diff options
| author | Linux Build Service Account <lnxbuild@quicinc.com> | 2017-08-22 04:11:32 -0700 |
|---|---|---|
| committer | Gerrit - the friendly Code Review server <code-review@localhost> | 2017-08-22 04:11:32 -0700 |
| commit | 9e200511bcc0da9449c2f410a86e7d7221c6b92f (patch) | |
| tree | 7b76006e9839414830f861d8f79c62dca6944d3b | |
| parent | c0ee484da133bcce2c74cfe24559516461809eb4 (diff) | |
| parent | 1cc2028b256a1d3e814db2d572fba374712c14f3 (diff) | |
Merge "ARM: dts: msm: Enable laser sensor on sdm630 MTP"
| -rw-r--r-- | arch/arm/boot/dts/qcom/sdm630-camera-sensor-mtp.dtsi | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom/sdm630-camera-sensor-mtp.dtsi b/arch/arm/boot/dts/qcom/sdm630-camera-sensor-mtp.dtsi index 0275016c9662..32a251f00550 100644 --- a/arch/arm/boot/dts/qcom/sdm630-camera-sensor-mtp.dtsi +++ b/arch/arm/boot/dts/qcom/sdm630-camera-sensor-mtp.dtsi @@ -114,6 +114,26 @@ status = "disabled"; }; + tof0: qcom,tof@29{ + cell-index = <0>; + reg = <0x29>; + compatible = "st,stmvl53l0"; + qcom,cci-master = <0>; + cam_laser-supply = <&pm660l_l8>; + qcom,cam-vreg-name = "cam_laser"; + qcom,cam-vreg-min-voltage = <2800000>; + qcom,cam-vreg-max-voltage = <3400000>; + qcom,cam-vreg-op-mode = <100000>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_tof_active>; + pinctrl-1 = <&cam_tof_suspend>; + stm,irq-gpio = <&tlmm 45 0x2008>; + gpios = <&tlmm 42 0>; + qcom,gpio-req-tbl-num = <0>; + qcom,gpio-req-tbl-flags = <0>; + qcom,gpio-req-tbl-label = "RNG_EN"; + }; + eeprom0: qcom,eeprom@0 { cell-index = <0>; reg = <0>; |