom,vdd-voltage-level: This property represents (nominal, min, max) voltage
 for iris and pronto regulators in milli-volts.
@@ -39,11 +39,16 @@ iris and pronto regulators in micro-amps.
 Optional properties:
 - qcom,has-autodetect-xo: boolean flag to determine whether Iris XO auto detect
 should be performed during boot up.
+- qcom,snoc-wcnss-clock-freq: indicates the wcnss snoc clock frequency in Hz.
+If wcnss_snoc clock is specified in the list of clocks, this property needs
+to be set to make it functional.
 - qcom,wlan-rx-buff-count: WLAN RX buffer count is a configurable value,
 using a smaller count for this buffer will reduce the memory usage.
 - qcom,is-pronto-v3: boolean flag to determine the pronto hardware version
 in use. subsequently correct workqueue will be used by DXE engine to push frames
 in TX data path.
+- qcom,is-dual-band-disable: boolean flag to determine the WLAN dual band
+                             capability.
 - qcom,is-pronto-vadc: boolean flag to determine Battery voltage feature
 support for pronto hardware.
 - qcom,wcnss-pm : <Core rail LDO#, PA rail LDO#, XO settling time,
@@ -59,6 +64,10 @@ support for pronto hardware.
 to use for VBATT feature.
 - qcom,has-a2xb-split-reg: boolean flag to determine A2xb split timeout limit
 register is available or not.
+- qcom,wcn-external-gpio-support: boolean flag to determine 3.3v gpio support
+for pronto hardware for a target.
+- qcom,wcn-external-gpio: The wcnss wlan module 3.3v external GPIO for
+the pronto hardware.
 
 Example:
 
@@ -80,6 +89,8 @@ Example:
 
         gpios = <&msmgpio 36 0>, <&msmgpio 37 0>, <&msmgpio 38 0>,
                 <&msmgpio 39 0>, <&msmgpio 40 0>;
+        qcom,wcn-external-gpio = <&msmgpio 64 0>;
+        qcom,wcn-external-gpio-support;
         qcom,has-48mhz-xo;
         qcom,is-pronto-vt;
         qcom,wlan-rx-buff-count = <512>;
@@ -94,7 +105,12 @@ Example:
         clocks = <&clock_rpm clk_xo_wlan_clk>,
                    <&clock_rpm clk_rf_clk2>,
                    <&clock_debug clk_gcc_debug_mux>,
-                   <&clock_gcc clk_wcnss_m_clk>;
-        clock-names = "xo", "rf_clk", "measure", "wcnss_debug";
+                   <&clock_gcc clk_wcnss_m_clk>,
+		   <&clock_gcc clk_snoc_wcnss_a_clk>;
+
+        clock-names = "xo", "rf_clk", "measure", "wcnss_debug",
+			"snoc_wcnss";
+
+	qcom,snoc-wcnss-clock-freq = <200000000>;
 	qcom,wcnss-pm = <11 21 1200 1 1 6>;
     };
diff --git a/drivers/net/wireless/wcnss/wcnss_vreg.c b/drivers/net/wireless/wcnss/wcnss_vreg.c
index 82b90ad00f8b..613f6fbc786c 100644
--- a/drivers/net/wireless/wcnss/wcnss_vreg.c
+++ b/drivers/net/wireless/wcnss/wcnss_vreg.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2011-2015, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2011-2015, 2017 The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -101,6 +101,45 @@ enum {
 	IRIS_3610
 };
 
+static int wcnss_external_gpio_set_state(bool state)
+{
+	int ret;
+	struct wcnss_wlan_config *cfg = wcnss_get_wlan_config();
+
+	if (!cfg)
+		return -EINVAL;
+
+	if (state) {
+		ret = gpio_request(cfg->wcn_external_gpio,
+				   WCNSS_EXTERNAL_GPIO_NAME);
+		if (ret) {
+			pr_err("%s: Can't get GPIO %s, ret = %d\n",
+			       __func__, WCNSS_EXTERNAL_GPIO_NAME, ret);
+			return ret;
+		}
+
+		ret = gpio_direction_output(cfg->wcn_external_gpio,
+					    WCNSS_EXTERNAL_GPIO_DIR_OUT);
+		if (ret) {
+			pr_err("%s: Can't set GPIO %s direction, ret = %d\n",
+			       __func__, WCNSS_EXTERNAL_GPIO_NAME, ret);
+			gpio_free(cfg->wcn_external_gpio);
+			return ret;
+		}
+
+		gpio_set_value(cfg->wcn_external_gpio,
+			       WCNSS_EXTERNAL_GPIO_HIGH);
+	} else {
+		gpio_set_value(cfg->wcn_external_gpio, WCNSS_EXTERNAL_GPIO_LOW);
+		gpio_free(cfg->wcn_external_gpio);
+	}
+
+	pr_debug("%s: %d gpio is now %s\n", __func__,
+		 cfg->wcn_external_gpio,
+		 state ? "enabled" : "disabled");
+
+	return 0;
+}
 
 int xo_auto_detect(u32 reg)
 {
@@ -417,13 +456,19 @@ static void wcnss_vregs_off(struct vregs_info regulators[], uint size,
 		if (regulators[i].state == VREG_NULL_CONFIG)
 			continue;
 
+		if (cfg->wcn_external_gpio_support) {
+			if (!memcmp(regulators[i].name, VDD_PA,
+				    sizeof(VDD_PA)))
+				continue;
+		}
+
 		/* Remove PWM mode */
 		if (regulators[i].state & VREG_OPTIMUM_MODE_MASK) {
-			rc = regulator_set_optimum_mode(
-					regulators[i].regulator, 0);
-			if (rc < 0)
-				pr_err("regulator_set_optimum_mode(%s) failed (%d)\n",
-						regulators[i].name, rc);
+			rc = regulator_set_load(regulators[i].regulator, 0);
+			if (rc < 0) {
+				pr_err("regulator set load(%s) failed (%d)\n",
+				       regulators[i].name, rc);
+			}
 		}
 
 		/* Set voltage to lowest level */
@@ -478,7 +523,13 @@ static int wcnss_vregs_on(struct device *dev,
 	}
 
 	for (i = 0; i < size; i++) {
-			/* Get regulator source */
+		if (cfg->wcn_external_gpio_support) {
+			if (!memcmp(regulators[i].name, VDD_PA,
+				    sizeof(VDD_PA)))
+				continue;
+		}
+
+		/* Get regulator source */
 		regulators[i].regulator =
 			regulator_get(dev, regulators[i].name);
 		if (IS_ERR(regulators[i].regulator)) {
@@ -518,11 +569,11 @@ static int wcnss_vregs_on(struct device *dev,
 
 		/* Vote for PWM/PFM mode if needed */
 		if (voltage_level[i].uA_load && (reg_cnt > 0)) {
-			rc = regulator_set_optimum_mode(regulators[i].regulator,
-					voltage_level[i].uA_load);
+			rc = regulator_set_load(regulators[i].regulator,
+						voltage_level[i].uA_load);
 			if (rc < 0) {
-				pr_err("regulator_set_optimum_mode(%s) failed (%d)\n",
-						regulators[i].name, rc);
+				pr_err("regulator set load(%s) failed (%d)\n",
+				       regulators[i].name, rc);
 				goto fail;
 			}
 			regulators[i].state |= VREG_OPTIMUM_MODE_MASK;
@@ -622,6 +673,12 @@ int wcnss_wlan_power(struct device *dev,
 
 	down(&wcnss_power_on_lock);
 	if (on) {
+		if (cfg->wcn_external_gpio_support) {
+			rc = wcnss_external_gpio_set_state(true);
+			if (rc)
+				return rc;
+		}
+
 		/* RIVA regulator settings */
 		rc = wcnss_core_vregs_on(dev, hw_type,
 			cfg);
@@ -644,6 +701,8 @@ int wcnss_wlan_power(struct device *dev,
 
 	}  else if (is_power_on) {
 		is_power_on = false;
+		if (cfg->wcn_external_gpio_support)
+			wcnss_external_gpio_set_state(false);
 		configure_iris_xo(dev, cfg,
 				WCNSS_WLAN_SWITCH_OFF, NULL);
 		wcnss_iris_vregs_off(hw_type, cfg);
@@ -660,6 +719,8 @@ fail_iris_on:
 	wcnss_core_vregs_off(hw_type, cfg);
 
 fail_wcnss_on:
+	if (cfg->wcn_external_gpio_support)
+		wcnss_external_gpio_set_state(false);
 	up(&wcnss_power_on_lock);
 	return rc;
 }
diff --git a/drivers/net/wireless/wcnss/wcnss_wlan.c b/drivers/net/wireless/wcnss/wcnss_wlan.c
index 9347882fba92..4a08979c249b 100644
--- a/drivers/net/wireless/wcnss/wcnss_wlan.c
+++ b/drivers/net/wireless/wcnss/wcnss_wlan.c
@@ -36,6 +36,7 @@
 #include <linux/qpnp/qpnp-adc.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pm_qos.h>
+#include <linux/bitops.h>
 
 #include <soc/qcom/subsystem_restart.h>
 #include <soc/qcom/subsystem_notif.h>
@@ -56,6 +57,7 @@
 #define WCNSS_PM_QOS_TIMEOUT	15000
 #define IS_CAL_DATA_PRESENT     0
 #define WAIT_FOR_CBC_IND     2
+#define WCNSS_DUAL_BAND_CAPABILITY_OFFSET	BIT(8)
 
 /* module params */
 #define WCNSS_CONFIG_UNSPECIFIED (-1)
@@ -119,6 +121,8 @@ static DEFINE_SPINLOCK(reg_spinlock);
 #define PRONTO_PMU_COM_CSR_OFFSET          0x1040
 #define PRONTO_PMU_SOFT_RESET_OFFSET       0x104C
 
+#define PRONTO_QFUSE_DUAL_BAND_OFFSET	   0x0018
+
 #define A2XB_CFG_OFFSET				0x00
 #define A2XB_INT_SRC_OFFSET			0x0c
 #define A2XB_TSTBUS_CTRL_OFFSET		0x14
@@ -381,6 +385,7 @@ static struct {
 	void __iomem *pronto_saw2_base;
 	void __iomem *pronto_pll_base;
 	void __iomem *pronto_mcu_base;
+	void __iomem *pronto_qfuse;
 	void __iomem *wlan_tx_status;
 	void __iomem *wlan_tx_phy_aborts;
 	void __iomem *wlan_brdg_err_source;
@@ -423,6 +428,9 @@ static struct {
 	int pc_disabled;
 	struct delayed_work wcnss_pm_qos_del_req;
 	struct mutex pm_qos_mutex;
+	struct clk *snoc_wcnss;
+	unsigned int snoc_wcnss_clock_freq;
+	bool is_dual_band_disabled;
 } *penv = NULL;
 
 static ssize_t wcnss_wlan_macaddr_store(struct device *dev,
@@ -595,7 +603,31 @@ void wcnss_pronto_is_a2xb_bus_stall(void *tst_addr, u32 fifo_mask, char *type)
 	}
 }
 
-/* Log pronto debug registers before sending reset interrupt */
+int wcnss_get_dual_band_capability_info(struct platform_device *pdev)
+{
+	u32 reg = 0;
+	struct resource *res;
+
+	res = platform_get_resource_byname(
+			pdev, IORESOURCE_MEM, "pronto_qfuse");
+	if (!res)
+		return -EINVAL;
+
+	penv->pronto_qfuse = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(penv->pronto_qfuse))
+		return -ENOMEM;
+
+	reg = readl_relaxed(penv->pronto_qfuse +
+			PRONTO_QFUSE_DUAL_BAND_OFFSET);
+	if (reg & WCNSS_DUAL_BAND_CAPABILITY_OFFSET)
+		penv->is_dual_band_disabled = true;
+	else
+		penv->is_dual_band_disabled = false;
+
+	return 0;
+}
+
+/* Log pronto debug registers during SSR Timeout CB */
 void wcnss_pronto_log_debug_regs(void)
 {
 	void __iomem *reg_addr, *tst_addr, *tst_ctrl_addr;
@@ -1683,6 +1715,14 @@ int wcnss_wlan_iris_xo_mode(void)
 }
 EXPORT_SYMBOL(wcnss_wlan_iris_xo_mode);
 
+int wcnss_wlan_dual_band_disabled(void)
+{
+	if (penv && penv->pdev)
+		return penv->is_dual_band_disabled;
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(wcnss_wlan_dual_band_disabled);
 
 void wcnss_suspend_notify(void)
 {
@@ -2717,23 +2757,42 @@ wcnss_trigger_config(struct platform_device *pdev)
 	int is_pronto_vadc;
 	int is_pronto_v3;
 	int pil_retry = 0;
-	int has_pronto_hw = of_property_read_bool(pdev->dev.of_node,
-							"qcom,has-pronto-hw");
-
-	is_pronto_vadc = of_property_read_bool(pdev->dev.of_node,
-					       "qcom,is-pronto-vadc");
-
-	is_pronto_v3 = of_property_read_bool(pdev->dev.of_node,
-							"qcom,is-pronto-v3");
-
-	penv->is_vsys_adc_channel = of_property_read_bool(pdev->dev.of_node,
-						"qcom,has-vsys-adc-channel");
-
-	penv->is_a2xb_split_reg = of_property_read_bool(pdev->dev.of_node,
-						"qcom,has-a2xb-split-reg");
+	struct wcnss_wlan_config *wlan_cfg = &penv->wlan_config;
+	struct device_node *node = (&pdev->dev)->of_node;
+	int has_pronto_hw = of_property_read_bool(node, "qcom,has-pronto-hw");
+
+	is_pronto_vadc = of_property_read_bool(node, "qcom,is-pronto-vadc");
+	is_pronto_v3 = of_property_read_bool(node, "qcom,is-pronto-v3");
+
+	penv->is_vsys_adc_channel =
+		of_property_read_bool(node, "qcom,has-vsys-adc-channel");
+	penv->is_a2xb_split_reg =
+		of_property_read_bool(node, "qcom,has-a2xb-split-reg");
+
+	wlan_cfg->wcn_external_gpio_support =
+		of_property_read_bool(node, "qcom,wcn-external-gpio-support");
+	if (wlan_cfg->wcn_external_gpio_support) {
+		if (of_find_property(node, WCNSS_EXTERNAL_GPIO_NAME, NULL)) {
+			wlan_cfg->wcn_external_gpio =
+					of_get_named_gpio(
+						pdev->dev.of_node,
+						WCNSS_EXTERNAL_GPIO_NAME,
+						0);
+			if (!gpio_is_valid(wlan_cfg->wcn_external_gpio)) {
+				pr_err("%s: Invalid %s num defined in DT\n",
+				       __func__, WCNSS_EXTERNAL_GPIO_NAME);
+				ret = -EINVAL;
+				goto fail;
+			}
+		} else {
+			pr_err("%s: %s prop not defined in DT node\n",
+			       __func__, WCNSS_EXTERNAL_GPIO_NAME);
+			goto fail;
+		}
+	}
 
-	if (of_property_read_u32(pdev->dev.of_node,
-			"qcom,wlan-rx-buff-count", &penv->wlan_rx_buff_count)) {
+	if (of_property_read_u32(node, "qcom,wlan-rx-buff-count",
+				 &penv->wlan_rx_buff_count)) {
 		penv->wlan_rx_buff_count = WCNSS_DEF_WLAN_RX_BUFF_COUNT;
 	}
 
@@ -2794,15 +2853,18 @@ wcnss_trigger_config(struct platform_device *pdev)
 		goto fail;
 	}
 
-	index++;
-	ret = wcnss_dt_parse_vreg_level(&pdev->dev, index,
-					"qcom,iris-vddpa-current",
-					"qcom,iris-vddpa-voltage-level",
-					penv->wlan_config.iris_vlevel);
-
-	if (ret) {
-		dev_err(&pdev->dev, "error reading voltage-level property\n");
-		goto fail;
+	if (!wlan_cfg->wcn_external_gpio_support) {
+		index++;
+		ret = wcnss_dt_parse_vreg_level(
+				&pdev->dev, index,
+				"qcom,iris-vddpa-current",
+				"qcom,iris-vddpa-voltage-level",
+				penv->wlan_config.iris_vlevel);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"error reading voltage-level property\n");
+			goto fail;
+		}
 	}
 
 	index++;
@@ -2825,8 +2887,8 @@ wcnss_trigger_config(struct platform_device *pdev)
 	pdata = pdev->dev.platform_data;
 	if (WCNSS_CONFIG_UNSPECIFIED == has_48mhz_xo) {
 		if (has_pronto_hw) {
-			has_48mhz_xo = of_property_read_bool(pdev->dev.of_node,
-							"qcom,has-48mhz-xo");
+			has_48mhz_xo =
+			of_property_read_bool(node, "qcom,has-48mhz-xo");
 		} else {
 			has_48mhz_xo = pdata->has_48mhz_xo;
 		}
@@ -2837,8 +2899,8 @@ wcnss_trigger_config(struct platform_device *pdev)
 	penv->wlan_config.is_pronto_v3 = is_pronto_v3;
 
 	if (WCNSS_CONFIG_UNSPECIFIED == has_autodetect_xo && has_pronto_hw) {
-		has_autodetect_xo = of_property_read_bool(pdev->dev.of_node,
-							"qcom,has-autodetect-xo");
+		has_autodetect_xo =
+			of_property_read_bool(node, "qcom,has-autodetect-xo");
 	}
 
 	penv->thermal_mitigation = 0;
@@ -3118,6 +3180,16 @@ wcnss_trigger_config(struct platform_device *pdev)
 				__func__);
 			goto fail_ioremap2;
 		}
+
+		if (of_property_read_bool(node,
+					  "qcom,is-dual-band-disabled")) {
+			ret = wcnss_get_dual_band_capability_info(pdev);
+			if (ret) {
+				pr_err(
+				"%s: failed to get dual band info\n", __func__);
+				goto fail_ioremap2;
+			}
+		}
 	}
 
 	penv->adc_tm_dev = qpnp_get_adc_tm(&penv->pdev->dev, "wcnss");
@@ -3129,6 +3201,21 @@ wcnss_trigger_config(struct platform_device *pdev)
 		penv->fw_vbatt_state = WCNSS_CONFIG_UNSPECIFIED;
 	}
 
+	penv->snoc_wcnss = devm_clk_get(&penv->pdev->dev, "snoc_wcnss");
+	if (IS_ERR(penv->snoc_wcnss)) {
+		pr_err("%s: couldn't get snoc_wcnss\n", __func__);
+		penv->snoc_wcnss = NULL;
+	} else {
+		if (of_property_read_u32(pdev->dev.of_node,
+					 "qcom,snoc-wcnss-clock-freq",
+					 &penv->snoc_wcnss_clock_freq)) {
+			pr_debug("%s: wcnss snoc clock frequency is not defined\n",
+				 __func__);
+			devm_clk_put(&penv->pdev->dev, penv->snoc_wcnss);
+			penv->snoc_wcnss = NULL;
+		}
+	}
+
 	if (penv->wlan_config.is_pronto_vadc) {
 		penv->vadc_dev = qpnp_get_vadc(&penv->pdev->dev, "wcnss");
 
@@ -3191,6 +3278,38 @@ fail:
 	return ret;
 }
 
+/* Driver requires to directly vote the snoc clocks
+ * To enable and disable snoc clock, it call
+ * wcnss_snoc_vote function
+ */
+void wcnss_snoc_vote(bool clk_chk_en)
+{
+	int rc;
+
+	if (!penv->snoc_wcnss) {
+		pr_err("%s: couldn't get clk snoc_wcnss\n", __func__);
+		return;
+	}
+
+	if (clk_chk_en) {
+		rc = clk_set_rate(penv->snoc_wcnss,
+				  penv->snoc_wcnss_clock_freq);
+		if (rc) {
+			pr_err("%s: snoc_wcnss_clk-clk_set_rate failed =%d\n",
+			       __func__, rc);
+			return;
+		}
+
+		if (clk_prepare_enable(penv->snoc_wcnss)) {
+			pr_err("%s: snoc_wcnss clk enable failed\n", __func__);
+			return;
+		}
+	} else {
+		clk_disable_unprepare(penv->snoc_wcnss);
+	}
+}
+EXPORT_SYMBOL(wcnss_snoc_vote);
+
 /* wlan prop driver cannot invoke cancel_work_sync
  * function directly, so to invoke this function it
  * call wcnss_flush_work function
diff --git a/include/linux/wcnss_wlan.h b/include/linux/wcnss_wlan.h
index c93364b861d9..dbde018af4c6 100644
--- a/include/linux/wcnss_wlan.h
+++ b/include/linux/wcnss_wlan.h
@@ -1,4 +1,4 @@
-/* Copyright (c) 2011-2015, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2011-2017, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -20,6 +20,11 @@
 #define IRIS_REGULATORS		4
 #define PRONTO_REGULATORS	3
 
+#define WCNSS_EXTERNAL_GPIO_NAME "qcom,wcn-external-gpio"
+#define WCNSS_EXTERNAL_GPIO_HIGH 1
+#define WCNSS_EXTERNAL_GPIO_LOW 0
+#define WCNSS_EXTERNAL_GPIO_DIR_OUT 1
+
 enum wcnss_opcode {
 	WCNSS_WLAN_SWITCH_OFF = 0,
 	WCNSS_WLAN_SWITCH_ON,
@@ -38,6 +43,8 @@ struct vregs_level {
 };
 
 struct wcnss_wlan_config {
+	bool	wcn_external_gpio_support;
+	int	wcn_external_gpio;
 	int	use_48mhz_xo;
 	int	is_pronto_vadc;
 	int	is_pronto_v3;
@@ -74,6 +81,8 @@ enum {
 #define HAVE_WCNSS_CAL_DOWNLOAD 1
 #define HAVE_CBC_DONE 1
 #define HAVE_WCNSS_RX_BUFF_COUNT 1
+#define HAVE_WCNSS_SNOC_HIGH_FREQ_VOTING 1
+#define HAVE_WCNSS_5G_DISABLE 1
 #define WLAN_MAC_ADDR_SIZE (6)
 #define WLAN_RF_REG_ADDR_START_OFFSET	0x3
 #define WLAN_RF_REG_DATA_START_OFFSET	0xf
@@ -132,12 +141,14 @@ void wcnss_riva_dump_pmic_regs(void);
 int wcnss_xo_auto_detect_enabled(void);
 u32 wcnss_get_wlan_rx_buff_count(void);
 int wcnss_wlan_iris_xo_mode(void);
+int wcnss_wlan_dual_band_disabled(void);
 void wcnss_flush_work(struct work_struct *work);
 void wcnss_flush_delayed_work(struct delayed_work *dwork);
 void wcnss_init_work(struct work_struct *work , void *callbackptr);
 void wcnss_init_delayed_work(struct delayed_work *dwork , void *callbackptr);
 int wcnss_get_iris_name(char *iris_version);
 void wcnss_dump_stack(struct task_struct *task);
+void wcnss_snoc_vote(bool clk_chk_en);
 
 #ifdef CONFIG_WCNSS_REGISTER_DUMP_ON_BITE
 void wcnss_log_debug_regs_on_bite(void);