ARM: dts: msm: Add the pmfalcon and pm2falcon dtsi files

Add the device nodes for the following peripherals -
pmfalcon - RevID, PON, GPIO, COINCELL, RTC
pm2falcon - RevID, PON, GPIO, PWM, LED, WLED, FLASH

CRs-Fixed: 1070059
Change-Id: I0159eccab5a6263d61e1a226f320212d94bfee7e
Signed-off-by: ansharma <ansharma@codeaurora.org>

3 files changed, 548 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/qcom/msm-pm2falcon.dtsi b/arch/arm/boot/dts/qcom/msm-pm2falcon.dtsi
new file mode 100644
index 000000000000..399892f52b6f
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/msm-pm2falcon.dtsi
@@ -0,0 +1,377 @@
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/msm/power-on.h>
+
+&spmi_bus {
+	qcom,pm2falcon@2 {
+		compatible = "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		pm2falcon_revid: qcom,revid@100 {
+			compatible = "qcom,qpnp-revid";
+			reg = <0x100 0x100>;
+		};
+
+		qcom,power-on@800 {
+			compatible = "qcom,qpnp-power-on";
+			reg = <0x800 0x100>;
+			qcom,secondary-pon-reset;
+			qcom,hard-reset-poweroff-type =
+				<PON_POWER_OFF_SHUTDOWN>;
+		};
+
+		pm2falcon_gpios: gpios {
+			compatible = "qcom,qpnp-pin";
+			gpio-controller;
+			#gpio-cells = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			label = "pm2falcon-gpio";
+
+			gpio@c000 {
+				reg = <0xc000 0x100>;
+				qcom,pin-num = <1>;
+				status = "disabled";
+			};
+
+			gpio@c100 {
+				reg = <0xc100 0x100>;
+				qcom,pin-num = <2>;
+				status = "disabled";
+			};
+
+			gpio@c200 {
+				reg = <0xc200 0x100>;
+				qcom,pin-num = <3>;
+				status = "disabled";
+			};
+
+			gpio@c300 {
+				reg = <0xc300 0x100>;
+				qcom,pin-num = <4>;
+				status = "disabled";
+			};
+
+			gpio@c400 {
+				reg = <0xc400 0x100>;
+				qcom,pin-num = <5>;
+				status = "disabled";
+			};
+
+			gpio@c500 {
+				reg = <0xc500 0x100>;
+				qcom,pin-num = <6>;
+				status = "disabled";
+			};
+
+			gpio@c600 {
+				reg = <0xc600 0x100>;
+				qcom,pin-num = <7>;
+				status = "disabled";
+			};
+
+			gpio@c700 {
+				reg = <0xc700 0x100>;
+				qcom,pin-num = <8>;
+				status = "disabled";
+			};
+
+			gpio@c800 {
+				reg = <0xc800 0x100>;
+				qcom,pin-num = <9>;
+				status = "disabled";
+			};
+
+			gpio@c900 {
+				reg = <0xc900 0x100>;
+				qcom,pin-num = <10>;
+				status = "disabled";
+			};
+
+			gpio@ca00 {
+				reg = <0xca00 0x100>;
+				qcom,pin-num = <11>;
+				status = "disabled";
+			};
+
+			gpio@cb00 {
+				reg = <0xcb00 0x100>;
+				qcom,pin-num = <12>;
+				status = "disabled";
+			};
+
+		};
+	};
+
+	qcom,pm2falcon@3 {
+		compatible ="qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		pm2falcon_pwm_1: pwm@b100 {
+			compatible = "qcom,qpnp-pwm";
+			reg = <0xb100 0x100>,
+			      <0xb042 0x7e>;
+			reg-names = "qpnp-lpg-channel-base",
+					"qpnp-lpg-lut-base";
+			qcom,channel-id = <1>;
+			qcom,supported-sizes = <6>, <9>;
+			qcom,ramp-index = <0>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pm2falcon_pwm_2: pwm@b200 {
+			compatible = "qcom,qpnp-pwm";
+			reg = <0xb200 0x100>,
+			      <0xb042 0x7e>;
+			reg-names = "qpnp-lpg-channel-base",
+					 "qpnp-lpg-lut-base";
+			qcom,channel-id = <2>;
+			qcom,supported-sizes = <6>, <9>;
+			qcom,ramp-index = <1>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pm2falcon_pwm_3: pwm@b300 {
+			compatible = "qcom,qpnp-pwm";
+			reg = <0xb300 0x100>,
+			      <0xb042 0x7e>;
+			reg-names = "qpnp-lpg-channel-base",
+					 "qpnp-lpg-lut-base";
+			qcom,channel-id = <3>;
+			qcom,supported-sizes = <6>, <9>;
+			qcom,ramp-index = <2>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pm2falcon_pwm_4: pwm@b400 {
+			compatible = "qcom,qpnp-pwm";
+			reg = <0xb400 0x100>,
+			      <0xb042 0x7e>;
+			reg-names = "qpnp-lpg-channel-base",
+					 "qpnp-lpg-lut-base";
+			qcom,channel-id = <4>;
+			qcom,supported-sizes = <6>, <9>;
+			qcom,ramp-index = <3>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		qcom,leds@d000 {
+			compatible = "qcom,leds-qpnp";
+			reg = <0xd000 0x100>;
+			label = "rgb";
+			status = "disabled";
+
+			red_led: qcom,rgb_0 {
+				label = "rgb";
+				qcom,id = <3>;
+				qcom,mode = "pwm";
+				pwms = <&pm2falcon_pwm_3 0 0>;
+				qcom,pwm-us = <1000>;
+				qcom,max-current = <12>;
+				qcom,default-state = "off";
+				linux,name = "red";
+				linux,default-trigger =
+					"battery-charging";
+			};
+
+			green_led: qcom,rgb_1 {
+				label = "rgb";
+				qcom,id = <4>;
+				qcom,mode = "pwm";
+				pwms = <&pm2falcon_pwm_2 0 0>;
+				qcom,pwm-us = <1000>;
+				qcom,max-current = <12>;
+				qcom,default-state = "off";
+				linux,name = "green";
+				linux,default-trigger = "battery-full";
+			};
+
+			blue_led: qcom,rgb_2 {
+				label = "rgb";
+				qcom,id = <5>;
+				qcom,mode = "pwm";
+				pwms = <&pm2falcon_pwm_1 0 0>;
+				qcom,pwm-us = <1000>;
+				qcom,max-current = <12>;
+				qcom,default-state = "off";
+				linux,name = "blue";
+				linux,default-trigger = "boot-indication";
+			};
+		};
+
+		pm2falcon_wled: qcom,leds@d800 {
+			compatible = "qcom,qpnp-wled";
+			reg = <0xd800 0x100>,
+				<0xd900 0x100>,
+				<0xdc00 0x100>,
+				<0xde00 0x100>;
+			reg-names = "qpnp-wled-ctrl-base",
+					"qpnp-wled-sink-base",
+					"qpnp-wled-ibb-base",
+					"qpnp-wled-lab-base";
+			interrupts = <0x3 0xd8 0x2>;
+			interrupt-names = "sc-irq";
+			linux,name = "wled";
+			linux,default-trigger = "bkl-trigger";
+			qcom,fdbk-output = "auto";
+			qcom,vref-mv = <350>;
+			qcom,switch-freq-khz = <800>;
+			qcom,ovp-mv = <29500>;
+			qcom,ilim-ma = <980>;
+			qcom,boost-duty-ns = <26>;
+			qcom,mod-freq-khz = <9600>;
+			qcom,dim-mode = "hybrid";
+			qcom,hyb-thres = <625>;
+			qcom,sync-dly-us = <800>;
+			qcom,fs-curr-ua = <25000>;
+			qcom,cons-sync-write-delay-us = <1000>;
+			qcom,en-phase-stag;
+			qcom,led-strings-list = [00 01 02];
+			qcom,en-ext-pfet-sc-pro;
+			status = "ok";
+		};
+
+		flash_led: qcom,leds@d300 {
+			compatible = "qcom,qpnp-flash-led-v2";
+			reg = <0xd300 0x100>;
+			label = "flash";
+			interrupts = <0x3 0xd3 0x0 IRQ_TYPE_EDGE_RISING>,
+					<0x3 0xd3 0x3 IRQ_TYPE_EDGE_RISING>,
+					<0x3 0xd3 0x4 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "led-fault-irq",
+					"all-ramp-down-done-irq",
+					"all-ramp-up-done-irq";
+			qcom,hdrm-auto-mode;
+			qcom,short-circuit-det;
+			qcom,open-circuit-det;
+			qcom,vph-droop-det;
+			qcom,thermal-derate-en;
+			qcom,thermal-derate-current = <200 500 1000>;
+			qcom,isc-delay = <192>;
+			status = "disabled";
+
+			pm2falcon_flash0: qcom,flash_0 {
+				label = "flash";
+				qcom,led-name = "led:flash_0";
+				qcom,max-current = <1500>;
+				qcom,default-led-trigger = "flash0_trigger";
+				qcom,id = <0>;
+				qcom,current-ma = <1000>;
+				qcom,duration-ms = <1280>;
+				qcom,ires-ua = <12500>;
+				qcom,hdrm-voltage-mv = <325>;
+				qcom,hdrm-vol-hi-lo-win-mv = <100>;
+			};
+
+			pm2falcon_flash1: qcom,flash_1 {
+				label = "flash";
+				qcom,led-name = "led:flash_1";
+				qcom,max-current = <1500>;
+				qcom,default-led-trigger = "flash1_trigger";
+				qcom,id = <1>;
+				qcom,current-ma = <1000>;
+				qcom,duration-ms = <1280>;
+				qcom,ires-ua = <12500>;
+				qcom,hdrm-voltage-mv = <325>;
+				qcom,hdrm-vol-hi-lo-win-mv = <100>;
+			};
+
+			pm2falcon_flash2: qcom,flash_2 {
+				label = "flash";
+				qcom,led-name = "led:flash_2";
+				qcom,max-current = <750>;
+				qcom,default-led-trigger = "flash2_trigger";
+				qcom,id = <2>;
+				qcom,current-ma = <500>;
+				qcom,duration-ms = <1280>;
+				qcom,ires-ua = <12500>;
+				qcom,hdrm-voltage-mv = <325>;
+				qcom,hdrm-vol-hi-lo-win-mv = <100>;
+				pinctrl-names = "led_enable","led_disable";
+				pinctrl-0 = <&led_enable>;
+				pinctrl-1 = <&led_disable>;
+			};
+
+			pm2falcon_torch0: qcom,torch_0 {
+				label = "torch";
+				qcom,led-name = "led:torch_0";
+				qcom,max-current = <500>;
+				qcom,default-led-trigger = "torch0_trigger";
+				qcom,id = <0>;
+				qcom,current-ma = <300>;
+				qcom,ires-ua = <12500>;
+				qcom,hdrm-voltage-mv = <325>;
+				qcom,hdrm-vol-hi-lo-win-mv = <100>;
+			};
+
+			pm2falcon_torch1: qcom,torch_1 {
+				label = "torch";
+				qcom,led-name = "led:torch_1";
+				qcom,max-current = <500>;
+				qcom,default-led-trigger = "torch1_trigger";
+				qcom,id = <1>;
+				qcom,current-ma = <300>;
+				qcom,ires-ua = <12500>;
+				qcom,hdrm-voltage-mv = <325>;
+				qcom,hdrm-vol-hi-lo-win-mv = <100>;
+			};
+
+			pm2falcon_torch2: qcom,torch_2 {
+				label = "torch";
+				qcom,led-name = "led:torch_2";
+				qcom,max-current = <500>;
+				qcom,default-led-trigger = "torch2_trigger";
+				qcom,id = <2>;
+				qcom,current-ma = <300>;
+				qcom,ires-ua = <12500>;
+				qcom,hdrm-voltage-mv = <325>;
+				qcom,hdrm-vol-hi-lo-win-mv = <100>;
+				pinctrl-names = "led_enable","led_disable";
+				pinctrl-0 = <&led_enable>;
+				pinctrl-1 = <&led_disable>;
+			};
+
+			pm2falcon_switch0: qcom,led_switch_0 {
+				label = "switch";
+				qcom,led-name = "led:switch_0";
+				qcom,led-mask = <3>;
+				qcom,default-led-trigger = "switch0_trigger";
+				reg0 {
+					regulator-name = "pmfalcon_bob";
+					max-voltage-uv = <3600000>;
+				};
+			};
+
+			pm2falcon_switch1: qcom,led_switch_1 {
+				label = "switch";
+				qcom,led-name = "led:switch_1";
+				qcom,led-mask = <4>;
+				qcom,default-led-trigger = "switch1_trigger";
+				reg0 {
+					regulator-name = "pmfalcon_bob";
+					max-voltage-uv = <3600000>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/msm-pmfalcon.dtsi b/arch/arm/boot/dts/qcom/msm-pmfalcon.dtsi
new file mode 100644
index 000000000000..dec37881249c
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/msm-pmfalcon.dtsi
@@ -0,0 +1,169 @@
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&spmi_bus {
+	qcom,pmfalcon@0 {
+		compatible ="qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		pmfalcon_revid: qcom,revid@100 {
+			compatible = "qcom,qpnp-revid";
+			reg = <0x100 0x100>;
+		};
+
+		qcom,power-on@800 {
+			compatible = "qcom,qpnp-power-on";
+			reg = <0x800 0x100>;
+			interrupts = <0x0 0x8 0x0 IRQ_TYPE_NONE>,
+				     <0x0 0x8 0x1 IRQ_TYPE_NONE>,
+				     <0x0 0x8 0x4 IRQ_TYPE_NONE>,
+				     <0x0 0x8 0x5 IRQ_TYPE_NONE>;
+			interrupt-names = "kpdpwr", "resin",
+					"resin-bark", "kpdpwr-resin-bark";
+			qcom,pon-dbc-delay = <15625>;
+			qcom,system-reset;
+			qcom,store-hard-reset-reason;
+
+			qcom,pon_1 {
+				qcom,pon-type = <0>;
+				qcom,pull-up = <1>;
+				linux,code = <116>;
+			};
+
+			qcom,pon_2 {
+				qcom,pon-type = <1>;
+				qcom,pull-up = <1>;
+				linux,code = <114>;
+			};
+		};
+
+		pmfalcon_gpios: gpios {
+			compatible = "qcom,qpnp-pin";
+			gpio-controller;
+			#gpio-cells = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			label = "pmfalcon-gpio";
+
+			gpio@c000 {
+				reg = <0xc000 0x100>;
+				qcom,pin-num = <1>;
+				status = "disabled";
+			};
+
+			gpio@c100 {
+				reg = <0xc100 0x100>;
+				qcom,pin-num = <2>;
+				status = "disabled";
+			};
+
+			gpio@c200 {
+				reg = <0xc200 0x100>;
+				qcom,pin-num = <3>;
+				status = "disabled";
+			};
+
+			gpio@c300 {
+				reg = <0xc300 0x100>;
+				qcom,pin-num = <4>;
+				status = "disabled";
+			};
+
+			gpio@c400 {
+				reg = <0xc400 0x100>;
+				qcom,pin-num = <5>;
+				status = "disabled";
+			};
+
+			gpio@c500 {
+				reg = <0xc500 0x100>;
+				qcom,pin-num = <6>;
+				status = "disabled";
+			};
+
+			gpio@c600 {
+				reg = <0xc600 0x100>;
+				qcom,pin-num = <7>;
+				status = "disabled";
+			};
+
+			gpio@c700 {
+				reg = <0xc700 0x100>;
+				qcom,pin-num = <8>;
+				status = "disabled";
+			};
+
+			gpio@c800 {
+				reg = <0xc800 0x100>;
+				qcom,pin-num = <9>;
+				status = "disabled";
+			};
+
+			gpio@c900 {
+				reg = <0xc900 0x100>;
+				qcom,pin-num = <10>;
+				status = "disabled";
+			};
+
+			gpio@ca00 {
+				reg = <0xca00 0x100>;
+				qcom,pin-num = <11>;
+				status = "disabled";
+			};
+
+			gpio@cb00 {
+				reg = <0xcb00 0x100>;
+				qcom,pin-num = <12>;
+				status = "disabled";
+			};
+
+			gpio@cc00 {
+				reg = <0xcc00 0x100>;
+				qcom,pin-num = <13>;
+				status = "disabled";
+			};
+		};
+
+		pmfalcon_coincell: qcom,coincell@2800 {
+			compatible = "qcom,qpnp-coincell";
+			reg = <0x2800 0x100>;
+		};
+
+		pmfalcon_rtc: qcom,pmfalcon_rtc {
+			compatible = "qcom,qpnp-rtc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			qcom,qpnp-rtc-write = <0>;
+			qcom,qpnp-rtc-alarm-pwrup = <0>;
+
+			qcom,pmfalcon_rtc_rw@6000 {
+				reg = <0x6000 0x100>;
+			};
+			qcom,pmfalcon_rtc_alarm@6100 {
+				reg = <0x6100 0x100>;
+				interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+			};
+		};
+	};
+
+	qcom,pmfalcon@1 {
+		compatible ="qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/msmfalcon.dtsi b/arch/arm/boot/dts/qcom/msmfalcon.dtsi
index 9d49936d15d2..073419dfc2ce 100644
--- a/arch/arm/boot/dts/qcom/msmfalcon.dtsi
+++ b/arch/arm/boot/dts/qcom/msmfalcon.dtsi
@@ -677,3 +677,5 @@
 &gdsc_gpu_cx {
 	status = "ok";
 };
+#include "msm-pmfalcon.dtsi"
+#include "msm-pm2falcon.dtsi"