phy: qcom-ufs: add support in UFS PHY for msmcobalt platform

Add support for new QCOM UFS PHY that is used in
future platforms.

Change-Id: I53f162738668ae9f24f5edb9c42a17f947e68b40
Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
[venkatg@codeaurora.org: resolved trivial merge conflict]
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>

5 files changed, 375 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
index 070baf4d7d97..0bc4fdfeed55 100644
--- a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
+++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
@@ -8,7 +8,8 @@ contain a phandle reference to UFS PHY node.
 
 Required properties:
 - compatible        : compatible list, contains "qcom,ufs-phy-qmp-20nm"
-		      or "qcom,ufs-phy-qmp-14nm" according to the relevant phy in use.
+		      or "qcom,ufs-phy-qmp-14nm" or "qcom,ufs-phy-qmp-v3"
+		      according to the relevant phy in use.
 - reg               : should contain PHY register address space (mandatory),
 - reg-names         : indicates various resources passed to driver (via reg proptery) by name.
                       Required "reg-names" is "phy_mem".
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index d7641a31d34c..39b3e1030497 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -373,6 +373,11 @@ choice
 	  This select the type of UFS PHY to be used.
 	  It must match the actual hardware found on your platform.
 
+	config PHY_QCOM_UFS_V3
+	bool "UFS QCOM v3 PHY"
+	help
+	  Select this if your platform has a v3 UFS PHY.
+
 	config PHY_QCOM_UFS_14NM
 	bool "UFS QCOM 14nm PHY"
 	help
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 9abf08d1c12b..4efbdb58ba6a 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
 phy_qcom_ufs_mod-y				+= phy-qcom-ufs.o
 phy_qcom_ufs_mod-$(CONFIG_PHY_QCOM_UFS_20NM)	+= phy-qcom-ufs-qmp-20nm.o
 phy_qcom_ufs_mod-$(CONFIG_PHY_QCOM_UFS_14NM)	+= phy-qcom-ufs-qmp-14nm.o
+phy_qcom_ufs_mod-$(CONFIG_PHY_QCOM_UFS_V3)	+= phy-qcom-ufs-qmp-v3.o
 obj-$(CONFIG_PHY_QCOM_UFS)			+= phy_qcom_ufs_mod.o
 obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
 obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
diff --git a/drivers/phy/phy-qcom-ufs-qmp-v3.c b/drivers/phy/phy-qcom-ufs-qmp-v3.c
new file mode 100644
index 000000000000..0aee89bc15e0
--- /dev/null
+++ b/drivers/phy/phy-qcom-ufs-qmp-v3.c
@@ -0,0 +1,231 @@
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include "phy-qcom-ufs-qmp-v3.h"
+
+#define UFS_PHY_NAME "ufs_phy_qmp_v3"
+
+static
+int ufs_qcom_phy_qmp_v3_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
+					bool is_rate_B)
+{
+	int err;
+	int tbl_size_A, tbl_size_B;
+	struct ufs_qcom_phy_calibration *tbl_A, *tbl_B;
+
+	tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B);
+	tbl_B = phy_cal_table_rate_B;
+
+	tbl_A = phy_cal_table_rate_A;
+	tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A);
+
+	err = ufs_qcom_phy_calibrate(ufs_qcom_phy,
+				     tbl_A, tbl_size_A,
+				     tbl_B, tbl_size_B,
+				     is_rate_B);
+
+	if (err)
+		dev_err(ufs_qcom_phy->dev,
+			"%s: ufs_qcom_phy_calibrate() failed %d\n",
+			__func__, err);
+	return err;
+}
+
+static int ufs_qcom_phy_qmp_v3_init(struct phy *generic_phy)
+{
+	struct ufs_qcom_phy_qmp_v3 *phy = phy_get_drvdata(generic_phy);
+	struct ufs_qcom_phy *phy_common = &phy->common_cfg;
+	int err;
+
+	err = ufs_qcom_phy_init_clks(generic_phy, phy_common);
+	if (err) {
+		dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n",
+			__func__, err);
+		goto out;
+	}
+
+	err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common);
+	if (err) {
+		dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n",
+			__func__, err);
+		goto out;
+	}
+
+out:
+	return err;
+}
+
+static
+void ufs_qcom_phy_qmp_v3_power_control(struct ufs_qcom_phy *phy,
+					 bool power_ctrl)
+{
+	if (!power_ctrl) {
+		/* apply analog power collapse */
+		writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
+		/*
+		 * Make sure that PHY knows its analog rail is going to be
+		 * powered OFF.
+		 */
+		mb();
+	} else {
+		/* bring PHY out of analog power collapse */
+		writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
+
+		/*
+		 * Before any transactions involving PHY, ensure PHY knows
+		 * that it's analog rail is powered ON.
+		 */
+		mb();
+	}
+}
+
+static inline
+void ufs_qcom_phy_qmp_v3_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val)
+{
+	/*
+	 * v3 PHY does not have TX_LANE_ENABLE register.
+	 * Implement this function so as not to propagate error to caller.
+	 */
+}
+
+static
+void ufs_qcom_phy_qmp_v3_ctrl_rx_linecfg(struct ufs_qcom_phy *phy, bool ctrl)
+{
+	u32 temp;
+
+	temp = readl_relaxed(phy->mmio + UFS_PHY_LINECFG_DISABLE);
+
+	if (ctrl) /* enable RX LineCfg */
+		temp &= ~UFS_PHY_RX_LINECFG_DISABLE_BIT;
+	else /* disable RX LineCfg */
+		temp |= UFS_PHY_RX_LINECFG_DISABLE_BIT;
+
+	writel_relaxed(temp, phy->mmio + UFS_PHY_LINECFG_DISABLE);
+	/* make sure that RX LineCfg config applied before we return */
+	mb();
+}
+
+static inline void ufs_qcom_phy_qmp_v3_start_serdes(struct ufs_qcom_phy *phy)
+{
+	u32 tmp;
+
+	tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
+	tmp &= ~MASK_SERDES_START;
+	tmp |= (1 << OFFSET_SERDES_START);
+	writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
+	/* Ensure register value is committed */
+	mb();
+}
+
+static int ufs_qcom_phy_qmp_v3_is_pcs_ready(struct ufs_qcom_phy *phy_common)
+{
+	int err = 0;
+	u32 val;
+
+	err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS,
+		val, (val & MASK_PCS_READY), 10, 1000000);
+	if (err) {
+		dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n",
+			__func__, err);
+		goto out;
+	}
+
+out:
+	return err;
+}
+
+struct phy_ops ufs_qcom_phy_qmp_v3_phy_ops = {
+	.init		= ufs_qcom_phy_qmp_v3_init,
+	.exit		= ufs_qcom_phy_exit,
+	.power_on	= ufs_qcom_phy_power_on,
+	.power_off	= ufs_qcom_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+struct ufs_qcom_phy_specific_ops phy_v3_ops = {
+	.calibrate_phy		= ufs_qcom_phy_qmp_v3_phy_calibrate,
+	.start_serdes		= ufs_qcom_phy_qmp_v3_start_serdes,
+	.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_v3_is_pcs_ready,
+	.set_tx_lane_enable	= ufs_qcom_phy_qmp_v3_set_tx_lane_enable,
+	.ctrl_rx_linecfg	= ufs_qcom_phy_qmp_v3_ctrl_rx_linecfg,
+	.power_control		= ufs_qcom_phy_qmp_v3_power_control,
+};
+
+static int ufs_qcom_phy_qmp_v3_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy *generic_phy;
+	struct ufs_qcom_phy_qmp_v3 *phy;
+	int err = 0;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg,
+				&ufs_qcom_phy_qmp_v3_phy_ops, &phy_v3_ops);
+
+	if (!generic_phy) {
+		dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
+			__func__);
+		err = -EIO;
+		goto out;
+	}
+
+	phy_set_drvdata(generic_phy, phy);
+
+	strlcpy(phy->common_cfg.name, UFS_PHY_NAME,
+		sizeof(phy->common_cfg.name));
+
+out:
+	return err;
+}
+
+static int ufs_qcom_phy_qmp_v3_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy *generic_phy = to_phy(dev);
+	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+	int err = 0;
+
+	err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy);
+	if (err)
+		dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n",
+			__func__, err);
+
+	return err;
+}
+
+static const struct of_device_id ufs_qcom_phy_qmp_v3_of_match[] = {
+	{.compatible = "qcom,ufs-phy-qmp-v3"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_v3_of_match);
+
+static struct platform_driver ufs_qcom_phy_qmp_v3_driver = {
+	.probe = ufs_qcom_phy_qmp_v3_probe,
+	.remove = ufs_qcom_phy_qmp_v3_remove,
+	.driver = {
+		.of_match_table = ufs_qcom_phy_qmp_v3_of_match,
+		.name = "ufs_qcom_phy_qmp_v3",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(ufs_qcom_phy_qmp_v3_driver);
+
+MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP v3");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-qcom-ufs-qmp-v3.h b/drivers/phy/phy-qcom-ufs-qmp-v3.h
new file mode 100644
index 000000000000..1bd6e1d302b7
--- /dev/null
+++ b/drivers/phy/phy-qcom-ufs-qmp-v3.h
@@ -0,0 +1,136 @@
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_QCOM_PHY_QMP_V3_H_
+#define UFS_QCOM_PHY_QMP_V3_H_
+
+#include "phy-qcom-ufs-i.h"
+
+/* QCOM UFS PHY control registers */
+#define COM_OFF(x)	(0x000 + x)
+#define PHY_OFF(x)	(0xC00 + x)
+#define TX_OFF(n, x)	(0x400 + (0x400 * n) + x)
+#define RX_OFF(n, x)	(0x600 + (0x400 * n) + x)
+
+/* UFS PHY QSERDES COM registers */
+#define QSERDES_COM_BG_TIMER			COM_OFF(0x0C)
+#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN		COM_OFF(0x34)
+#define QSERDES_COM_SYS_CLK_CTRL		COM_OFF(0x3C)
+#define QSERDES_COM_PLL_IVCO			COM_OFF(0x48)
+#define QSERDES_COM_LOCK_CMP1_MODE0		COM_OFF(0x4C)
+#define QSERDES_COM_LOCK_CMP2_MODE0		COM_OFF(0x50)
+#define QSERDES_COM_LOCK_CMP3_MODE0		COM_OFF(0x54)
+#define QSERDES_COM_LOCK_CMP1_MODE1		COM_OFF(0x58)
+#define QSERDES_COM_LOCK_CMP2_MODE1		COM_OFF(0x5C)
+#define QSERDES_COM_LOCK_CMP3_MODE1		COM_OFF(0x60)
+#define QSERDES_COM_BG_TRIM			COM_OFF(0x70)
+#define QSERDES_COM_CP_CTRL_MODE0		COM_OFF(0x78)
+#define QSERDES_COM_CP_CTRL_MODE1		COM_OFF(0x7C)
+#define QSERDES_COM_PLL_RCTRL_MODE0		COM_OFF(0x84)
+#define QSERDES_COM_PLL_RCTRL_MODE1		COM_OFF(0x88)
+#define QSERDES_COM_PLL_CCTRL_MODE0		COM_OFF(0x90)
+#define QSERDES_COM_PLL_CCTRL_MODE1		COM_OFF(0x94)
+#define QSERDES_COM_SYSCLK_EN_SEL		COM_OFF(0xAC)
+#define QSERDES_COM_RESETSM_CNTRL		COM_OFF(0xB4)
+#define QSERDES_COM_RESCODE_DIV_NUM		COM_OFF(0xC4)
+#define QSERDES_COM_LOCK_CMP_EN			COM_OFF(0xC8)
+#define QSERDES_COM_LOCK_CMP_CFG		COM_OFF(0xCC)
+#define QSERDES_COM_DEC_START_MODE0		COM_OFF(0xD0)
+#define QSERDES_COM_DEC_START_MODE1		COM_OFF(0xD4)
+#define QSERDES_COM_DIV_FRAC_START1_MODE0	COM_OFF(0xDC)
+#define QSERDES_COM_DIV_FRAC_START2_MODE0	COM_OFF(0xE0)
+#define QSERDES_COM_DIV_FRAC_START3_MODE0	COM_OFF(0xE4)
+#define QSERDES_COM_DIV_FRAC_START1_MODE1	COM_OFF(0xE8)
+#define QSERDES_COM_DIV_FRAC_START2_MODE1	COM_OFF(0xEC)
+#define QSERDES_COM_DIV_FRAC_START3_MODE1	COM_OFF(0xF0)
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0	COM_OFF(0x108)
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0	COM_OFF(0x10C)
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1	COM_OFF(0x110)
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1	COM_OFF(0x114)
+#define QSERDES_COM_VCO_TUNE_CTRL		COM_OFF(0x124)
+#define QSERDES_COM_VCO_TUNE_MAP		COM_OFF(0x128)
+#define QSERDES_COM_VCO_TUNE1_MODE0		COM_OFF(0x12C)
+#define QSERDES_COM_VCO_TUNE2_MODE0		COM_OFF(0x130)
+#define QSERDES_COM_VCO_TUNE1_MODE1		COM_OFF(0x134)
+#define QSERDES_COM_VCO_TUNE2_MODE1		COM_OFF(0x138)
+#define QSERDES_COM_VCO_TUNE_TIMER1		COM_OFF(0x144)
+#define QSERDES_COM_VCO_TUNE_TIMER2		COM_OFF(0x148)
+#define QSERDES_COM_CLK_SELECT			COM_OFF(0x174)
+#define QSERDES_COM_HSCLK_SEL			COM_OFF(0x178)
+#define QSERDES_COM_CORECLK_DIV			COM_OFF(0x184)
+#define QSERDES_COM_SW_RESET			COM_OFF(0x188)
+#define QSERDES_COM_CORE_CLK_EN			COM_OFF(0x18C)
+#define QSERDES_COM_CMN_CONFIG			COM_OFF(0x194)
+#define QSERDES_COM_SVS_MODE_CLK_SEL		COM_OFF(0x19C)
+#define QSERDES_COM_DEBUG_BUS0			COM_OFF(0x1A0)
+#define QSERDES_COM_DEBUG_BUS1			COM_OFF(0x1A4)
+#define QSERDES_COM_DEBUG_BUS2			COM_OFF(0x1A8)
+#define QSERDES_COM_DEBUG_BUS3			COM_OFF(0x1AC)
+#define QSERDES_COM_DEBUG_BUS_SEL		COM_OFF(0x1B0)
+#define QSERDES_COM_CMN_MISC2			COM_OFF(0x1B8)
+#define QSERDES_COM_CORECLK_DIV_MODE1		COM_OFF(0x1BC)
+
+/* UFS PHY registers */
+#define UFS_PHY_PHY_START			PHY_OFF(0x00)
+#define UFS_PHY_POWER_DOWN_CONTROL		PHY_OFF(0x04)
+#define UFS_PHY_TX_LARGE_AMP_DRV_LVL		PHY_OFF(0x2C)
+#define UFS_PHY_TX_SMALL_AMP_DRV_LVL		PHY_OFF(0x34)
+#define UFS_PHY_LINECFG_DISABLE			PHY_OFF(0x130)
+#define UFS_PHY_RX_SIGDET_CTRL2			PHY_OFF(0x140)
+#define UFS_PHY_RX_PWM_GEAR_BAND		PHY_OFF(0x14C)
+#define UFS_PHY_PCS_READY_STATUS		PHY_OFF(0x160)
+
+/* UFS PHY TX registers */
+#define QSERDES_TX_TRANSCEIVER_BIAS_EN			TX_OFF(0, 0x68)
+#define QSERDES_TX_LANE_MODE				TX_OFF(0, 0x98)
+
+/* UFS PHY RX registers */
+#define QSERDES_RX_UCDR_SVS_SO_GAIN_HALF	RX_OFF(0, 0x30)
+#define QSERDES_RX_UCDR_SVS_SO_GAIN_QUARTER	RX_OFF(0, 0x34)
+#define QSERDES_RX_UCDR_SVS_SO_GAIN_EIGHTH	RX_OFF(0, 0x38)
+#define QSERDES_RX_UCDR_SVS_SO_GAIN		RX_OFF(0, 0x3C)
+#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN	RX_OFF(0, 0x40)
+#define QSERDES_RX_UCDR_SO_SATURATION_ENABLE	RX_OFF(0, 0x48)
+#define QSERDES_RX_RX_TERM_BW			RX_OFF(0, 0x90)
+#define QSERDES_RX_RX_EQ_GAIN1_LSB		RX_OFF(0, 0xC4)
+#define QSERDES_RX_RX_EQ_GAIN1_MSB		RX_OFF(0, 0xC8)
+#define QSERDES_RX_RX_EQ_GAIN2_LSB		RX_OFF(0, 0xCC)
+#define QSERDES_RX_RX_EQ_GAIN2_MSB		RX_OFF(0, 0xD0)
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2	RX_OFF(0, 0xD8)
+#define QSERDES_RX_SIGDET_CNTRL			RX_OFF(0, 0x114)
+#define QSERDES_RX_SIGDET_LVL			RX_OFF(0, 0x118)
+#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL	RX_OFF(0, 0x11C)
+#define QSERDES_RX_RX_INTERFACE_MODE		RX_OFF(0, 0x12C)
+
+#define UFS_PHY_RX_LINECFG_DISABLE_BIT		BIT(1)
+
+/*
+ * This structure represents the v3 specific phy.
+ * common_cfg MUST remain the first field in this structure
+ * in case extra fields are added. This way, when calling
+ * get_ufs_qcom_phy() of generic phy, we can extract the
+ * common phy structure (struct ufs_qcom_phy) out of it
+ * regardless of the relevant specific phy.
+ */
+struct ufs_qcom_phy_qmp_v3 {
+	struct ufs_qcom_phy common_cfg;
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = {
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
+};
+
+#endif