qcacld-2.0: CL 3039633 - update fw common interface files

HTT stats for airtime and Thermal Wmi Defs changes

Change-Id: I2505b04e2fd7b405375befcebcef2d24d42ff19f
CRs-fixed: 865207

4 files changed, 89 insertions, 1 deletions

diff --git a/CORE/SERVICES/COMMON/wmi_tlv_defs.h b/CORE/SERVICES/COMMON/wmi_tlv_defs.h
index 3dfe4c584932..fa516fad51be 100644
--- a/CORE/SERVICES/COMMON/wmi_tlv_defs.h
+++ b/CORE/SERVICES/COMMON/wmi_tlv_defs.h
@@ -816,6 +816,10 @@ typedef enum {
     WMITLV_TAG_STRUC_wmi_scan_dbs_duty_cycle_fixed_param,
     WMITLV_TAG_STRUC_wmi_scan_dbs_duty_cycle_param_tlv,
     WMITLV_TAG_STRUC_wmi_pdev_div_get_rssi_antid_fixed_param,
+    WMITLV_TAG_STRUC_wmi_therm_throt_config_request_fixed_param,
+    WMITLV_TAG_STRUC_wmi_therm_throt_level_config_info,
+    WMITLV_TAG_STRUC_wmi_therm_throt_stats_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_therm_throt_level_stats_info,
 } WMITLV_TAG_ID;
 
 /*
@@ -1147,6 +1151,7 @@ typedef enum {
     OP(WMI_SET_INIT_COUNTRY_CMDID) \
     OP(WMI_SET_SCAN_DBS_DUTY_CYCLE_CMDID) \
     OP(WMI_PDEV_DIV_GET_RSSI_ANTID_CMDID) \
+    OP(WMI_THERM_THROT_SET_CONF_CMDID) \
     /* add new CMD_LIST elements above this line */
 
 /*
@@ -1326,6 +1331,7 @@ typedef enum {
     OP(WMI_WLAN_COEX_BT_ACTIVITY_EVENTID) \
     OP(WMI_VDEV_GET_TX_POWER_EVENTID) \
     OP(WMI_OFFCHAN_DATA_TX_COMPLETION_EVENTID) \
+    OP(WMI_THERM_THROT_STATS_EVENTID) \
     /* add new EVT_LIST elements above this line */
 
 
@@ -3303,6 +3309,11 @@ WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_SET_ARP_STAT_CMDID);
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_get_arp_stats_cmd_fixed_param, wmi_vdev_get_arp_stats_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
 WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_GET_ARP_STAT_CMDID);
 
+/* Thermal Throttling SET CONFIG commands. */
+#define WMITLV_TABLE_WMI_THERM_THROT_SET_CONF_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_therm_throt_config_request_fixed_param, wmi_therm_throt_config_request_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_therm_throt_level_config_info, therm_throt_level_config_info, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_THERM_THROT_SET_CONF_CMDID);
 
 /************************** TLV definitions of WMI events *******************************/
 
@@ -4396,6 +4407,12 @@ WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_GET_ARP_STAT_EVENTID);
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_coex_bt_activity_event_fixed_param, wmi_coex_bt_activity_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
 WMITLV_CREATE_PARAM_STRUC(WMI_WLAN_COEX_BT_ACTIVITY_EVENTID);
 
+/* Thermal Throttling stats event */
+#define WMITLV_TABLE_WMI_THERM_THROT_STATS_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_therm_throt_stats_event_fixed_param, wmi_therm_throt_stats_event_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_therm_throt_level_stats_info, therm_throt_level_stats_info, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_THERM_THROT_STATS_EVENTID);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/CORE/SERVICES/COMMON/wmi_unified.h b/CORE/SERVICES/COMMON/wmi_unified.h
index 982da5c2912d..4e51477b445a 100644
--- a/CORE/SERVICES/COMMON/wmi_unified.h
+++ b/CORE/SERVICES/COMMON/wmi_unified.h
@@ -849,6 +849,8 @@ typedef enum {
     WMI_SET_MULTIPLE_MCAST_FILTER_CMDID,
     /** upload a requested section of data from firmware flash to host */
     WMI_READ_DATA_FROM_FLASH_CMDID,
+    /* Thermal Throttling SET CONF commands */
+    WMI_THERM_THROT_SET_CONF_CMDID,
 
     /* GPIO Configuration */
     WMI_GPIO_CONFIG_CMDID=WMI_CMD_GRP_START_ID(WMI_GRP_GPIO),
@@ -1427,6 +1429,9 @@ typedef enum {
     /** event to upload a PKGID to host to identify chip for various products */
     WMI_PKGID_EVENTID,
 
+    /* Thermal Throttling stats event id for every pdev and zones, etc */
+    WMI_THERM_THROT_STATS_EVENTID,
+
     /* GPIO Event */
     WMI_GPIO_INPUT_EVENTID=WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
     /** upload H_CV info WMI event
@@ -18507,6 +18512,70 @@ typedef struct {
  */
 } wmi_scan_dbs_duty_cycle_fixed_param;
 
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_therm_throt_level_config_info */
+    A_UINT32 tlv_header;
+    /**
+      * temperature sensor value in celsius when to exit to lower zone,
+      * this value can be lower than HWM of lower zone as zone overlapping
+      * is permitted by design to provide hysteresis
+      */
+    A_UINT32 temp_lwm;
+    /**
+      * temperature sensor value in celsius when to exit to higher zone,
+      * this value can be higher than LWM of higher zone as zone overlapping
+      * is permitted by design to provide hysteresis
+      */
+    A_UINT32 temp_hwm;
+    A_UINT32 dc_off_percent; /* duty cycle off percent 0-100. 0 means no off, 100 means no on (shutdown the phy) */
+    /** Disable only the transmit queues in firmware that have lower priority than value defined by prio
+       *    Prioritization:
+       *    0 = disable all data tx queues, No Prioritization defined
+       *    1 = disable BK tx queue
+       *    2 = disable BK+BE tx queues
+       *    3 = disable BK+BE+VI tx queues
+       */
+    A_UINT32 prio;
+} wmi_therm_throt_level_config_info;
+
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_therm_throt_config_request_fixed_param */
+    A_UINT32 pdev_id;          /* config for each pdev */
+    A_UINT32 enable;           /* 0:disable, 1:enable */
+    A_UINT32 dc;               /* duty cycle in ms */
+    A_UINT32 dc_per_event;     /* how often (after how many duty cycles) the FW sends stats to host */
+    A_UINT32 therm_throt_levels; /* Indicates the number of thermal zone configuration */
+    /*
+     * Following this structure is the TLV:
+     * struct wmi_therm_throt_level_config_info therm_throt_level_config_info[therm_throt_levels];
+     */
+} wmi_therm_throt_config_request_fixed_param;
+
+/** FW response with the stats event id for every pdev and zones */
+typedef struct {
+    /*  TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_therm_throt_stats_event_fixed_param */
+    A_UINT32 tlv_header;
+    A_UINT32 pdev_id;            /* stats for corresponding pdev*/
+    A_UINT32 temp;               /* Temperature reading in celsius */
+    A_UINT32 level;              /* current thermal throttling level */
+    A_UINT32 therm_throt_levels; /* number of levels in therm_throt_level_stats_info */
+    /* This TLV is followed by another TLV of array of structs
+     * wmi_therm_throt_level_stats_info therm_throt_level_stats_info[therm_throt_levels];
+     */
+} wmi_therm_throt_stats_event_fixed_param;
+
+
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_therm_throt_level_stats_info */
+    A_UINT32 tlv_header;
+    A_UINT32 level_count; /* count of each time thermal throttling entered this state */
+    A_UINT32 dc_count;    /* total number of duty cycles spent in this state. */
+                          /* this number increments by one each time we are in this state and we finish one full duty cycle. */
+} wmi_therm_throt_level_stats_info;
+
 typedef enum {
     WMI_REG_EXT_FCC_MIDBAND = 0,
     WMI_REG_EXT_JAPAN_MIDBAND = 1,
@@ -19117,6 +19186,7 @@ static INLINE A_UINT8 *wmi_id_to_name(A_UINT32 wmi_command)
 		WMI_RETURN_STRING(WMI_OFFCHAN_DATA_TX_SEND_CMDID);
 		WMI_RETURN_STRING(WMI_SET_INIT_COUNTRY_CMDID);
 		WMI_RETURN_STRING(WMI_SET_SCAN_DBS_DUTY_CYCLE_CMDID);
+		WMI_RETURN_STRING(WMI_THERM_THROT_SET_CONF_CMDID);
 	}
 
 	return "Invalid WMI cmd";
diff --git a/CORE/SERVICES/COMMON/wmi_version.h b/CORE/SERVICES/COMMON/wmi_version.h
index d97b8ca71a5a..02919d6b6098 100644
--- a/CORE/SERVICES/COMMON/wmi_version.h
+++ b/CORE/SERVICES/COMMON/wmi_version.h
@@ -36,7 +36,7 @@
 #define __WMI_VER_MINOR_    0
 /** WMI revision number has to be incremented when there is a
  *  change that may or may not break compatibility. */
-#define __WMI_REVISION_ 380
+#define __WMI_REVISION_ 381
 
 /** The Version Namespace should not be normally changed. Only
  *  host and firmware of the same WMI namespace will work
diff --git a/CORE/SERVICES/WMI/wmi_unified.c b/CORE/SERVICES/WMI/wmi_unified.c
index 9ae9f7282248..3bad3b1a04b3 100644
--- a/CORE/SERVICES/WMI/wmi_unified.c
+++ b/CORE/SERVICES/WMI/wmi_unified.c
@@ -748,6 +748,7 @@ static u_int8_t* get_wmi_cmd_string(WMI_CMD_ID wmi_command)
 		CASE_RETURN_STRING(WMI_SET_INIT_COUNTRY_CMDID);
 		CASE_RETURN_STRING(WMI_SET_SCAN_DBS_DUTY_CYCLE_CMDID);
 		CASE_RETURN_STRING(WMI_PDEV_DIV_GET_RSSI_ANTID_CMDID);
+		CASE_RETURN_STRING(WMI_THERM_THROT_SET_CONF_CMDID);
 	}
 	return "Invalid WMI cmd";
 }